Low performance with RAID10

Similar Questions

• Keyboard, audio and low performance with Satellite L50-A-19N index output

  Hello

  I recently bought this laptop and I am very disappointed on the keyboard.

  Construction seems pretty harsh, but typing typing particularly fast, I'm leaving A LOT of (double letters) or letters lack mistypes.

  It seems to me that imperfect contact of the bladder base key.
  I wanted to know if this is normal with this model or is to be retrieved.

  Second disappointment is on the quality of the sound, using IDT pilot the most recent laptop (6.10.6491.0) Web but barebone sounds incredibly ugly.

  I need to activate the audio component DTS which is turned OFF by default, only after the beep for the external speakers seem its listenable, but still not as good and audio of my previous laptop with Realtek HD Audio (about same class).

  Can anyone recommend a better sound improvement or how to reach generally of better sound quality?

  My third disappointment is on the performance of the processor, although he should have the processor i7 (4700MQ), the computer index in Passmark PeformanceTest reached only about 6600-6700 points, while different configurations with the same processor unit reach up to 7900-8000 points.

  I would like to know if that could be a defective unit of CPU in my laptop or is rather caused by other circumstances as more slowly other components.

  Hello

  Until we start to talk about all of your problems, you should post some information like: laptop model and perhaps that the system you are using

  Before that, the details are unknown, its actually not make no sense to talk of possible solution and the solutions.

• Qosmio X 870 stop without reason - low performance

  Hi all

  I recently purchased a Qosmio X 870 116 and I am extremely disappointed. It is supposed to be a gaming computer, but I can barely run that one game without the PC hangs. I tried to run newer games such as Diablo 3 and Guild Wars 2. During the download of the GW2 Launcher, the PC crashed after a while, closing without no reason.

  I finally managed to install the game on my laptop even when but I always have problems since I play after no more two minutes, the game slows down, the frame per second falls dramatically to 2 FPS and laptop computer crashes again.

  I think there is a problem with the graphics card or the fan because eveytime I try to launch a game, the fan starts to run very fast and noisely.

  I thought that it can also be a problem with technology Nvidia because of their service to Optimus on their recent graphics cards, so I tried to "give priority" use my NVIDIA GeForce GTX 670 M instead of the Intel HD family 4000 chipset used in the laptop computer, by right-clicking the icon of GW2 and opening the NVIDIA Control Panel to select the option "performance Nvidia High."

  Unfortunately, the game freezes still after a few minutes. I have of course updated the drivers for the Nvidia card, but even when it does not work.

  In addition, the laptop seems quite slow for me even while browsing on the Internet and the desktop which is rather worrying since the laptot has 12 GB of memory.

  Anyone have an idea what is the reason for these low performance?

  Thank you in advance.

  Hello

  There is a new BIOS v1.50
  Try to update the BIOS because I read in other threads that similar problem with X 770 has been resolved by the BIOS and update the graphics driver.

  The nVidia driver available on the page of the EU pilot seems to be older than the driver available on the nVidia page. If its interesting to know if you could get the running games using the driver from nVidia page.

• Why 4 GB of ram exhibits very low performance in vista 64-bit?

  IAM using windows vista 64 bit and I have installed 4 GB of ram I noticed very low performance and low score 4.5 I tired to change the positions of the ram and tried to use a different kind of ram, but my score of 4.5 with 2 GB or 4 GB ram sucked into this score with a low yield iam very disappointed of what can one help me?

  2 * 2 GB samsung pc2 6400 4 GB
  and I tried transcend pc2 5300

  HI BUD85

  Contrary to what said 'DaGreenOne' on 'thread lock', I can assure you that we will not do.
  We strive to help you with this problem.  However, I kind of sharing what he or she said several suggestions have been posted but nothing is your problem.  There was some good suggestions posted here.

