LUN access is the only host

Hello

I have 3 Dell MD3000i iSCSI connected server blade, the three guests can see/access the same logical unit number but when I create a virtual machine under its unique host access by saying is that correct?

This is probably because you are connected directly to the ESX host. Because the hosts are not managed by vCenter (or if they are, you are not connected to it) your host thinks it's the only host touch this LUN. Looking at this capture, screen, I would say that it is correct.

Kyle

Tags: VMware

Similar Questions

My utility account shows no Keychain Access. The only file in the public services is citrix online. How can I find my files utility?

My utility account shows no Keychain Access. The only file in the public services is citrix online. How can I find my files utility?

Omegamax,

Have you tried spotlight?

Grant Web access to the only vm on the esx host

I have read the Administrator's guide and spent a few hours online on this subject and other types of users doing the same thing...
I have 2.5 VC and ESX 3.5 by running very well. I want to give web access to a virtual machine #1 running on ESX #1 host in this species, using the URL for the console "generate".
I went VC and granted permission to the user of the Virtual Machine to the particular user I want to access the virtual machine. I granted this permission to the esx host and the virtual machine. When the user attempts to connect (this is a domain account) they get the connection failed due to bad user name or password. It seems that the only account that can connect to web access is the root on this esx host account. I am at a loss here, because I also tried to set this user as an administrator and so on. The only account that can connect to web access, is that the account root localhost.
What I'm missing here?

The user attempts to access Web Access to the ESX Server? Which is what I think they do because without a third party tool they will be able to authenticate users who are in the service console, including the roots. If they try to access Web App of VC by pointing a browser VC while they should AD credentials to access their virtual computer.

Another thing to remember is that permissions in VC only apply when you log in to VC

If you find this or any other answer useful please consider awarding points marking the answer correct or useful

guest computer must have access to the printer host cannot use

I have a new Mac, an old Mac, an old Windows machine and printer of Xante AW1200.
Almost all of my work is done on the new Mac. I get the old machine Mac or Windows of the drawer on rare occasions, or when I need to print something, because the new Mac cannot use the printer. (Xante never taken the trouble to develop an OS X 10.6.4 driver for this printer.)
I would like to get rid of the Windows machine. I have it successfully migrated to a machine of comments on the new Mac, using vmware Fusion 3.1.3 but I have not found a way to get the computer to see the printer.
This isn't a complete surprise, as Xante does not provide a driver for their (former) printer and (my new host) operating system OS X 10.6.4 - but they were planning a WIndows XP driver that has always worked well on the Windows machine, connected by the RS232 port.
The printer also works very well on my old Mac, connected via ethernet.
Can I connect the printer to the new Mac's ethernet port. Of course, the Mac cannot work with it. But could the guest computer use Windows sound driver to manage the printer?
None of the four standard ways of printing seem applicable: ThinPrint because the host cannot use the printer. USB because the printer is not a USB connector. network / wireless because I do not have my old Mac running all the time. Hello because I think that it requires that the host can see the printer.
It certainly isn't a frequently asked Question. Sorry, my situation is so unusual. But the printer is special enough for the work that I do. Any tips?
Thank you.

If you have a router on your site then you should be able to connect the printer to the router, configure it as needed, and then accessing it in the comments as a network printer. Note: The guest network should be configured as connected by a bridge to access in this way.

Another option of network which is doable, but a little more difficult to set up, is to fix the printer directly on the Mac with a standard CAT5 Ethernet cable, not a Crossover as suggested in the Ethernet Port of Mac being automatic detection User Guide. You would then manually configure the IP address, etc. on the printer and network bridged on the comments and even if Bridged his only access to the printer on this network adapter. Then use a second network in the guest configured as NAT, if you do not also use Bridged on that, to enable the client to have access to other resources on the physical LAN to the host, such as Internet access, etc..

Vpn client access to the DMZ host

I'm having a problem where my customers who establish a VPN with Pix 515 cannot access hosts on the DMZ. VPN clients can access hosts inside network without any problems. I discovered that when I make a route to trace from a client computer that has established a VPN connection to a host on the DMZ, he tries to go through the default gateway of computers instead of the client from cisco. Any ideas?

