Low audio reading

Similar Questions

• Low audio on Satellite A100-646

  Hi all

  my laptop with Vista Home Premium has an audio level (reading of cd/dvd, sound system, etc.) which is very low.
  I tried to increase performance with the mixer and update the version finally official 6.0.1.5326 driver (Realtek High Definition Audio), but the results do not change.
  With Windows XP the sound is very good.

  A suggestion?

  Thank you very much
  Concerning

  Fabrizio

  Hi mate,

  I assume that you have installed the drivers from the toshiba driver download site. Maybe you should try the drivers 'real' Realtek that work well on all systems, no matter what manufacturer. (So I made very positive experiences with www.realtek.com drivers, since the drivers of tosh sometimes won´t work, Don t know why...)

  I suggest to check www.realtek.com, download the drivers from there and check if the problem persists. It s probably just a driver issue related and probably easy to solve with the realtek drivers.

  Welcome and good luck

  PS: would be recognizing a few comments if the drivers have worked for you

• Camileo X 400 camera - low audio volume

  Hello

  I hope someone can point me in the right direction. I recently bought the cameo 400 x and when I download to address book the audio volume is really low.

  I use a new lapel clip microphone that I tried on other audio devices, so it is not at fault. Is there something in settings, etc. that I need to change when you use the micro or I can to increase the volumeon modify the software provided.

  Thank you very much
  Ian

  Have you checked the manual of the Camileo X 400?
  I recommend doing this.

  Unfortunately, it seems that the microphone volume isn't interchangeable.
  Only the sound of the menu can be changed. You can find this option in the configuration menu.

• Quickly and easily adjust levels dB precisely when the heights of low audio clip using?

  Unless I use a height high enough audio clip, it is extremely tedious to achieve a specific level of dB.

  Is it possible to almost instantly making it easy to slip accurately when the height of the clamp is gray low?

  I know that I can in. the volume up and down by using ctrl - and ctrl = but when I do that I see not reassuring display of the confirmation of the dB level.

  Is it possible to this thumb upward or down while seeing the dB display?

  Ian, if you open the Audio pane of the Inspector and use these keyboard shortcuts to adjust, you see move the volume slider and DB digitally edit to the right of the cursor.

  Russ

  Edit: Insert the volume

• Audio reading of LABVIEW (with break and reverse)

  Im trying to build a VI that will play a pre-recorded sound, with the ability to pause, play backwards and go to any part of the audio data and continue playback. (Play in reverse would be a nice feature, but does not really need to be there). Once I understood the procedure, he will fit in with reading video and recorded the data display, so it must be fairly dynamic in the measurement of time of the loop, when added to the output buffer.

  I have what I thought should work (written in LABVIEW 8.6) only I find that the 'writing of audio output' vi is not as expected. My interpretation of the documentation for this vi is that when you enter data in this vi (with zero time-out wired in), he should dump these data in the output buffer and then return to the main program, then these data are playing. However, I find that this does not happen and that the vi takes at least that long to finish than it takes to read data. The rest of the vi is completed in less than a millisecond, then this is definitely the vi that takes all the time. It is causing the sound to be very clicky and sometimes don't even look like a sound vibration.

  I'm using the wrong screws? is there a better way to go to achieve this goal? The VI I wrote is attached. If the sinusoidal signal is set at 500 Hz, it sounds like the sampling frequency is a multiple of this not exactly why it works (Im). If I have the sinusoidal signal set to 501 or 510Hz for example, you hear the problem I described above.

  Just a suggestion.,.

  You could try the windows media player activeX control.  Just load the file you want to play using the nodes property of the activeX control and it does the job remaining.

  I am juice tests the vi you attached and will post back if I have ideas.

• Inspiron 1525 has low audio volume

  Our Inspiron 1525 has always low volume no matter how high the volume control is set and it is always set to the maximum value.

  I noticed this in the past since we bought the machine, but it is not because we use the sound. Know that we have subscribed to NetFlicks, we need a sound volume higher.

  What is the secret to solve this problem? It is sound from the speaker and it AI not corrupted. He is so low the sound cannot be heard.

  John Wirt

  Thank you for this, but this isn't the problem.