  It's frustrating, I know.  Question: If you put the 'original' of return RAM in the system and restore the system back to how it was when you bought, 1st you get the experience index you originally?  This is assuming that you are ready to perform a system recovery which erases the hard drive clean and make it the way it was when manufacturing built the machine.

  Please confirm you "not" mix the different types of RAM in the computer, which means that you put in two sticks of 6400 and two sticks of 5300 (these numbers used for example)

  Thank you

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones very low performance after impossible to install the game (8310) necessary to reset the phone?

  Hello! Today, I tried to install a game using the Desktop Manager. I can see the icon in the menu, but does not (module not found) and the Desktop Manager does not see the game installed (or in options-advanced-applications)

  The problem is that now the phone has very low performance and I can barely use it, it's too slow.

  I think that the phone must be reset to the settings to factory or something.

  Can someone help me to do this?

  Thank you!

  Hello

  What I was doing to completely wipe my BB. I wrote this before and it printed.

  If your device does not work, perform a backup now if you have not already done save the file to a place and a name that you can easily locate it on computer.

  I then uninstalled DTM and then deleted all the other references to BB/Rim in Windows Explorer, thus eliminating the operating system for the BB to the computer in order to ensure that the version I want to reinstall a new version uploaded.

  Get the latest Desk Top software DTS)
  http://us.BlackBerry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&CP=OTC-DSKTPSW

  and install it on the computer.

  Get the latest version of the operating system

  http://us.BlackBerry.com/support/downloads/download_sites.jsp

  and save it on computer.

  To erase all data on your BlackBerry device, follow these steps.

  (1) download JL_Cmder http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html

  (2) install JL_Cmder to the computer.

  (3) double check you have already saved the BB. If you DO NOT, you will lose all data.

  (4) make sure that DTS is closed and plug in the BB to the computer via USB

  (5) to reach the JL_Cmder on your computer and double-click it to start. Now, it may take a few tries to connect, so persevering until he does.

  (6) on the first screen, press a key to continue.

  (7) now, if your device uses a password, enter it now. If not, press "N".

  8) press 4 to start CLEANING

  (9) press on 'Y' to continue

  (10) now type "blackberry" to continue

  (11) on the BB, you see a white screen with an error "507". Don't worry, that's what you want! You are now ready to install the operating system.

  Launch the new Desk Top software on the computer

  (1) on the homescreen of the BlackBerry® Desktop Software, click Device > update my device.

  (2) click on view the other Versions. Click the version of the new OS you previously downloaded.

  (3) click on install. The DTM will install the OS and then provide you with a list of applications to install. If you have had problems with an application, do not install it.

  Do not disconnect the device until the whole process is finished and restarted the device.

  After 10 minutes, restart again by removing the battery slot while tension and leave for a few minutes.

  Leave it again for 10 minutes. You should now have a fully functional BB!

• Extremely slow performance with Radeon HD 7870

  Hello

  I use a number of Adobe programs on my new 64 bit system of Windows 8, with 16 GB of ram, a processor Intel Core 2.67 ghz i5 and AMD Radeon HD 7870 2 gig. All programs (including After Effects and Illustrator) work very well with the exception of Photoshop CS6 64 bits, which is extremely slow performance with GPU to use enabled in my preferences (Photoshop selects by default). If I disable the graphic processor use, this slowdown faints. If I change the Basic Design Mode, there might be a slightly detectable improvement during Normal and advanced, but it is still horribly slow. The refresh rate seems to be only a few frames per second. Everything is slow: brushes, zoom, panoramic, as well.

  I tried changing the settings I've seen suggested elsewhere: I went 2 level of Cache, history says 10 and the size of the tile to 128 k. No effect. Photoshop is currently the default using 60 percent of available ram. Efficiency has remained 100% overall of all my tests. In addition, this slow performance touched me from the moment that I installed Photoshop; It didn't arise after previous good performance. The problem exists regardless of the size or the number of documents that I opened. Performance is always terrible, even when I create a new blank canvas of 500 x 500 pixels and try a simple task like drawing with a brush.

