Low graphics performance after the setting of the default BIOS satellite L30 - 10W

Similar Questions

• Performance of the fans on Satellite L30-134

  Hello

  I have a question about the performance of the cpu on my L30-134 fans (celeron M 410 @1. 46 ghz). Some users posted similar questions on different laptops series L, but I'd love to hear some comments L30 - 134 user/advice.

  The problem is that by default, the fan does not work on the down low all the time, but it is off and goes on every 2-3 minutes hit RPM high and causing a lot of noise. Sometimes however it works down low most of the time, being really quiet and keep the temperature at 48 to 55 degrees, while during for turning on and off the temperature is 58-65.

  There are two options for cooling in Toshiba Power Saver (which came preinstalled) we're max performance, the other is to optimize the battery. The fan seems to work on the Tower on / disable system regardless of the option selected.
  
  Q1 Do these two options are actually on the fan is constantly working on low speed or activation and deactivation?
  Q2 How can I do the fan runs all the time at low revs?
  Q3 is there third-party security programs to control the fan speed?
  
  PS: I don't have all of the options on the fan speed in the BIOS

  I'd appreciate your comments. It is not fun to have a noisy fan :)

  Hello

  As you have already mentioned the Toshiba Power saver is preinstalled on your device.
  My phone supports also this utility and energy saver controls the speed of the CPU and cooling mode.
  M unit fan starts to turn if the temperature rises to a higher level, but it depends on the use of the laptop. I don t play much games performance, but I use my camera for graphic design. Sometimes, the fans run really fast and long, but sometimes the laptop is quite.
  My support of intelligence tools speed level 4 CPU processing power and cooling method is the value max performance.
  I think the cooling also depends on the environment

  Moreover, I also read a lot of reviews on the cooling fan rotation and. Sometimes, the update of the BIOS changed the performance of fans

  A small comment to Q3: Don t think that any 3rd party application will control the performance of the fans properly. If the energy saver is not installed on the device, the power of Microsoft options are responsible for execution.

• BIOS does not detect not hard drive for laptop after the setting of the default BIOS settings.

  I had my 14.04 installed Ubuntu in my laptop in a reader named «Notebook hard drive» a pre-installed Windows 8. Today I put the default BIOS settings in my phone and when I rebooted it and tried to use Ubuntu by pressing 'F9' key and choosing from the menu of the BIOS I found my 'Notbook HDD"option missing. My disk of Ubuntu is still there, but I have no way to access it. Is there a way I can get it to work?

  Try turning off secure in the BIOS and then start by restarting the laptop.

• Asus Vivo tab RT hardware keyboard stopped working after the default reset and updates.

  Separated from this thread.

  My Asus Vivo tab RT after the default reset and updates my physical keyboard has stopped working.

  but I can use the mouse by using the touchpad the touchpad works a few keys on the keyboard as...

  music, fn, FN + brightness work. but the letter keys are not. When I am pressing on the keys, they make sounds, but does not...!

  Hi Srikanth,

  I understand that you can not use the alphabetic keys on your tablet.

  To better understand the issue, please send us the following information:

  1. You are able to use the external keyboard with the laptop?

  2. Is this problem specific to certain keys or all alphabetic keys have similar problem?

  This problem could occur if the filter key is enabled, please disable filter keys and see if the problem is fix.

  Follow these steps to disable the filter key

  1. Press the Windows key + R.
  2. Type of control
  3. Click ease of access.
  4. Click on change your keyboard works.
  5. Uncheck the box that says Activate FilterKeys.
  6. Click Ok.

  You can also see the following article for some common troubleshooting steps that can be performed on Windows 8.

  http://www.Microsoft.com/hardware/en-IE/help/Windows-8/troubleshooting/keyboard/using-keys

  Hope this helps, get back to us if you need further assistance for Windows.

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• Missing graphics drivers after the upgrade to Windows 8?

  Hey guys,.

  I see several people on the forums of the problems with graphics drivers not installed after the upgrade to Windows 8.

