LR3: anyway to increase the visibility of the overlays culture and its grid?

Similar Questions

• Is there anyway to increase the download limit?

  I have exceeded the daily download limit and I will probably exceed the monthly limit too (I'm downloading all my family photos). Is there anyway to increase the limit?

  None

  You can request that Apple offers - http://www.apple.com/feedback/photos.html

  LN

• Increase the video memory and speed on Inspiron N4010

  I would like to play Crysis on my laptop. can I increase the video memory and the speed of the bus of the integrated graphics card intel?

  N °

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• APEX 4.2 by aligning the number of the point Stop and Start Grid Layout

  My APEX application is moving from 4.0 to 4.2.  I have a problem with alignment (justified left margin) of Stop and Start Grid Layout of items that have a border around them.  Earlier, I had a problem with the border itself not appearing is not in the application of 4.2.  I managed to solve that with a workaround by adding inline code in the CSS of the page section: #P23_OFFICE_START_TBL {width: 682; border: 1px solid #369; margin: 5px;}. This has created the border I needed, but there are 2 Stop and Start Grid Layout products that are indented and not in line with the previous line border.  I tried a number of different things, but none of them have worked.  This seems to be a very simple matter to fix, but I'm having a difficult time.

  I tried to put the item in a different grid, which corrected the indentation, but then I lost the border around the element.  It seems that the CSS code above does not work on the new grid.  I also tried to set attributes such as margin-left: 5px; float: left; Clear: left; float: left in the CSS code, but that didn't work, too.

  Any suggestions?

  Thank you

  Ajay K

  I deleted and added the points Stop and Start Grid Layout not lining up properly.  It worked.  Apparently, the upgrade from 4.0 to 4.2 did not handle/convert these elements correctly.  Deleting and adding their backs has solved the problem.

• Can we get the current username and its list of adf taskflow BPM roles?

  Hi all
  
  Can we get the current username and its list of adf taskflow BPM roles?
  
  Regadrs,
  Sam
  
  Published by: Sam on February 28, 2013 23:17

  Yes. Please refer to the link - https://blogs.oracle.com/bpmbestpractice/entry/bpm_adf_task_forms_checking

  -Gerard

• Tried to increase the bootcamp partition and now Windows will not boot

  I've got Yosemite.
  I wanted to increase the size of my bootcamp windows partition, so I searched for a way online, and I found this video:

  https://www.YouTube.com/watch?v=zhkdOLXT6Eg

  I followed all the steps in the video, but after you have started and to complete the process of the Minitool partition Wizard I got this screen:

  http://i.imgur.com/bRnDQuJ.jpg

  This is what looks like my disk utility:

  https://i.gyazo.com/ee9967fc7ac9a2d1ad9afc5cde2f3529.PNG

  It seems that free space is always there

  Is there a way to fix this?

  MiniTool is not recommended because it causes problems and can lead to data loss.

  OS X Terminal please after the release of the following OS X Terminal commands. Enter your password when you are prompted by the command 'sudo '.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  Do not change the partitioning information any more, otherwise, you will lose your Windows data permanently.

• Increase the C: drive and reduce the E: drive decrease?

  Hi all

  My c: drive------fills constantly which is causing the overall performance of my laptop to be very bad. It is very slow! I don't have a lot of files etc on my C: drive, but it still keeps filling in shortly after a cleanup and defragmentation. My E: drive is constantly empty and I want to be able to use this space on my C: drive.

  I don't want to move the files to the E: drive 'free' space on C: because I don't have a lot of files on C: to move.

  Can I change the volumes of each drive to increase the capacity of C: and diminish the ability of e: or can I remove E: and give all the space on C:

  Any help would be appreciated?

  Thank you
  Colin

  Hello Colin

  In General, you can do what you want and all this can be done in computer management > disk management.
  I don't know what model of laptop you have, but for laptops with HARD drive recovery image, it is not recommended to change the partition structure because it can have a negative influence on the HDD recovery procedure. If you have ever portable model and you created the recovery DVDs then you can do this. For the installation of the OS, you can use recovery disk installation only.

  Back to your question.
  In my opinion there is no great sense to change this structure of score because you can use the free space on the second partition for your daily activities. I don't know what you're doing exactly, but all your data like mp3s, pictures, movies, office stuff, and anything else can be saved on the second partition.
  You can also set the second partition as the target of download and all files you download will be saved there.