  Photoshop is perfectly up to date, and so are my graphic drivers (Catalyst version 13.1). Any help would be greatly appreciated; yet performance is so bad in Photoshop it is unusable, graphic acceleration activated. Thanks in advance for the answer.

  Information on the system of Photoshop:

  Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00) x 64

  Operating system: Windows 8 64-bit

  Version: 6.2

  System architecture: Intel CPU Family: 6, model: 14, Stepping: 5 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2 FP

  Physical processor count: 4

  Processor speed: 2665 MHz

  Built-in memory: 16379 MB

  Free memory: 13443 MB

  Memory available to Photoshop: 14697 MB

  Memory used by Photoshop: 60%

  Tile image size: 128K

  Image cache level: 2

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  OpenCL Version: 1.2 AMD - APP (1084.4)

  OpenGL, Version: 3.0

  Texture size video Rect: 16384

  OpenGL memory: 2048 MB

  The video card vendor: ATI Technologies Inc.

  Renderer video card: AMD Radeon HD 7800 Series

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1080, right = 1920

  Video card number: 2

  Graphics card: AMD Radeon HD 7800 Series

  Driver version:

  Driver date:

  Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

  Video mode: 1920 x 1080 x 4294967296 colors

  Legend of the video card: AMD Radeon HD 7800 Series

  Memory: 2048 MB

  Video card: 1

  Video card: driver Microsoft Basic Render

  Driver version: 9.12.0.0

  Driver date: 20121219000000.000000 - 000

  Video card driver:

  Video mode:

  Legend of the video card: rendering driver Microsoft Basic

  Video card memory: 0 MB

  Serial number: 90970078453021833509

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\RAFFAE~1\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  C:\, 931.5 G, 534,8 free G

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  ACE.dll ACE 2012/06/05-15: 16: 32 66,507768 66.507768

  adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

  AdobeLinguistic.dll Adobe linguistic Library 6.0.0

  AdobeOwl.dll Adobe Owl 2012/09/10-12: 31: 21 5.0.4 79.517869

  AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

  Adobe AdobePIP.dll 7.0.0.1686 product improvement program

  AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

  adobe_caps.dll Adobe CAPS 6,0,29,0

  AGM.dll AGA 2012/06/05-15: 16: 32 66,507768 66.507768

  ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

  aif_core.dll AIF 3.0 62.490293

  aif_ocl.dll AIF 3.0 62.490293

  aif_ogl.dll AIF 3.0 62.490293

  Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

  ARE.dll ARE 2012/06/05-15: 16:32 66,507768 66.507768

  Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

  AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

  Bib.dll BIB 2012/06/05-15: 16: 32 66,507768 66.507768

  BIBUtils.dll BIBUtils 2012/06/05-15: 16: 32 66,507768 66.507768

  boost_date_time.dll product DVA 6.0.0

  boost_signals.dll product DVA 6.0.0

  boost_system.dll product DVA 6.0.0

  boost_threads.dll product DVA 6.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.1.0.20577 2.1.0.20577

  CoolType.dll CoolType 2012/06/05-15: 16: 32 66,507768 66.507768

  data_flow.dll AIF 3.0 62.490293

  dvaaudiodevice.dll product DVA 6.0.0

  dvacore.dll product DVA 6.0.0

  dvamarshal.dll product DVA 6.0.0

  dvamediatypes.dll product DVA 6.0.0

  dvaplayer.dll product DVA 6.0.0

  dvatransport.dll product DVA 6.0.0

  dvaunittesting.dll product DVA 6.0.0

  Dynamiclink.dll product DVA 6.0.0

  ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

  FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

  filter_graph.dll AIF 3.0 62.490293

  hydra_filters.dll AIF 3.0 62.490293

  icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  image_compiler.dll AIF 3.0 62.490293

  image_flow.dll AIF 3.0 62.490293

  image_runtime.dll AIF 3.0 62.490293

  JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  LogSession.dll LogSession 2.1.2.1681

  mediacoreif.dll product DVA 6.0.0

  MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CS6 CS6 Photoshop.dll

  Adobe Photoshop CS6 CS6 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

  Adobe Photoshop CS6 CS6 PSArt.dll

  Adobe Photoshop CS6 CS6 PSViews.dll

  SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

  ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

  svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

  WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

  Required plugins:

