LV program with Windows Rights

Similar Questions

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• Impossible to install programs with Windows Installer error

  I use a 32-bit version of Windows Vista Home Basic Service Pack 2 and I have problems with the update of Windows Installer, which in turn affects my attempt to install other programs. I tried to get the Windows Installer redistributable version but end upward with a message that the "update is not for my system.

  Hi William,.

  ·        What is the exact error that you receive when you try to install the program?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  However, you can follow the steps below and check if that helps you install the programs on your computer.

  Step 1

  You can check if the windows service install is set to automatic and started and change accordingly. After verification test to check if you can uninstall iTunes and reinstall. To do this, follow the steps below:

  (a) click Start.

  (b) in the start search box type services.msc and press enter

  (c) in the services window, do scroll down to Windows install.

  (d) make a right click on it and click Properties.

  (e) check if the startup type is set to automatic, otherwise it is set to automatic.

  (f) click the Start button, this will start the installation of windows services.

  (g), click on apply and Ok.

  Step 2

  If the steps above do not help, you can unregister and re-register the windows service installed on your computer and check if that helps you solve the problem.

  To do this, follow these steps:
   
  a. click on the Start menu, click on run.
  (b) in the Open box, type msiexec /unreg and then press ENTER.
  (c) in the Start menu, click run.
  (d) in the Open box, type msiexec/regserver, and then press ENTER.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to access another program with Windows Management Framework Core

  Original title: what is Windows Management Framework Core, do I need?

  I am not able to access another program because of the 33 sidebyside error.  The problem seems to relate to Microsoft.VC80.MFC according to the detailed event log message.  When I try to launch my accounting software, it indicates the activation context generation failed.  The only other thing that I have to go on is the date Management Framework Core has been installed and when I could access is no longer my other program.

  I was able to locate a system preparation tool KB947821 to Microsoft Downloads. It is a solution for x 86, x 64 and other operating systems for downloading updates.  After I installed it I went to the Panel of control under programs, put my software disc in the drive, it said to fix it himself and it now works like a charm!  I strongly recommend to anyone with this problem after installing updates get this program.

• I want to upgrade Windows XP Professional to Windows 7. However, I have an old Windows Picture It Photo of 2001 (not 2002) I want to lose. I'll be able to install this program with Windows 7 as my operating system?

  I would like to be sure I can install my Microsoft Picture It Photo (copyright 1997-2001 version) on a new computer running Windows 7.

  Run the Windows 7 Upgrade Advisor and check this program in the Windows 7 Compatibility Center .

• How to create an association in the control panel to the default programs with windows 8?

  Separated from this thread.

  HOW to CREATE a LINK WITH MY EMAIL(*** Email address is removed for privacy ***) BY THE DEFAULT PROGRAMS CONTROL PANEL?

  BM

  If you use a browser to access your e-mail, it is the question.  You can set a default e-mail application if you have an e-mail application and the browser is NOT a messaging software.

  Install an e-mail client and it will work, and that's why it worked on XP because you probably had Outlook express installed.

• ERROR. My home architect Deluxe 3.0 program 3D, compactables with windows 98, ran well on my service program 2 windows xp. I've upgraded to windows 7 recently and everytime I try to run the program I get the sign of the error, missing 3dll to your compute

  3D ARCHITECT HOUSE LUXURY 3.O compactables program with windows xp service pack 2, does not not on windows 7, he signed still missing 3dll on your computer, please help.

  It is a very old application.  Although Win7 worked well for many more apps for my part, some are just not compatible.  I suggest you visit the developers forum and see if anyone else has found a work a round or consider purchasing the latest version.

  MVP - Windows desktop experience

• Windows Virtual XP, Windows 7 Ultimate, will work with Windows 8 or 8.1?

  I bought Windows 7 Ultimate, because I need the virtual Windows XP to run a program that will not install in Windows 7. If I update to Windows 8 or 8.1, the virtual Windows XP always will be installed? If this isn't the case, I can't reinstall virtual Windows XP program with window 8 or 8.1?

