M - inspected target chrome version 40.0.2214.111 crashed
Hello
I have a few projects in edge 2014.1.1 CC and everything worked fine in all browsers until yesterday
yesterday the chrome (windows 8.1 64) updated since version '40.0.2214.93' ' 40.0.2214.111 m.
now I have to load the pages twice:
the first time I get "Aw Snap!", in the debugger shows ' inspected target crashed, once it recharges will strive to it automatically.
Press F5, and then it loads well
Press again on F5 and got the same error 'Aw Snap!' , In the debugger shows ' inspected target crashed, once it recharges will strive to it automatically '
and so on,
an idea?, best regards,.
Paul
Hello
Thanks for your post.
Can you please try reset google chrome browser settings.
Reset the settings of the browser - Chrome help
Also, please share any link of your animation so that we can test this issue.
Kind regards
Devendra
Tags: Edge Animate
Similar Questions
-
Could not load the plugin - Chrome Version 49.0.2623.112 m
from the last week or so, my flash stopped in Chrome, but always works in Firefox and Edge. Chrome is updated. I followed all the steps of the help page of Flash Player without success. I joined cause screenshots using Flash drive as well as all my plugins. Has also received the same result in Mode Incognito.
Windows Pro 64-bit 10
Chrome version 49.0.2623.112 m
Flash version 21.0.0
I would say that what jeromiec83223024 suggested, it is possible that they could get corrupted.
IF this does not work, try to use a 64-bit version of Chrome (if you have a 64-bit computer. Here is an Article on 64-bit versions
I would like to delete the data of the application here: C:\Users\%username%\AppData\Local\Google
If you need your bookmarks and auto-fill stuff, they are:
C:\Users\%username%\AppData\Local\Google\Chrome\User Data\Default\Bookmarks
C:\Users\Carm\%username%\Local\Google\Chrome\User Data\Default\Web data
When you install the new version, you will need to run it once to get the folder structures back, then just replace these files back
Personally, I don't mind setting it back up as I'm sure it will be nice and cool, but that last part is your choice
Of course, it will be a decision you have to make.
Hope that helps more
Best regards
-
Latest version of iTunes for Windows crash it opens every time
Hello
The latest version of iTunes seems to crash whenever I use it. The crash of app in the first ten seconds I open iTunes. I uninstalled iTunes and all components (Apple Support, iCloud, etc.), deleted my library and started a new and unfortunately, nothing seems to change.
However, this problem is only on my main administrative account. I had no problem with the user account only on my computer.
Here are the accident report:
Log name: Application
Source: Application error
Date: 04/01/2016-15:30:35
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer: -.
Description:
Name of the application failing iTunes.exe, version: 12.3.3.17, time stamp: 0x56ed1c3e
Errichteten module name: JavaScriptCore.dll, version: 7601.5017.2000.2, time stamp: 0x56eca371
Exception code: 0xc0000005
Offset error: 0x00000000001e70c0
Errichteten process ID: 0x21bc
The failing application start time: 0x01d18c4cf3ee451a
The failing application path: C:\Program Files\iTunes\iTunes.exe
The errichteten module path: C:\Program Files\Common Files\Apple\Apple Application Support\JavaScriptCore.dll
Report ID: 349bced6-f840-11e5-b55c-000272dbe280
Thank you
I also tried to fix the iTunes and Apple Support after the removal of the JavaScriptCore.dll in the Program Files/Common/Apple/Apple support. The repair process worked, but iTunes still accident.
-
Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file. He always loaded the image at the point Windows 8.1.
Any ideas?
davids62398138 wrote:
Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file. He always loaded the image at the point Windows 8.1.
Any ideas?
It was reported many problems with older versions of PSE and WIN10.
Can you open PSE from office or from the list of programs on the start menu?
-
My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about CS6, rebootet and so forth--nothing worked. Two hours later, I tried to install DW 5.5 - that worked. Then I tried again to install 6.0 - without success. Can anyone help?
Thank you for your response. I could not find caps.db.