  3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Accented edges 13.0

  Adaptive wide-angle 13.0

  Angular Strokes 13.0

  13.1.2 on average (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Bas-relief 13.0

  BMP 13.0

  Camera Raw 7.3

  Chalk and charcoal 13.0

  Charcoal 13.0

  Chrome 13.0

  Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 clouds (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  COLLADA 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Halftone color 13.0

  Color pencil 13.0

  CompuServe GIF 13.0

  Pencil tale 13.0

  Craquelure 13.0

  Crop and straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Crop and straighten Photos filter 13.0

  Hatch: 13.0

  Crystallize 13.0

  Cutting 13.0

  Features dark 13.0

  Deinterlacing 13.0

  DICOM 13.0

  Difference clouds 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Glow 13.0

  Move 13.0

  Dry brush 13.0

  Eazel acquire 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Embed watermark 4.0

  Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Extrude 13.0

  FastCore 13.1.2 routines (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Fiber 13.0

  Film Grain 13.0

  Gallery of filters 13.0

  Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Fresco 13.0

  Glass 13.0

  Scarlet contours 13.0

  Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Grain 13.0

  Graphic pen 13.0

  Halftone Pattern 13.0

  HDRMergeUI 13.0

  IFF Format 13.0

  Outlines in ink 13.0

  JPEG 2000 13.0

  Flattening coefficient 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Blur of the lens 13.0

  Correction of the lens 13.0

  Lens Flare 13.0

  Liquefy 13.0

  Operation of Matlab 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  maximum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mean 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Measure Core 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Median 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mezzotint 13.0

  Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mosaic tiles 13.0

  Multiprocessor support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Neon 13.0

  Paper notes 13.0

  13.1.2 color NTSC (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Ocean Ripple 13.0

  13.0 oil painting

  OpenEXR 13.0

  Paint Daubs 13.0

  13.0 palette knife

  Patchwork 13.0

  Paths to Illustrator 13.0

  PCX 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Photocopy 13.0

  13.1.2 Photoshop 3D engine (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Photo filter package 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Pinch 13.0

  Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Plaster 13.0

  Plastic wrap 13.0

  PNG 13.0

  Pointillism 13.0

  Polar coordinates 13.0

  Portable Bit map 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Poster edges 13.0

  Radial blur 13.0

  Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 range (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Read watermark 4.0

  Crosslinking 13.0

  Ripple 13.0

  Rough Pastels 13.0

  Save for the Web 13.0

  13.1.2 ScriptingSupport

  Shear 13.0

  13.1.2 asymmetry (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Smart Blur 13.0

  Smudge Stick 13.0

  Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Splash 13.0

  Spherize 13.0

  Sponge 13.0

  13.0 sprayed strokes

  Stained glass 13.0

  Stamp 13.0

  SD 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  STL 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Sumi-e 13.0

  13.1.2 summons (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Targa 13.0

  Texture veneer 13.0

  13.0 tiles

  Torn edges 13.0

  Watch twirl 13.0

  Draft of 13.0

  Vanishing point 13.0

  13.1.2 variance (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 variations (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Water paper 13.0

  Watercolor of 13.0

  Wave 13.0

  Wavefront | OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  WIA support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Wind 13.0

  Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Zig - zag 13.0

  Plug-ins option and third parties:

  DAZ Studio 3D bridge 12.0

  DazUpdateScene 12.0

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Kuler

  Install TWAIN devices: NONE

  The nomenclature "7800 series" seems good.  Here is what my system shows under Windows 7 with catalyst 12.8:

  ...

