Low speed according to Bredbandskollen (2, 47 MB) instead of 13, 14 Mb

Similar Questions

• Satellite P100 GPU fan turns costantly at low speed?

  Finally something strange happened on my laptop and I wonder if even happened to other users of P100 series laptop. All of the sudden GPU fan began to operate at low speed all the time. Before he reached 60 ° C and then had shrapnel short until it cooled down to 50 ° C and the order. But now it runs at very low speeds and temperatures are around 48 C. It is not noticeable and I'm very happy with what (it should be like that from the start).

  Now I wonder what could have triggered that. Do you have bios that has changed (I have the latest 2.40). At the beginning when I changed the computer bios worked as before, but then at some point I changed muffler in performance mode and since that day, the GPU fan runs constantly. I tried to change it to silent mode, but the GPU fan runs all the time. My laptop is P100-115 (Geforce 7600)

  Hello

  Looks like you re a happy with the use of the fan.
  I think that the new BIOS has been changed and that's why he has better influence on the performance of cooling module and so it works at very low speed. I think it is much better than the rotation of the fan restless.

  As you have already mentioned the Toshiba power saver controls the speed of the CPU and cooling method. If these settings could affect the cooling of laptop.
  But believe me; It of much better to have the constant low temperature and fans completely.

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• Satellite A100 - 192 Windows Vista USB low speed

  Hello

  I installed vista on A100-192, I configured everything correctly, all the drivers installed, but the USB transfer speed is totally low and when hollow transfring usb I have sound and video form. / CPU usage is 100 percent when data transfer from my camera or compact flash. Same thing with the PCMCIA card.
  On windows xp, it worked great!
  I guess it's something about drivers, because when I connect my hard drive usb hollow it works very well/windows sees it as a hard drive, but when I connect something else, and windows sees it as a removable drive - about low speed starts :/

  Any idea on how to solve this problem?

  Best regards
  Krystian

  Hello

  do you have what drivers installed? That you have downloaded the drivers, have you downloaded the correct drivers? Sorry for my question, but I'm sometimes on certain things and then I can't explain the errors that are produced.

  Welcome them

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.

• Speed dial is replaced by another program instead of opening in a new tab program. How to solve?

  I've been using Speed Dial for a long time and when I click on a button, usually a new page opens, leaving the available speed dial. Recently, whenever I click on a speed dial button, the new page opens instead of Speed Dial. I want new Speed Dial, I should back up page by page or restart Firefox. This occurred only recently and it is very annoying. Any help will be appreciated. Thank you.

  Finally also remember that instead of clicking the icon of speed dial, I can do a right click on it and click on 'new tab '. This way it will return in a new window. This isn't the way it has always worked. I wonder why the change?

  Thank you. I right click on the box and he gave me the opportunity to open the site in a new tab. Nothing on the opening always inn a new tab. Hope that I will always remember right click goes forward. Thanks for your help.

• DV6 6c65se: hp pavilion dv6 6c65se RAM update more low-speed clock frequency

  Hi I dedided to chenage my original RAM memory to a

  Corsair CMSX8GX3M2A1600C9 NB Vengeance 8 GB (2x4gb) 1600 MHz CL9 DDR3 SO-DIMM two memory Module Kit Performance

  When I changed to RAMto a new and restart a system, I was surprised the classification System went down from 7.6 to 7.4 could someone explain to me why this happened if the old RAM was unbraned in trouble from China? Why my new performance as Corsair is defined by the hardware to work on the low clock speed, also is there nothing in the BIOS to change the clock speed of RAm etc.

  Could someone help me in this regard?

  Thank you

  Hello:

  I can't tell you why the performance of WEI memory went down, but he certainly wouldn't.

  The faster the memory will run in your computer laptop is 1333 MHz, because it is the fastest speed of the processor i7-2670QM FSB can run to, so installation PC3-12800 (1600) memory provides no advantage.

  The original memory regardless who did, should have been 1333 MHz.

  You need a PC with an Intel 7 series chipset and the 3rd generation of processor core to memory to operate at its rated 1600 MHz.

