Low/low audio record from sources online w/Sound Recorder (Win7)

Similar Questions

• Low audio on Satellite A100-646

  Hi all

  my laptop with Vista Home Premium has an audio level (reading of cd/dvd, sound system, etc.) which is very low.
  I tried to increase performance with the mixer and update the version finally official 6.0.1.5326 driver (Realtek High Definition Audio), but the results do not change.
  With Windows XP the sound is very good.

  A suggestion?

  Thank you very much
  Concerning

  Fabrizio

  Hi mate,

  I assume that you have installed the drivers from the toshiba driver download site. Maybe you should try the drivers 'real' Realtek that work well on all systems, no matter what manufacturer. (So I made very positive experiences with www.realtek.com drivers, since the drivers of tosh sometimes won´t work, Don t know why...)

  I suggest to check www.realtek.com, download the drivers from there and check if the problem persists. It s probably just a driver issue related and probably easy to solve with the realtek drivers.

  Welcome and good luck

  PS: would be recognizing a few comments if the drivers have worked for you

• Low audio reading

  I do not hear parts of the music as well as I should...

  Hello

  My sound system is strange. A day earlier, the music I listened to sounded very good and correct volumes for each part of the music. A day later, the lead vocal was super quiet, and the background music seemed much stronger than he should be. This happens online, on iTunes, worldwide. What can I do to get back to normal?

  Thank you.

  Hello

  Eventually the solutions here could help your similar problem. Also right-click TaskBar - Manager of tasks
  Process - see if WMplayer.exe or any other drive runs when not started. Check for help
  Windows Media Player to see if the same thing happens to use it.

  How can I stop my music skip or break down when I play?
  http://windowshelp.Microsoft.com/Windows/en-us/help/36db5c82-9247-4346-909a-f87743b653ae1033.mspx#EFC

  1. right click the icon of speaker near right lower clock - peripheral of reading

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  2. check the configuration - Device Manager - sound, video and game controller

  Note name and complete model of the audio device - full decription - now double click it.
  Driver tab - notice the driver version. Then click on set to update driver (maybe nothing like MS is far
  behind the pilots of certification). Then right CLICK on the device - UNINSTALL - REBOOT - it will refresh
  the driver stack.

  Now go to system Maker and look for the updated drivers (or get the same if no new) it will be
  your rescue. Download - SAVE - go to where you put it-RIGHT click in it - RUN AS ADMIN

  Then do the same for the manufacturer of the device (like Realtek or who made the device).

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  
  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Also a right click speaker near clock - reading devices - right click in the boxes area.
  Check see turned off and disconnected devices. Highlight the speaker and down
  Click right properties check parameters for the use of the active device and so on. Also don't
  Ditto to set it up in the bottom left of this box.

  In Control Panel, you can also check for an Audio and sound settings manager.

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/1e87a3e8-c0e8-49af-980F-9eb6686f42d21033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• L50-A-19N satellite can not read audio data from multiple sources

  I can't read the audio data from multiple sources. It is very annoying when I have 2 youtube videos, playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 open media players and 1 youtube video playing, youtube video has no sound...
  It disappears when I plug my headphones...

  I already have all the latest drivers, the DTS driver was last updated was in 2014, his day of February of this year...

  
  
  
  
  
  

  25/02/14

  His Studio in DTS

  DTS Inc.

  Windows 8.1 - 64 Bit

  1.01.2700

  I don't know if this has the feel, but I had his most recent DTS driver that I found, it is not my laptop model, but they all seem to be the same - v1.1.88.0
  I uninstalled the DTS software and still had the same problem, then it is irrelevant on its driver somehow...

  
  
  
  
  
  

  02/10/15

  Audio driver

  Integrated Device Technology Inc.

  Windows 8.1 - 64 Bit

  6.10.6491.0

  Audio driver IDT has more recent release date, but the version of the driver is the same as the 2013 one...
  Why the older drivers of toshiba releaseing as 'NEW '?
  