More information:

When a client connects with the PIX over the VPN, it is given the internal DNS servers and the DNS Server internal, we have a host entry that says "www.whatever.com" 2.2.2.2 (this is the DMZ host). Customers within the network can access this host with problems, it's just the customers who establish a VPN connection. But the VPN Clients can access "www.whatever.com" using the public ip address. The problem is that if remove us the entry from the host on the DNS server so that the name of "www.whatever.com" decides the public ip address customers inside will not be able to access the DMZ host. The names and IP numbers are not real just using those as an example.

Any help would be apperciated. Thank you

You'll currently have something like this in your config file:

sheep allowed ip access-list

NAT (inside) 0 access-list sheep

This tells the PIX not to NAT any traffic from inside interface, which is to go to a VPN client. You need the same thing but for the DMZ interface, then add the following:

sheep allowed ip access-list

NAT 0 access-list sheep (dmz)

Who should you get.

Allocate multiple cores of the only host for CPU on a virtual machine

Hello
You don't know if it is possible, but could find is not online.
An application on my virtual machine uses only a carrot and I want to accelerate.
Add more cores on this virtual machine is meaningless, to that effect, I would like to allocate multiple cores of the host that will act as a single core on the virtual machine.
Is this possible?
Thank you
Herman

As already stated above, this is not possible, and you have two options:

1 buy a new CPU with a clock higher;

2. that your application works with multiple processors.

Second vSwitch on the only host of 5.1 ESXi

For some reason any crazy it is escaping me. My apologies in advance.
I have a single host 5.1 in a laboratory. Not connected to a vcenter. Is it possible to create a second vSwitch? The reasons aka 'WHY' is not serious in this case, it can be done and how questions.
I can't find a way to do it.
Thank you

You can create as many vSwitches as you want (the maximum supported). The host selected in the inventory, click 'Configuration'-> 'Networking'-> 'add network... '. ».

André

Access to the administration via VPN to 887 after config setup pro

Hi all

Ive just made a three 887w for a client in a few branches, and as this is the first time I have deployed these devices, I decided to go with the GUI (downloaded config pro 2.3) to get the configuration made that I had some constraints of time to get them in place (sometimes I go with the graphical interface first and then look back at the CLI to see what as its been) (, then hand it in Notepad to get a better understanding of the new features of the CLI may be gone and allowed).

One thing I again, that I was going to do face was my first experience of the firewall IOS area type of config...

At this point, I'm still unclear on the config (where why Im posting here I guess!) - but the main problem I have at the moment is with managing access to devices.

Particularly with regard to access to the administration of headquarters inside the IP address of the branch routers.

I should mention that the branch routers are connected to Headquarters by connections IPSec site-to-site VPN and these connections are all very good, all connectivity (PC server, PC, printer, etc.) is very well... I can also send packets (using the inside of the interface as a source) ping from branch routers to servers on the headquarters LAN.

Set up access to administration using config pro to allow access to the router on the subnet headquarters (on its inside interface), as well as the local subnet and also SSH access to a specific host from the internet - the local subnet and the only host on the internet can access the router very well.

I'm not sure if the problem is with the ZBF config or if its something really obvious Im missing! -Ive done routers branch several times previously, so with this being the first config ZBF I did, so I came to the conclusion that there must be something in the absence of my understanding.

Any help greatly appreciated... sanitized config below!

Thanks in advance

Paul

version 15.1
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
hostname name-model
!
boot-start-marker
boot-end-marker
!
logging buffered 51200
recording console critical
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxx
!
No aaa new-model
!
iomem 10 memory size
clock timezone PCTime 0
PCTime of summer time clock day March 30, 2003 01:00 October 26, 2003 02:00
Service-module wlan-ap 0 autonomous bootimage
!
Crypto pki trustpoint TP-self-signed-2874941309
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2874941309
revocation checking no
rsakeypair TP-self-signed-2874941309
!
!
TP-self-signed-2874941309 crypto pki certificate chain
certificate self-signed 01

no ip source route
!
!
DHCP excluded-address IP 10.0.0.1 10.0.0.63
DHCP excluded-address IP 10.0.0.193 10.0.0.254
!
DHCP IP CCP-pool
import all
Network 10.0.0.0 255.255.255.0
default router 10.0.0.1
xxxxxxxxx.com domain name
Server DNS 192.168.xx.20 194.74.xx.68
Rental 2 0
!
!
IP cef
no ip bootp Server
IP domain name xxxxxxx.com
name of the server IP 192.168.XX.20
name of the server IP 194.74.XX.68
No ipv6 cef
!
!
Authenticated MultiLink bundle-name Panel

