Lower panel of blackBerry Smartphones

I fear I know the answer to this question, but is it a miracle (or anyone had this before) the lights under the buttons in the lower right panel (the 'Back' and 'End Call/Power Off' buttons) does not?  Sub low left lights work again, but just barely.

System of fear perhaps to be sent in, but want to check before any act performed.

Thank you!

Sorry, no fix is available, maybe a LED is burnt or covered with something

If under warranty, call the place of purchase

Tags: BlackBerry Smartphones

Similar Questions

  • Adjustment of Panel of blackBerry Smartphones

    Is there a way to make panels drop to the bottom of the screen and shows all icons.

    Touch & slide the tip down to hide the icons.

    Ron

  • Extremely low battery for blackBerry Smartphones

    the new bb torch 2 battery life isn't making me happy. I did pay the phone for the day enitre now, and the only thing that is opened or used is the bbm service... I charged all night, I used the bbm service once this morning and the battery is half his life now... what should I do to make sure that the battery life lasts longer?

    Try a battery pull if you please, with the BlackBerry device powered on, remove the battery 15 seconds and then reinsert the battery to reboot the device. This will clear all hide as restarting a PC. Then try again and see if the problem persists.

    On device, go to Options, device, application management is a great way to see what your applications with your use of the CPU on #Torch. Simply drag bar greater than CPU and see what happens. Also touch the CPU menu to see other time variables. I discovered that an application has been eroding CPU cycles on my own

  • BlackBerry smartphones, what happened to my memory? HEEEELLLLLLPPPP!

    Last night I updated my 8120 with the latest software available for me, that was the v45.0.124.  Before that, when I go my camera it said that I had about 40 or more photos.  Now, after update, I have 0 pictures on the left.  I checked my bytes and he said: I had over 9 million, and when I plugged my phone in the Desktop Manager, it said I had left 21Mo.  My question is why can't I save images or ringtones now?

    Hello

    This explains the photos.

    I strongly suggest that you get a media card.

    megabyte 10,2721 is what you had before the reset,

    megabyte 11,7538 what you were after.

    64 megabytes is what your phone is total.

    15 MB would be considered as minimum for your phone working properly.

    I suggest the following items and keep your approximately 20 MB of memory

    Just a tip, most people close the applications by pressing the ESC key or red. This does not close the applications.

    Each application has an option to close or exit. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom close is listed. You can see what is running by using the switch application option in the main menu.

    Thank you

    Bifocals

    How would you describe the situations of memory low on the BlackBerry smartphone

    How to maximize space and power battery life on the BlackBerry smartphone

    Call logs, SMS text and email messages are deleted on the BlackBerry smartphone

  • Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

    I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

    Thank you!

    Then you can try upgrading the BBM to the latest version available for your device?

    Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

    KB10040 : How to view or delete the application installed on a blackberry smartphone 

    Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

    Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

    _______________________________________________

    Please note :

    If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

    KB20554 : How to back up and restore the BlackBerry Messenger contacts list

  • Low memory app-9300 blackBerry smartphones

    After you have installed around 5 apps, low memory is displayed which shows that I have 0% left but I left about 25 MB.

    pls help!

    Hi bbuser1990,

    Check the KB articles below to know more about low memory-

    • KB02843 What is the function of low memory manager on the BlackBerry smartphone
    • KB14320 How to maximize the battery life and available memory on the BlackBerry smartphone

  • Error jvm 102 on Blackbery Bold blackBerry Smartphones

    White screen with JVM 102 error. How can I fix it without losing any data

    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECPs = com.dataviz.dxtg.stg.excel.xls.
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECCs = Excel97Model
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VECMm=()
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPEs Module = ' SheetToGo47-4' ran out of memory while checking (603)»
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPKv = 1
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM:VCPNs = SheetToGo47-4
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : VM: + BORK
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : JVM error 102
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : invalid code in filesystem
    time GUID:0x97C9F5F641D25E5F: 02:00 Thu Jan 01 1970 severity: 0 type: 2 appystem data : JVM:INFOp = 2280a8b3, a = '5.0.0.586', o = '5.1.0.146', h = 4001507

    Hello Drgnh

    Welcome to http://supportforums.blackberry.com/

    The JVM 102 error occurs when one or more files COD, either from an application or the operating system itself, are damaged as a result an immediate stop of all processes in the BlackBerry Smartphone is generated, preventing the loading of the operating system boot sequence.

    The BlackBerry software should update the phone.

    Search and download your OS and everything above applies

    By sdgardne 

     

    However, here's what I propose...

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry Smartphones BB Messenger disappeared

    I tried the update Blackberyy Messenger by downloading and installing a later version on being invited by the Blackberry World. Later, I realized that BB Messenger is gone off my phone, but App World it says it is installed. I tried to remove and reinstall and it won't allow me. Help, please.

