Windows 7 RTM - lsass.exe error causes Windows reboot

Similar Questions

• Directory services cannot start SBS2003 lsass.exe error?

  Hi all

  I have a SBS 2003 server who gave a customer who seems not to start windows.
  It gives 0xc000007a error code (Directory Services cannot start because the specified procedure could not be found).
  After finally the local Windows password reset, I am now faced with another problem, how to solve the problem I have for the first time to the difficulty.

  I've done some commands listed on the Microsoft article http://support.microsoft.com/kb/258062, nothing helped.

  I've already run the disk check, but it is impossible to run a repair on the installation because it shows the same error

  Does anyone know how to get the server to start successfully, without the need to reinstall Windows?

  System Spec: -.
  2 x Intel Xeon processors
  4 GB of DDR2 memory
  company 3x250GB WD HDD (Raid 5 with parity)
  Quantum Ultrium 2 tape drive

  Hello

  Thanks for your quick response to my post. I recently decided to reinstall the OS due to time constraints,

  Thank you

• CVTRES.exe errors causing applicatzion

  Causing CVTRES.exe of applicatzion errors. Music also stop and start in quick succession.

  File of MS or a virus problem?

  First read this:

  http://support.Microsoft.com/kb/230332

  Then this:

  http://www.AuditMyPC.com/CVTRES.asp

  Then, run your anti-virus and anti-malware business.

  Here are a few more readings for you:

  http://www.google.com/search?hl=en&q=cvtres.exe+.

  Not a simple answer unless you are a PC geek...

  See you soon,.

  Jerry

• Computer hangs and get the DellDock.exe error is preventing reboot

  Hello world

  I use a Dell XPS M1330 laptop, 4 GB of Ram, 320 HARD drive, processor 2, 2MbL2 Cache.

  The problem is it blocks every time and some a few times it hangs on reboot. After a lil research I understood and received a message that DellDock.exe prevents restart. While, it just hangs, nothing works, his blocking type. Nobody knows what's the problem.

  Please help with some advice. My laptop has become a junk. And I'm losing confidence on Dell and Windows.

  Dinkar Reddy

  Have you tried Dell's Support?
  http://support.Dell.com/

  Delldock uninstalling and reinstalling will work?
  http://www.DellDock.com/

  t-4-2

• Lsass.exe in Windows safe mode system error.

  Lsass.exe in Windows safe mode system error.  I tried to repair and recovery of Windows and he persists?  Any ideas on how to solve this problem?

  Most of lsass.exe errors, if this is the result of malware, is the result of a corrupted registry, specifically in the security hive.

  Follow the steps described here.

  You can also try running chkdsk & an System File Checker analysis if the registry repair does not resolve the issue.

  See you soon

• Vista Home Premium lsasse.exe/o HIGH - non-stop

  This isn't a problem of malware/sasser.

  The question I have is cited in hundreds of threads back on the history of Vista, and nowhere can I find an answer.  I don't work for small business tech and try to avoid VISTA, but sometimes I can't - what is a.

  The specific platform is an IBM Thinkpad T61 with the original OEM Windows Vista Home Premium x 86.
  I removed the bloatware and system carefully cleaned up everything, need updated drivers and VISTA is up-to-date.
  One question remains, which is a rampant lsasse.exe that accumulate i/o reads and writes to the rhythm of 3 ticks/s before shutdown or restart (or sleep).
  It is not uncommon to see a 50 000 or more, I / S for lsass.exe in work a short day of.
  I posted this problem in some of the best forums on the web, with no good response - in fact, it seems the more 'expert' mods and members are, the faster they run away from the issue.  What is the 'dark secret' or something that the mere mention marks one as radioactive?
  Should I perhaps remove/replace the program/windows/system32/lsass by a later version of Windows 7?  I noticed on my thinkpad running windows 7 Home premium the accumulated I / O for lsass.exe in everyday use is trivial - less than 10%, the number of Vista system will run even when it is idle.
  Please notify.

  Hello

  I suggest you to try the suggestion mentioned in the link below and check if it helps:

  A problem of leak memory in the Lsass.exe process causes an application or a service stops responding if the application or service using NTLM authentication on a computer that is running Windows

  http://support.Microsoft.com/kb/971265

  You can also post your query on TechNet forum to get help:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Error: wininit lsass.exe windows server restart, event ID: 1000, 1001, 1015, 6005, 6006

  Hi everyone, I recently joined in a Banking Corporation as a leader of IT below support that I explained about an error that is impossible to fix.