• ENVY of HP dv7 Notebook PC: how to resolve low speeds of transfer USB 3 of 20-23 MB/s

  Hello

  Ive done a clean install of win 10 on my HP Envydv7 7332ea and now the rate of transfer on a USB 3, use the right cable to a seagate backup disc is sitting at 20-23 MB/s

  Ive said that the latest drivers are there for the seagate drive

  Ive changed the policy for better performance in Device Manager

  The BIOS is locked.

  Does anyone have any ideas on how I can come back good USB 3 speed?

  Concerning

  K

  Hello

  How fast do you expect? According to the files on your source and target structure. 20-23 MB/s is a good sspeed. If you have hundreds of small files, the speed will drop more. What software do you use for backup? If only purely copy, please try a product called TeraCopy, this will start the speed up to 10% to 20%

  Kind regards.

• Low-speed Internet with wired connection to E4200

  I have a HP Pavilion p6347c AMD Athlon II X 4 630 2.80 GHz, 64 Bit, Windows 7 SP1 WITH 16 GB of Ram, using Comcast high speed Internet.

  It works very well and I had no problem with my Pavilion until I replaced my old router G with a LinkSys E4200 (state-of-the-art, the top page of the router line N).  All the features work well, except that when I use Firefox 7.0 or Internet Explorer 9.0, the connection time is very very very slow when my computer is connected to my router with an Ethernet cable.  The problem disappears when I log - in using the same Ethernet cable - directly into the modem high speed; Then, the loading speeds are fast as lightning.  When I return to the router via a wired connection, even - page very very very slow post.

  I've already spent about 8 sessions with LinkSys on the phone and chat, and it turns out that the router is not the problem (according to LinkSys).  They advised that I need to contact the manufacturer of the computer, or people who can respond to Windows 7 support issues.  Someone at - it ideas?  Maybe something I can change in the settings of the firewall, network, computer security options settings?

  I connected my HP laptop running WINDOWS VISTA on the same Ethernet cable and disabled the wireless.  The speed of the wired connection is quick as a Flash - no problem at all.

  Then why my desktop Windows 7 SP1 computer not offer me the same speed?  Whenever I need to do important online work, I have to unplug my Ethernet cable from the router and plug directly on the modem to get faster speeds.  I then reconnect to the router once completed, so that users without wire and devices on my network work.  It's very frustrating.

  Help!  I am at a loss to understand why this computer has not faster to the Internet when wired to the router.  Is - this Windows 7?  There are some options that I need to change?  Someone at - he heard talk about this and you offer solutions?  Appreciate any assistance.  Thank you.  / Jacques novel /- [email protected]

  P.S. Customer LinkSys was no contribution to this issue.  I hope that some tech "warned" this reading will say AH-HAH and offer a viable solution.

  On a hunch, I selected the reset 'Factory Defaults' option in the Administration, after having updated the firmware. Something must have been damaged during the first attempt to install the router.

   

  To reset the default settings, you must have the original Setup disk and re-install using the same router name and the password.
  

   

  When this was done, the Ethernet connection worked perfectly.  Hope it will be useful to all having the same problem.
  

• E1200 low speed wired & wireless through L2TP

  I have the L2TP connection. Without the router, just cable, I have 35 MB/s download and 70 Mbit/s upload.

  Through the E1200 wired & wireless, I get a huge download speed 5-14 Mbps.

  I have the latest firmware and I reset it after the update.

  I read a lot of information about it and a lot of people write that this router just can't handle the gear through L2TP.

  Is this true? It could be fixed?

  If you get only 5-14Mbps download speed via the router, which is so far beyond the rate without it, I must say that the router has problems. You can try to lower the MTU settings to 1460, and then do the test using speedtest.net.If that does not solve the problem, I suggest getting a new router, preferably a one gigabit.

• Low speed SSD on Lenovo T61

  I bought new SSDS OCZ Vertex2 120 GB for my laptop, but the speed of R/Wr is low - max 140 MB/s (support SSD up to 260 MB/s) & problems with the FirmWare update are performed.

  It is a Chipset problem?

