HP Envy Phoenix desktop 810-080 - stock

Similar Questions

• HP ENVY Phoenix Desktop - 810 -: replace wlan card 2 .4GHz with wlan card dual band or 5.0 ghz

  Hi everyone I would replace wlan card with wlan card dual band or 5.0 ghz 2 .4GHz, this computer came with this outdated map

  Wireless - HARRIER BGN 1 x 1 BT4 CB 752597-001

  I want to be able to watch online and buy wlan with double band or 5.0 ghz card which will run in my computer

  Thank you all very much for your time

  eppsberg wrote:

  Hi everyone I would replace wlan card with wlan card dual band or 5.0 ghz 2 .4GHz, this computer came with this outdated map

  Wireless - HARRIER BGN 1 x 1 BT4 CB 752597-001

  I want to be able to watch online and buy wlan with double band or 5.0 ghz card which will run in my computer

  Thank you all very much for your time

  Hello

  I think so. Because it is a desktop computer should not be restrictions on wireless cards. Get a map of 5 GHz, and move forward.

• HP ENVY Phoenix Deskto 810-209: keyboard

  Just got my new

  HP ENVY Phoenix desktop PC 810-209 (ENERGY STAR)

  But no instructions for the keyboard. There is no serial number so I can't find the instructions for.

  It is the image. Please helpplease help

  Sorry, but the graphics is not always displayed.

  Here is the link to the product page for your PC: http://support.hp.com/us-en/product/HP-ENVY-Phoenix-810-Desktop-PC-series/6879036/model/7105499/solutions

  If you have any questions using the keyboard with Win10, there is a understanding and using Windows 10 document available from the HowTo button on the product page.

  Good luck

• ENVY Phoenix Desktop - 850-065: Add the port ethernet on the desktop

  I want to add a second ethernet port on the desktop... any recommendations, the Gathas, the various factors to consider... I seem to have three ports of extension on the PCI bus... one of them would be the target (or what)... any recommendations on ethernet brand and model to consider...

  Any wisdom on the subject will be sincerely appreciated...

  Hello

  There are many models/products of ENVY Phoenix Desktop - 850-065 series. In any case, according to your description you can use a normal PCIe 1Gig card. There are a lot of cards around, 1 port, 2 ports or more. Please make sure that there are drivers CD or at least it shows you where to find driver (from the site of the manufacturer).

  Kind regards.

• HP ENVY PHOENIX CTO 810-135QE - 600 watts power supply Question

  In the near future, I would like to upgrade the video card in my desktop HP ENVY PHOENIX CTO 135QE-810 GT 640 default to something a little more powerful and I was wondering if there is any details about the default 600 watts power that will help me in my decision to the next video card.

  I know that some video cards require a number of amps on the 12 volt rail and all the information that I have found previously on the power of 600 watts power supply in the computer is not in that kind of detail.

  What I read, the power is a Petrus 600W e-star 5.0 Bronze, HP Part number 633186-002.

  Any additional details and details on this power to help me determine the next video card would be useful.

  On a side note the video card, I'm currently doing is one of the next Nvidia GTX 750 TI models, thoughts and recommendations on this specific map?

  Thank you

  JCOOPER2

  Hello

  Your PC has UEFI bios, so most video cards should work.  Some video cards will work in UEFI mode and others in legacy mode, that your PC is able to run.

  When the manufacturer of the video card and/or AMD or NVIDIA specify a minimum power supply size then it is best to stick to this recommendation.  Not all power supplies are built to the same standards of quality.  In addition the internal components, temperature, charges unknown and time that the PC will be placed under the maximum load are taken into account at the recommendation of minimum power supply is indicated.

  I have not seen a power of 500 watts with 12v rating of 18A, but this does not mean that there is not. And if that's the case, then the total power rating is suspect. A video card that requires an external auxiliary power connector will also draw power from the PCI-E slot.

  Are there cases where the minimum size of the power supply is insufficient? Yes, those who might be extreme but someone can have connected to power different connectors either to avoid buying a new power supply or maybe around just the food manufacturer minimum power rating. Some may do it thinking 'I'm going on fox the Fox ". It can work, but maybe the questions later start occurred.  I prefer to get the job done right the first time. You don't need a power supply to perhaps of overload and short circuit then internally causing spikes to the components in the PC.

• HP Envy Phoenix Deskto 810-160: HP Envy 3F6 Office Boot Error at power on

  I have a problem of problem with my desktop HP Envy Phoenix 810-160 to initialize.  1 TB HDD and SSD 16 GB.  Originally Windows 8 and put to update with 10 "free" Windows OS

  Back after a 13-day trip and got the hard drive error (3F0).  UEFI Diagnostics tests all passed several times.  After the passage of parameters of the BIOS back to default settings, error changed to 3F6.

  Whenever I start now, I almost immediately get the blue window Hard Drive Error (3F6). I hit F2 and go to the Diagnostics.  Ignore the coming out by... the computer starts - but very slowly.  Later works perfectly until I stopped him.  Takes a long minutes to finally stop (all lights out).  Computer is 30 months old.

  My 16GB SSD NO appears in Device Manager, but NOT in Solution Explorer.  In Windows 10 disk management, the SanDisk 16 GB SSD presents itself as shown in the red circle icon with an arrow pointing down, 14.9 GB, disk 2, unknown, uninitialized and 14.91 GB unallocated.  I thought it was supposed to be the startup disk 'rapid '.  I'm afraid to "initialize" this SSD lest I could format it and lose what is on it.

  Can you HELP me?  Don't you think that the SSD does not work as it should?  If it's the "Startup disk" How is that windows starts in all?  Uninstall physically the SSD drive would help?

  Thanks in advance, Bill

  Hi @dynaquest1,

  Thanks for the reply.

  Because the operating system is installed on the main hard drive and the PC works well. You can go ahead and install the player mSATA with no configuration is required.

  I hope this helps.

  Kind regards

• HP ENVY Phoenix PC 810 201ng: HP ENVY Phoenix PC close that it self or displays the blue screen

  I have this computer 4 days there, brand new and it has a few problems.

  The graphics card temperature goes up to 94 C.

  I had a few times the blue screen with these errors: IRQL_NOT_LESS_OR_EQUAL and SYSTEM THREAD EXPECTION NOT HANDLED.

  Computer, it overwrites oneself without showing any message and then turn it on again.

  I don't know what is happening. Someone please tell me what to do to solve this problem. Sometimes it freezes in firefox.

  SSD working on 65 c degreees.

  I have included the image here files: http://www44.zippyshare.com/v/HZvoTsN6/file.html

  I really need help here.

  You must send e-mail to Hp sales representative for your problem and return to store.

  See you soon

  Sophieestival

• HP ENVY Phoenix Desktop - 850: missing WLAN driver

  Hello

  I can't find the driver for the wireless network adapter.  It is not listed on the page for the driver for my model.

  HW PCI ID: PCI VEN_8086 & DEV_095A & SUBSYS_50108086 & REV_61

  Please answer with driver DL link.

  Thank you

  Dave

  

  

  For anyone interested, the website of intel has a tool, you can download and install to detect missing drivers they know! -A worked for me on the missing drivers!

  http://www.Intel.com/p/en_US/support/detect

• can I install an SSD on an optical drive in a HP Envy Phoenix

  I just bought a custom HP ENVY Phoenix Desktop - 810-350se CTO with a Raid 5 (3 x 2 TB) configuration, but I noticed and did some research it seems that it's better to have an SSD installed for faster computer access data, of course, I want to use for the operating system installed on it.  So I have two questions?

  (1.) I can change the configuration so that I can add a SSD on an optical drive? (This will be the 4th disc). Since I already use 3 HARD drive on a Raid 5 configuration and there is no more space on the left, I guess I can only use an empty space of optical drive and install a SSD?

  2.) is there a limitation on the number of readers and HARD disk can be installed on the motherboard?