  The first step you want to take, make sure that the laptop is supported by Windows 8.

  You can go HERE and see if your laptop has been tested for Windows 8. If she's GREAT!

  Now, if you're still looking for the graphics drivers according to the processor you have there are several places to look.

  First of all, you want to check the HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.

  If you still don't see the driver referred to in this article, you can see one of these sites according to what processor you have.

  INTEL

  AMD

  Also, if you have Windows 7, you can still follow this post.

  THX

  I hope it's useful!

  THX

• Error with Driver graphics card after the installation of Vista

  Hardware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game. Make sure that you install the latest video card driver and that hardware acceleration is turned on.

  I had downloaded a windows Vista premium edition with my pro key number

  We don't know what that how your computer has been built.

  Try this:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Performance of the game on Satellite Pro P100-439

  Hallo,

  After paying a lot of money for this laptop, it's actually only worse typing Word-texts. There is almost no games that could be played on this laptop, nore wether Fifa 07, Fifa 08, wether Call of Duty 2 nore Red Orchestra (this list is in fact muuuuch longer), most of the time its simly to slow down. graphikcard 512 MB is not a lot if you cann't play anything. I have not now what to do... hope someone can help me, cause, I'm with my nerves on the end.
  Stan

  Published by: Admin on October 6, 2007 08:08

  One question;
  Are you using Vista on this laptop?
  Well, if you bought this phone especially for a game I recommend the installation of Windows XP with the latest graphics drivers and then to try to play all the games.
  As you probably known t the Vista operating system needs a lot more material resources like old operating systems from Ms. This could have a bad influence on the performance of the game.

  Also I recommend you to check this page.
  078 http://www.Computerworld.com/action/article.do?command=viewArticleBasic&articleId=9011 & pageNumber = 1
  On this page you will find an interesting discussion about the game on Vista OS

  _By the way; _
  Microsoft has released a published and patch which solves the problems with the use of virtual address space. This is a reason why some games is crushed or didn't run smoothly on Vista OS

  * + Use of space virtual address in Windows game development + *.
  http://support.Microsoft.com/?scid=kb%3ben-us%3B940105&x=11&y=9

  Best regards

• No sound after the takeover by Satellite C50 - from standby or sleep

  I had downgraded the C50 Toshiba Windows 8 for Windows 7 64-bit and downloaded all the drivers linked from Toshiba's web site, but there is no sound on the phone, after that I have to put the computer on standby or into hibernation. The sound on the right corner icon is present and active.

  I already uninstalled the audio driver in the Device Manager and rebooted the computer.
  This work of t n.
  Also I tried to install a new version of the audio driver Toshiba s website again, once again, no noise.

  If I do a full stop down or restart the laptop the sound is back to normal. Sometimes it is not as well...

  I didn't start-> Run-> enter services.msc. Check the status of the Windows Audio service is started.
  but once again, NO HELP.

  All windows updates are up to date. 7(64bit) is: Windows Ultimate SP1

  I have all the virus scan of the computer, he found nothing.

  I rang Toshiba customer support, they ask for 45 pounds (GBP) to pay for technical assistance.
  It is the stupid things that technical support is payable even though this computer is only 3 weeks.

  Can someone help me then?

  Hello

  What audio device is set as default in Control Panel-> sound-> tab reading after that the system wakes up from mode sleep?

  Check if the speakers are set by default.

  But to be honest, I think that the reading already tab settings are set correctly.

  In my opinion, you must reinstall the entire system once maybe that something was wrong during the first installation, who knows that everything is possible.

  After the new Win 7 installation ensure that the ITD and Toshiba Audio Enhancement Utility and DTS Studio sound driver are installed correctly.

• Satellite L40 - 14 H - do not start after the successful BIOS update

  Hello

  I have Satellite L40 - 14 H which was working fine until I thought to an update of the BIOS will not hurt. Seems I was wrong.

  I downloaded the update to the BIOS, it unzipped in a folder and started the action.

  After a few seconds was asked to wait, and then after few more firm.

