LR6 will not install on my laptop, too many activations

Similar Questions

• CS5 will not install on my laptop?

  My laptop - windows XP

  I have Photoshop CS3 installed on this computer. I purchased a CS5 upgrade and installed OK on my desk. I then tried to install it on my laptop but the installation will not start even, he's just sitting there fat, dumb and happy, nothing. The drive works fine with other discs, music, programs, etc. I don't know either of you guru out there can help with this problem.

  Sure you have a DVD player in the book and not just a read/write CD player?

  I saw this happen, in fact it happened to me on one of my laptop which can have 2 drives in there. Main/fixed optical drive is just a reader of CD/R/W and I forget a few times and paste a DVD inside. Of course, nothing happens.

  If you these 2 PCs on a network, you can insert the DVD in the DVD desktop player (make sure that the DVD drive is shared) in the laptop computer connection on the desktop, click on the DVD drive and copy all files in the noteook and then install from the hard drive of the laptop.

• My HP Photosmart C309g printer driver will not install on my laptop.

  I am running Windows 7 64 bit. When I try to install the driver for my printer C309g (pilot of the basic functionality or complete) installation hangs during the first phase. Actually, the installation closes and disappears without any error message or explanation. When I tried to use the installation of HP software, he kept just the driver download and try to install it again and again.

  I tried the fixes on this site: http://support.hp.com/us-en/document/c00836418 I turned off finish it and stay programs and disabled the firewall.

  The most frustrating is that the computer can print a test page for the HP diagnostic tool and other computers and my iPad will be printed (using eprint on the iPad), but I really need THIS computer to print.

  Hello klucot.

  During the first phases of installation, there are a screen that allows you to configure your Internet options, which allows you to choose if you want to find the driver updates before you install the driver or not. Select that you do not want to search for updates and installation will pass.

  See you soon!

• Firefox will not install on my laptop using windows 7. I get a message saying that the installation has been interrupted

  Whenever I try to install firefox on my laptop, I get a message saying that the installation was interrupted. I use windows 7.

  Try the full installer...

  • www.mozilla.org/en-US/firefox/all/

• C6380 Wireless will not install on my laptop

  I try to install the C6380 wireless - whenever I get to the printer part to find the facility, it indicates there is no printer on the network.  The priter config. page displays the correct network name.  I am using windows XP and have downloaded the patch to service.  Any susggestions?

  First step is to check that your printer is on your wireless network.  Using the IP address of the printer, if you can navigate the printer web page?  If you can't, then restart the Wizard Wizard from the printer setup menu.

  If you can browse the web page of the printer, you can consider uninstalling the firewall, run the SW installation and the re - install the firewall.  This ensures that the firewall is disabled.

  A final element is to add a reservation your router DHCP IP addressed printer wireless.  In this way, the IP address of the printer will never change after installing the SW.

  Best regards / Jim B

• My HP Officejet Pro 8500 has more will not install on my laptop with an ethernet cable or wireless. I need help!

  I have a laptop Sony Vaio with Windows 7 and I can't install my printer wireless with my laptop. I tried to use the ethernet cable and troubleshooting, but no option doesn't solve the problem.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Complete National Geographic library 1998 will not install on my laptop Toshiba with Windows 7 32-bit

  I tried using the troubleshooting and compatibility. Without success. It allows to run on my desk that I did more. He was runing Windows XP service pak 2 and this is what Windows 7 has tried without success. 16-bit program is possible to install on this computer?

  I tried using the troubleshooting and compatibility. Without success. It allows to run on my desk that I did more. He was runing Windows XP service pak 2 and this is what Windows 7 has tried without success. 16-bit program is possible to install on this computer?

  Probably not.  The compatibility issue is one that you need to ask those who have created the application and not Microsoft.

  You may be able to run inside a virtual machine.

• Vista will not start on my laptop, tried many different things and nothing seems to work

  Hello.  Before we begin, I want to say that I spent the previous two days, researching my problem and have not yet find something that describes my specific problem...

  I have a laptop Compaq Presario C700, I received my mother-in-law a few years ago.  It is installed with Vista (SP2 I believe, I can't confirm as you'll see below) and I got Vista point random other problems experienced, but I've usually been able to find an adequate solution - up to and including restoring to a previous restore point.

  Two days ago my laptop decided not to start Windows.  When I turn on the laptop, I get the usual Compaq splash showing the different options that are accessible through the F keys.  The screen then goes, after displaying the message "ready for the OS to boot".  It then goes to a white screen that displays a flashing cursor (like a prompt command, just without the drive/directory indicator).  The hard drive light flashes every 30 seconds, or so, but it is y no movement in the HARD drive that I can not hear it or feel run as I usually can.

  At this point, my first step was to use the option of recovering your system of the Compaq splash screen, but leading to the same blinking cursor and a white screen.  Then I went into the BIOS and confirmed the boot order was OK and ran the Self Test on the HARD drive and memory, which gave rise to no problems found.

  It was my first choice because, as you have probably guessed, the laptop came preloaded with Vista and my mother-in-law had no startup disk.  As a result, I found a boot/recovery iso disk for Vista SP2/SP3 and burned it on a CD.  When I boot from it, I get the initial page, offering to install Vista with a link to the System Recovery Options.

  The first option, I ran has the Startup Repair.  It only detected no problems with the commissioning.

  Then, I used the system restore option, trying to restore to each of the 7 restore points, of which none has solved the problem.

  Finally, I opened the command prompt and tried a chkdsk c: command found no problems with the HARD drive.  I didn't run the command chkdsk c:/f/r as read-only mode has not found no problem to be fixed.  I was reading a few forums different tech and found a post suggesting to try the sfc/scannow command...  I tried, you enter at the prompt like:

  X:\Sources>SFC/SCANNOW (X:\ is my DVD drive) (Oh and I am the administrator, I believe.)  The title bar of the command prompt window displays "Administrator: X:\windows\system32\cmd.exe")

  He returned "start system analysis. This process will take time. "Then, about 5-10 seconds and I get"Windows Resource Protection could not perform the requested operation ".  So I tried to change my directory to C:\ and run the same command and got the same results.  Then I tried to go to D:\ which is a small partition of my HARD drive and it ran there, with the same results.  So, I tried the following commands:

  Damaged X:\Sources>SFC/SCANNOW = c: \ /offwindir = c:\windows

  Damaged X:\Sources>SFC/SCANNOW = d:-/offwindir = d:\windows

  These are not returned the "start scanning system. This process will take some time. "message, but they returned the same message from Windows Resource Protection.

  Finally, I removed the battery, disconnect the AC adapter, pressed the power button in the hope to evacuate any overage charges into the motherboard, waited 5 minutes, plugged the adapter back, turned on and still have the same problem.  Other forums started suggesting withdrawal and re - insert RAM chips, disconnect and reconnect the drive of HDD or DVD and other hardware items that I really hope I don't have to deal with - I'm kind of klutsy when it comes to playing with the material and I really don't want to take the risk of breaking something.

  Anyone, anywhere, has all the possible suggestions?  I don't have an Installation of Vista disc, nor do I have the original product key code, so I can't reinstall Vista.  I have not the slightest semblance of Vista to load, even the F8 key to appear the option of safe mode because the laptop is never to the loading screen, so I can't try to download/install updates to windows.  What I do then, short by using the "Restore the whole PC" option in the system recovery?  If I use this option, it will scan all my files and folders or it works as the restoration system, where he erases only the updates and software installed since Vista was initially loaded on the PC?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the verification and startup repair if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• HP Photosmart C4780 all-in-One: Photosmart C4780 will not install on laptop dv7 Pavilin

  My C4780 will not install on my computer laptop dv7. I downloaded the current software on the HP site and tried to use the disc that came with the printer. In both cases, that the installation program begins to run, goes through four steps and when it is installing updates, it disappears from the screen. I do not understand that because it has been installed and operating at once through my wireless network and still work on my desk. I totally uninstalled all the software before you try to reinstall. I even checked to ensure that the appropriate records were in place after not install for the first time. I went through this about six or eight times, try different things each time. I also disabled my antivirus (Panda Cloud AV) and that made no difference. At this point, I'm out of ideas and really need help. I also read some relevant posts in this forum without good results. I need help in the worst way! Thanks in advance for any help.

  Sorry it took so long to get back but things have been hectic. I really believe that my problem was one or more files that are damaged somewhere, so I took the easy way and installed Windows 10. After that I installed the printer and everything is fine now. But I really appreciate your help.

• Pavilion dv6 - 6153cl laptop - will not install the video drivers.

  Recently, a friends Pavillion dv6 - 6153cl laptop started bluescreens frequent (many x 50 on igdpmd64.sys).   (on Win7 64 bit, completely up to date)

  I came across this site and downloaded the current drivers but try as I can, they will not install. The message implies that they are bad drivers, but I have confirmed that they are the 2 parters - driver package AMD, including ATI and Intel drivers for the video "switchable". Most of the AMD install - except the 2 pilots and the C++ package components. AMD checks prior approval from hardware to install and does not renounce it.

  The error is:

  "this computer does not meet the minimum requirements for installing this software.
  or it just keeps trying to install it until it skips this step and goes to the next component, which gives the error the failure at the end.

  I searched this site and found a number of references to similar problems. I've updated the BIOS, all other drivers, removed the old drivers (it is now running on Win VGA drivers), updated part of HP software, run a repair on Windows update and Installer, tried the previous version available, uninstalled C++, cancelled prior unpacking, checked Mode drivers safe, ran HP Support Assistant and tried to manually launch the installation program in compatibility mode admin.

  Windows Update also wanted to update the 2 drivers but who do not. Twice. He will probably try again.

  I ran sfc and Auditor - alls well with the other drivers.

  There is no obvious change that percipitated the question.

  The WinUpdate KB2670838 that sometimes causes a similar error has not been installed.

  The system works at normal temperatures. And it stopped crashing. But only 600 x screen resolution.

  Any suggestions on how to get the drivers to install?

  My friend decided to hold the laptop store as they needed more functional. Of course, they were able to update the video drivers well obviously had a problem with an obscure audio problem. (audio drivers have been included in the package of video driver HP that they perhaps do not use) All is now well and unfortunately I cannot report on what drivers, they used to solve the problem. Thanks for your help, Zak

• I have a kodak esp6150 printer, try to install on an asus laptop k601j running windows 7. driver will not install keeps giving an error.

  driver will not install keeps giving an error.  Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer.  installs fine on other computers in the House. for any help or suggestion would be appreciated.

  Try to download and install the latest drivers for Kodak for the ESP 6150:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

  Troubleshooting of the printer:

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• My Lightroom license will allow me to install Lightroom on 2 computers?  I have it on my desk - recently bought a laptop in order to exploit photoshoots.  You want to install on the laptop too.  Problems?

  My Lightroom license will allow me to install Lightroom on 2 computers?  I have it on my desk - recently bought a laptop in order to exploit photoshoots.  You want to install on the laptop too.  Problems?

  Your license allows you to have two working facilities.

• computer laptop 15-fo39wm: updates will not install

  I have updates that will download, but will not install

  Hi @help987 ,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you encounter a problem installing your Windows updates.

  Please try these steps.

  Method 1:

  I would suggest to run Windows Update to convenience store and check if it helps.

  (a) press the Windows Key + W key on the keyboard.
  (b) resolution of the problems of type in the search box, and then press ENTER.
  (c) select Troubleshooting. Click on show all the and select Windows Update and follow the on-screen instructions.

  Method 2:

  I suggest perform you a boot in minimum mode and disable the security software and check if you are able to install windows update manually.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  (a) press Windows + R Type msconfig in the search box and then press or click on msconfig.

  (b) the Services of the System Configuration dialog tab, tap or click to select the hide all Microsoft services check box, and then press or click disable all.

  (c) on the start-up of the System Configuration dialog tab, tap or click Open the Task Manager.

  (d) the tab to Start in the Manager of tasks, for each startup item, select the item, and then click disable.

  (e) close the Task Manager.

  (f) on the start-up of the System Configuration dialog tab, press or click OK, and then restart the computer.

  Note: once you have finished troubleshooting, follow the steps in "How to reset the computer to start as usual after a repair by clean boot " to reset the computer as usual.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Download and install the update manually and check if it helps.

  Follow the steps to install the update manually:

  a. go to the Microsoft Download Center page

  b. type the number in the search box and press ENTER.

  c. download and install the update and check if it helps.

  You can see the steps in the following Microsoft article.

  Problems with installing updates

  Good luck!

• Envy Notebook M6: M6 Notebook Envy will not install updates

  Hello

  My laptop will not install updates. He will get all the way to the end and then will say that he was unable to complete the updates. He then proceeds to uninstall and even repeats the process. I need help! Thank you!!

  Hi @Ashmeister,

  It was my mistake, I have worked with many customers Windows 10.

  Try to follow the step of Microsoft solve problems with installing updates

  I hope this helps.