  The problem is essentially that make sto Dell want as much out of service customer.

  The solution for low volume on the Inspiron 1525, click with the right button on the speaker icon in the system tray. Then click on sounds, click the Read tab.

  Two options will appear: "Speakers/headphones" and "Digital output devices."

  Select the speakers/headphones and then click Properties.

  On the window that opens, click on, 'levels '.

  You will see two level controls. Increase the speakers and PC speaker maximally. You will notice that "PC Speaker" is at the lowest level possible. That's the problem. Dell wants you to pay $ 60.00 for a tech support call to discover that the default setting for the volume of your PC speakers is the lowest possible.

  After you increase the level for both "speakers" and "Speakers" to the sound of your Inspiron 1525 of level maximum (or any computer Dell laptop you probably) will be loud and clear.

  It comes to make as much money as possible from users making it very difficult to understand what the problem is.

  When you pay your $60, they know exactly where the problem is.

  It is private companies.

  John Wirt

• Low Audio when using Windows Media Center

  Hello world.  I have a question.  When I play a movie DVD or CD or anything audio Windows Media Center on Windows Vista Ultimate 32-bit Edition.  The Audio output is always half of what it is in other programs.

  For example.  When I play music with windows media player, I let my volume of the speaker to about 2.5.  If I play a DVD movie on my computer, I put the volume on the speakers until about 5 # in order to hear the movie.  Then when I return to windows media player volume is very strong (of course because I turned it upward).

  I checked all the audio properties (on the PC under windows), but I can't seem to get the audio level as well as the rest of the Windows Media Center computer?

  No one knows what it wrong here?

  Thank you

  Hi karozans,

  Thanks for posting answers.microsoft.com

  Make sure the appropriate selections are made in the DVD settings and codecs are correct for the file that is being read...

  This is a lot of information on Windows Media Center, and the second link is information about the codecs.

  • http://www.Microsoft.com/windows/windowsmedia/player/FAQ/default.mspx

  http://www.Microsoft.com/windows/windowsmedia/player/FAQ/codec.mspx

  There are many different CODECS out there and search online, using your favorite search engine like www.live.com to "VISTA CODEC PACKS" can find the codec that you need to improve the sound on the videos that are currently playing.  When the right codec also be determine some codec download from a reliable source as the codecs are not created by Microsoft and can be obtained by a third party.

  Please let us know if there is more need information on this issue, or if you do not download the correct codec for the system and the problem persists, please post this information in the forum as well.

  Once again, thank you for answers.microsoft.com display

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Low/low audio record from sources online w/Sound Recorder (Win7)

  Greetings,

  I tried to record audio (music) from sources online by using Sound Recorder in Win7, but the recording level is very low.  I'm not sure if it's a card problem his (chip Conexant HD Audio version 8.50.0) or there are one or more settings in Windows, I missed.

  Tab 'Registration' under 'Sound', 'Stereo Mix' is selected under 'Stereo Mix properties' and 'Levels' Stereo Mix 'Advanced' 100%...under, I chose "2 channels, 24 bit, 48000 Hz" and the two boxes checked under "exclusive Mode".  Everything I need to look?

  Any help is appreciated!

  In windows sound recorder is pretty bad, the limits are endless.

  For great audio/video recording & convertor, download Windows Media Encoder 9 series.

  Microsoft does not offer the encoder, but its public services can be made through the Download Center, use you're looking

  Engine Internet of the encoder, the best bet is http://www.msn.com

  The encoder is just as good as it gets, in addition to recording/encoding/conversion is unlimited, youre HD

  availability of storage is his limit...

  Once installed, windows update will be updates to the encoder...

• N5520 very low Audio with Skype

  I have some audio problems with Skype on my DELL N5520. The sound works perfectly when I watch movies or listen to songs but I get questions when I use Skype. Video is fine but the incoming auido is muffled and low even if the volume is high. I saw a similar problem posted here:

  http://en.community.Dell.com/support-forums/laptop/f/3517/p/19434632/20043822.aspx

  But the solution given here does not solve my problem. In fact, the image provided in this thread of Doroshkea:

  http://community.Skype.com/T5/Windows-desktop-client/no-sound-on-new-Dell-laptop-with-Windows-7/TD-p/349768

  does not show anything in the drop-down menus marked in red. I have 2 other laptops, and they all show different options in the drop-down 'Speakers' menu where I can choose between the speakers or headphones, but I do not understand these options with my N5520. Also, I tried to change the setting of the Volume in the bar below, but which causes only my voice make echo with a lot of distortion and noise on the end of receivers, so I can't change that.