  My proposed solution is to keep the 3 HARD drive and install a 4th disk (SSD) on the optical drive and use it to the operating system (Windows 8.1).

  Recommendations or suggestions is appreciated.

  Thank you.

  3rd generation Intel Core i7-4960 X processor

  •4 TB 7200 RPM SATA 6 G RAID Hard Drive

  Hello

  Your PC is already using a bootloader of Windows 8 and if you load the SSD in UEFI mode, then you will add an another boot loader of Windows 8 for the menu eligible boot device.  This will lead to confusion.  I suggest that you avoid this situation by trying the following procedure:

  1. Don't forget to create the external HP recovery media
  2. Install the SSD on port 1 or 2
  3. Disable startup secure in the BIOS and set the legacy mode
  4. Start the Intel OPROM and rebuild the matrix RAID 5
  5. Boot into the BIOS and UEFI mode
  6. Start the external HP recovery media and load the SSD drive (SSD recommended size is 240 GB or more)
  7. Once you are currently running and then go to disk management and upward and format the matrix RAID like TPG

  The above procedure may or may not work, but that's what I would first try.

• Phoenix 810 ENVY: ENVY Phoenix 810 with AMD Radeon R9 270 problem

  System:

  HP ENVY Phoenix PC 810

  Model 810-250se

  10 64-bit Windows

  Video:

  AMD Radeon R9 270

  My PC had a screen black/reboot during the ten days about problem. My son, who plays games on it, believes that the video card above is at the origin of the problem. There was a recent series of Windows included 10 updates a driver for this hardware, but after several attempts (including RESETS of Windows with a picture CD 10) installation via the update or directly from March 28 AMD download, the furthest I get is a black screen after trying to install the driver software. I did it with Windows Defender disabled. I tried Mode safe mode with and without networking, but the Crimson AMD software will not run here. I used the utility from dismantling of AMD as well.

  The problem earlier, before I start all the diagnostics, was a reboot loop.

  Having said all that, at a time given, I ran the HP BIOS utility that scans everything for chess... guess what, video memory FAILED:

  ID 0LM8HS-00082V-QFFV7F-Q2WM03 failure

  Is this an indication that the card is toast, or that the pilot and the chipset is just missing/messed up?

  Another symptom is a weird game of vertical strips on some graphic characteristics.

  So I guess my question is, where I go from here to get the PC up?

  Thank you

  Phil

  Hi @Tutescrew,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the video memory FAILURE. I'll be happy to help you.

  It is a hardware issue, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Sound does not work Windows 8 HP ENVY Phoenix 810 PC

  Original title: HP ENVY Phoenix PC 810

  I just put my new computer today and there is no sound. It does not appear to be pregnant anywhere on the screen. Are supposed to be? I also tried to plug the headphones into the top port of the Tower, and still there is no sound! Help, please. I paid a computer person to install this feature for me, now I'm worried, I'll have to return this machine and be the money that I paid for the help in setting this up.

  Hello

  Please contact Microsoft Community.

  Just a few questions first, to get a clear picture of the issue;

  1. Do you see a "Red X" mark on the volume icon in "Notification tray"?
  2. Did you make any changes after you set up your PC?

  This problem may occur if one or more are true.

  • Hardware failure.
  • Audio drivers are not installed or disabled.

  I suggest you follow the method below and check if it helps.

  Method 1: Convenience store;

  1. Press Windows Logo + 'W '.
  2. In "Find", type "Troubleshooting".
  3. On the left, click "Show all" and in the list, click on 'Hardware and devices' to run the troubleshooter.

  Important: After you run the troubleshooter, it is recommended to restart the computer to apply the changes.

  Note: After restarting, try to listen to music and check if the issue still persists. If audio does not work, you will be invited to an "error" or "error Code". I suggest you to make note and respond to us.

  Meet us with the required information, then we can help you further.

