LR 4 can't see cards

Similar Questions

• Satellite A200 - 1 M 5 - can't see cards of memory after re-installing Vista

  Hello
  I had to install the new Vista system on my laptop, cause I lost the cd of system restore.
  After installation, when I insert a SD memory card, the system cannot see. Previously a window popped and I could choose actions. There is no portable drive seen in my computer...
  It's the same thing when I attach my digital camera - no reaction from the system.
  Could someone solve my problems?

  p.s. sorry for my English, but I'm not good at technical slang etc, but I hope get you it right :)

  Hello

  First of all that the Satellite A200 - 1 M 5 seems to belong to the series of PSAE0 and you must choose exactly this model on the European driver Toshiba page if you want to download compatible drivers.

  Now, back to your question;
  Did you check if the SD card is recognized correctly?
  You should do this!

  The point is that you need the Flash Media Driver 2.0.0.6 for SD card controller works!
  The Flash Media driver is your bridge Media slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  If you have already installed it then I think you should reinstall it again

• iMac can't see SD cards

  My iMac can't see SD cards as before gradually.

  Disk utility cannot see the SD cards.

  All of my SD cards are good.  They can be read by other computers.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• NB100 - can't see the SD card in the BIOS

  Anyone know why I can't see my 16 GB SD card in the bios?
  It loads up as sdb1 when the computer is started, if it is recognized as a hard drive.

  Have discovered that it is the standard for many of the Atom based Netbooks. Still don't know why

• New HP Jet 7 with new 32GB SD card - can't see SD card on Stream 7 to all the

  I got a Sandisk Extreme UHS1 of nine 32 GB card and you will see all of the other systems I got (including Linux and Mac OS), read, format the card, etc. - the HP Jet 7 is not simply to see the map at all.

  I even formatted in another 8.1 Win in FAT32 system, 8192K Allocation units - always do not see.

  Yes - it is well installed.  What is the problem?

  After you apply on the 12-14 8.1 updates and updates of safety of 20-25 and a few reboots later - I can now see my SD card.

• BlackBerry smartphones can not see memory card when connected to USB

  At the same time whe connected to the USB port I could choose 'My Computer' and see the memory card but cannot be.  I can't see also it when it is connected to the Desktop Manager.  The device is connected and sync, but I have you will not access the memory card.  The only change I've made lately lazy tent.  It worked fine for awhile, but I deleted the application to try to recognize the card memory again.  On the BB, I can see all the photos and music on the map, the only problem is when connecting to my laptop.  I put in mass storage mode.  Any ideas?

  Cool!
  I'm glad that you fixed it.
  Please solve the thread so that others can find your answer faster.
  Thank you

  Bifocals

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• Can't see the cover and apple pay option?

  I restored my iPhone 6s of iphone6, after that I cannot see the option pay apple in my wallet but also can not see in the portfolio and apple pay option in the settings. But when I am trying to reset as a new iPhone I see these option as well as I can add debit card or credit card to pay for apple... Can help you with this question as soon as POSSIBLE please... ?... Looking forward to your help in this matter...

  Hello

  Tap the application portfolio and then slide up and down on your screen. You should see a circle with a higher right.

  Tap here then click Next and follow the instructions.

  Please click here > http://www.apple.com/apple-pay/

  Then scroll down to: Setup is simple with portfolio.

  You will see the circle with a sign + on the right.

• QuickTime player converted the video AVCHD in BDMV file and now I can't see it

  My QuickTime Player converted my video card SD of AVCHD in BDMV files and now I can't see it on my computer as the BDMV file opens with QuickTime Player, any other application.  Help, please!  Thank you!!

  VLC can play BDMV on a Mac files.

  

• Can not see all the networks Wi - Fi on Satellite P755-S5263

  Hello

  Just unwrap my gift: Satellite P755-S5263 and he can't see any wi - fi, I'm in the city and see a lot of networks on my BB and I press the touch button below the LCD for WE / OFF radio, nothing help, just orange light on the light wi - fi.