parameter-card type urlfpolicy websense cpwebpara0
Server 192.168.xx.25
source-interface Vlan1
allow mode on
parameter-card type urlf-glob cpaddbnwlocparapermit0
model citrix.xxxxxxxxxxxx.com

license udi pid xxxxxxxxxxx sn CISCO887MW-GN-E-K9
!
!
username xxxxxxx privilege 15 secret 5 xxxxxxxxxxxxxxxxxxxxx
username privilege 15 secret 5 xxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx
!
!
!
!
synwait-time of tcp IP 10
!
type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-1
game group-access 106
type of class-card inspect entire game SDM_SHELL
match the name of group-access SDM_SHELL
type of class-card inspect entire game SDM_SSH
match the name of group-access SDM_SSH
type of class-card inspect entire game SDM_HTTPS
match the name of group-access SDM_HTTPS
type of class-card inspect all match sdm-mgmt-cls-0
corresponds to the SDM_SHELL class-map
corresponds to the SDM_SSH class-map
corresponds to the SDM_HTTPS class-map
type of class-card inspect entire game SDM_AH
match the name of group-access SDM_AH
type of class-card inspect entire game SDM_ESP
match the name of group-access SDM_ESP
type of class-card inspect entire game SDM_VPN_TRAFFIC
match Protocol isakmp
match Protocol ipsec-msft
corresponds to the SDM_AH class-map
corresponds to the SDM_ESP class-map
type of class-card inspect the correspondence SDM_VPN_PT
game group-access 105
corresponds to the SDM_VPN_TRAFFIC class-map
type of class-card inspect entire game PAC-cls-insp-traffic
match Protocol cuseeme
dns protocol game
ftp protocol game
h323 Protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
inspect the class-map match PAC-insp-traffic type
corresponds to the class-map PAC-cls-insp-traffic
type of class-map urlfilter match - all cpaddbnwlocclasspermit0
Server-domain urlf-glob cpaddbnwlocparapermit0 match
type of class-card inspect entire game PAC-cls-icmp-access
match icmp Protocol
tcp protocol match
udp Protocol game
class-map type urlfilter websense match - all cpwebclass0
match any response from the server
type of class-card inspect correspondence ccp-invalid-src
game group-access 100
type of class-card inspect correspondence ccp-icmp-access
corresponds to the class-ccp-cls-icmp-access card
type of class-card inspect sdm-mgmt-cls-ccp-permit-0 correspondence
corresponds to the class-map sdm-mgmt-cls-0
game group-access 103
type of class-card inspect correspondence ccp-Protocol-http
http protocol game
!
!
type of policy-card inspect PCB-permits-icmpreply
class type inspect PCB-icmp-access
inspect
class class by default
Pass
type of policy-card inspect sdm-pol-VPNOutsideToInside-1
class type inspect sdm-cls-VPNOutsideToInside-1
inspect
class class by default
drop
type of policy-card inspect urlfilter cppolicymap-1
urlfpolicy websense cpwebpara0 type parameter
class type urlfilter cpaddbnwlocclasspermit0
allow
Journal
class type urlfilter websense cpwebclass0
Server-specified-action
Journal
type of policy-map inspect PCB - inspect
class type inspect PCB-invalid-src
Drop newspaper
class type inspect PCB-Protocol-http
inspect
service-policy urlfilter cppolicymap-1
class type inspect PCB-insp-traffic
inspect
class class by default
drop
type of policy-card inspect PCB-enabled
class type inspect SDM_VPN_PT
Pass
class type inspect sdm-mgmt-cls-ccp-permit-0
inspect
class class by default
drop
!
security of the area outside the area
safety zone-to-zone
zone-pair security PAC-zp-self-out source destination outside zone auto
type of service-strategy inspect PCB-permits-icmpreply