  This company is running windows server 2008 r2 standard 64 bit OS sp1.

  HP proliant DL380 G7 intel xeon
  system processor: intel xeon E5620

  This company is facing this problem since April 2014 to cultivate the date, but the question not yet fixed because there is no COMPUTER administrator in this endeavour to maintain this server. So, in this company, I'm the only guy with COMPUTER knowledge and my management was waiting for me to fix this error and to run the server without any problem.

  The last few months I've corrected several server issues related in this society as windows update, windows daily backup, SQL server backup, user permissions, disk space low and network troubleshooting and equipment computer issues etc...,

  But come to this lsass.exe I am unable to solve this problem I tried many ways to research online, but not yet fixed. Below you will find the details.

  *) fix for windows server 2008 R2 Standard sp1

  After the failed to install installation
  Fix for Windows (KB2545850)

  *) Tried to use the system tool
  But failed to solve problem

  *) I tried this command at the command prompt
  sfc/scannow
  result
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  *) I also tried to change the registry of one of the web links of dell values, but there is no change at all.
  http://www.Dell.com/support/article/us/en/19/SLN291309/en

  *) I thought installing the fix and some other updates in safe mode only to try my luck, but when I tired to start the server in safe mode it takes a long time to start in it. But, I'll try again if this issue is going to fix through safe mode then please advise me on this.

  So to come back to this question, at the time of the restart, a small window will pop up as below.
  Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  *) I tried this in shutdown command prompt cmd - to stop this judgment but does not any.

  *) I've tried many ways to solve this problem, but none of them worked for me even I tried to upgrade from sp1 to sp2 but could not do so for the following reason:
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  After downloading the software from the link above and when I tried to install error appear below.
  This service pack does not apply to the version of windows running on this computer.

  It is the only question that is impossible to fix. So, I need expert help to resolve this issue as soon as POSSIBLE.

  Note: I can not reinstall the operating system on this server because it runs many applications on the SQL 2008 database and also it is already configured with many services and I don't really know how many applications do I need to take a backup and how to configure manually. so if I reinstall OS and if I'm bored configurations or settings and then it will be difficult for employees who work on these applications. So I don't want to take the risk of doing as I said I am new to this company.

  Additional information: this sever when ever it will pop up as server will restart in one minute then it restarts to 3 times without any gap, then after an interval extended from 3 to 4 hours, then it will follow even as I said above. To understand better, I'll give you this good example: If the server restart to 09:00, then 2nd reboot will be at 09:02 and the 3rd reboot will be at 09:04 and then after 3 to 4 hours apart, as about 13:00 it restarts again for 3 times vice versa.

  Even I understand that I have to reinstall the OS to fix this stupid problem which is like a nightmare for me, but right now, I can't. So, please help me to solve this problem without reinstallation of server operating system.

  I expect the best answer to my question that will solve my problem without any problem to this server.

  Below the five examples are the main reason for my server restart. If you need anything that either more information please advice me I will answer according to your instructions.
  Event ID 1000
  Event ID 1001
  Event ID 1015
  Event ID 6005
  Event ID 6006

  Below, I have collected more information of the observer of events and even from now this server restarts again due to this error, I don't know what to do...!

  1st error:

  -System
  -Supplier
  [Name]  Application error
  -Event ID 1000
  [Qualification] 0
  Level 2
  Working 100
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479745
  Application of channel
  Security
  -EventData
  Lsass.exe
  6.1.7601.18443
  5348920c
  ntdll.dll
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  220
  01d16482b15bac9c
  C:\Windows\system32\lsass.exe
  C:\Windows\SYSTEM32\ntdll.dll
  5518c7e0-d091-11e5-88FE-68b5996a1808

  1 details of the error:

  The failing application name: lsass.exe, version: 6.1.7601.18443, time stamp: 0x5348920c
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000374
  Offset: 0x00000000000c4102
  ID of the process failed: 0 x 220
  Start time of application vulnerabilities: 0x01d16482b15bac9c
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  2nd error:

