M.2 implementation and Dell 7470

Similar Questions

• On my iPhone, my photo library is taking 8 GB, but I deleted everything to implement and it is not the flow of shared photos. I don't know how to get rid of this storage

  On my iPhone, the library takes up 8GB, but I deleted everything to implement and my shared photo stream takes up no storage

  See this: why my iOS device say I more pictures I can find?

• HP Roar Bluetooth speaker: connection/couple failure - ROAR HP and DELL Laptop speaker

  Anyone know how to get my HP Bluetooth speaker ROAR to pair with my laptop DELL Inspiron 15 (series 5559) (10 Windows 64-bit)?  I get connection failure messages.  I had no problem pairing the speakerphone with my iPhone 6 Plus.  The two units (speaker HP and DELL laptops) are only months and under warranty, but the HP and DELL only offer technical support paying for this problem, that I refuse to accept.  I visited the website of DELL support, hoping to download a driver that is appropriate, but could find no option for Bluetooth.

  Note that, in the Device Manager, under Bluetooth, nowhere the name DELL drivers.  Everything that I see there:

  • THE attribute Service to Bluetooth general
  • Bluetooth mouse 3600 (a Microsoft device, combined)
  • Intel® wireless Bluetooth®
  • Microsoft Bluetooth enumerator
  • Microsoft Bluetooth enumerator THE

  Any help would be greatly appreciated.

  CLEI

  Hi@CLEI,

  Thanks for the reply.

  Don't forget, you can surely join HP forums any time for assistance for your HP product.

  See you soon

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet.

  I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet. I updated drivers and tried everything that other people have told me to try on other forums to the best of my abilities. I'm not otherwise qualified in computer science. Also, I will mention this all started when I restored my computer laptop back to factory settings. I did it because that's all I could think about. As far as coming back on my laptop, he did do the trick. Thus, suggestions, thoughts will be appreciated.

  Thank you

  Jim

  Lima, Ohio

  original title: unable to print attachments from Windows Mail

  Hello

  The print job goes to the queue?

  Method 1:
  I suggest you through the Windows 7 steps in this document.

  Method 2:
  Alternatively, you can try to plug in the printer and the laptop to see if it makes a difference.

• (Redirected) received a defective laptop and Dell is not to honor the warranty, even if they cease of me they will-7 months and counting

  I bought a laptop from Dell 7 months ago and the fan does not work so he's attended more than 100 * C the first time I turned it and since then it did not work properly. I bought for work and were not able to use it. After 5 months of countless phone calls and emails their escalation Department has finally decided to send me a replacement - it was 2 months ago. I have no computer and Dell has thousands. My experience has been so stressful. I can lose my job because I'm not able to do the contracts that I took on. Sometimes, I was on the phone - be transferred from one agent to another for more than 2 hours, and then they cut me. Does anyone have any suggestions? Better Business Bureau? I'm typing this on my old desk as my laptop $ 1000 is unusable except as a frisbee. I would never recommend anyone buying a Dell - unless you have money to throw away. Worst experience of this kind ever. I bought a base coat of Columbia, which had a design flaw, and they were replaced by a coat with a value of 4 X which was my first purchase. They told me that they never "downgrade". Not so with Dell - they wanted to send me a refurbished computer. So frustrating - which can be fact-nothing!

  Hi Crteachermom,

  I'm sorry that you have problems with your laptop.

  Please repost this in the Forum to help customer care.

  http://en.community.Dell.com/support-forums/customercare/

• (Redirected) Order not received and Dell could not be contacted

  I was due to take delivery of my laptop today and follow-up mail forward. Then, I received an e-mail saying that a delivery attempt had been filed and a card left through the box to the letters. No hardened as I have at home all day working in a lounge overlooking on the road; No vehicle courier and no card left through the door. I tried unsuccessfully to contact the courier service, but their automated system has no tree installation pointing out problems like mine and you can not email. So I tried to contact Dell and it was just as unsuccessful that you need all kinds of delivery codes and tastes. You can't really talk to anyone and Dell seems not to care about that. Finally, I used the online chat and left messages but I do not hold much hope. I'm now about £800 small and nobody seems to care. So much for the customer service.

