S205 Lenovo with RaLink 3090 series wifi adapter problems - update driver 3.2.1 solve?

Similar Questions

• connection Ralink wifi adapter problem, how to fix on a HP Pavilion g seris

  My Hp laptop does not connect to internet, it has the following wifi adapter. How can I solve this problem. RalinkRT5390 802. 11 b/g/n

  Hello:

  Are the rest of your PC / devices connected to the internet?

  If Yes, try to install the latest driver and see if that helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=VC-91565-1&mode=4&IDX=2

  If you have no other wireless devices to test, restart your modem and router, and you must do it in a certain way.

  1. close all PC.

  2. turn off the modem and the router.

  3. turn on the modem only.  Wait about 2 minutes.

  4. turn on the router. Wait about 2 minutes.

  If you have a modem/router combo, then you need not step 4.

  5. start the PC and see if you can connect.

  Paul

• ENVY 15 j040el (Italy): replacement/upgrade for RALINK RT 3290 wifi adapter

  My RT 3290 RALINK wifi adapter supplied with HP ENVY 15 Notebook j040el (bought in Italy in 2013) has stopped working.  I got to know of it when all of a sudden I couldn't access the internet more but my Tablet worked fine, so no fault of my ISP.   Fortunately I had at hand a USB wifi adapter to my office, and in him reconnect the wifi was back.  So my RALINK RT 3290 went for sure. Unfortunately, my warranty expired last year, and I can't ask for a free replacement of HP.   There is no RALINK RT 3290 on Amazon Italy.   I've seen a few complaints about the RALINK RT 3290 performance on the forum.

  1 can one suggest a good compatible replacement or upgrade?

  2 HP suggest a compatible replacement? How? Where?

  Laptop model: HP ENVY 15 j040el

  Country: Italy

  OS: Windows 8.1 (64-bit)

  Processor: Intel core i7-4700MQ, 2.40 gHz

  RAM: 12 GB

  HARD drive: 1 TB

  Warranty: due September 2014.

  The module that I suggested is compatible. It is the same physical size and has 2 antenna connectors it will be a matter of popping the old and jump into the new and replace the son, and then to load the driver. I don't know how you burn a wifi card but I mean it is also dual-band 2.4 and 5 ghz 7260 AC if that is a problem for you maybe, my advice would be different.

  2 x 2 vs 1 x 1 designates the number of streams from radio to the card. 2 x 2 is better.

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

• Qualcomm, atheros AR9285 802.11b/g/n wifi adapter problem

  Hi, if I can connect to the internet, but after a bit, I'm disconnected from the network. When I have the Troubleshoot, it indicates that there is a problem with my card. It is not a problem with my network as all other devices work correctly.

  I use Windows 8; my laptop is a Pavilion dv6 - 3284ca; my wifi adapter is qualcomm, atheros AR9285 802.11b/g/n wifi adapt

  Let me know if you need more information.

  You can try a USB wireless adapter. If it works, which will restrict the cause root. If it doesn't, it will restrict the issue to a conclusion. There is not a lot of troubleshooting on the left that you don't want to, so I think that an adapter is a good idea.

  Mario

• HP EliteBook 2170p Wifi adapter problem

  My Elitebook 2170 p (Intel Centrino Advanced N6235) wifi adapter has a hardware problem, the driver is up-to-date. What should I do?

  Hello

  If it's a hardware problem confirmed, please contact personal HP for the service of the PC and have replaced defective parts.

• Unhappy with Ralink RT3290 h9 wifi - 1440t

  I received my new PC of office h9 - 1440t yesterday... and I love... except for one thing.  I "upgraded" to the Ralink RT3290 wireless adapter, and it seems to get a bad reception.  My old HP laptop a lot better (5 bars) in the exact spot even on my desktop as RT3290 (3 bars).  Download / upload speeds are clearly and obviously more nits with the RT3290.

  Question for HP - be remedy you this somehow?  I should get a good reception for the money paid for this system.

  Edit - also - just checked using speedtest.net - download speed with the RT3290 is less than 10 Mbps.  My old HP laptop, at the same time, gets 23 Mbps.  Something is wrong.  It is a PC game and I need fast internet.

  Thanks for any help.

  Hello:

  It is a forum of consumer to consumer.  No HP will answer your question in an official capacity.

  You will need to contact HP technical support to see if there is something that HP can do to remedy to the issue that you are experiencing.

  A recommendation for help in hand to hand, see if installing the latest Ralink driver for your card help model.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&swItem=ob-116957-1&prodNameId=5229457&swEnvOID=4132&swLang=13&taskId=135&mode=3

• 2230-N-Intel wifi adapter problem. stops on the map

  I just bought a laptop HP 17-j029nr.  He has a wifi card intel proset N-2230.  I have already returned your laptop under the return policy of 3 weeks for the same problem.  I didn't know what was wrong, then I discovered that the issue on the last day I could return it, so that seemed to be the best course of action.  The new laptop began to have much faster than the previous issue.

  The problem seems to not have a link with the windows updates, but not spend 8 to 8.1.