  Your sentence is a little strange to me.
  > You wrote
  > I do not want to move the files to the E: drive 'free' space on C: because I don't have a lot of files on C: to move.
  So I wonder what you do to fill the C partition, but there is nothing to move. Can you please explain it to me?

• Photos.app: Are the functions 'culture' and 'rotation' jpg lossless?

  For jpg files, there are ways without loss to change.

  https://en.Wikipedia.org/wiki/JPEG#Lossless_editing

  For example rotations and cultures.

  My question:
  Are the functions for jpg lossless ' rotation' and 'culture'?

  Thanks for your help.

  All changes in the Photos are lossless, except if you use photo editing extensions.  Photos stores the original images and a description of the adjustments to be applied to the picture, and if you add more settings, all changes will be calculated from the original main image file. YOYYu can always undo changes and revert to the original.

  However, if you export the edited pictures version, the final version will be made to TIFF to JPEG, and the amount of the losses depend on the JPEG quality you select or the size in pixels.

  Export a cropped or rotated image will result in a smaller file size.

  But while the picture is in Photos all settings are stored in the photo library without loss.

  If you use Photos of externally modified image photo editing extensions will be returned in a new and more original image file the original image file. You will still be able to return to the originl, but no longer be able to cancel all the menu sepaarately sub-mode.

• When Firefox is being upgraded to allow the toolbar Google and its search history to stay

  Firefox 3.6 allows Google toolbar and search history drop down.
  Firefox 3.6 will not support much longer, according to your
  Web site. I upgraded to Firefox 4 and lost the functionality of Google. I upgraded to Firefox 5 and, again, lost the functionality of Google. So I stepped back to Firefox 3.6. Why are you excluding Google, and when are you going to fix it if I can use it and its historical research page?

  The Google toolbar is developed by Google , and they decided to not release a new version of their toolbar which is compatible with Firefox 5.0. See these Google articles for more information:
  
  Toolbar not available for Firefox 5 or newer versions
  
  An update on the toolbar for Firefox

• HP w2558hc monitor has a webcam and microphone and several other devices, a usb hp dpf device its saying is not not up to the standard ATA and its says that I have to get woth 3.manufactuere on an update of the firmware

  the monitor HP w2558hc has probles in invironemnt MS7 hp pc doc when you have the web cam pluged you get 3 errors, everything goes back to the devices in the monitor and it takes the current drivers for the devices in the monitor.  MS7 microsoft must get the drviers for this device, the bits of worsk web cam report of errors with the devices when its plugged the webcam has its own cable usb cable, he dislikes this donor ms7 pilots it. We have attached to delteing the drovers for devices and you get errors in the doctor of hp, it is said that he needs a firmware updat ATA standards.  HP no has no drivers for this and ms7 even when you the old drivers and let windows find them they are incorrect.

  Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• disable the Popup LOV and its icon in a tabular form

  Hello

  My requirement is

  I want to disable Popup LOV and tabular icon.

  If I select the first value in column selection list 'A' then second column Empname disable window popup lov

  and if I select 'B' and then select empname popup lov.

  Kind regards

  Arianne.

  Hi ujwala1234,

  ujwala1234 wrote:

  I want to disable Popup LOV and tabular icon.

  If I select the first value in column selection list 'A' then second column Empname disable window popup lov

  and if I select 'B' and then select empname popup lov.

  You can do it by using dynamic action.

  Use the javascript code in the next thread to turn lov popup tabular icon.

  Reference: How to disable the popup LOV (query based LOV) in the form

  and related to put on over ReadOnly rank tabular thread

  NOTE: instead of setting custom "row_item_disabled" CSS class use the integrated class APEX "apex_disabled."

  If it is still impossible to solve, re - produce the question on apex.oracle.com and share the credentials from the workspace.

  Kind regards

  Kiran

• What is the vertical offset and its use?

  What is use and movement of the base line?

  What is the movement of the base line and employment?

• Adding items to the multicolumn listbox and its headers

  How can I addEMS in multicolumn listbox and its headers?

  I don't see changes in CS4 is how to change the number of columns and headers to display.

  Thank you.

  Hi kingkai101,

  To configure headers, the columnTitles of the list box Properties attribute value an array of strings. To add a line, use the add() method of the ListBox to add 'something' for the first column of the row value, then the following columns are set using the value of the text of the element table [] subitems.

  I have attached a sample script. Hope it is informative.

  Jeff