  Anyone else had problems similar, if yes, how did you deal with it?

  Hi Churchward 25,

  You can transfer this in forum customer care for assistance.

  http://en.community.Dell.com/support-forums/customercare/#pi40817=1

• Resilience 4510R Cisco and DELL S4048-suite

  As a central switch using Cisco 4510R. To increase fault tolerance has been purchased DELL S4048 IT. It is not clear how to combine (how to create a battery). Throughout the manual describes how to create a stack with one manufacturer.

  Just try to connect through riders DELL 2 CM 32 and Cisco SFP-H10GB-CU5M.

  It was possible to connect only through the SFP-H10GB-CU5M Cisco when CISCO on the interface speed nonegotiate and Dell speed 1000. She don't go to the link 10 000.

  The error it gives is that the transceiver is not a valid reference of Dell. For fault tolerance, you could just create a trunk between two switches.

• Implementation and Infrastructure Server to a client Application

  Hi friends,

  I'm new to this group, infact new in this field and technology as well.

  I intend to implement a Java client on BlackBerry application. The way that I want to build the GUI of the application uses a XML file returned by the server (J2EE based), analyze dynamically and build GUI components.

  Since then, connection to the server every time and checking the file takes a long time, I would like this file to be pushed on the server each time it is updated and the client should receive and store locally on the device. Timing of the launch, these stored data are read to build the GUI.

  Content, from what I read so far, it's possible spawning a listener thread on the client side to run in the background and listen to the Server grows regularly.

  If the above said is fine. I would like to know the details of infrastructure, configuration and deployment required for the implementation and test on a physical device and emulator backberry, such a request.

  -I can create a client application using backberry than GUI related API and write code to spawn the background thread to listen to a port

  Question) how do I know if the port to which I have listened to and how to deploy the application on the device?

  -Server code will be used to push the XML to the client using POST

  Question) how to set up devices in destination to which data must be pushed?

  Question) what role do MDS and BES play in this communication?

  As a user of the device blackberry and developer, how can I get access to Blackberry Enterprise Server?

  I'm extremely sorry for this long message.

  I would be grateful if anyone can provide suggestions or ideas.

  Thank you

  Suresh.

  # 1, you can create an application to auto-start.  In, open the properties of the project for the application by right-clicking on it in BlackBerry JDE.  Click the Application tab, then check the Autorun at startup feature.

  #2 is supported by the BlackBerry Enterprise Server.  It provides content to the BlackBerry on the wireless network.  If you're looking to push the same data on multiple devices, please see the following link

  What is - Push content to multiple users in a single push request
  Article number: DB-00517

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800662/What_Is...

• Security and dell updates Computer Configuration screen new

  Hello

  A new computer, arriving today, will be a year 1 subscription of McAfee internet security. I prefer not to activate, but rather to install and use one of my 3 licenses for Norton Internet Security 2013.

  The new Configuration screens computer Dell have one called 'security and dell updates' which saves both Dell and the McAfee subscription updates. No other choice except all cannot be ignored.

  If I skip this step, (1) this will prevent activation of McAfee (if not turned on, then maybe I can leave it on the computer should I want to later uninstall Norton and use McAfee, if possible)? and (2) separately, manually register updates Dell so I don't lose this Dell Update functionality?

  saratogacoach

  Computer configuration

• Boot from SAN Dell R710 and Dell MD3200i!

  Hi all

  I have Dell R710 and Dell MD3200i, now I would like to install the hyperviosr in a SAN lun. Can someone guide me that?

  Thank you

  Tho

  Hello

  1. you already have SAN LUNS allocated and the WWPN of Hope details. for this info, contact SAN team.

  2. ensure that HBA card installed on the Dell server is configured for SAN bootable at the BIOS level

  3. go in the name of the document below URL to get the Setup instructions for ESXi 5.1: vSphere Guide Installation and http://www.vmware.com/support/pubs/vsphere-esxi-vcenter-server-pubs.html

• VMware HA with 2 x ESXi and Dell MD3000i?

  Hi all

  I have a task at hand to set up with VMware HA.

  What I've done so far,

  (1) to this end, I have 2 identical Dell PE 2950 servers and Dell MD 3000i as storage device.