Meanwhile, I solved the problem as follows: I searched "dreamweaver" everywhere one deleted all that I could find. Then I googled "CS6" and did the same. I guess that there are around 20 or more places where I deleted files or directories. Suddenly, installation has not prevented, to 2%, what he has always done before and the installation was a success :-) It cost me more than 4 hours to understand this, and I have found a trick somewhere really help. Adobe itself I could not contact because I couldn't find an email address or a phone number - poor support for such expensive software. For luck, I didn't deliver something just in time. Missing a useful support, it's an attitude really poor, poor Adobe... I think that I do not buy not more products Adobe - it could cost too much of my time... :-(
-
target setting / version information
Hello
When a new version of a software I update usually "version info" dialog box in the settings of the target. I just realized that these settings are different for the debug and release mode... Why is it so? We will distribute the release, not the debug version, so why are there two separate inputs must maintain? In general, I use the debug mode, and only at the end did I move to relase mode. So in general I adapt the settings in debug mode (year, major/minor version number) - so far I guess that's the version information in what concerns the trigger mode, but not the same...
Wolfgang
(1) well, the idea was that in most cases the binary debug version is not important, whereby users can leave it by default (1.0.0.0). But if someone cares about the version then they can put to something else, or enable auto-increment, for example.
If you care about the version of the binary of debugging, you can always go ahead and put them both the same value, initially. You can enable the auto-increment in both cases, and each configuration increment independently, which shouldn't be a problem. In this way, you don't have to remember to change it whenever you start to build release versions.
You're right about the 'Configurations' not allowing you to have different values for 32 and 64 bit. I guess that in this case, you just need to go in this dialog twice. For both the 32-bit version of config (assuming you have only one of them) and once for the 64-bit version of config (assuming you have only one of them). Since you don't care the debug versions, then you can leave the default value.
(2) preview isn't possible, because you must have a specific configuration selected in order to obtain an overview of the variables subsitutions. For example, the values of the variables arch % and rel_dbg % dependent on configuration, so it is not sensible for an overview when you do not have a specific configuration selected.
The gradation of the option values is also intentional. It is a conventional way of indicating that some options have different values when you change more than one object. For example, when you change two digital controls in the user interface editor, and they have different labels, then the dialog box will show you the label of one of the controls, but it it darkens. This does not mean that you can not change it. You can change it, and everything that you change to apply for both controls, or, in this case, all configurations. It's fair to say that the dialog box can not show you all the values.
In fact, looking at this new dialog box, I found a bug and it's that checks the Version of the file and the Version of the product do not seem to be dimming their values, even when they are different. Who should also to be grayed out, just as other controls in this dialog box.
Luis
-
Chrome version of Tablet pulling up of office
I have experience several of my sites of MUSE, pulling up the versions of the tablet of the site when open in Google Chrome on desktop computers. Is there a fix for this or anything I can do about it?
This is due to a known bug in Chrome 32. Please see the thread below for more information - http://forums.adobe.com/message/6026429#6026429.
Thank you
Vinayak
-
On a Windows 7 (32 bit), I've already installed Flash player version 11.1.102.55. Internet Explorer (version 9) running Flash Player but Mozilla Firefox (version 9.0.1) content and Google Chrome (16.0.912.75) keeps that requires an updated Flash Player version (already installed the last of them: 11.1.102.55)
Well, Google Chrome has integrated Flash Player that you can not change, update of Google Chrome.
In C:\Windows\System32\Macromed\Flash files contain only the Flash Player for Firefox, so I don't know how you play Flash with I.E.9(9.04?) videos.
I suggest a clean install: How to do a clean install of the Flash Player?
Be sure to run both of these installers.
-
Targeting different versions of the operating system with the same code
Hello again,
I'm looking to use some features of the OS 5.0 such as the transitional API. Is there sort of having a base code that will compile in different versions of the JDE, but exclude the code blocks if the OS does not meet the requirements?
For example, transitions on a device to OS 5.0 but not appear on device OS 4.5.
Ideally, I'm looking for a solution that would integrate directly with Eclipse and debug without any extra steps in the two versions of the operating system.
Try to do research on the "preprocessor directives", you can use this to do what you need.
Basically, you wrap the code OS 5.0 in the guidelines such as:
#ifdef VER_5
System.out.println ("This compile for 5.0");
#else
System.out.println ("This compiles for no 5.0");
#endifThen, enable you or disable directives in the compiler generate COD versions for each platform.
Jason
-
ASA-SSM-10 inspection load 100% (version 7.0 (5 a) E4)
Hi all
I have a challenge with the IPS module in ASA5520, ASA-SSM-10. When we start a try to connect to Web servers, I get a load of 100% inspection and will slow down the traffic/performance.
We test with 63000 sessions per minute making a load of: the test-servers (clients) on the web servers of 20,000 Kbps and traffic from servers web-back to the test-servers (clients) 75.000 kbits/sec.
Can you please advise what to do because we cannot live with this environment only when this is fixed.
Thanks in advance,
Erik Verkerk.
We have not used charge of inspection in order to determine the appropriate sensor performance, instead, we have relied on "percentage of failed package" reported by the sensor. When the sensor gets into trouble, that they will begin to run out of packets for inspection, this causes the sensor wrong determination of the TCP State for some of the connections. This causes the sensor to use more resources than necessary to inspect traffic, leading to lack more packages.
It is its called the "death spiral" and we try to avoid it as much as possible.
Cisco has a long and proud history of providing performance numbers 'blue sky' for their products. We used to refresh their numbers of performance of the IPS sensor by half, but they made improvements over the years and now we take only about 1/3 wide of reported values. You can see for yourself with real, live production traffic.
I'm havn; t found the number of signatures in a meaningful way sensor effect performance unless you touch abnormally difficult or lit a large number or tuned to perform many actions per second.
-Bob
-
RoboHelp9 Chrome Version 44.0.2403.155 and WebHelp files
Is there a fix to allow .htm files to display in Chrome? The files are stored locally and I applied the local fix. We need to publish to an FTP site? Your help is appreciated!
Beth
Given that the problem is with Chrome which may be more strict than other browsers, it might be useful to put the webhelp on a web server rather than on a network server.
If a blank display can be associated with ECMS, it years past we were also see it with webhelp since browsers started to update more frequently. Thus, it was not such strange behavior and I suspect that it is behind the comment by Captiv8r, like me, he is no more would associate it just at CHMS.
See www.grainge.org for creating tips and RoboHelp
-
Firefox Setup version 35.0 (Offline Installer) crash on windows XP
Added screenshot
There is a bug in the installer of Firefox 35 which forces him to crash if the XP firewall is disabled. We have identified and corrected for future versions.
and no, Firewall window doesn't not part of Firefox
-
Hello!
The latest version of iTunes hangs / crashes whenever I try to open it. It also freezes my iMac mid 2011 and I have to force a stop to the bottom of the power button. I have disabled all programs that I used to have to start etc (he was one of them). Like a fool, I have not time machine my camera until I installed the update. With iTunes left completely alone, my camera works exactly as before.
If all goes well, thank you for your help!
What version of iTunes installed on your Machine id?
Run this test and post the results here.
-
I had some problems with Firefox that I use since I got a computer... a few minor things that have been sorted easily. Since I downloaded Firefox 9.0.1, I have about 3-5 minutes to enjoy it before it crashes. I restart again and again and the same thing happens. Unfortunately, I am forced to use Chrome for now and want my Firefox in return. I hope you can help.
After all the trouble I had with grave down, I started Firefox today and turned off all my addons and it worked fine. It was a problem with the addon then I'll add them back at a time until I see that. Thanks for your help... Pat
-
When I'm on Facebook or a game, it freezes and I have to hit Ctrl alt del, for a response. Within a few seconds more, the same problem occurs. I did not have this problem with the previous version.
Well, if you want to back up and try to fix it.
Firefox 3.6.16 is at http://www.mozilla.com/en-US/firefox/all-older.html
www.mozilla.com -> all systems and languages-> Firefox 3.6.16
Maybe you are looking for
-
What does the star mean?
I was going to listen to the cast of Hamilton record when I noticed a star next to the title of the first track. Anyone know what this means? I also noticed it next to a few other songs on other albums.
-
Try to remove the part back, but don't know how the lower plastic is removed to show the screws of the suggestions. Tablet will no longer connect to the wifi.
-
Polyfit forced through the origin?
Is there an easy way to force a 3rd order through the origin polyfit or slow down through a point?
-
VISA write error 1073807298 with mbed
Hello everyone. I use the mbed card for my new project.I'm not familiar with the mbed, so I tried to do a few led flashing with labview. I get the error message 1073807298. I tried hunting VISA and VISA defined I/O as recommended messages previous bu
-
What happened to all the games?
I currently use Windows 7 Professional upgrade version. So that it can install work I ended up doing a cleaning. When you run windows 7, I found I have not all windows as hearts games, solitaire, spider solitaire. This version comes with these gam