zone-pair security PAC-zp-in-out source in the area of destination outside the area
type of service-strategy inspect PCB - inspect
source of PAC-zp-out-auto security area outside zone destination auto pair
type of service-strategy inspect PCB-enabled
sdm-zp-VPNOutsideToInside-1 zone-pair security source outside the area of destination in the area
type of service-strategy inspect sdm-pol-VPNOutsideToInside-1
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key address 194.105.xxx.xxx xxxxxxxxxxxx
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to194.105.xxx.xxx
the value of 194.105.xxx.xxx peer
game of transformation-ESP-3DES-SHA
match address VPN - ACL
!
!
!
!
!
interface BRI0
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
ATM0 interface
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
No atm ilmi-keepalive
!
point-to-point interface ATM0.1
Description $ES_WAN$
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
PVC 0/38
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
wlan-ap0 interface
description of the Service interface module to manage the embedded AP
IP unnumbered Vlan1
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
ARP timeout 0
!
interface GigabitEthernet0 Wlan
Description interface connecting to the AP the switch embedded internal
!
interface Vlan1
Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$
the IP 10.0.0.1 255.255.255.0
IP access-group 104 to
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
IP nat inside
IP virtual-reassembly
Security members in the box area
IP tcp adjust-mss 1452
!
interface Dialer0
Description $FW_OUTSIDE$
IP address 81.142.xxx.xxx 255.255.xxx.xxx
IP access-group 101 in
no ip redirection
no ip unreachable
no ip proxy-arp
penetration of the IP stream
NAT outside IP
IP virtual-reassembly
outside the area of security of Member's area
encapsulation ppp
Dialer pool 1
Dialer-Group 1
Authentication callin PPP chap Protocol
PPP chap hostname xxxxxxxxxxxxxxxx
PPP chap password 7 xxxxxxxxxxxxxxxxx
No cdp enable
map SDM_CMAP_1 crypto
!
IP forward-Protocol ND
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source overload map route SDM_RMAP_1 interface Dialer0
IP route 0.0.0.0 0.0.0.0 Dialer0
!
SDM_AH extended IP access list
Note the category CCP_ACL = 1
allow a whole ahp
SDM_ESP extended IP access list
Note the category CCP_ACL = 1
allow an esp
SDM_HTTP extended IP access list
Note the category CCP_ACL = 0
permit tcp any any eq www
SDM_HTTPS extended IP access list
Note the category CCP_ACL = 0
permit any any eq 443 tcp
SDM_SHELL extended IP access list
Note the category CCP_ACL = 0
permit tcp any any eq cmd
SDM_SNMP extended IP access list
Note the category CCP_ACL = 0
allow udp any any eq snmp
SDM_SSH extended IP access list
Note the category CCP_ACL = 0
permit tcp any any eq 22
SDM_TELNET extended IP access list
Note the category CCP_ACL = 0
permit tcp any any eq telnet
scope of access to IP-VPN-ACL list
Note ACLs to identify a valuable traffic to bring up the VPN tunnel
Note the category CCP_ACL = 4
Licensing ip 10.0.0.0 0.0.0.255 192.168.xx.0 0.0.0.255
Licensing ip 10.0.0.0 0.0.0.255 10.128.xx.0 0.0.255.255
Licensing ip 10.0.0.0 0.0.0.255 160.69.xx.0 0.0.255.255
!
recording of debug trap
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 10.0.0.0 0.0.0.255
access-list 23 allow 193.195.xxx.xxx
Note access-list 23 category CCP_ACL = 17
access-list 23 permit 192.168.xx.0 0.0.0.255
access-list 23 allow 10.0.0.0 0.0.0.255
Access-list 100 category CCP_ACL = 128 note
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip 81.142.xxx.xxx 0.0.0.7 everything
Access-list 101 remark self-generated by SDM management access feature
Note access-list 101 category CCP_ACL = 1
access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq 22
access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq 443
access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq cmd
access-list 101 tcp refuse any host 81.142.xxx.xxx eq telnet
access-list 101 tcp refuse any host 81.142.xxx.xxx eq 22
access-list 101 tcp refuse any host 81.142.xxx.xxx eq www
access-list 101 tcp refuse any host 81.142.xxx.xxx eq 443
access-list 101 tcp refuse any host 81.142.xxx.xxx eq cmd
access-list 101 deny udp any host 81.142.xxx.xxx eq snmp
access-list 101 permit ip 160.69.0.0 0.0.255.255 10.0.0.0 0.0.0.255
access-list 101 permit ip 10.128.0.0 0.0.255.255 10.0.0.0 0.0.0.255
access-list 101 permit ip 192.168.xx.0 0.0.0.255 10.0.0.0 0.0.0.255
access-list 101 permit udp host 194.105.xxx.xxx host 81.142.xxx.xxx eq non500-isakmp
access-list 101 permit udp host 194.105.xxx.xxx host 81.142.xxx.xxx eq isakmp
access-list 101 permit host 194.105.xxx.xxx host 81.142.xxx.xxx esp
access-list 101 permit ahp host 194.105.xxx.xxx host 81.142.xxx.xxx
access list 101 ip allow a whole
Note access-list 102 CCP_ACL category = 1
access-list 102 permit ip 192.168.xx.0 0.0.0.255 everything
access-list 102 permit ip host 193.195.xxx.xxx all
access-list 102 permit ip 10.0.0.0 0.0.0.255 any
Note access-list 103 self-generated by SDM management access feature
Note access-list 103 CCP_ACL category = 1
access-list 103 allow ip host 193.195.xxx.xxx host 81.142.xxx.xxx
Note access-list 104 self-generated by SDM management access feature
Note access-list 104 CCP_ACL category = 1
access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq telnet
access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq telnet
access-list 104 permit tcp 192.168.xx.0 0.0.0.255 eq on host 10.0.0.1 22
access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq 22
access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq www
access-list 104 permit tcp 10.0.0.0 0.0.0.255 eq to host 10.0.0.1 www
access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq 443
access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq 443
access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq cmd
access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq cmd
access-list 104 tcp refuse any host 10.0.0.1 eq telnet
access-list 104 tcp refuse any host 10.0.0.1 eq 22
access-list 104 tcp refuse any host 10.0.0.1 eq www
access-list 104 tcp refuse any host 10.0.0.1 eq 443
access-list 104 tcp refuse any host 10.0.0.1 eq cmd
access-list 104 deny udp any host 10.0.0.1 eq snmp
104 ip access list allow a whole
Note access-list 105 CCP_ACL category = 128
access-list 105 permit ip host 194.105.xxx.xxx all
Note access-list 106 CCP_ACL category = 0
access-list 106 allow ip 192.168.xx.0 0.0.0.255 10.0.0.0 0.0.0.255
access-list 106 allow ip 10.128.0.0 0.0.255.255 10.0.0.0 0.0.0.255
access-list 106 allow ip 160.69.0.0 0.0.255.255 10.0.0.0 0.0.0.255
Note category from the list of access-107 = 2 CCP_ACL
access-list 107 deny ip 10.0.0.0 0.0.0.255 160.69.0.0 0.0.255.255
access-list 107 deny ip 10.0.0.0 0.0.0.255 10.128.0.0 0.0.255.255
access-list 107 deny ip 10.0.0.0 0.0.0.255 192.168.xx.0 0.0.0.255
access-list 107 allow ip 10.0.0.0 0.0.0.255 any
Dialer-list 1 ip protocol allow
not run cdp

!
!
!
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 107
!
!
control plan
!
!
Line con 0
local connection
no activation of the modem
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
line vty 0 4
access-class 102 in
privilege level 15
local connection
transport input telnet ssh
!
Scheduler allocate 4000 1000
Scheduler interval 500
NTP-Calendar Update
130.159.196.118 source Dialer0 preferred NTP server
end

Hi Paul,.

Here is the relevant configuration:

type of policy-card inspect PCB-enabled

class type inspect sdm-mgmt-cls-ccp-permit-0
inspect

type of class-card inspect sdm-mgmt-cls-ccp-permit-0 correspondence
corresponds to the class-map sdm-mgmt-cls-0
game group-access 103

type of class-card inspect all match sdm-mgmt-cls-0
corresponds to the SDM_SHELL class-map
corresponds to the SDM_SSH class-map
corresponds to the SDM_HTTPS class-map

type of class-card inspect entire game SDM_SHELL
match the name of group-access SDM_SHELL
type of class-card inspect entire game SDM_SSH
match the name of group-access SDM_SSH
type of class-card inspect entire game SDM_HTTPS
match the name of group-access SDM_HTTPS

SDM_SHELL extended IP access list
Note the category CCP_ACL = 0
permit tcp any any eq cmd
SDM_SSH extended IP access list
Note the category CCP_ACL = 0
permit tcp any any eq 22
SDM_HTTPS extended IP access list
Note the category CCP_ACL = 0
permit any any eq 443 tcp

Note access-list 103 self-generated by SDM management access feature
Note access-list 103 CCP_ACL category = 1
access-list 103 allow ip host 193.195.xxx.xxx host 81.142.xxx.xxx

The above configuration will allow you to access the router on the 81.142.xxx.xxx the IP address of the host 193.195.xxx.xxx using HTTPS/SSH/SHELL. To allow network 192.168.16.0/24 access to the router's IP 10.0.0.1, add another entry to the access list 103 as below:

access-list 103 allow ip 192.168.16.0 0.0.0.255 host 10.0.0.1

This should take enable access to this IP address for hosts using ssh and https. Try this out and let me know how it goes.

Thank you and best regards,

Assia

Impossible to download on the ftp host. errors on .htaccess file download

Passage to the download of a site using Fetch for using the Upload muse to secure FTP tool. Secure FTP settings are OK. I have access to the end host FTP server.
Muse-error with the message error download file .htaccess file. Error 553. Try again.
Yahoo is the host. They accept only Secure FTP. All my settings are the same as Dreamweaver says what is good.
I managed with Fetch for a long time.
"Try again later" has failed. Help please, thank you

Please see this thread Re: FTP transfer failed: error 553>.

Unable to access the remote host

Here is the configuration of pix of my client, the problem, here is... whenever it uses a Cisco VPN dialier, it can connect to the VPN, but cannot access any host on the distance, but with the same vpn Dialer & VPN pcf file, when it is used with a connection high speed which is not route with this PIX (or not behind the PIX) It works very well. Yet one thing I noticed, it's only when I give a static NAT, it is able to access on the remote & not through a NAT GLOBAL PC when the PC is behind the PIX.

6.3 (3) version PIX

interface ethernet0 car

Auto interface ethernet1

Auto interface ethernet2

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

nameif dmz security50 ethernet2

enable encrypted password xxx

enable encrypted password xxx

TA.qizy4R//ChqQH encrypted passwd

fixup protocol dns-maximum length 1024

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol pptp 1723

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

No fixup protocol sip udp 5060

fixup protocol 2000 skinny

No fixup not protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

access ip-list 110 permit a whole

access-list 120 allow icmp a whole

access-list 120 allow esp a whole

logging console warnings

Monitor logging warnings

logging buffered stored notifications

recording of debug trap

the logging queue 0

Outside 1500 MTU

Within 1500 MTU

MTU 1500 dmz

IP address outside x.x.x.x 255.255.255.240

IP address inside 192.168.0.1 255.255.0.0

no ip address address dmz

alarm action IP verification of information

alarm action attack IP audit

IP local pool homeuser_vpn 192.168.1.1 - 192.168.1.254

location of PDM 192.168.0.80 255.255.255.255 inside

location of PDM 192.168.0.207 255.255.255.255 inside

location of PDM 0.0.0.0 0.0.0.0 outdoors

forest warnings of PDM 100

history of PDM activate

ARP timeout 14400

Global 1 x.x.x.66 (outside)

NAT (inside) 0-list of access 123nonat

NAT (inside) 1 192.168.0.0 255.255.0.0 0 0

public static x.x.x.70 (Interior, exterior) 192.168.3.1 netmask 255.255.255.255 0 0

public static x.x.x.76 (Interior, exterior) 192.168.3.2 netmask 255.255.255.255 0 0

static (inside, outside) x.x.x.77 192.168.3.3 netmask 255.255.255.255 0 0

Access-group 120 in external interface

Access-group 110 in the interface inside

Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

AAA-server local LOCAL Protocol

the ssh LOCAL console AAA authentication

source of x.x.x.x server NTP outside prefer

Enable http server

http 0.0.0.0 0.0.0.0 outdoors

http 192.168.0.207 255.255.255.255 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Telnet 192.168.0.197 255.255.255.255 inside

Telnet 192.168.0.80 255.255.255.255 inside

Telnet timeout 5

SSH 0.0.0.0 0.0.0.0 outdoors

SSH 192.168.0.0 255.255.0.0 inside

SSH timeout 60

Console timeout 0

dhcpd lease 3600

dhcpd ping_timeout 750

username admin password encrypted xxxx privilege 15

username password encrypted xxx privilege 2 admin1

Terminal width 80

Cryptochecksum:xxx

: end

# 123

Anand,

I would check to make sure that the N - NAT has something like: -.