• HP ENVY Phoenix 850-065se: Intel Extreme Tuning Utlitiy

  Anyone who has used the Intel UERX to overclock their machine?  I'm a biy intrigued by what I see...

  I just bought two of the 850-065se PC.  When I run the UERX on one of them, I get more options than others.  For example, the 'Memory' option does not appear in the list on either of the computrs.  I checked BIOS settings repeatedly and they are identical.

  Any ideas?

  You can view the documentation on the HP ENVY Phoenix desktop PCs line - specifically in the "Change the Game" section under the "capacity of Overclocking...

  http://store.HP.com/us/en/PDP/sales-landing/HP-envy-Phoenix-desktop-PC-m0k57av-ABA-1?JumpID=Desktops_Finder_PDP

  FWIW, I reset the BIOS default and uninstalled/reinstalled Intel Extreme Tuning Utility and which fixed the issue.

• Intel Rapid Storage Technology driver update for HP ENVY Phoenix 810-135qe desktop

  Hello

  I recently bought a HP ENVY Phoenix 810-135qe desktop computer, during a performance of the construction in the auditor of updates to HP program that it is announcing the following update available for my machine and I was wondering if there were more details about what he actually did and/or updates/patches?

  Intel Rapid Storage Technology driver

  Description
  This package provides the driver for Intel Chipset SATA RAID solutions and SATA AHCI Controller in models supported that are running a supported operating system.

  Communicate details
  Exit the: 2014-01-23
  File name:sp65114.exe [1/1, 17.92 M]
  A Version12.8.2.1000 Rev.
  Compatibility:
  Microsoft Windows 7 (64-bit)

  Fix/development
  -Provides original drivers

  As you can see the description of correction and improvement really provided no details as to what is fixed or improved.

  If I need to apply this patch, it would be nice to understand a little better what to expect and what is fixed and/or improvements.  You have to forgive me because I'm old school and I usually generally follow the routine "if it ain't broke don't fix it".  I'll do what it takes well so I have a better understanding of what is going to happen in the case where updating mess something inadvertently.

  Thank you

  JCOOPER2

  Hello:

  What is the technology Intel Rapid Storage Technology software.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-020784.htm

  It is not necessary to install the update if you do not want.

  I doubt you will notice a difference in performance if you have it installed.

  It is unlikely that all the problems would result in the update (however could apply Murphy's law), but like you said... "If it ain't broke, don't fix it."

• HP Envy Phoenix 810 desktop: Hp Envy Phoenix start loop

  I have a new HP Envy Phoenix Office - 3 weeks. I had the boot loop after the first few days and there are still a few days. Both times, the computer has been re-set to factory conditions. In the meantime, I got the blue screen of death - which was resolved with the support on the website.  Reinstall all the programs is tedious - and tracking down licenses for anti-virus programs that I use etc.

  The latest HP support, stated that the HP updates have now the same as the windows updates - and activate updates. I disabled updates of HP but not windows.

  Support has been nice, but I'm worried that the computer is missing something.  It has a 250 GB SSD - 32 GB of Ram.  I have 3 years warranty at home.

  I asked the technician, if this seems to be a hardware or software problem. No response says.  I had a lot of HP products but never this experience.

  Thank you

  rinkles1

  @rinkles

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  
  Thank you for visiting the Forum from HP Support.

• HP Envy Phoenix 810-130qe: Beats Audio Control Panel is missing after upgrade to Windows 10 anniversary

  OK I need help with my HP Envy Phoenix 810-130qe desktop computer. My pc came with Windows Pro 8.1 and it had an audio panel where you can set the audio beats. When Windows 10 came out I've upgraded to Pro 10 Windows and my control panel audio beats was still on my pc and worked very well. Then, when Windows 10 anniversary came out August 2 my pc automatically updated for the anniversary edition. Everything was normal, but my control panel audio beats had disappeared and I was able to find it anywhere. Do anyone knows how I can get it back or if there is no driver I can download to get it.

  Hello:

  If the W8.1 driver does not work, this W10 IDT audio driver should restore function Audio Beats.

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe