LR 3.6 - cannot save own tone curve settings

Similar Questions

• where are my sliders region on my tone curve settings panel

  I have Lightroom 3.3. Of after the tutorials and books that I have, there should be 4 sliders region directly below the tone curve. I don't have these sliders. Where are they? Any ideas...

  You are currently using the point curve. To switch to the parametric curve mode click on the small box at the bottom right of the curved panel.

• Qosmio F - cannot save the new BIOS settings

  When I go into the BIOS and when I make some changes and save them I can't. It seems that I have to restart. I have the latest version of the BIOS update. Come on Toshiba.

  Who do I contact to report problems like this or the fact that my function buttons still do not work even though I reinstalled the VAP software.

  Hi monte0682,

  Don t get me wrong, but before, we start a long discussion:

  Which laptop computer and the operating system you have?

• Cannot save the settings of e-mail from SAN HQ

  I used to be able to turn the notifications specific to the HQ of SAN.  I've updated a few times and had not tried for a while but now I can do it no longer.  When I try to disable an alert I say pop-up error: "cannot save the e-mail settings.  The SAN HQ was unable to save the message view recent changes.  Unable to save changes made to the Group (group name) because of insufficient access permissions or administrative credentials.  Verify that your account has all required permissions and administrator-level access to update the selected group. "Then I me it is a question of perm but don't know where.  SAN HQ connects very well to all my reports and datasets, etc.  Where would this leave?  Any help would be greatly appreciated, thank you!

  Your user and group must have all the permissions for the install directory where SANHQ has been installed.

  I'll try again with a local administrator account vs account domain.

• Camera tone curves, exposure and saturation profiles

  I use a home made camera profile, since the DNG Profile Editor was released. I much prefer the colors made by using a profile of a ColorChecker card for the provided profiles.

  My first profile was based on a photo taken using Adobe Standard, but I didn't like how the lighter tones looked washed out. So I created a curve custom in DNGPE, with a small dip in the upper half of the diagonal. Makes the lighter tones to colours .

  A few months later, I created a new curve point by default, with less of a boost in the light. This helped with detail in the sky .

  Recently, I realized that I'm adjusting the brightness slider a lot, and I realized that it is because the tone of my profile adjustment decreases the brightness of the mi-teintes. So, instead of setting the default to 60, I created another profile, with a tone adjustment higher in the medium and lower tones in lighter tones. Better default , but I am not satisfied by the lighter tones still .

  I think now, exposure down to about 1/3 tab to bring the color back in the faces of the people. I use a Nikon D300, and some people say that it tends to overexpose a little, but I'm shooting raw, and I would have not thought that it was a problem when it's not clipping.

  I use a default value of contrast of 25 and the average contrast curve points. When I slide the exposure down, I can see the histogram (ProPhoto) "no - bunching" at the upper end, and it seems to fit with the color back into the cheeks of the people.

  Help. I'm confused. Camera raw does something with a saturation at the top of the tone curve?

  Hi Yammer P, you cannot add an exhibition shifted on a profile directly, but as you know, you can have a + or - exposure correction built into a default by the camera, or a preset.

  On the other hand, pouvez have you a profile-specific tone curve. For example, in the DNG Profile Editor, you can use the second pane to change tone of a profile curve. So if the default highlights are a little light to your liking, you can change the profile curve to bring them down a bit. Then save the new profile.

  I understand what you're saying want to add a lighter areas overrun without the darker image overall. We do not have a control that does this directly, while others like the Saturation can help (as you discovered) if used moderately.

• Cannot save the no http bookmarks in firefox

  Cannot save the no http bookmarks in firefox

  Among the Favorites of standard Web sites registered on my IE toolbar, I have several of my own making html documents/pages. These start obviously by a non-http address.

  Include pages that contain an array of webcams on one page or a page that opens several sports venues each in their own tab, or strip of video covering windows live tabs stormchasing chase, weather radar, scanners of emergency etc etc.

  An address would take the format on the lines of
  'C:\Documents and Settings\All Documents\Football results and Tables\UK.html'

  Firefox insists on adding "http" before the C:\ (and unlike IE, it also adds the %20 for space.)

  Can someone help get FF to accept a favorite that is not a Web site.

  It's ok I just solved it me, waived the need to type %20 for each space.