  The sound is clear when I use headphones, but not with built-in speakers.

  Any help will be appreciated.

  Thank you

  rosiee007

  I have some audio problems with Skype on my DELL N5520.

  Hello. Dell support does not list a model named N5520, so I'll assume that you have a 5520 15R model. (Support Dell and Dell sales often use different names for the same model).

  rosiee007

  In fact, the image provided in this thread of Doroshkea:

  http://community.Skype.com/T5/Windows-desktop-client/no-sound-on-new-Dell-laptop-with-Windows-7/TD-p/349768

  does not show anything in the drop-down menus marked in red. I have 2 other laptops, and they all show different options in the drop-down 'Speakers' menu where I can choose between the speakers or headphones, but I do not understand these options with my N5520.

  If anything in the drop-down menus, try to reinstall your sound driver Conexant and then again look at the Skype options. If there is still nothing then try to reinstall Skype. To get your audio driver go 5520 15R download page, select your operating system from the drop-down list box, and then expand the Audio category.

• Low audio problem Windows 7

  Hello

  This is my first time to a post here, so I'll get to the point.

  So, recently, I just had a virus on my laptop, everything is resolved except my audio problem.

  I had to go into "Safe Mode" while the virus was LURKING in my laptop, I had deleted some unwanted files

  It comes from the virus.

  ACCIDENTALLY, I deleted half of what was in my "common files" folder witch was located in:

  C:\Program Files\Common Files

  I have still a few other folders inside this folder... I used to have a lot, and I think that some of them were important.

  Only after that when I rebooted my computer, I realized that my audio seemed low. (My volume was 16% and it is always

  the volume loud enough and perfect for me).

  Also, YES, I tried the troubleshooting method everyone does, and it is always at low volume.

  It does not solve the problem. The same day, I caught the virus, it was withdrawn after a few hours, so all is well.

  Well, there you go, that's my problem. Please any help would be appreciated!

  Hello

  Thanks for the reply.

  In this case, I would say that you want to run system restore to recover all the files. After that, if you have any problem of virus.

  Let us know we will certainly help you.

  Refer to:

  http://Windows.Microsoft.com/en-in/Windows/system-restore-FAQ#1TC=Windows-7

  Note:

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I hope this helps.

  Kind regards
  Anusha

• Error 6 at the ByteArrayInputStream audio reading in 4.3

  Hi all

  We have a weird problem with playback of the audio files via ByteArrayInputStream on a BB Pearl 8130:

  Device: BlackBerry Pearl 8130 (Bell device)

  F/w: 4.3.0.66 (Platform 3.1.0.35)

  JDE: 4.3.0.1r

  Instead of opening and reading a file via MMAPIs Manager.createPlayer (String, locator) we want to load the file on heap memory and read it to there using Manager.createPlayer (stream InputStream, String). File is loaded on the memory of heap in an array of byte [] where the ByteArrayinputStream is created. It works very well on the BB Pearl 8130 with F/W 4.2 (European system) as well as other non-BlackBerry devices.

  On the device, above, that the playerUpdate() of the associated PlayerListener method is called with a PlayerListener.ERROR - livery eventData is 6. Just 6. The file that we tested was an AAC in MP4 container. The codecs used were audio/mp4 and aac audio, video/mp4, audio/mpeg causing all the ominous error message. What does this error message mean?

  Thank you for your response.

  Frank,

  During playback via an underlying location implementation in the JSR-135 can create an identifiable source of data for the player.  However, if you specify an InputStream and the format of the file is such that the implementation of the JSR-135 should be able to search inside then you will receive this error.