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  OpenCL Version: 1.2 AMD - APP (938.2)

  OpenGL, Version: 3.0

  Texture size video Rect: 16384

  OpenGL memory: 2048 MB

  The video card vendor: ATI Technologies Inc.

  Renderer video card: AMD Radeon HD series 7800

  Display: 2

  Limits of the display: top = 0, left = 1600, low = 1200, right = 3200

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1200, right = 1600

  Video card number: 2

  Video card: Radmin V3 driver mirror

  Driver version: 3.1.0.0

  Driver date: 20070808000000.000000 - 000

  Video card driver:

  Video mode: 1600 x 1200 x 4294967296 colors

  Legend of the video card: Radmin V3 driver mirror

  Video card memory: 0 MB

  Video card: 1

  Graphics card: AMD Radeon HD 7800 Series

  Driver version: 8.982.0.0

  Driver date: 20120727000000.000000 - 000

  Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

  Video mode: 1600 x 1200 x 4294967296 colors

  Legend of the video card: AMD Radeon HD 7800 Series

  Memory: 2048 MB

  ...

  I use Catalyst 12.8 pilots at the moment and have a Windows 7 system and have a remote access utility called Radmin installed, but I don't know if seeing that Microsoft based Render driver is provided on Windows 8.  It seems that this could be the key, as the basic OpenGL implementation of Microsoft is made all in software.  If somehow driver Microsoft took control and you don't get really the GPU acceleration, then that would surely make things really slow.

  Rafaello, you have updated drivers...  You can post your top of your system information again?

  Have you tried a full, complete deletion ATI driver and reinstall from for example, 13.2 beta?  Here is the removal of ATI tool:

  http://sites.AMD.com/us/game/downloads/pages/catalyst-uninstall-utility.aspx

  -Christmas

• I do not, ive turned up of each vol. control that I can find. Volume is still real low, evan with ear phones.

  1. I do not, ive turned up of each vol. control that I can find. Volume is still real low, evan with ear phones

  Hi DorthyClark,

  1. who is the operating system installed on the computer?

  2 have you made changes to your computer recently?

  3. do you get any error message related to the sound?

  I suggest you follow the methods and check if it helps.

  Method 1: Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2: Download and install the latest audio drivers from the manufacturer.

• Improve performance with an external SSD thuderbolt

  Hi all.

  I have a performance problem with my Photoshop and I'd like to get some kind of help. Currently I have a 27 "iMac i7 3, 5 GHz, 16 GB of Ram and 3 TB HD... However, working with large files photoshop performance is not really good. I have tried many things and recommendations already, but the performance is always the same.

  However, I read on the Internet that obtaining external lightning THAT SSD could not understand the problem (the option to purchase an internal SSD is completely ignored.). The idea is to buy one of this external thundebold SSD (about 300) and import the images that I work with in this disc. When I finished my editing process I could move all files to my internal drive to 3 TB of storage overhead in order to have here all the files (PSD, RAW and JPG). If I need to edit again a TIF I could bring it back to the SSD, work there, finish the process and move again to the 3 to HD.

  What do you think of this idea?

  Thanks in advance for your help and sorry for my English level if a lot of mistakes were made.

  Assign multiple disks scratch from the same real disk will have a detrimental effect on performance. For an SSD, it is neutral. Basically, very large volumes of data must be moved to and from the "scratch disks". You get better performance with

  * more fast disks

  separate disks

  So, don't assume don't you stop using the internal disk for scratch! All of the two disks is better than one, probably.

  No, it makes no difference where Photoshop is installed either. Dwelling on an issue key, setting workspace. I gave a very simple view, others may have different views. But the bottom line is that adding a new drive is not going to help unless it is used for this purpose.

  "Do you think I have my problem to my internal HDD fault? I think that Yes... »

  Well, we do not know. For example, you can monitor disk and CPU to see who is at its maximum? If you do not know, you could be throwing money on the problem of evil. But certainly, those who want high performance buy discs specifically to use as scratch - many of them.