  Need to add before c: the following

  file:\\\

  So a sample address

  file:\\\C:\Documents and Settings\All Documents\Football results and Tables\UK.html

• How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

  Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Windows Photo Gallery - cannot save the changes when you edit a photo

  Photo Gallery - cannot save changes

  When you edit a photo, I get this message: "unable to save changes to this picture because library has encountered a problem." I tried various things I found online (several threads on this site as apparently others have experienced this too), but none of the ideas allowed. Here's the thing, it worked for years until now. Last week I played ignorance a little with my services, disabling some supposedly speeding up my computer and also played with my Start menu. I don't know that I've changed, however. Can any particular service being disabled cause this problem? Thank you and have a nice day.

  When you edit a photo, I get this message: "unable to save changes to this picture because library has encountered a problem." I tried various things I found online (several threads on this site as apparently others have experienced this too), but none of the ideas allowed. Here's the thing, it worked for years until now. Last week I played ignorance a little with my services, disabling some supposedly speeding up my computer and also played with my Start menu. I don't know that I've changed, however. Can any particular service being disabled cause this problem? Thank you and have a nice day.

  =================================
  I have collected the following information from various places...
  If there is something you haven't tried
  may be useful:

  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker-cannot save the film project

  Save movie maker file as a movie file.

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  ==============================
  More than likely one or more of your source
  the files are not compatible with Movie Maker.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot save the image after you change

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Cannot save a photo if I shot it.

  I'm tableEn the pictures in Windows Photo Viewer. When I rotate an image and click on the next photo, an error message is displayed, "Windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of the properties of file." Here are the pictures that I have taken on my Iphone 4 s. I checked properties to see if its attributes are read-only, and they are not. I appreciate any help you can give! CLI. :)

  I'm tableEn the pictures in Windows Photo Viewer. When I rotate an image and click on the next photo, an error message is displayed, "Windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of the properties of file." Here are the pictures that I have taken on my Iphone 4 s. I checked properties to see if its attributes are read-only, and they are not. I appreciate any help you can give! CLI. :)

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• In Lightroom tone curve adjustment tool responds very slowly.

  When I use the tone curve adjustment tool in Lightroom, the curve follow my Wacom pen. It's the response is slow, not smooth and most of the time if prefer to move to the left instead of to the top. This problem makes it very difficult to make small adjustments. I tried to use a mouse and I still have the same problem. Another person had the same problem and solved? Can Adobe, you help me?

  Thank you

  Try the Wacom tablet preference file utility. First, click on "Backup" and save the file in a folder or office location.  Then click on 'Remove', which restores the default settings. If it does not improve the behavior of Tablet use the "Restore" button and select the file to backup with your previous settings.

  

• Forms, signatures... economy/cannot save

  Having a problem with the distribution of forms and functionality.

  I have forms that require signatures for multiple users. We distribute shapes on our own network. When some users sign and record the file, the file becomes ' you cannot save data typed into the form. Please print your completed form if you want a copy form your records. "make it unusable for users later. Also the functionality of sending is extirpated from the form.

  I have enabled Reader extensions before distibution and checked all the security properties to ensure that registration and signature are permitted, etc... nothing makes sense. Please help - time and pulling my hair out!

  Hello

  You must implement signature sectional for signature fields if you don't want the previous signatures to get each time struck down a new sign is placed.

  For the implementation, you must follow these steps

  1. double click a signature field to open the Properties dialog box.

  2. go in the tab 'signed '.

  3. check the box "mark read-only.

  4. in the drop-down list, select the option "all fields except these" and click on the button named "Pick".

  5. Select all fields except signature under development. for example, if Signature1 is the name of the field on which you double clicked, select all the other fields in the signature on the PDF except Signature1 and click OK

  6. close the Digital Signature Properties dialog box.

  7. Repeat steps 1 through 6 for all fields of signature on the Pdf document.

  P.S. If you want that all other fields also to be modified after the signatures, be sure to select them as in step 5 also.

  Post edited by: Atin Wadehra

• Cannot save edited image. Error message: "the file is already in use or left open.

  I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.

  Thank you!

  Description of the problem:

  Photoshop will not save modified files

  EtreCheck version: 2.1.8 (121)

  Report generated on May 30, 2016 to 19:09:40 PDT

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  iMac (27 inch, mid 2011) (data sheet)

  iMac - model: iMac12, 2

  1 3.4 GHz Intel Core i7 CPU: 4 strands

  12 GB of RAM expandable

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ℹ️

  AMD Radeon HD 6970M - VRAM: 1024 MB

  iMac, 1920 x 1080

  System software: ℹ️

  OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4

  Disc information: ℹ️

  Hitachi HDS722020ALA330 disk0: (2 TB)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  OPTIARC DVD RW AD - 5680H

  USB information: ℹ️

  Logitech USB receiver

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Apple Inc. FaceTime HD camera (built-in)

  Seiko Instruments Inc. SII Smart Label Printer 450

  EPSON EPSON scanner

  Nikon LS-5000 ED

  Seagate FreeAgent 1 TB FW

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  Western Digital my book 1140 3 TB

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Lightning information: ℹ️

  Apple Inc. Thunderbolt_bus.

