LR4 printing module: print on the edge of the paper

Similar Questions

• Printers HP 8630 (all-in-one): ON HP 8630 is there a quick way to print from the paper locked tray (using a Mac)?

  ON theHP is 8630 printer a quick way to print from the paper locked tray (using a Mac)?  I normally print from tray 2 and special letterhead in a status bar.  It would be nice to choose letterhead in Tray 1 at time of printing without having to reset the printer manually.  Is there a way?   Jim1949

  Hi @James1949,

  The application, click file and then click on print.

• LexmarkX1270 of acts that it was printing but the paper comes out blank.

  Since the installation of a new black cartridge in the printer, it works as it was printing but the paper comes out blank.  I tried to reinstall the drivers of cleaning cartridge.

  Let us know what happens after you try with another cartridge.

• M651dn: with manual duplex printing only the paper size custom

  Hello

  I have a strange problem with several HP printers in my office (cp4525dn, 401dne, M651dn).

  Automatic duplex printing works as usual if I use plain paper A4 format.

  But when I use a custom paper size (21 x 21 cm), then the 'duplex manual' appears on the screen with the information I need to deliver the document again.

  It's strange. -That someone has an idea if this could be a bug or it's 'normal '. But automatic duplex should work too much here, I think. What you mean?

  It makes no difference if or USB-connected to the local network. I also tried different drivers, without success.

  Thank you very much

  Daniel

  According to the manual the User Guide Laserjet Pro 400 M401 , automatic duplex printing is not supported for custom paper sizes.

  

  It goes the same for my printer LaserJet Pro 400 MFP M475dn .

  I guess the same applies also to CP4525dn and M651dn models.

• print photo on the HP 7510, the photos are printed on the paper. How can they be corrected?

  I use a HP photosmart 7510

  the op of the pc OS is window7 64 bit

  There is no error message

  the printer is just this week installed. so there is no update not far

  Print photos, they are shown acoss the paper. This happens on diffenrent formats, for example 10 x 15 cm on A4 size

  Hi there z45I150,

  First lets try to download and run the doctor print and scan located here:
  http://support.HP.com/us-en/document/c03275041

  To ensure there is no software problems, the origin of the problem. It can fix its own much and if not to give a better idea of what is happening. Also can you tell us what program you print from?

  Good luck!

• I bought a new black ink only to replace, but I tried to print but the paper is empty

  I replaced my old black ink, but isn't working paper comes blank

  Hello eliza1225,

  Could you let us know the model of the printer you are using?

  -Bryan-

• LR4 - book Module - none of the custom formats?  Automatic layout works only on odd pages?  Bug reports.  Thoughts.

  I'm a photographer wedding and Portrait Professional & thought it may be useful to others & Adobe to share some thoughts and questions.

  I just ordered LR4 yesterday 3/7, as soon as I saw he is out =) I'll have the software delivered to me, but in the meantime, I downloaded the trial version of the LR4 which I started to play with today.  BTW is identical to the full version trial version but active only for 30 days?  Or some of its limited features?

  I had a few questions about the book module.  Some of them I think that are bugs.

  • Is it possible to enter in custom formats?  I don't see that see there is an option for 5 sizes and impossible to find another option.
  • I tested the automatic layout function.  It automatically layout, but only on odd pages, even pages are left in white.  Could not find a way to settle this.  (Updated, I like the white page feature, it gives extra room for manoeuvre to change the page layouts and for me it's easier to delete a page that Add.)
  • When you add favorite layouts I can't add page spreads to my favorites.
  • When I press tab to get rid of the side windows, I can't scroll further down in the book.
  • The navigation on the left and right arrow buttons do not directly work in the main screen.

  First impressions:

  (after only playing with him for an hour)
  

  It would be nice to have more control over preferences in the book such as the particular custom formats Module.  As it is, it feels unusually restrictive.  That said I am very excited by the possibilities that this may cause.  From now on I'd still certainly the final layout in PS, but I hope I do the initial design approximate layout using this new book module.  Looks like it could save a lot of time and be much easier to do this step in PS.

  Data sheet:

  Windows Vista 64

  Trial version of Lightroom 4

  Any answers would be more useful!  Thank you!

  Grace Lightner

  Grace Lightner photography

  http://www.gracelightnerphotography.com/blog

  I had a few questions about the book module.  Some of them I think that are bugs.

  • Is it possible to enter in custom formats?  I don't see that see there is an option for 5 sizes and impossible to find another option.
  • I tested the automatic layout function.  It automatically layout, but only on odd pages, even pages are left in white.  Could not find a way to settle this.
  • When you add favorite layouts I can't add page spreads to my favorites.
  • When I press tab to get rid of the side windows, I can't scroll further down in the book.
  • The arrow on the left & right navigation buttons do not directly work in the main screen.

  Let me first, I'm not an expert on ledger. Yes, I used it for a while, but many components of the module are much too dark for my taste. In fact, you have identified certain aspects that left me scratching my head for the months, not hours or days.

  1. Custom formats is not directly supported at the present time, but I understand that users will be able to create their own page/models using Adobe Illustrator. I can't say when this facility will be available well.
  2. To change a page layout (left/right pages, etc.), you need open the Preset automatic page layout editor. To do this, choose the form Edit Auto Preset layout from the menu editor drop-down preset (directly under the header Panel automatic layout)
  3. Have noticed this myslef, I don't remember if it is a bug or a design limit.
  4. Not seeing this problem, it works very well on Mac OS X. try clicking on the scroll bar to make it active, it may help.
  5. Yet once again, not seeing this problem, the left and right buttons in the main window of content move from one page to another.