    Hi TroymanMartin

    Welcome to the Forums of the BlackBerry Support

    First try a battery pull restarts, if it is still impossible to locate and remember it's not hidden, to check that the screen is in the Panel Home screen ALL > press the Menu key and select "Show all icons" or icon to display "." It will show all of the icons that were previously hidden. If you see BlackBerry Messenger icon like grayed then highlight it and press the Menu key and select the icon to display, also search your folders as the Application of Instant Messaging folder, etc..

    If it is still impossible, then try reinstalling the BBM, but first on your homescreen go to Options > device > application management > locate and delete BlackBerry Messenger from this list.

    KB10040  : How to display or remove installed application on a blackberry smartphone   

     

    Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

    Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload for download the latest available for your device.

  • Help of blackBerry Smartphones that apps on my Blackberry Curve 9360 were gone after complete wiping!

    I'm wiping yesterday and when I checked on my "device" option, the "battery" option was missing, where I can choose the level of my light screen. Another thing, it is that my 'analysis of the BB device' were like a stethoscope icon, but after you wipe, the icon changed into a black rectangle with a question in the middle of the matk. Whence this 'battery' device option missing? How do I get him back? If it cannot, how should I do if I want to put my light svcreen level? And I can delete this now rare device monitor 'BB' since I can't find the button Delete like other apps? HELPPPPPP! Thanks a lot for the answers!

    Hello!

    Based on your description, I would recommend a full reload of the operating system. The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    Note that all the apps add-on indeed went from the device... a WIPE is very obedient and removes the add-on apps. Reference:

    • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

    Good luck and let us know!

  • BlackBerry Smartphones BB 9000 os 5.0 update

    Hello Sir/Madam

    Please help me for my BB Bold 9000 Os update

    I install BB 7 Desktop Manager and I used to update the operating system of v.5... 0 for the mobile, but then that update it shows the error and it gives an error at "CONNECTING TO jVM" and it shows the error to "APPLICATION LOADER WAS UNABLE TO CONNECT WITH YOUR DEVICE. "PLEASE RE-CONNECT YOUR DEVICE, ENTER THE PASSWORD IF NECESSARY AND CLICK RETRY.

    Hello and welcome to the community!

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry smartphones can not update AppWorld 907 invalid COD

    Hi guys. I bought my Torch 9800 (v6.0.0.570) in 2011 and so far the problem is still not resolved. Everytime I open the AppWorld

    -A message appears: "To continue to use Blackberry App World, you must upgrade your current version."

    - Then I download the update.

    Whenever the 99% achieved download bar, suddenly a message appears "907 invalid COD".

    I can't even delete my BB AppWorld. There is no option "Delete" in "Application Management" or "Modules".

    Hi Firdaus92

    In this case, it is advisable to upgrade the version of your operating system to the v6.0.0.756

    Search and download your OS and everything above applies

    By sdgardne 

     

    However, here's what I propose...

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • 9320 blackBerry smartphones needs help!

    Hi all!
    I bought my first Blackberry Curve 9320 in May and I downloaded the latest software on July (version 7.1 2093), and I can't find any other version.

    Now, when I try to connect my mobile on the market, he said to I need to download the latest version (even if I do it with my PC or WI - FI connection), and if I go to www.blackberry.com/appworld/support to download, it tells the of there an error (503, if I remember).

    I also tried to download sent to my email address, but it does not in any case!
    So the problem is that I can not connect my Blackberry to its low of PC market or even use from my mobile.

    Can someone help me?

    Hello and welcome to the community!

    Please try this sequence:

    (1) to remove from your BB AppWorld

    • KB10040 How to view or delete applications on a BlackBerry smartphone
    • He asks to restart the BB,

    (2) a Batt Pull reboot (power on, remove the battery, wait, insert the battery, wait), even if redundant to the one you did in step 1.

    3) install a new copy of AppWorld (on your BB)

    (4) restart another Batt-sweater

    (5) see if it works now.

    See you soon!

  • Phone of blackBerry Smartphones is possesed?

    Hi... my blackberry 9900 randomly opens messages and apps and call someone from my contact list, the screen keeps jumping and open anything... help please!

    OK thanks... you did a Wipe of security on the device, not a factory reset. Ok.

    In view of all your symptoms and issues, I would recommend a reload of the OS. The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below. It is perhaps questionable in your situation... you may or may not now be able to make a backup. I hope that you have a recent, that you can use.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • Sellers of understanding of blackBerry on blackberry Smartphones

    Hey

    My boss gave me his old blackberry. He used proximus (Belgium). I don't think that the phone is locked (how I see this?).

    He also had a problem with in the past, this has been fixed but suddenly no more Dutch language.

    I searched this forum and found a software link (Desktop & Device Software Download Sites for BlackBerry users):

    If you have not purchased your BlackBerry® smartphone directly from Research In Motion (RIM), please select the link to your service provider below to download the BlackBerry® Desktop Software and BlackBerry® Device Software that your service provider has authorized for use with your device.