• NFC tags low level read/write operations

  Hello
  
  I know it's little bit offtopic question - but since you are experts in the field I will try you may ask a simple question:
  
  1 / I want to know what protocol is used to read/write for the NFC operations, tags are used. According to my understanding after that the label is placed on the NFC (NFC, USB drive phone) reader, it is powered and set to the ready state. The application protocol for read-write operation is used. As I think that the format and content of the commands used to read/write is not specified in the ISO 14443 and it is based on a material/manufacturer and will be different for FeliCa, Mifare, Innovision, etc tags, so there is no way how to handle read/write NFC tags with unique implementation operations. This hypothesis is correct?
  
  2 / are there tags, that supports the 4 7816 APDU commands for read/write operations?
  
  
  Thanks for the reply
  Kind regards
  STeN

  Hello

  To read the NFC forum specifications. It will be better explained than by me.

  several protocols are used according to the contactless front-end configuration and capabilities. It includes ISO14443-A, ISO14443-B and Felica. Sometimes the other protocols are also available, for example Innovatron (not Innovision lol)

  Mifare is not a Protocol, it is a line of NXP products. These products use the lower layers of the ISO14443-A protocol specification.

  There are 4 types of tags

  (1) using the lower layers of the ISO14443-A
  (2) using the lower layers of the ISO14443-B
  (3) something related to felica?
  don't know exactly on these 3, you should read the specs. Everything is clearly understandable, not like ETSI.

  (4) something using commands ISO7816-4 on top A ISO14443 or B or others. You must SELECT, BINARY, BINARY update READ. You can implement using javacard, I did it and it works. You need two binary files, which can be hard-coded.

  Concerning
  Sébastien

• Matte & low - audio sounding after export

  Hello

  I am editing in Premiere Pro CS4. If you see the images below, it will tell you a little more about the system and the parameters I use. I gave my client a DVD and she complained the audio. I asked him to send me a description of what she was not happy, and she wrote this: "with audio, the sound quality was lost, it was not loud and clear. And the base and the beats were very low. Came out very thud '. Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  My original audio peaked like this:

  

  I asked someone what was the best level to set in and he said that he peak at-6. So now my audio picks like this:

  

  After the filing of the complaint, I asked a few more people, and they said that the green audio level should be level 6. So now my audio picks like this:

  

  Now I don't know if the settings above have solved the problem, but at least on the computer, it sounds better.

  It's the Premiere version I use:

  

  This is some info about my computer:

  

  Properties of the file prior to export:

  

  Properties of the file after export:

  

  Project settings:

  

  

  

  Here is my export settings:

  

  

  

  I hope that is enough info and I appreciate all help. Let me know if you need me to gather more information.

  --------------------------

  Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  --------------------

  My question is, "How can I get my audio to sound more gutsy (base more, harder,)"

  ------------------------

  you accidentally fall in love with talent?  Is not of the never before seen in the film industry... where criticism becomes something "personal" between the Director / shooter (you) and talent...?

  Perhaps you could get closer?

• low audio on my computer hp laptop pavilion g4-1201tx

  I use hp pavilion g4-1201tx, window 7 ultimate 64 bit.

  My speakers produced his least when I play videos, this question is for 2 months and day after day sound from my speakers are reducing.
  

  Hello

  Try to uninstall and reinstall the sound drivers...

  To uninstall go to control panel = > programs and features = > find the IDT Audio and uninstall (if the Wizard Uninstall displays a checkbox then check it)...

  Restart the computer and download the audio driver for your laptop from the link below and check...

  Driver high definition Audio (HD) DT

  If the problem persists, you can try the steps in this link:

  HP Notebook PC - solving Audio problems with external speakers, headphones, and HDMI Sound Devices

• Tecra M11 - very low audio volume

  I have a Tecra M11 for a few months and I am overall very happy with my new laptop.

  A question I have is the speaker volume level. When I play the video or the sound of music is about audible, even with the speakers lining and the relevant channels appeared in the volume mixer in Windows 7.

  When I open volume mixer I see that the speaker volume is at max, where is the application that plays music. I can't bar which moves vertically to show the level of the sound playback, a green one, and it does not go beyond 25% of the full bar.

  Everyone experienced, or got any advice on how I can get my speakers a little harder?

  Al

  Have you tried reinstalling the Audio driver?

  External speakers work ok?

  Have you installed the latest version of the BIOS?

  If you play a Midi file, is also very sweet?