  -System
  -Supplier
  [Name]  Windows error reporting
  -EventID 1001
  [Qualification] 0
  Level 4
  Task 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479746
  Application of channel
  Security
  -EventData
  0
  APPCRASH
  Not available
  0
  Lsass.exe
  6.1.7601.18443
  5348920c
  StackHash_802c
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  0
  5518c7e0-d091-11e5-88FE-68b5996a1808
  4

  2 details of the error:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: lsass.exe
  P2: 6.1.7601.18443
  P3: 5348920c
  P4: StackHash_802c
  P5: 6.1.7601.18247
  P6: 521eaf24
  P7: c0000374
  P8: 00000000000c 4102
  P9:
  P10:
  Attached files:
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  3rd error:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Wininit
  [Guid]  {206f6dea-d3c5-4d10-bc72-989f03c8b84b}
  [EventSourceName]  Wininit
  -EventID 1015
  [Qualification] 49152
  Version 0
  Level 2
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479747
  Correlation
  -Execution
  [Pr

  ocessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  C:\Windows\system32\lsass.exe
  255

  3 details of the error:

  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  error 4:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6005
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 35:43.000000000Z
  EventRecordID 479787
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  CreateSession
  00000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000000
  In bytes
  0000: 00 00 00 00...

  4 details of the error:
  Winlogon notification subscriber takes a long time to handle the notification event (CreateSession).

  error 5:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6006
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 36:39.000000000Z
  EventRecordID 479792
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  116
  CreateSession
  04000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000004
  In bytes
  0000: 04 00 00 00...

  Details of the error 5:
  Winlogon notification subscriber was 116 second (s) to handle the notification event (CreateSession).

  Thanks forward,

  SAI

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Equium A60 - error caused by the RAM problem - Windows tool does not work!

  Hi all

  When closing my laptop, I got the blue "screen of death" and it restarts, windows came with this analysis of the accident: "error caused by the memory problem to live: run the Windows tool". I downloaded diagnostic tool (mstinst.exe), he opened so I got "windiag.iso" and he burned on a CD like they told me (the use of 'Record Now') and then I put in the CD drive and rebooted my computer. But it did not launch the tool! Does anyone know why it went wrong and how can I make it work? Even if I got the tool to work, I would be able to solve the problems of RAM anyway, just taking my laptop to a repair center?

  Thanks :)

  Hello

  I put t know if you have seen this page http://oca.microsoft.com/en/windiag.asp but there you can find a detailed explanation of how to use the Windows Memory Diagnostic tool.

  Good luck!

• Ehshell.exe error with Windows XP Media Center Edition Version 2002, service pack 3

  Running Windows XP Media Center Edition Version 2002 with service pack 3.  I get the ehshell.exe error when I try to watch live TV.  It crashes, debug and I usually won't have to ctrl-alt-del to get anywhere.  Do not seem to have this problem before I added various updates etc, tv was fine before this date.

  I'm not particularly computer so nice easy steps please...!

  Thank you, Nicholas

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  1. • 1

       Click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "system restore."

     • 2

       Click 'Next' in the window system restore for a list of points of restoration which has been archived.

     • 3

       Select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

     • 4

       Click 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• What is werfault.exe error? How to solve window 8?

  Separated from this thread.

  Original title: what is werfault.exe error? How to solve window 8? its bad thing for windows 8? / Please solve it quickly

  What is werfault.exe error? How to solve window 8? its bad thing for the user to window 8?

  Hello

  I will help you certainly with the same. However, we need a few details to better understand the cause of the problem.

  1. Once you get this error message?

  2 did you recently do changes on your computer, before the show?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access Windows here error report settings:

  1. press Windows + X, choose Panel.

  2. choose system and Maintenance , go to Problem Reports and Solutions.

  3. Select change settings , and then choose avancΘs.

  4 try to disable it temporarily and see if this will fix the issue.

  As a temporary solution you can disable the error reporting service:

  (a) Press Win + R, type services.msc and press ENTER.

  (b) find Windows Error Reporting service in the services list.

  (c) make a right click on it, and then click Properties.

  (d) open the "Startup Type" list and select "Disabled" press OK.

  Then check and see if you still get the error werfault.exe on opening the programs.

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• AccelerometerSt.exe error on the computer Windows 10 brand new

  I have the same problem that many others have with the Application AccelerometerSt.exe error.   BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it.  I have the HP Envy x 360.   How do you intend that to solve the problem.   If you uninstall and reinstall Windows 10, I'll need much more detailed information.   I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer