650 HP laptop with Windows 7 32 bit Home premium RAM problem

Similar Questions

• printer compatibility with windows vista 64-bit home premium

  When I installed the software for an hp 5650 printer on my dell xps with window vista 64 bit family premium, I received a message stating that the operating system was not at a minimum level for performance maximum printer.  I printed a word document and photo, and they seemed very well.  What does the message mean?  Y at - it a upgrade for my os should I download?

  There is no upgrade of the software of the printer.
  HP wrote the software and drivers, not Microsoft.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01655752&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=304445

  Link above has HP workaround for problems with it.

  See you soon. Mick Murphy - Microsoft partner

• Windows Vista 64-bit Home Premium operating systems disks

  I bought my laptop with Windows Vista 64-bit Home Premium installed on it.  I've since upgraded to Windows 7.  Unfortunately, there are a few programs that will not work under Windows 7 little matter what I do.

  So, I would try to run a virtual Windows Vista system.  The problem is that I can't find my disk with the operating system of Windows Vista 64-bit Home Premium on it.

  Download the Windows Vista 64-bit Home Premium operating system so that I can burn a disc for a back-up or I can order a drive with the OS on it?

  Thank you!

  You can not upgrade to Windows 7, and then use the Vista OS you used as part of the upgrade to install another (even virtual).

  There is no Vista free download legal available.

  And Microsoft provide no DVD for computers of the brand OEM (Dell, HP, etc).

  Borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Could not map the drive from external hard drive to the new computer laptop with windows 7-64 bit

  I just got a new laptop with windows 7-64 bit.  When I try to map a drive on my external hard drive, it tries to connect but then returns the message "the network path was not found" I even tried to use the ip address.  The external drive is turned on and I can be mapped to other computers in my house.  When I click on browse in the drive, network adapter, and then click the network folder window, I see that what's on my pc.

  Hi katnoir,

  Follow the steps described in the links:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-error-code-0x80070035-Windows/84791143-B70a-4EC2-B700-98df657fe45c

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-logon-unsuccessful-during-map-network/055d61a5-00d0-4798-9e98-66e6ba0726de

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ErrorCode-0x80070035-the-network-path-cannot-be/d2debc9c-afbb-497c-A0D8-a3e4e0137061

• Center Solutions HP for my PC Windows 7 64 bit Home Premium?

  Hi all

  Succesffuly I was able to install my printer HP 1400 of all-in-one series with my PC Windows 7 64 bit Home Premium.

  However, I can't activate the scan function or configure the printer scanning functions, since I don't have the software installled HP Solution Center on my PC Windows of Premum 7Home.

  This is the link to support HP for me to download tand install the HP Solution Center

  on my PC Windows 7 Home Premum?

  Thank you.

  Best regards

  -Warren-

  Hello world

  Follow the steps below and let me know what happens?

   

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

   

  1 download the drivers and full software features

  Note: Go to HP customer careand then enter your printer model. Download full feature software and driver and then follow the remaining steps below. If your product does not have the uninstall_l4 so please let me know what printer you have and the operating system you are using.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4 (.bat or .exe)

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• DVD won't play in Windows 7 64 bit Home Premium Media Center.

  I tried many DVDs in my Windows 7, 64-bit Home Premium system, and none of them will play in the Media Center, with the exception of a 1955 film that plays without problem. I guess it was a good year. In the lower right corner of the Media Center, a window says: "Play DVD - Windows Media Center cannot detect a video DVD in the DVD - Rom drive. Insert a video DVD in the drive." Apparently, the DVD is not detected. What is a missing codec problem? I read about downloading the Codec of the user, only to cause more problems, and I did a lot of searching for an answer to this and found a countless number of users having problems with DVD in Media Center and no collective solution. How can it be this difficult? What is the problem with Windows 7? Why can I play a DVD of a film of 1955 (Mr. Roberts) and not of today's movies? The only solution that I come up with to this day, even after checking with the maufacturer of my optical drive, should consider buying the codec itself, if that is what is lacking, or a DVD player to possibly of Roxio. But after the piece of hugh of money I paid for my software Windows 7, I would not have bought anything others of another company. I wouldn't think to go back to XP, but I've had far fewer problems. Any help would be appreciated. Don

  Hi Mary - thank you very much for your answer. My PC is a Dell Inspiron 530 desktop computer. I just got the phone is turned off after a few hours of troubleshooting with Dell hardware and software services. Dell is sending a technician to replace my optical drive. They hope that clears the problem, but if not, they say that I might have to reinstall Windows 7. This is happening due to your pointing me in the right direction with your post, and troubleshooting I could do before, I called Dell. I had different problems for a while, and maybe they'll finally get fixed. Thanks again, Don Don

• hp scanjet g4050 Windows 7 64 bit Home Premium incompatibility

  HP Scanjet G4050 are not accessible from Windows 7 64 bit Home Premium edition.

  Someone at - it a solution?

  Did you download and install the "full functionality and software driver HP Scanjet' for Windows 7 64-bit HP on the following support site: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3236374&prodTypeId=15179&prodSeriesId=3236371&swLang=8&taskId=135&swEnvOID=4063

  If so, and if it doesn't market still not there is a "HP scan Diagnostic Utility" at the bottom of this page that can help.  There are other resources of assistance from HP to the following address: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=15179&prodSeriesId=3236371&taskId=110

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• How can I copy a full hard drive from Windows 7 Professional to a new laptop with Windows 7 pre-installed home?

  I have a laptop with Windows 7 Professional older and want to keep my programs and files intact and transfer to a new laptop, with Windows 7 Home, pre-installed.

  First try the image restore option. If that does not work, use your professional Windows 7 disc and boot from it, delete all partitions, then attempt to restore image.

  Don't forget: save your Home Premium installation before doing any of this.

• Mobile gamepad XBOX 360 not recognized when connected to a Windows 7 64 bit Home Premium computer USB ports

  Very well - so a few days ago (Saturday ~ 2) (25. 2012) I connected to my XBOX 360 (Wired) controller on my Toshiba Satellite L655 computer laptop with Windows 7 ~ Home Premium 64-Bit. To my surprise, a Notification bubble popped up from the taskbar, saying that the "unrecognized USB device. It has malfunctioned. "

  Naturally, I took, waited a few seconds, and then reconnect the USB key. The same message has popped up. Now, I was angry. Repeatedly, I took and reconnected it all a few seconds until that FINALLY the 4 green lights around the button Guide everything illuminated and then back except the one on the upper left, which was the way it should have been.
  I went to the control panel and clicked on the 360 controller to see if he had any input. Nope.
  I pulled out once more, has waited a while and plugged in. No, lucky. The same thing happened again. The Notification bubble came, all 4 green lights on and then all four of them died. I don't know what happened.
  When I plugged the controller to the laptop the FIRST FULL TIME, he installed all necessary drivers in less than a minute and I was on my way. Every time after that, I have taken the controller into the USB Port and began to play. Now all the time, that is to say that it cannot recognize the controller?
  I've tried everything, even a system restore. Nothing did. I've uninstalled and reinstalled the drivers for a few minutes, there was an entry of the controller, then he went just blank.
  I need this controller in order to play my racing games, seeing the keyboard control just aren't the best. I don't know what the problem is, but I wish I had a solution A.S.A.P. Please, Microsoft, please. Help me!
                                                                                                                          
  
  
  
  

  I had the same problem, cannot find a solution that worked everywhere, including Microsoft support forums.

  About to give up, I remembered the old cure NDA, shaped, "why not?"  I've tried everything else. "So I've disconnected everything on the gamepad, blew in every connection and reconnected everything, by ensuring that the connections were tight.

  It has worked perfectly since then.

• My laptop with Windows 7 64-bit and 64-bit Internet Explorer 9 will work not MSN or MSNBC videos

  I can't get my laptop to run MSN or MSNBC video if I uninstall Internet Explorer 9 and back to IE8.  It seems that IE9 64-bit is not compatible with windows 7?

  Paul,

  I want to thank you for me filled in on why my system did not work in the 64-bit version of IE9.  As a result of your answer I also discovered that I have both IE8 32 and 64 bit versions loaded on my laptop and the 64-bit version will also not play video.  My Flash player is 32 bit and I don't know that this is my problem.  I think I'll wait for Silverlight 64 bit version is released and then update Flash Player and Silverlight.  Thanks again for your help.  Nice day.

  leehart

• Missing drivers for ProBook 6470 b laptop with Windows 7 32 bit

  I installed Windows 7 32 bit on my Probook notebook, 6470 PC b basic model and there are two features that I can't find the drivers:

  BCM20702A0 with the hardware ID: USB\VID_0A5C & PID_21E1 & REV_0112

  Unknown hardware device with ID: USB\VID_138A & PID_003D & REV0104

  Any suggestions?

  Thank you!

  Hello:

  You need these two drivers:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212922&prodNameId=5212923&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-104112-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212922&prodNameId=5212923&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-109053-1

• To load Family Tree Maker version 16 on laptop with Windows 7 64 bit

  I am trying to load Family Tree Maker version 16 on my lap top. I have Windows 7 64 bit and FTM claims, it does not load on 64-bit.  Whjat I do now?

  Hello howstreet,

  First, check to see if the program is compatible with the Windows 7 Compatibility Center.
  Family Tree Maker is recommended upgrade if your version is earlier than 2008 FTM.

  If you have an older application for Windows XP or Vista, which does not work in Windows 7, you can make it work properly by running the program in compatibility mode.
  1. to start, find the application or the shortcut which is the cause of the problem, and then right-click on it and select Properties.
  2. then, select compatibility in the menu tabs at the top of the properties page:
  3. now check the box run this program in compatibility mode "dethrone" and select the operating system you want to emulate. For most applications, this will be Windows XP SP2. Once you are finished, click OK.
  4. When you then run the application, it must run under compatibility using the OS mode you have selected. If it runs properly, try another selection of OS in step 3, and then try again.

  Run the installer in compatibility mode:
  1 right click on the file icon installation.
  2. click on properties > compatibility.
  3. Select the compatibility mode for Windows XP.
  4. click on OK.
  5. run the installation program.

  After installation, run the program in Windows XP compatibility mode by doing the same thing with the installed program.
  If this does not help, if you are running Windows 7 Professional or ultimate, you can try the program in XP Mode and Virtual PC. If you use the version of Windows 7 Home Premium, you can not use the XP Mode but can perform a search on the internet for 3rd party virtualization programs. You can find a few free programs that are very good.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• I'm looking for a Windows 7 64 bit Home Premium downgrade my 10 Windows on my computer hp pavilion dv6 laptop?

  Help.

  I have this hp pavilion dv6 bought in 2012 in Singapore. This laptop came with a pre-installed windows 7 Home premium 64-bit. Earlier this year, I got the free update of Windows 10 and I was happily obliged to update my windows 7 to windows 10.

  Few things I know, updates do not automatically at level my other drivers and software that was running smoothly in my laptop before upgrading. That was include my external hard drive I used to back up all my files once a month. My external hard drive has been iomega eGo 2 TB of capacity.

  To cut the story short, I now want to downgrade to Windows 7 Home premium 64-bit, one I had before, as many of my software are more able to run smoothly, and my hard drive with all my important data is now inaccessible, whenever I plugged the HDD in my pc.

  I always kept my original product key for windows, but I can't find a reliable source where I can download it again and reinstall it to replace the windows 10 today running on my laptop.

  Can someone help me with this?

  Thank you.

  David.

  How to: Reinstall or restore your original Windows installation after having evaluated the 10 Windows