  Windows XP Mode (which I believe refer you to-a virtual machine running a licensed copy of Windows XP offered by Microsoft for Windows 7 Professional, Enterprise and Ultimate users) does not work in Windows 8/8.1.  It is not included, nor does it work at all.

  If you have even an application that cannot be improved or modified or used in compatibility mode for a reason you must run under Windows XP (or other older operating systems) - then you need a copy under unused to this older operating system license and you can create your own machine using one of the many virtual (VirtualBox comes to mind) virtual machine management.

• my window 7 cannot open my program that is compatible with windows XP, windows 98 etc.,.

  my window 7 cannot open my program that is compatible with windows XP, windows 98 etc.,.

  Right-click on the EXE and select Properties, then select the compatibility mode.  Also if you have Pro 7 or higher, you can try the windows xp mode.

• Have a Dell PC with Windows XP Home Edition with restoration, internet and the program of the questions that I went into the details in the body of the present.

  I have a Dell with Windows XP Home Edition system that uses the internet connection. Friday, he had a problem with images in line being "pixel-ed", which means that the image was blurred and boxes. So I did a restore of the system back as much as she would in July and concluded that the IAF has a program called accelerator that had been implemented to go faster, but eventually would make very good images. Then, I got that part fixed but now a game that I play "Mahjongg" won't play right and when I go to the area "help and support" to try to reschedule, so it don't open even now. Can someone help me please? Thank you

  Thanks for the help. I returned and reinstalled everything, even if it was already installed and now everything works.

• Windows vista allways ask what I want to open the program with?

  Hello. I have windows vista. recently, whenever I open a program he asks me what I want to run it with. have said that it is a problem of regisry so I restored my way the computer back until the day it worked very well, and he always asks me what I want to start my program with. I can not open all of my antivirus software to see if there is a virus and to remove this virus. can your help please?

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

• When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

  When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file. What should I do?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Access denied on a "documents and settings" folder in windows 7 with administrator rights

  I get access denied on the ' c: \documents and settings "in windows 7 with administrator rights.  The icon shows a small lock on the (very cute) folder. Permissions indicate full control to the folder. I can only access the contents of the folder by adding it to the library folder. The computer is fairly recent and is very near of the original factory. Unlike my precious computers I left it mostly original except for the odd new program. I never really noticed when it pops up as I was getting used to format windows 7 and thought that it must be "the new way" to 7 " The disk has been partitioned by Asus, which significantly added to the confusion. Now I think that it why documents and settings would be in the same folder anyway?  What is a level administrator uber folder? Any ideas greatly appreciated.

  "Documents and Settings" are not a folder - it's a junction Point.

  It is there to allow legacy applications using the latest Windows 7 folder structure.

  There is nothing in what you can use.

  See here for more information about Junction Points:

  http://www.Svrops.com/Svrops/articles/jpoints.htm

  It would have been clear if you looked at the Related Posts - that's what they are there for...

• I'm unable to select new program type to open it with windows Explorer

  Whenever I select the open with option after right clicking on a file type and try to select a program from the list after clicking Browse; the new program does not appear in the list and tried to open the file type remains in the setting of the unknown file type. How to tackle this problem, I am using windows 7

  Hi Priya,

  1. is the issue limited while accessing any program in particular?

  2. what happens when you try to access the program directly?

  This problem may occur if the parameters of the program files are corrupted.

  Try the following and see if it helps.

  Method 1:

  Refer to the steps in the following Microsoft article.

  Change the programs that Windows uses by default
  
  Change default programs using Set Program Access and computer defaults

  Method 2:

  I suggest you to scan Run System File Checker (SFC) tool and check if this may help.

  Steps to perform a scan SFC:

  un) Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  (b) type the following command and press ENTER:

  sfc/scannow

  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]

  Once the scan is finished, close the command prompt window, restart the computer and check.

  SFC Scan - http://support.microsoft.com/kb/929833

  Keep us informed on the status of the issue.