  2nd is my Advanced settings speakers, nothing has changed when I disabled "allow applications to take exclusive control of this device.
  

  Sorry but I don't understand your problem.
  I tested it on my machine and if I start the music on three different sources (YouTube, player, web radio) I can hear all together, but it makes no sense to listen to music from different sources.

  Or how do understand you?

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• Try to record audio only from a small video clip of a digital camera.

  Try to record audio only from a small video clip of a digital camera.

  How to do it on Vista?

  Hi robt1962,

  Thank you for using answers Forum.

  You may be able to use Windows MovieMaker to extract audio from your video file, depending on the format.

  If you use your favorite search engine and look for "extract the audio from video using windows moviemaker" for more details.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Webcams for video and audio recording

  Hi team,

  I'm new to Microsoft webcams and I am looking to buy a good webcam.  I have the following questions & requirements...

  (1) is the webcam (Microsoft Life Cam HD - 3000) capable of recording audio and video images over distances of 7-8 feet from the source for a period of at least 2 hours?

  (2) are the video and audio, free software or licensed from the webcam as the videos will be uploaded to youtube?  Also the audio must be of good quality.

  (3) I have a small budget for webcams is there any other non-Microsoft Life Cam HD webcams - 3000 Webcam that can do this?

  (4) which is the best MS webcam for video and audio recording that Microsoft offer?

  (5) I have a lenovo w520 (laptop) and a windows 7 (OS).  Microsoft webcams do work on this configuration?

  (6) are there service centers available in India (Bangalore) for the support of these products? Also is there warranty on the product.

  (7) do you need a tripod or stand to place these webcams on?

  Hello

  Thanks for posting the query on Microsoft Community. Sorry for the delay.

  If I understand correctly you want to buy a good quality with low budget webcam. I suggest you go through the link below to select and buy a webcam that works for you.

  With the help of a webcam:

  http://Windows.Microsoft.com/en-us/Windows7/using-webcam

  The Microsoft HD - 3000 cam Life is compatible with Windows 7. Check the link for more information below.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Hardware&Name=Microsoft+LifeCam+Cinema+HD+Webcam&ModelOrVersion=&Vendor=Microsoft&Locale=1033%2C2057%2C3081%2C4105%2C16393&LastSearchTerm=Microsoft%2BLife%2BCam%2BHD%2B-3000%

  2 b & BreadcrumbPath = Microsoft + life + Cam + HD + 3000 + & TempOsid = Windows + 7

  To install Microsoft Life Cam HD - 3000, you can check the link below.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-cinema/H5D-00013#support

  If you have any further questions, contact the Hardware Support team.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• I am facing problem with playback of the audio recorded.

  Original title: sound recording problem

  Use built in mic, I recorded w/vocals/guitar,... and playback starts well, but after a few seconds the sound loses the basis... or low frequencies.

  It is uniform everytime I try. What I am doing wrong?

  Rich

  [Moved from comments]

  Hello

  What version of the Windows operating system is installed on your computer?

  If I understand correctly you are facing some problem with the audio recorded. There is no way to lose the sound after a few seconds; There seems to be a problem with the registration. I suggest you to run the game audio recording Fixit then try to register once more and check if it works.

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  Hope the information is useful.

• Info about Flash P2P live streaming from sources non-webcam

  Hello, I am a student at the University. Our laboratory strives to work on a live p2p streaming using flash p2p features. The media source is not a webcam but a file from a server, which is not directly supported by one of the flash player offers 4 methods (direct routing, multicast, and replication of the object display.) Among the discussions of the forum mentioned, our method is to use NetStream.publish () one data stream and send ("callbackname", data) to all subscribers who are joined to a network group. So, we can use p2p transmission. Now, here are our questions:

  1. we know by MAX 2009 flash video camera p2p multicast implements mechanism pull - push inside that makes full use of the features of p2p as buffer card Exchange. If we use the API NetStream.send () to send data from sources non-webcam, it will also use this pull-push mechanism for sharing data between all peers (subscribers) with appropriate data exchange?

  or more detailedly

  I saw the P2P Gaming Libs to flashrealtime.com. It uses DIRECT_CONNECTIONS when creating NetStream publish-used to send data with a lower latency. My question is if I do not DIRECT_CONNECTIONS, when the NetGroup grow (1000), will be the peers who are not the direct neighbours of the editor in the same data group relay to another using pull-push through card buffer?

  2. I wrote a sample application and send() to provide data only (NetStream.bufferTime = 0) without camera video and audio. When the Publisher sends data in a stantence 'for' (20), subscribers cannot receive about 8 of them. But when I put a timer and send them periodically (for example, 500 ms), subscribers can receive properly. My questions are: is the packet loss caused by unreliable UDP? Can it be solved by putting NetStream.dataReliable = ture? This can completely be solved by putting a timer? How to set the property /Delay programmer? Are all the data being sent is received orderedly?

  I am very appreciated if you can answer my questions? Thank you.

  probably, you mean "If set [you] NetStream.dataReliable to false...." ».  This setting is effective only for the client-server or DIRECT_CONNECTIONS RTMFP NetStreams.  When dataReliable is set to false, (at this time) reliability parameters are similar to "UDP as best effort."  specifically, the data remains in the queue of transmission for a second (or it will be sent to all) and will be broadcast not so lost after the first broadcast.

  NetStream.send reliability for P2P multicast () is determined by the NetStream.multicastWindowDuration property (like all other multicast data).  This parameter sets how long the system will try to get parts before you give up and move on.

• Functional Global run from Source executable vs

  Hello...  Imagine a Global functional simple (shift registers loop not initialized on some time with the internal Structure of a case Set/Get) where, in a case I run the source code and I use the setting mode to enter data in the flowing shift to the relatively high rate register, say once per second.  Then I, running on the same computer, an another bifurcation of the overall even where to get data at a slower pace, I say once per minute...  And in fact, what I'm doing here is to have three different instances, data from Global setting on three different materials and then I use a case set to Get to get all three samples of data at a lower rate (I try only to see the data to change on a second period 60...)  When I'm building it from source code and run it, everything works perfectly...  I put the data of three different instances of the total from three different sources...  Then I translate all together in one place and use a Global example, set to Get to get all three items of data once per minute more...  So far so good..

  But in my real-world deployment, I can't run Source code.  I need compile this code in executable files...  I got it done and tested...  The three different Set executables seem to work very well, but the Get instance in executable form has no data.  I built this test because I realized that I'm not sure how this Global Set/Get functional concept works at the level of the compiled code...  Am I missing something?  It is possible to work somehow?

  What should I do to get the data to be read in the Global functional (Get) when I work at the level of the executable?  Any help on this would be much appreciated... Thanks bob...

  Why do you need 4 executables?

  You could launch each vi dynamically from the main vi, and then they run independent, but still be able to use the FG.

• The audio volume with Windows XP Pro. Result of the SP3 distorted audio recorder?

  Hello.

  Is it me or don't drop result audio volume of my WAV in a Windows XP Pro update. SP3 sound recorder? Is this a bug in this program or something else?

  Also, does anyone know a good free audio program that will make lots more low audio volume in a bunch old WAV files? One is a pain in the abdomen end-to-end. :(

  Thank you in advance. :) Ant @ Ant links fed quality (http://aqfl.net) and The Ant Farm (http://antfarm.ma.cx).

  Audacity will do what you want - a good. Its freeware and is a full blown audio editor. You need to normalize your track and to use a negative value to reduce the volume.

  http://Audacity.sourceforge.NET/

  One thing though: If your wav file already has a built-in distortion (that is to say "clipping" - when some parts of the song go above 0 dbl and so distort) nothing you do will get rid of the break of the said.

  You can see this by looking at the waveform track in Audacity. Is there is no flat areas where there should be highs, and they are above 0dbl then your track is cut off and there is a high risk of distortion. Is there is no flat areas (only the peaks) then your track should be ok (as long as they are not above 0dbl) and you can 'normalize' it.

  Try Googling "normalize batch file" (or similar), you can find what you want.

  See you soon,.

  Denys

• Select the audio recording device

  I have inspiron 1501 (a new replacement), with 32-bit amd anthlon, windows vista OS.

  My micro phone volume was very low, the person on the voice chat could not hear it. I tried to make it work properly, by mistake, I disabled the device for registration of the properties. now I don't know how to re - activate again. It gives the message that no audio device is installed. I think by the upgrade of a link to forums to dell than the old problem will be over, but I do not know where to install the audio recording device. I tried the installation of equipment as well, but did not work.

  laasa.

  
  

• How to stop Audio recording when no sound is detected

  Hello friends,

  I want to develop the application which is record audio (implementation of this part, I already had)... but I want to stop recording when device has been not detect any noise over 2 sec audio...

  I already convert the data byte in data short tosigned that is giving me the length of the sound...

  int level = (signedShortToInt (b) * 100 / 32767); b is the data buffer

  mutable public static int signedShortToInt (byte [] b) {}
  result int = (b [0] & 0xff). (b [1] & 0xff)<>
  return the result;
  }

  I'm familiar with the sound of noise of air is in normal recording...

  Air noise level not more than 100 (im guessing).

  so I had checked the voice level is below 100 it will stop recording...

  My idea is correct or not?

  private void jesuissuper (byte [] buffer) {}
   
  for (int i = 0; i)< buffer.length;="" i++)="">
  Byte [] b = new byte [] {[i] buffer, buffer [i + 1]};
  int level = (signedShortToInt (b) * 100 / 32767);
  If (100 > level) {}
  Voice.StopThread ();
  }
  }
  }

  My Question is... How can I stop the recording when the level is low up to 2 sec and it is the Correctmethod to find the sound level?

  Hello guys,.

  I have not found any Solution for this so I drop this idea...

  I had found my solution up to convert PCM ampltude data... Using the Amplitude level I can is find the noise data and hat is given voice. and stop Audio in usin it

  But not audio recorded in the camera store...

  Thank you...

• Audio recording of the amplifier to my G6 Pavilion - 2244 has

  I have a Pavilion laptop, G6 - 2244a.  I connected it to my amp via audio tracks that allows me to the sound of reading through the amplifier that works very well.  I got a bunch of audio recording (Adobe Audition) and I want to be able to record audio from my amp directly to my package for registration but all it does record using micro computers, not directly through the audio leads.  I visited HER in control PANEL and selected STEREO MIX, but nothing seems to come through.  I used to have the same game on my desktop that works wonders, doesn't understand why I can't make it work here.  Any help is welcome.

  CDJ400

  Desktop computers come with Line-in, Microphone and speakers. the online help, you can enter the sound. Laptop does not come with the Line-in. It comes with Microphone and speakers. If you want to save, you must connect to the Microphone.

• The logic using Soundflower audio recording system

  Let's start with the agreement that I must be a fool.

  I found tutorials on the net for logic audio recording using sound flower and it seems very simple.

  I actually have to make what I want sometimes.

  For the life of me I can't recreate my past successes.

  I'm to the point of madness here.

  I want to just record from Chrome, etc... any audio system, the logic.

  Help, please

  Drew

  1 / set your output to the system on your Mac for soundflower.

  (so now if you play a youtube video or a song on iTunes you won't hear anything - as it is realized in SF).

  2. in line with defined preferences of-> audio-> entry to soundflower

  and something other than control panel the value out of logic (built in output is fine)

  3 / create an audio track and assign to its entrance at Gate 1

  4 / record select the track or you can monitor the track entrance. You should now hear any audio playing on your system (from youtube or iTunes etc) (in fact guarded of logic)

  Press R to save it.