"permit access ip 192.168.0.0 list 123nonat 255.255.255.0 192.168.1.0 255.255.255.0.

And enable NAT - T - she might be his house do not understand/IPSEC passthrough device support:--

"isakmp nat-traversal 20.

And add: -.

"access-list 120 permit udp any any eq 4500.

HTH.

Allow outside access to the subnet to an internal host.

Sorry Pix beginner,

I have a server on my network with a 192.168.1.10 address. I need allow 123.45/16 network to access the server withonly 10 open port.

should I nat address to my server internal, giving it an audience then only open port 22? or is there a better way? If I do this way how can I say only for the inside network and the rest of the world?

That's what I thought, but didn't know how to add access to this specific network:

public static public_ip (Interior, exterior) internal_server_ip netmask 255.255.255.255 0 0

acl_out list access permit tcp any host public_ip eq 22

can I replace the any part of the host with 123.45.0.0 255.255.255.0?

Thanks for any help...

Hello bchyka,

Your static data and ACL seems ok... If you want to access from 123.45/16 network on the public server, you can replace the ACL as

access list acl-enabled tcp 123.45.0.0 255.255.0.0 welcome public eq 22

Otherwise, your Setup program should work fine for traffic to port 22...

I hope this helps... all the best... the rate of responses if deemed useful...

REDA

Do I need an IP NIC of each Esxi host address? VMs needs access to the storage network?

Hi all
The issue go, I have a host machine with 3 nic cards - > 1 for production network, 1 for the management network and 1 for the network backup.
The guest PC VM inside will be connected to the 3 network,
But for the host himself, will be used for management and backup only.
T1) is the bears from production on the need for level ESXI host having an IP address as well?
=================================================================
Right of Q2) now my host use internal storage. If I'm to migrate to a SAN storage, I have 1 more network for storage.
I understand that the configuration of virtual machines and their data are assigned and stored in the data store that is made visible at the level of the host.
They must for the virtual machines access the data store, join the storage network as well? or they are access to the storage through the host
================================================================
Kind regards
Noob

T1) is the bears from production on the need for level ESXI host having an IP address as well?

A NIC itself does not require an IP address. Which IP addresses are required for VMkernel port groups (for example, networking, vMotion, storage access,...) as well as virtual machines.

Right of Q2) now my host use internal storage. If I'm to migrate to a SAN storage...

No, a virtual machine (i.e. the guest operating system) does not require access to the system of storage, only the ESXi host.

André

Is it posible to allow access between the host and virtal machine without wired network?

I want to use my laptop to show him that I did in the virtual work to other people at my home.
However, the laptop is ofen not allowed access to the network in their office.
Is it posible to allow access between the host and virtal machine without wired network?
VMware player
My virtual machine is filled to the physical network adapter and use the static IP address.
Brad

Setting of the virtual machine: filled

Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8). Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address. Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC. Then use this IP address instead of 192.168.1.5.

And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address. The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

How can access us the Client on a virtual machine on the host ESXi VI?

Good afternoon, we are evaluating a virtualization solution, our company is small and we want only 3 servers to virtualize, and we want to use one of the virtual machines on the ESXi host, using the Client of VI, so we can use the keyboard and the screen of this server to access virtual machines. Our idea is to use this virtual machine as a workstation.
Is this possible? or we use VMware server?
Kind regards
Cristian Fernández

It is really not possible. Since the physical ESXi console, you will see only the menus and COS screens.

Marcelo Soares

VMWare Certified Professional 310/410

Master virtualization technology

Globant Argentina

Review the allocation of points for "useful" or "right" answers.

Access denied: the IP address of this computer host is not on the list of eligible access of the target.

Hi all:

I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target." Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

Thanks anyway. National Instrument of love. Hope to work there one day.

LUN access is the only host

Similar Questions

Maybe you are looking for