• I bought a Photoshop elements 13 DVD for my MAC, but it is not a bit of port DVD I have low load with serial number?

  I bought a DVD of 13 Photoshop elements for my MAC, but it is not a bit of port DVD I have low load with serial number?

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• ISCSI performance with HP DL160 G6 and ESX 4.0

  I feel iSCSI performance with HP DL160 G6 and ESX 4.0 servers and would like to help with this.

  I have Setup iSCSI on 3 * ESX 4.0 host.

  Each have a corresponding single target and a single LUN on the SAN. The LUNS are formatted as fmfs3 types.

  Each host is connected to the QNAP San in the same way via a Gigabit switch.

  All NICs operate at 1 GB.

  To test the performance I use vmkfstools to clone a drive from the local store to the LUN

  On the first host (a DL140 G3) performance is good to 48 MB/s.

  On the 2 DL160 performance is very poor and barely reach 2 Mbps

  During cloning, DL160 servers save also on several occasions by the following in/var/log/wmkwarning:
  Vmkernel servername: 0:05:23:53.214 cpu2:4308) WARNING: NMP: nmp_DeviceRetryCommand: device 'naa.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx': waiting for updated status of fast path for blocked with e/s failover. No prior reservation is on the device.
  Vmkernel servername: 0:05:23:54.195 cpu3:4210) WARNING: NMP: nmp_DeviceAttemptFailover: try tipping unit "naa.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" world - order 0x4100051a20c0

  I made sure the servers are up-to-date:
  DL160 G6 Configuration:
  ESX 4.0.0 build-702116
  2 * NIC HP NC362i GB (firmware 1.7.2, driver 1.3.19.12.1)
  1 * smart Array P212 controller (firmware 5.14)

  The SAN server configuration:
  QNAP Ts-459u-rp (firmware Build 0302 T 3.6.1)

  I looked everywhere for an answer.
  I also tried the "esxcfg-advcfg - s 1/VMFS3/FailVolumeOpenIfAPD" as suggested on some positions.
  All to nothing does not.

  Any help / advice would be appreciated!

  is this software iscsi or nobody to support iscsi?

  Because all messages from vmhba0... Usually the software iscsi Setup with vmhba33 or vmhba36...

  Can you check vmhba0 keeps the volume...

• Identification of sources, causing low performance

  Greetings,

  I have two ESXi and vCenter, two iSCSI SAN, local storage is not used. All the disk activity is based on ethernet LAN.

  A few hours ago some VM has experienced very low performance.

  When I checked the graphics of first ESXi server performance he showed very high values (see attached).

  but when I checked for each individual VM performance charts, even affected VM, everything within a reasonable range.

  I have not taken any action, and suddenly everything go back to normal...

  How can I identify what is the cause?

  Hello

  Your screenshot of the performance logs have the information below in blue but unfortunately it was cut. So the next time you have the problem have look lower down for writing and or read rates which shows that intensive use and I would recommend ESXTOP using next time to give you a good amount of data on the problems that you may encounter.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• HP BL460c slow performance with Mez Qlogic FC.

  I am under 16 blades ESXi with Qlogic FC mezzanine cards.  Performance have been greate to the Build number:

  153840 on March 20, 2009.   After the upgrade to the Build number: 153875, qlogic module took more than 30 minutes to load and later all the modules load very, very slowly.  I tried every generation since March 20, and they all lead to very slow startup time and slow CF performance with lots of timeouts.

  Today, took me to update to the latest version of the HP BIOS for server, network cards, Qlogic and the ILO.  And I had no luck.  Does anyone have any suggestions?

  Thank you

  you use virtual connect and if so what version do you use?

• Characters not visible (caused by hitting the bar space or TAB in PL/SQL developer tool) causing slow running query? and database with low performance?