    If I understand correctly: Let's say if I'm going to buy a new company BASIC SIM card (a provider of services in Belgium), I need to install the software for this service provider.

    Does this mean that if I am abroad (outside), I can't use the phone more?

    I need blackberry device software to reinstall the blackberry, so the Dutch language is back.

    Is there a difference between these software (sorted by country) or what's available that's different languages?

    Hello and welcome to the community!

    You have several misunderstandings... then this post will be a bit long... Sorry about that...

    haramo wrote:

    My boss gave me his old blackberry. He used proximus (Belgium). I don't think that the phone is locked (how I see this?).

    Reference:

    haramo wrote:

    If I understand correctly: Let's say if I'm going to buy a new company BASIC SIM card (a provider of services in Belgium), I need to install the software for this service provider.

    # With the appropriate tips (below), you can use any bundle of BONES of any carrier, as long as it's your specific model BB number.

    haramo wrote:

    Does this mean that if I am abroad (outside), I can't use the phone more?

    Completely independent.

    To use your BB when out of your network home, and if you want to keep your home SIM card inserted, you must have stored with your carrier network for roaming, international data plan if that's where you are roaming to.

    To use your BB on a network of different carrier with their SIM card, you must first have unlocked your BB is carrier home (see above for that).

    Other (applies to both), your BB must be compatible with the carrier data network technology and frequency... If the radio inside your BB does not support the network of the carrier, then nothing will work. If it is compatible, then you should be able to receive voice-level services. But for data level BB services, must still ensure that your specific model BB number is supported by this network of carrier for AutoShip of HRT and maintenance to your BB book... If not, then you will not be able to receive data of BB services.

    haramo wrote:

    Is there a difference between these software (sorted by country) or what's available that's different languages?

    It's actually more and less complicated than that. Looking at all the 4 bytes of the version number of the operating system, if the two carriers have the same version, then the package is the same from the functional point of view BB. However, each company tends to "Pack" the package they release with some specific things from carrier, but none of this is really necessary... it's usually just things like icons of teaser for applications that a carrier has agreed to try to push their users. Not important.

    Regarding the language, it is not simply a matter of the carrier you choose. It is rather a question of the OS package you choose, such as governed by this KB:

    • Article ID: KB05305 Location of support for BlackBerry smartphones

    haramo wrote:

    I need blackberry device software to reinstall the blackberry, so the Dutch language is back.

    OK, with all the foregoing of the road now, the easiest way is, on a PC (you can not do this on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.
    • Use the location KB link above as your guide to choose a package that contains the language you want.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue. When installing, be sure to check deeply to all available applications to choose to settle... don't forget to dig deep into each element of multi-level and don't forget that you have selected everything that relates to your language (s) you want.

    Good luck and let us know!

  • Update to blackBerry Smartphones

    I'm going to bundle torch 9810 7.1 2108 (v7.1.0.746, platform 5.1.0.546)

    There is no option in my phone to update the software on the phone itself

    can u suggest how to get that?

    also I don't know what NFC and how to use it in my phone

    and it doesnot contain also an fm radio... as indicated by the site to version 7.1

    and also mas bb do not work on my device

    Hi rhythm_mittal

    Here, it is recommended that you upgrade your blackberry operating system 9810

    The latest version is 7.1.0.912

    And here is a method to update the information.
    Knowing that the application is no longer compatible with OS 7.1 or then Waze BlackBerry Maps give you problems with version 7.0.

    Search and download your OS and everything above applies

    By sdgardne 

     

    However, here's what I propose...

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. (It's probably debatable given the errors you have... it is likely that your data are already parts of your device, which means that you must now rely on a backup you took before that happened.)

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

Maybe you are looking for

  • Why Thunderbird does not immediately

    Frequently, Thunderbird does not immediately and displays diagnostic tests, "Thunderbird on the response." It then displays the symbol of waiting (error in circle). He doesn't, but sometimes this happens with each key stroke. I'm about to give up Thu

  • I don't know that there is a virus in my Bios.

    I don't know that there is a virus in my bios.I can't scroll correctly en my pointing devices do not work properly.My cursor moves etc.This also happens when I look in the bios settings

  • Fn keys - x 1 bs20

    The 2013 edition of the bs20, there is not adaptive keyboard, the function keys F1, 2, 3 and yet... is also the buttons on the unit like mute, tune up. All swhitched using the Fn key. Y at - it an option to reverse the use of the fn, IMO. FN + F4 wou

  • How to extend the duration of the title

    Duration of the title - can anyone HELP In the middle of my film, I want to insert a title, the default value is time 03:50 seconds, I can't right click to get the red mark and drag it for longer. I even tried to insert a longer video and hoping the

  • Atheros 802.11 Driver does not not on HP Pavilion a6857c desktop PC

    Hello I have a strange problem with my capacity wireless on my computer. Initially, I had connected my computer to my WiFi with no problems, then a while later, start the computer, the wireless wouldn't connect. When I looked for the driver (Atheros