  (2) installed ESXi 4 in servers (ESXi1 and ESXi2) and configured the static IP.

  (3) I configured the iSCSI SAN (MD3000i) and created the host (VMHA) group.  Added the two hosts in the host group

  (4) virtual disk created, which will be shared by both hosts and it mapped to the host group.

  I know how to install vCenter and how to create the HA cluster as well as adding guests inside.  But before that, I have a few questions.

  According to the theory the shared storage must be accessible by the two hosts.  How can I add storage shared on SAN in the hosts.  I know that the navigation, but miss me the theory somewhere.  I added shared as Datastore2 and ESXi1 and formatted with VMFS3 storage.  Now how could I add the same storage shared in ESXi2?  When I tried to add, the steps asked me to format again shared storage that I can't do?

  Thank you all for all the remedies fast

  Nadine

  You analyze it again on the second (and subsequent).   Add the that storage is being used on the first host.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• (Redirected) How can I complain formally partner DELL and DELL customer service?

  I'm waiting more than eight weeks replace spare parts to DELL for DELL Latitude E7250 and E7240 computers laptops! Does someone know how to complain and to speed up the process?

  Initially, partner DELL says there is no spare part for sale! (it was the battery) your request and after I called DELL customer service, they changed their words and send a cost and delivery time 6-8 weeks (which is not acceptable). It makes no sense to wait for more than 8 weeks to get the knockout, battery or LCD for products still under warranty.

  Unfortunately, DELL customer support could not help and their response was not acceptable, it seems that DELL customer support and DELL partner care not their client :(

  Noting that we have more than 170 DELL Ultralight laptops and more than 300 computer desktop DELL Optiplex 7010 and 7020 only at the regional office and many others in the country offices.

  Hi elarousya,

  Please repost this in the customer forum help. It is a holiday of Thanksgiving here in the US, so it will be Monday before one is available to help you.

  http://en.community.Dell.com/support-forums/customercare/

  You can also send a private message to Dell - Lorna M. it is in our customer forum. She will return to work on Monday.

  http://en.community.Dell.com/members/dell_2d00_lorna-m

• Impossible to establish a connection between microsoft router, modem, motorola and dell/windows xp computer

  I have not set up a connection between my computer dell/windows XP, Microsoft router and my Motorola modem. After reading the instructions for the router and set up like it says anything I've set up my computer say it is connected but is not really plugged. My ipod says that there is this WiFi but when I try to access the internet on it, it gives me a message saying "unable to connect to the internet, there no connection detected." The only time where I have Internet on my computer is when I unplug the Ethernet to the router and modem and have the modem only connected to one computer. This problem is can cause because my modem is configured with a cable from cox and not connected to a phone cord? (My router is a Microsoft Broadband networking Base station wireless MODEL: MN-500) (My modem is a modem cable Motorola surfboard implemented with internet helmsman) (My computer a DELL Dimension E521 with a windows XP service pack)

  SP3 is on it? Wireless is enabled on the router? Try this

• vSphere 5 and Dell Equallogic iSCSI

  Hi all

  I need some suggestions on how to implement my iSCSI network

  I habe 2 x power R520 edges with 2 network cards to edge, 4 x PCI Nic and 1 x Dual Port Nic Cards-> network so 8 total

  and an Equallogic PS4100 with 2 controllers and 2 network cards on each controller

  I have 2 Dell switches for my iSCSI network.

  The address of the Equallogic MGMT is 10.10.1.100

  The group IP address is 10.10.1.101 - or should these IP in the iSCSI network

  My iSCSI network should be

  192.168.1.x / 24

  do I need to a single network or do I have to use 2 different networks in order to obtain the failover job.

  I plan 2 or 4 NICs for iSCSI vmkernel traffic - what do you suggest?

  If I use 4 network cards - use 2 vmkernel ports with 2 links and aggregation of links on the switches? Or can I use 4 ports vmkernel and round robin?