  This is a BIOS problem.

  old BIOS:

  

  new hacked BIOS

  

  did you update the bios SATAII? in the contrary case, the laptop is limited to SATAI speed, that's why you see only the limit of 140 MB/s.

  If you did not upgrade, then you should try bios update of Middleton.

  http://Forum.NotebookReview.com/Lenovo-IBM/459591-T61-x61-SATA-II-1-5-GB-s-Cap-willing-pay-solution...

• [WRE54G v3 - EU] Strong signal but very low speed

  Hello

  I just managed to get my new WRE to work after digging around several useful threads. My laptop connected successfully through the WRE and I got the signal strength excellent (54 Mbit/s as the status of dialogue shown). However, when I tried to browse multiple web pages, they took a long time to load. I ran a test of speed at speedtest.net and I'm barely 100 KB/S download speed (sometimes, it falls as low as 50 KB/S). Before when I connect my laptop in my room through the living room's wireless router, the signal was weak but the download speed was decent.

  Is that what I can do to help increase the download speed? Any idea/useful experience will be greatly appreciated! My router is not Linksys but custom-made by my ISP to support DSL, phone and TV at the same time.

  Thank you!

  What is the Distance between your router - WRE54G and computer. Make sure the Distance between your router and not more then 40 WRE54G fts 40 fts and the distance between your WRE54G and not your computer. Once you have done this right connections, after that, you can check the speed of your computer.

• WFI low speed WLC2504, AP2602i

  Hello

  I have a problem with a wireless speed. The materials I use are wlc 2504, ap 2602i, 1602i. Problem is with customers who are only associated with the ap 2602i, often the speed is very low 10-50 MB/s (from properties windows wireless). When it works normally speed is 144 MB/s.

  I'm quite novice in the wireless, please explain to me how to troubleshoot and increase speed.

  Thanks in advance.

  Below, thread, it should help you on this

  https://supportforums.Cisco.com/discussion/12710671/not-able-achieve-80211n-bandwidth

  HTH

  Rasika

  Pls note all useful responses *.

• Expereancing low speed internet after installing windows 7

  I have dell inspiron 1545, core 2 duo inetel. At the time of the new TI was windows vista home basic sp1 32-bit. recently I have installled windows 7 vista is very slow, now I am expereancing very very low internet speed compairing to the previous version of windows vista... Please help me... I have Auntie docomo photon max, which has very good speed of 6.2 MB/s. I think that it doesn't have a speed of at least 1.5 Mbps... Please help me get good internet speed

  Please answer my question

  Ben SAI

  Is it wireless or wired?

  Make sure that you have installed the latest drivers supported W7 network interface for your material, obtained from manufacturer site PCs.

  You can test your speed here typical - http://www.speedtest.net/

  See if this helps or give clues - http://windows.microsoft.com/en-gb/windows/why-internet-connection-slow#why-internet-connection-slow=windows-7

• ProBook 430 G3: Pleasure of the laptop cooling accelerates the low speeds constantly

  Hello

  I have a brand new HP Probook G3 of 430 who works and do everything just great, the only problem is his strange cooling fan noise.

  The problem is that it accelerates and accelerates downwards constantly without visible reason. (Please note that this is not normal behavior when coolers change from higher temperature of the processor speed). The interval between the top speed down is less than a second and it is constant. So imagine when cooler works on higher speed, it is not smooth, as it is supposed to be, but little wave / floating.

  I'm not sure with speeds laptos fans run, but if view the problem it will look something like shown below

  

  Action taken:

  • Updated the BIOS to the latest version - did not help.
  • Start the 'Fan always on AC Power while' - sounds even.

  Can anyone suggest anything to diagnose the problem of fan? Mayble there's some fan diagnostincs tools or anything else that can help.

  Thanks in advance for your suggestions.

  I will say that it is a hardware problem with the fan itself. You could try and blow with compressed air. There may be a clog of dust or something that is causing do drag, dislodge, then reclogging. Or the fan may be faulty.

  I would like to make a warranty case or if you can return it for a replacement that would be a good idea, too. The Probooks are fairly easy to work, and it's possible hP might just send you a new fan but I doubt little.