  After the reboot, I pressed F2 to enter the BIOS and check that it is version everything was fine, version 2.0 so was I left once the parameters.

  After that, nothing happened.

  I almost tried everything without success. Removed the power and battery power, put their back, but still no start. Just the light of the HARD drive lights up for a few seconds and the cd turns a bit, but after that nothing happens at all and completely the screen is black.

  I don't know anything else to try.

  Please let me know what that can do to restore its functionality without taking it to the service, I can't do it.
  I think that may not be cause of failure of the BIOS update I have seen it is the version and was right.
  Is it possible to reset the BIOS? I need to disassemble the laptop to do this?
  Let me know what to do, I have good experience in such things, but I can't understand this.

  Thanks in advance for any response.

  Kind regards
  Stefan

  Hello

  I agree with Akuma. It really isn't that you can do about it. BIOS problems are complex and cannot be set by the owner of the laptop. Believe me you need professional help with this.
  Contact the closest Toshiba ASP and explain the situation.

• After the closure by Satellite L750D cannot get back in victory when opening again

  Hello

  I have this weird problem when I close my laptop L750D that I can't get back into windows after opening it again. The first seconds after the opening of the laptop, the screen is black but then suddenly shows the login for a short-lived seconds, but then immideately screen fades to gray, then to the dark as his tent to save energy. I can press any button or anything either, but it won't let me in windows.

  So I have to stop the laptop with the power button so that it restarts again. But of course it wil mention that I didn't close properly the last time and pushes me to a safe boot option. Its a new laptop and I cannot find any problems simular anywhere online. Also I gues is a simple parameter or a combination of keys I know of.
  Help, please!

  Very appreciated

  Oxavon

  Hello

  Well, if a new BIOS is available, perform an update.
  Otherwise, I guess that the laptop enter sleep mode after the lid has been closed
  So in this case disabling this could help, but of course, it would be just a temporal solution
  Do who go to control panel-> options and power on the left, click Choose what closing cover

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• After the default values of hotmail to MSN home page

  When you sign in to Hotmail. The loaded page is directed to MSN, I don't want to. I want the default to my homepage. There was formerly a script automatically responsible user when you use the GreaseMonkey add-on. This makes Mozilla go on my default homepage. IE Google. Now I can't stop loading of MSN. Where is the user script? It worked very well, but seems to have disappeared with the release of Mozilla.

  Solved the problem:
  Load of Greasemonkey, ranging using Mozilla > Modules > Get Add-ons.
  Once Greasemonkey is responsible. Go to Mozilla tools > Greasemonkey > manage user Scripts > change scripts. Then copy and paste the following script into the edit box (change the www.google.co.uk to any page you want to go before saving it) after you have saved close to MOzilla and re - open the round is played:

  == UserScript ==
  @name no. MSN with HoTMaiL signout
  @description stops hotmail redirecting you to msn when you disconnect
  @namespace http://userscripts.org/users/7063
  @include https://login.live.com/logout *
  @include http://login.live.com/logout *
  @version 20120913.2350
  @run-at document-start
  == / UserScript ==

  Window.Location = 'http://www.google.co.uk/';

  Tip:
  If you want to use a blank ' subject: empty 'instead of'http://www.hotmail.com/'

• Performance of the laptop battery Satellite A-80-127

  It's a shame to say that the battery of Toshiba Satellite - 80 Notebook in the 6th month of purchase has become quite dead and does not now charge after the use of the battery with the appropriate guidelines.

  With no service center in India, it is simply impossible for me to repair my laptop. Please let me know what I can do to get the status of valid guarantee and get my handy laptop battery.

  Hi Satya

  Well, I put t know how you used the battery, but the fact is that it is very important to remove the battery from the device if the power adapter is plugged.
  But if the battery has a fault warranty covers all replacements.
  I found many partners Toshiba Service in India. You should check this link:

  http://EU.computers.Toshiba-Europe.com--> supported downloads &--> find an authorized Service.
  There you can check Asia. You will find a large number of contacts.

  Good bye