  ESX1

  vnmic0 192.168.1.1

  vmnic1 192.168.1.2

  ESX2

  vnmic0 192.168.1.3

  vmnic1 192.168.1.4

  EqualLogic

  eth0 192.168.1.5

  eth1 192.168.1.6

  ESX1 + ESX2

  vmnic0 - iSCSI01

  vmnic1 - iSCSI02

  SwitchA

  vmnic0 Esx1, vmnic1 ESX2, eth0, eth1 ControllerB controlled

  SwitchB

  vmnic1 ESX1, vmnic0 ESX2, the controller has ControllerB eth0, eth1

  Do I have to master two switches?

  concerning

  Bestfriend

  Hello

  I recommend 2 virtual switches with 2 network cards in each. Multipathing in fixed for each switch if it's an active-passive array and Round Robin if it is an active-active array.

  1 VLAN should be fine.

  MTU = 9000 in all the components of your infrastructure iSCSI (jumbo frames).

  Try to have HA in each part of your infrastructure and you sure you don't have 1 vSwitch connected to the 2 ports on the same HBA and using the same switch...

  If you have the option to make the "fast track" in your switch, do it.

  CHAP authentication more secure, you can (if initiator software, I think that they are, mutual CHAP)

  You don't need chest 2 switches.

  Try to keep your number of VMs distributed among your LUN (to not collapse them with SCSI reservations)

  That's all I can think of at this time. I hope this has helped you! If that were the case, do not forget to assign the corresponding points, so we are all winners!

  Kind regards

  elgreco81

• SanLink2 and Dell Compellent SAN?

  Hello world

  I'm currently developing a sharing of the AFP on a Mac Mini with our Dell's Compellent SAN fibre channel storage.

  I have a late 2014 Mac Mini connected through love at first sight for a SanLink2 adapter CF 16 G.  The adapter has two HBA that is connected to our Cisco MDS 9148 fibre channel fabric switches.  The WWPN of the HBA on the adapter have been the subject of a zoning on the fabric buttons, and we cannot FCPING SAN HBA successfully.

  However, we have 2 TB of storage of our Compellent SAN to Dell for the mac mini, and I can't get the mac mini to see volume (do not see it in disk utility and can not see all the new drives in / dev).  I have a support case to open with promise, but he was curious to know if the community had seen.

  I tried fell different cable, different fibers and several reboots.  In my research on Google, I've learned a fun terminal command under OS X: fibreconfig-l [it's a lowercase L].  When I run this command, all I get is the following:

  terminalprompt # fibreconfig-l

  Controllers of

  Targets

  NodeWWN 23:00:00:01:55:5 B: 29:08

  NodeWWN 23:00:00:01:55:5 B: 29:08

  In my monitor OS X system, under the section of Fibre Channel, I get a little more information, but I'm under the impression that I should see (s) Lun in there and I'm not.  Here's what I see:

  Seller: promise

  Product: SANLINK 2

  Review: Firmware 1.1.65.30 material b

  Initiator identifier: 3791655135

  Node World Wide name: 23:00:00:01:55:5 B: 29:08

  Port World Wide name: 24:02:00:01:55:5 B: 29:08

  Address identifier: AE:16:00

  Description: Port 1

  Speed: 4 Gigabit ports

  Topology: Auto (point to point)

  Status: Connection established

  Cable type: optical fiber

  I can provide more information if necessary.  Thanks in advance if anyone has any ideas!

  Hello

  I know some FC HBA require that either a device mapped to LUN 0. For these HBAS if there is no mapped to LUNS 0 none of the storage will be recognized by the client. It has been my experience that whatever it is based on the older chipset of the LSI FC has this problem. The original SanLink FC HBA has no need of any drivers that was also the case for Apple brand LSI FC HBA OSX - thus could perhaps use the some of the previous control logic? Additionally, make sure that you are properly set up as point to point or FC - AL topology in the SANLink 2 configuration utility - this should match what is your San.

  Try this:

  1) map to the storage presented to the Mac with 2 SanLink to LUN 0

  (2) check the topology setting (try it was taking off from point to point auto and try first)

  (3) check if there is of"security groups" on storage that there ID WWN of the SANLink2 registered

  (4) make sure that the storage and the Mac are zoned properly on the FC switch (could be WWN zoning or rezoning of port, in both cases, it must be set up correctly).

  I hope this helps!

  -Jonathon Lee