  No problems seen in Control Panel / networks, see Intel(r) WiFi Link 1000 BGN, works correctly and enabled, version of the 14.0.0.2 drivers.
  Is there any other secret of installation/swith that I don't know!

  I am on Windows 7, I really want to work today, appreciate your help. Thanks to all the guys.

  Gracias
  Viktoria

  Hello, Viktoria

  Perhaps is not activated WLAN card correctly?

  Please use the FN + F8 key combination and remember the wireless network adapter is correctly enabled.

  I hope this will help you.

• Satellite L20-101: can't see my WLan access point

  Hello world

  I have a L20-101. It worked well until we change our AP with 802n Apple AP again. I can see any other network, but I can't see mine.
  Any idea?

  Thank you

  Hello

  Yes, I have an idea ;) How about you change the WLan card?
  Seems that the new access point is not compatible with the wireless network for laptop card.
  Maybe the minPCI wireless network card does not support the standard wireless access point.

  What do you think?

• Can not see all the colors of Rayman 3

  IM on windows 7, I start playing rayman 3, but not all the colors imagined such as I can't see rayman and most of the things, I don't see any, I see little things like the background and that's it, u can you please help identify my problem, thank you.

  I would first of all that the game is patched and perfectly up-to-date.

  So I would like to confirm that all your hardware drivers (specifically the video card) and Direct X are up-to-date.

• How can I see in LabVIEW if an axis is enabled or disabled?

  Hello!

  I know not how to set the axis in enabled or disabled, but how can I see if the command has been executed when you use LabVIEW?

  I use a movement card 7340 PCI with encoder feedback.

  Concerning

  OLA

  Sorry, I noticed just this VI is not compatible with cards 73xx !

  

  Give reading by axis Status.vi to try. According to below extract assistance, I'm not shure if the Motor Off bit will reflect the State enabled axis.

  

• Can't see installed and shared printer

  I can't see my hp printer installed and shared on a new Lenovo A58e ThinkVantage Desktop PC with windows XP from ThinkPad running windows XP.

  I have set up working groups as well, appropriate manually and by the network installation wizard.

  I have a checked and made sure that the file and printer sharing are enabled in the network adapter properties page.

  I checked in the Toolbox of Lenovo and it says that the file and printer sharing is enabled, so the printer is shared also.

  I also disabled McAfee firewall and Windows Firewall.

  NOTE: I met a similar problem before with ThinkPad Laptops, when the file and printer sharing would not stay active in the properties of the device, found the problem being to think software, specific to 'Think access', the software kept turning off files and printers, sharing, so I allowed him by the profile of the software Manager, and all laptops could see file sharing and printer.  However I don't see any 'Think access' software, just the 'Lenovo' Toolbox

  Thanks for your time, everyone.

  go to the network properties and install the IPX/XPS/Net bios strictly only for printer sharing network card only.

• thumbs down, or so the screen goes off the screen so I can't see the buttons that are usually at the bottom of a window

  many windows, I saw that the height of the window is more than the screen size, so when I need to change a setting in a program I have to hope that it has a scroll bar (and even then the buttons are sometimes even below the scroll bar!) sometimes I can can restore down the window and move it to the top just barely enough to see the buttons im trying Click, but it does not work normally. Ive tried right clicking and pressing the up arrow key, but as soon as I move my mouse to click on it, the window moves back to where I can't see the bottom. Ive tried to change the resolution, updated my graphics card (geforce 8400 gs) and I got a dvi cable to hdmi, but nothing has worked. can anyone help? Note also in accompaniment first, I went to the web site of official support from microsoft and tried to ask someone there, but when I got a screen asking me for money because "my product id has expired" I decided it didn't f * & how I was going to pay microsoft to fix one of their problems, which is not only a huge inhibitance of King , but was completely on their end and I just wanted to know if im being too critical or what

  What to do exactly? I tried pressing and with first alt and shift and using the arrow keys, but he just selected different things in the window instead of move or resize: (, too, which is shoft, that was a typo, or something else? so far every time I move a window, she moves just when I move my mouse.)