Polyfit forced through the origin?

Similar Questions

• When I have 4 or 5 tabs open, by selecting one of them often force this tab to open in a new window and close the original window

  FF 32.0.1. Move between the tabs that are already open, clicking on which I opened before forced to close and open in a new window, which is a real pain. It seems to happen when I have 4 or 5 tabs open, rather than 2 or 3.

  Only, this happened last week, once reinstalled a clean Windows.

  I searched and found a lot of people have problems with the new windows that open when they want just a new tab, but this seems to be on the opening of the fresh rather than return to already open tabs, so I can't find the same problem I describe.

  This can happen if you drag a tab slightly downwards in the browser window by clicking.

  Firefox has a feature called tabs
  You can detach a tab in the current window and open in a new window by dragging a tab in the browser window.
  You can also do this via the context menu of a tab: switch to the new window
  You can drag the tab to the tab bar in the original window to cancel this detachment.

  • https://addons.Mozilla.org/firefox/addon/bug489729-disable-detach-and-t

• I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. The installer with

  I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software. »

  then it is probably too old and incompatible.

• The Bookmarks button is now completely missing, and it's forcing me to go through the bookmarks toolbar. The use of FF 17 under Windows 7.

  I just put VII Windows on this computer and therefore had to install 17 FF (I think I was still fifteen years before).

  On this new version, there is no single 'Bookmark' button click to access my favorites and I have to go through the "Bookmarks" thing to the right which gives me no access to most of my links.

  The old method was very good, why do fuck with her! How can I get the single button back so I can open the list of bookmarks together?

  I thought it just a minute ago. It must be because I was running Vista before and 7 now. Bookmark system came back to an older style with a different interface.

  Please, close this issue. Thanks to those who took the time to answer!

• Hub topology and talk: can I traffic Internet road to PC at a radius of the site through the tunnel and NAT outside in the world on the 5520 hub?

  I don't know if it can be made to work or not, or if it's a mutually excluded NAT configuration that is not possible, but I have a 5520 ASA to my site central office with a fiber of 20Mbps Internet streams and two remote offices with ASA 5505 devices connected via DSL or cable modem and have finally got from Site to Site "spoke" VPN upward tunnels and run with the ability to route traffic to through a 'hairpin turn' speak-to-Spoke on the Hub Site 5520.

  I have desktop PC at each remote site speaks A & B that need to communicate directly with them to support a small group of work-style of the software point of sale that is actually hosted on a remote site A PC.

  PC on two remote sites must also be able to communicate with a credit card processing by the public Internet service, and I wish have the ASA 5505 units in each block of remote office as all traffic directly NAT'ed from each respective out on the local LAN PC straight Internet above each site cable modem or DSL modem. I want to force these PCs need to NAT their Internet-destination back through the ASA 5520 traffic located at the Home Office, on the VPN tunnels. In other words, I want the cable modem and DSL connections to route traffic strictly VPN encrypted to the Home Office and also behave like routers NAT for the local PC it.

  I can kill the 5505 prevents NAT for PCS in remote offices simply removing the rule dynamic NAT factory default for 'everything', but then I can't understand how to get my 5520 central to perform NAT which required of the remote PCs to talk to their service of Internet credit card processor without breaking the configs "NAT-free" necessary for VPN traffic to spoke-to-spoke to work. If I'm trying to put an entry static or dynamic NAT for a remote desktop on my 5520 ASA central, it breaks the VPN tunnel so that PC specific.

  Is that what I want to accomplish even possible with the ASA?

  Hi Neal,

  Yes, it's quite possible! below is a loss of things you need to do:

  (1) make sure of course on both the 5505 s of the ASA, you send ALL traffic from the local network through the VPN.

  (2) as Andrew mentioned, have the 'same-security-traffic permit intra-interface' command on the ASA 5520.

  (3) you do not have to have a configured proxy server, but it is also a good solution. But to make it work without her, assuming that the ASA 5505 remote subnets 192.168.1.0/24 and 192.168.2.0/24, add the config lines below to the ASA 5520:

  NAT (outside) 1 192.168.1.0 255.255.255.0

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Global 1 interface (outside)

  Please note that 1 id, and the interface can be replaced according to the configuration you already have in place in the ASA 5520.

  I don't know what kind of NAT exemptions are at the origin of the questions for you, but if you can put a sanitized one of your ASA 5505 and ASA 5520 config, I can make suggestions concerning the exact configuration.

  Let me know if it helps!

  Thank you and best regards,

  Assia

• lost or stolen iPhone. It is w / 'Find my iPhone', later received email that it has been found. No call and impossible to recover, now phone is in offline mode. I am leasing through the iPhone upgrade program. Help, please.

  6 sec more lost/stolen iPhone. Turned on the 'lost' Mode and displays the number to call if found on-screen. It is w / "Find my iPhone", went up, no response from any home in the area. Later received an email that it was found, still no call to the number on the screen. Several unsuccessful attempts to get it back, now the phone is in offline mode and says that the history of the site is not available. I left a note on all the doors in the place indicated on the "find my iPhone" describing my phone lost and left a number to call. I am leasing through the iPhone upgrade program. Help, please.

  There is no way to locate now, unless the one who found it exerts a force on you contact on this number you posted

  The good news is, since you have find my iPhone, they will not be able to reuse the phone even if they are trying to restore. Unless they know your password, or you have a valid proof of purchase AGFI won't be deleted.

  So if the person who found the phone knows about it, he or she would rather go back because it would be of no use to them.

• Disabled but MultiCam clip the original always support here

  I am almost at the end of a long project and all my blocking clips are red with the warning triangle.  The original media, where the multicam clip is composed of, is still there and accessible if this isn't a case of media missing or not coupled. In this case if I am posting in original mode of listening or proxy.  There are two other library projects which are being edited in exactly in the same way, but they all work perfectly.  My only saving grace is that the library works fine on my laptop so I can power through the project on my MBP, but I want to understand the problem when it happens in the future.  Is there a way to 'fix' the multicam clip so that it can be updated without having to replace the old with the new?  It's a pain.  Sorry if this has been covered in another thread, but I was unable to find one.

  My library is on an external drive and I ran the first care about it.

  Strange.

  Any advice would be appreciated.

  WWhat do see when you open the multicam clip in the multicam Editor?

• E-mails in response suddenly placed under separate entities to sometyhing that opens with the original e-mail. E-mail useless with this 'feature', that I can not turn off.

  OK so, I knew that I had a response because he had a new email in my Inbox.
  Now there is no such convenience.
  I have to look through emails, I sent for a small arrow that indicates that someone has responded. When I click on the email that someone replied, the original e-mail opens, as well as the answer.
  I does not change this parameter and cannot locate this setting.

  All this would be a highly undesirable behavior of the client thunderbird, for me at least.

  The menu bar, select View-sort by Unthreaded

• When I click on a tab, it goes to the Yahoo home page. How can I change this back to the original setting?

  The original configuration is a series of tiles that have shown my most visited websites. I want to return to this setting & don't know how to restore it.

  You can check the browser.newtab.url pref on the topic: config page and set this pref to your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• You reply to a message in mail causes the original message to disappear

  Over the past two days, when I answer some messages in Apple mail (linked to a Google mail account), it removes the original message and watch my answer in the Inbox - how can I stop this? It seems that the original message is deleted from everywhere on Mac if it is still in all messages if I look on my iPad.

  Spin OSX El Capitan on a Macbook Air.

  Hello TImG9,

  Thank you for being part of the community of Apple!

  As I understand it, while using Apple Mail, after you reply to a message, the original message is more visible and your answer is displayed in the Inbox.  I know how much we all count on our email so it is important that it works the way we expect.

  Before doing anything, the first thing I would do is all that is on the backup computer. Nothing that I will propose should result in no data loss, but it's always a good idea to have a backup.  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Then go through the steps given here:

  Address postal (El Capitan): If messages seem to be missing

  If you get to the step of having to recreate the mailbox, follow the link to the previous document or click here:

  Address postal (El Capitan): rebuild the mailboxes

  Have a great day!

• I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  and when I go to install the mac lion antiracism apple with reticle logo means error

  what can I do with these

  Please help money

  You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

  If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  

• PC Windows 10 > the songs on my MUSIC FILE could not be used, because the ORIGINAL file was not found!

  How to find the original on my windows 10 PC file?

  The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parents, or the reader, records it feeds has been a change in the letter of the drive or you have moved a non-portable library to a different path (see make a split cell library for more details). It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

  Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. Look under the file tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

  In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find titles in the same provision, artist / album, they were previously, with a systematic change to the path.

  If another application like Windows Media Player has moved/renamed files, or the library was moved from OS X to Windows, then chances are that subtle differences in naming strategies it will be difficult to restore the media to the precise path that iTunes is pregnant. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

  If you want me to try to provide specific advice, please post back the following details:

  1. The location of the media file under Edit > Preferences > advanced
  2. The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
  3. The real path to the file which you gave 2 details.

  TT2

• Recovery disk hard nine of the original recoveded image

  I had a hard drive fail but managed through recovery programs data to restore the original image on the D drive. The previous owner never did the recovery disks. What I have to do to run this recovered data to load on a new drive?

  Ok. I thought maybe it was the situation. I ordered the recovery disks and brought the box back to life.

  fthoma wrote:
  

  I had a hard drive fail but managed through recovery programs data to restore the original image on the D drive. The previous owner never did the recovery disks. What I have to do to run this recovered data to load on a new drive?

• Need the original BIOS for Satellite A210 - 1AO PSAELE

  Hi all!

  long in vain looking for the original BIOS for my satellite A210-1AO PSAELE-03Q00FRU (Vista32bit preinstalled).

  Unfortunately I've updated and laptop lost the ability to disable.
  VERY noisy DWD - ROM (TS-L632H) through the BIOS (but it worked without a doubt with the original BIOS)
  It is also impossible to turn it off through the Device Manager (tried several times).

  I looked for BIOS anywhere where I could (Yes, I tried to download & support from Toshiba for Europe, USA, Canada, China, Russia - no. satellite A210 PSAELE BIOS in lists, even for the A200 PSAELE).

  Written in support of the Russia of Toshiba - no result. the point is that I don't know bios original version for my model, so I tried BIOS version 1.1, 1.4, 1.5, 1.8, 1.9, 2.0, 2.3 - no result.
  The latest idea is to physically remove the DVD-ROM, but it is the solution.

  So where can I find that BIOS? or you recoomend a truly customer friendly toshiba can support office?
  Thanks in advance!

  Hello

  The Toshiba driver page provides us with all versions of BIOS for Satellite A210/A215 (PSAEGU/PSAELU)

  Toshiba Satellite A210/A210 PSAELU US is the same series as series of Toshiba Europe Satellite A210 PSAELE

  [Versions of BIOS for Satellite A210/A215 (PSAEGU/PSAELU): http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1757694& rpn = PSAEGU & modelFilter = A215-S4697 & SelCategorie = 2756709 & selFamily = 1073768663]

  Welcome them

• Satellite A500 - how to reinstall the original Windows 7?

  Hello

  I bought the Toshiba Satellite A500-19U and Windows 7. I tried to create a new partition, then I've done assets so he hid, after restarting the laptop, I had a black screen and massage (bootmgr is missing)

  So I installed another copy of Windows 7 just to connect to my computer. Then after the copy of Windows 7 installation I made inactive D if it appeared there is file recovery. So my question is: as long as I have this file I want to reinstall the original Windows 7 I have in the drive hard, but how?

  When I press F and repair, then it does not give the last option of HARD drive recovery! Why and I have the recovery file?

  Please help me

  Hello

  I guess you didn't read the manual user, first of all. I m right? ;)

  Well, normally HARD drive recovery you can start if you go into the advanced boot menu (F8) and select Repair my computer. After that, you can choose the option of HARD drive recovery.

  But I guess that this isn't possible anymore because you have installed another copy of Windows 7. If this menu isn't available anymore.

  The only option to restore factory settings using the Toshiba recovery disc. Did you create it? This can be through with preinstalled creative drive recovery Toshiba but if you didn t create it, it s too late now, too.

  The only option now is to order a new drive Toshiba Recovery directly. So take a look in your user manual.