  Hi all

  I need your help to get this issue resolved its urgent and I'm not able to get to the conclusion. Here is my scenario, I'm getting slow query runs because of some non-visible characters that are copied with the application of the PL/SQL developer tool. Please find below attached screenshot: Oracle_Issue

  

  Note: This non-visible characters are caused when we write the query then us hit the SPACEBAR or press TAB PL/SQL developer tool

  I use the developer tool PL/SQL to write or test the query. Now I take this request copy paste in my application of the company (who takes this query connects to Oracle or any source of data base, catch data and produce PDF reports for customers).

  Now, my client is the Oracle user when I write and you run this query by the PL/SQL Developer, it works fine, but when I paste in my Inbox feature request (reporting system) and run it, it runs slower and jams to the customer database. Now after a little research I found that when I copy the query directly from PL/SQL developer at my request, he copy some characters not visible (introduced when we press SPACE or TAB in PL/SQL developer tool when writing query) with the request, then I copy this query again to my box of the application Notepad and delete these non-visible characters. Now, after removing the non-visible characters again once I copy backup question in my application and run the query, it works normally. Please find below attached screenshot: Oracle_Issue 2

  

  So I think that the cause of slow performance is due to some INVISIBLE CHARACTERS present in the query.

  My application uses SQL server 2008-2012 at the backend to store data from different sources.

  Character set used: SQL_Latin1_General_CP1_CI_AS

  
  

  To write and test queries: PL/SQL developer tool

  My Client use Oracle 11 g

  Character set used: Normal character: NLS_CHARACTER: AL16UTF16

  National Characeter: NLS_NCHAR_CHARACTER: WE8WIN1521

  I just wanted to know the blocking process to the top of the database and the characters not visible how affecting slow running query of query database.

  Please let me know if I'm missing something or you need more information on this issue.

  Thanks in advance,

  HP

  Simple answer. No.

  Spaces and line breaks do not change the execution plan created. Does not plan to run slower or faster.

• Too low current performance with USB-6501

  For my measure I connected to an output port (output high voltage, 28 pins) with resistor of 10kOhm to ground (Pin 32). For the active reader to type out in car, I measured a 3.33V voltage and current of 0.33mA. I repeated the same measure with open-drain configuration, which leads to 3.27V and 0.33mA. I use NI-DAQmx and changed the disc type of output with a property node in labview 8.5.1. High-voltage output was generated with labview. In a second step, I put out high voltage with the able Control Panel & automation of DAQmx which led to the same result.

  For my measure I'd wait a current higher return especially for active training mode, since the specification indicates a voltage between 2.8 and 3.6V for 2mA. I don't understand why the output current is not 0.5mA which would lead to 5V.

  If I do the same measure with the + 5V output (PIN 31) source instead of the output port (pin 28), the current is as expected 0.5mA and 4.8V power can be measured.

  For all measurements, I used a NI USB-6501 which has already been tested by an engineer from the Canadian standard.

  Hello James Mc.

  Thanks much for the reply. To reach the CMOS specifications (between 3.5 and 5 v) I add an external pull-up resistance and use to open-drain output ports.

  Kind regards

  Priska Studer

• A specific account of MSAD with very low performance

  We have a specific account of MSAD EPM that takes forever to connect and access a form of planning to run a report.  If the same user uses our native directory IDs test meeting he is as fast as all other MSAD accounts.

  If another account MSAD uses his work station that they may have no problem (so not a problem of workstation)

  We dropped and he added to security groups, updated filters and reviewed its MSAD configuration to ensure that it is no different.

  Looking for other avenues or the tools to use to determine why this person has problems.

  JTS

  Had to share this desire

  Finally figured out what was the problem after sniffing through our network.  It's a preference of the workspace for the Accessibility Mode.  It has been verified for this user (File/Preferences/general/accessibility Mode)

  The speed of the system unchecked once was normal for other users

  Always small things

  JTS