  Guardian: ℹ️

  Any where

  Kernel Extensions: ℹ️

  / Applications/Toast 8 Titanium/Toast Titanium.app

  [no charge] com.roxio.BluRaySupport (1.1.3) [click for support]

  [no charge] com.roxio.TDIXController (1.6) [click for support]

  / Library/Application Support/Avast/components/fileshield/not signed

  [loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]

  / Library/Application Support/Avast/components/proxy/not signed

  [loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]

  / Library/Extensions

  [no charge] com.LogMeIn.hamachi (1.0) [click for support]

  / System/Library/Extensions

  [loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]

  [no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]

  com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  [no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]

  [no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]

  [no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]

  Demons of launch system problem: ℹ️

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.postfix.newaliases.plist [click to support]

  Launch officers: ℹ️

  [no charge] com.adobe.CS4ServiceManager.plist [click to support]

  [no charge] com.avast.secureline.update - agent.plist [click to support]

  [no charge] com.avast.secureline.userinit.plist [click to support]

  [no charge] com.avast.update - agent.plist [click to support]

  [no charge] com.avast.userinit.plist [click to support]

  [operation] com.carbonite.launchd.status.plist [click to support]

  [loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]

  Launch of the demons: ℹ️

  [failure] com.adobe.fpsaud.plist [click to support]

  [loading] com.avast.init.plist [click to support]

  [loading] com.avast.secureline.init.plist [click to support]

  [loading] com.avast.secureline.uninstall.plist [click to support]

  [loading] com.avast.secureline.update.plist [click to support]

  [loading] com.avast.uninstall.plist [click to support]

  [loading] com.avast.update.plist [click to support]

  [operation] com.carbonite.launchd.daemon.plist [click to support]

  [operation] com.carbonite.launchd.monitor.plist [click to support]

  [loading] com.carbonite.launchd.watcher.plist [click to support]

  Elements of user login: ℹ️

  Mail request hidden (/ Applications/Mail.app)

  iTunesHelper UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)

  Screenhero hidden UNKNOWN (missing value)

  Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)

  Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)

  AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)

  Internet Plug-ins: ℹ️

  LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]

  Web of Google Earth plugin: Version: 6.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]

  CoolirisWebKitPlugin: Version: Unknown [click for support]

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 6.0

  AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  The Safari Extensions: ℹ️

  Facebook cleaner

  Latest news

  1 - ClickWeather

  Facebook Photo Zoom

  Unplug

  Ghostery

  Dashlane

  Amazon search discount

  PriceBlink

  WOT

  AdBlock

  3rd party preference panes: ℹ️

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  TechTool Protection [click for support]

  Time Machine: ℹ️

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB

  Destinations:

  Feedback Up [Local]

  Total size: 999,86 GB

  Total number of backups: 50

  An older backup: 2016-04-06 19:21:02 + 0000

  Last backup: 2016-05-31 01:28:34 + 0000

  Backup disk size: too small

  Backup size GB 999,86 < (disc 536,90 GB X 3)

  By CPU process back to the top: ℹ️

  100% CarboniteDaemon

  3% WindowServer

  Console 3%

  hidd 1%

  1% adobe Photoshop CS4

  Top of the process of memory: ℹ️

  Com.apple.WebKit.WebContent 696 MB

  541 MB softwareupdated

  Safari 503 MB

  CarboniteDaemon 399 MB

  348 MB mds_stores

  Virtual memory information: ℹ️

  1.59 GB of free RAM

  3.24 GB of RAM active

  6.54 GB RAM idle

  1.51 GB RAM cable

  GB Page-ins 212,57

  Breaks in Page 443 MB

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Cannot save via TemPro

  Hello!

  A cannot save my laptop via TemPro. Always say, contact a dealer or other guys!
  I don't want to make a phone call. I want a support email address!

  For this great company * is not a public e-mail address * for product registration!

  Molnár; József
  It professional, system administrator

  of the Hungary

  > For this large company doesn't have an e-mail address public for the registration of the product!
  Check please the other laptop manufacturers and you will see that none of them have registration by mail.

  Toshiba and other companies have online registration.
  Online registration is under http://eu.computers.toshiba-europe.com/innovation/generic/services_warranty_reg_map_eu/ of Toshiba
  So be cool and the register of your laptop there.