  It is also interesting to note, in case you have not discovered yet, preferences located under the menu book book. This is where you define what metadata are used to auto fill in the areas of text (for example, title or legend).

  I expect that one or more of the other pre release testers who spent more time than me in this module will probably be able to fill the gaps.

  Edit: I forgot to include the screenshot of the Prset automatic page layout editor

  

• I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

  Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• HP envy 7640: hp envy 7640won can't print from the photo tray

  Just put 10 Windows on my computer and now I'm trying to print from my computer on paper photo 4 x 6, it will do this even after I have change the settings to make sure that it does. Will print from the paper tray. Can you help me please. Very frustrating

  verna219

  Welcome @verna2197,

• HP Officejet want 5740: HP Envy does not print from the photo tray

  All of a sudden the printer refuses to print from the print bed.  I sat down today and photos of 4 x 6 successfully printed iPhoto.  When I went the second impression, it would only print from the paper tray.  All the settings are correct.  The window of the printer poster paper in all trays of correct size.  The printer settings are correct. I tried to restart the computer to reset, but in vain.

  Hi @KarenPM,

  I understand that you are having problems to print from the photo tray. I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Here are the steps to print the photos. HP ENVY 5540, 5570 Deskjet and Officejet 5740 - print photo printers.

  If you're still having problems, it may be a damaged printer driver, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try another application to see if you have the same results.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• print j4540 will not appear on the paper

  I replaced the color and black cartridges and the functions of the normal printer but nothing prints on the paper. I tried to clean the cartridges several times still nothing on paper. I have reinstalled the cartridges, unplugged the printer, still nothing.

  Any suggestions?

  Hi, take a look at this linkHP.

  If the test does not print with new cartridges most likely there is a problem with the J4540.

• try to print and mistake the light and the paper and ink lights flash. new ink in

  HP Deskjet F2210 all in one.  Windows XP.  Error lights when you try printing and the paper light and ink lights are flashing simultaneously.  New ink cartridges are.  I have reset the computor several times.  Also removed the print operation to try again, but the error light does not now turn off so there is no operations waiting to be printed.

  The steps in this troubleshooting page can help.

• The paper feed of my printer Photosmart C4680 does not work

  Hello

  I tried to reset my printer, but the paper source always pulls the paper on an angle and then crashes.  This seems to have started all of a sudden.

  Hi JeaniT,

  If you have the paper guides, set against the paper and that you have cleaned the feed tires there is a good chance that there is a small piece of paper stuck in the paper path causing the paper be introduced an angle. You may need to lift the printer to look at the paper path.

  http://support.HP.com/us-en/document/c01673676

• The paper is considered "loading paper" and demi-alimentation when asked to print

  
  

  Looks like you may have set to print on a different medium of what is in the printer.  If you go to file then Page Setup, make sure it is on your printer and the paper size matches what is in the printer.  Also, when you go to print, make sure the paper type (in the paper Type and quality fall down) is defined to match what is in the printer.

• My Epson NX125 printer goes through the paper without printing anything

  "What is required of ' Print Preview ' or 'Print' for my printer through the paper without printing anything.  Last few times he has done this, ink levels were low and I have renewed their but now they are all full and it will not print even though she goes through all the motions.

  See the printer manual or here

  http://files.support.Epson.com/PDF/nx125_/nx125_qr.PDF

  on cleaning the ink in the print head nozzles. In your case, the purp [ose of the exercise is to reload the path of ink and the printhead with ink.

  Tom Ferguson

• Photosmart C5280: a component ' to ' falling apart after the paper stuck. "

  I wanted to spring 6 pages, 2 of them when printed, then a stuck. I pulled it out, but when I tried to continue printing a stuck. This time when I pulled it out (it came out softer the usually), I found a black plastic piece down on the document reader.

  Here's an album with 4 photos of this component:

  https://drive.Google.com/folderview?ID=0B0K5k8LpitTlUDVJMnZMWGlrVXM&USP=sharing

  Please can someone tell me how to put it back in its place?

  Thank you.

  Hello @DimitrisPl,

  Welcome to the Forums of HP Support!

  I understand you have problems paper jam printing of your HP Photosmart C5280 All-in-one printer and after removing a jam you found a piece of black plastic at the bottom of the printer that needs to be reinstalled. I would like to help you to solve this problem today.

  To begin, please can I you click here for the jam troubleshooting steps. Once the support document opens please run through the Solution one, two, three, Solution solution and four Solution. This includes all sub-steps under the listed Solutions. Once we have determined that no other debris or jams are stuck in the print on your printer path, we will be able to reinstall this piece you found. Now, normally parts like this are non-replaceable. Therefore, it is not supposed to get out of the printer. However, I find in your printer which parts seems to come from a sector.  In the support document, I'm going to have run through to see the Solution three: step 1. The rear access area of your printer where the paper pick roller seems to be where will this piece of black plastic.

  

  The image is under "Figure 10' in the support document. I think that you can just cut that part into its slot. Once you have reinstalled the game, please try again to print.

  Please reply to this message with the result of your troubleshooting. Good luck!