  In the beginning, everything is normal.  Good solid connection on my network for this device and all my devices.  Then, I lose the internet connection.  On the notifacation of wifi, there is a!, open it and it only shows my network, and it said limited.  I can ping all other computers on my network or my gateway, it seems that there is not any connection at all.  If I disconnect, then says no available networks.  A reboot will get me back online.

  Everything's fine again for 10 minutes up to 2 hours.  Then he repeats, said I have a metered, but I have no connection, and I have to reboot for it to come alive.

  A google search reveals that this is not a problem rare, nor specific to HP laptops.  He also had a decent knowledge base of solutions I've tried, all to nothing does not.

  I tried a few different versions of the driver.  First, I tried the latest version of the driver.  Then I tried all the drivers that were made for windows 8.1 64-bit.  I came across an ad that suggested using the Intel PROSet/Wireless WiFI connection utility.  I defy anyone to get this application installed right the first time.  My limited knowledge of windows 8.1, my networks are managed by this application.  The only reason why I believe that it is because it runs in my sandbox, and if I right click on it, it gives me the possibility to 'use windows to manage wifi"yet, my windows wifi Manager runs as well.  I can't understand how to disable wifi management service without disabling other services necessary to use the card.  So, Yes, I have something not configured correctly, but the behavior I get is the same.  After some time, whatever it is, makes my life hell, continues to occur.

  Any thoughts on why this is happening?

  Being a miniminalist, I try to remove all the junkware that comes with the computer.  One of the things that I removed has some star power demand.  He had the blue background with the White Star, the standard "Energy Star Rated" sticker on a device, you will see.  A quick search online doesn't have reviel a lot on the application, but immediately got me into the hell of Googling turning all kinds of results I don't care at all.  So I removed the program.

  Earlier I was in the properties of the device and I noticed the power management tab and behold, it has been verified to allow the computer to turn off the device to save power.  I don't know if this is the solution, but at least it's something.  I will update, and I promise with something better than, "nevermind, fixed it.

  -L' sad HP user

  New adapter wifi solved the problem. Too bad HP support sucks so I have to use different elements to get the machine to work.

• Pavilion p7 - 1108p wifi adapter problem (running 8.1 Win)

  Expanded and published, the lack of resolution...

  Pavilion p7 - 1108p, running Windows 8.1.   Adapter Wi - Fi keeps releasing sporadically and without apparent reason.  I opened the network and sharing Center, and under active networks, click connections, and then click diagnose.  It resets the adapter and all is well.  I have two other computers and a tablet on this network, and none of them has this problem.  Please advise what the question might be: I have something set wrong?  Do I have a hardware problem?

  More info: when I use the troubleshooting tool to diagnose and reset the network card, I get 1 of 2 messages.  It's either.

  "" Wi - Fi"is not a valid IP configuration",

  or a message to both parties,

  "The connection between your access point, router, or model of cable and the Internet is broken. ” ;

  "The default gateway is not available "

  Please advise as soon as possible, because it is critical for having us this machine on-line 24/7. Thank you!

  You are the very welcome.

  If you have the problem fixed in a hurry, I'd consider having a network adapter wireless usb external of your choice.

  I use the Linksys AE3000 adapter dual band usb wireless with my HP 8200 Elite CMT on W8.1 64 bit and it worked without problem for months.

  It works great using the drivers W7 that accompanies it.

  Otherwise, you will have to wait for who knows how long for Mediatek fix the driver.

  You can disable the card in the Device Manager or physically remove it from its support if you want to add a usb wireless network adapter.

  Some of the reviewers said it did not work with W8/8.1, and some have fact.

  All I can say is that I had no problem to use drivers W7 supplied on mine.

  http://www.Newegg.com/product/product.aspx?item=9SIA24G1E39247&cm_re=AE3000-_-33-124-477-_-product

  Or you can get other brands...

• WiFi adapter and its driver

  Last week I bought

  HP 1000-1411TX on ebay.  It has Wireless 802.1 b/g/n. What is the driver for this card wifi to the discovery of wifi networks in my laptop.

  Hello:

  You need this driver for your laptop wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123851-1&cc=us&DLC=en&LC=en&OS=4132&product=5437444&sw_lang=

• Qualcomm Atheros AR9485 Wifi adapter closes unexpectedly after Windows updates

  We have a HP laptop, experiencing repeated problems with the AR9485 of Qualcomm Atheros 802.11b/g/n WIFI adpter following updated Windows.  Since we can not get online, we are unable to update the drivers.  Provides basic troubleshooting "Wifi adapter is experienceing driver or hardware related problems.  The device status shows "this device cannot start (Code 10) Operation Failed."  Any suggestions?

  Hello:

  Download this driver... Do not run it immediately.

  This package contains the driver installation package for LAN Qualcomm Atheros QCA9000 wireless controller series in models of laptop support and operating systems.

  File name: sp70859.exe

  Go to Device Manager and right click on the map the problem wireless.  Select uninstall.  Check driver uninstall, reboot and now the driver I posted and see if it works.

• Pavilion dv6-6121tx: driver Ralink upgrade rt5390 802.11b/g/n wifi adapter with Intel Dual Band Wireless-AC 7260

  Hey guys,.

  Currently, I have the HP Pavilion dv6-6121tx Entertainment Notebook PC with the configuration below.

  Name: HP Pavilion dv6 Notebook PC
  OS: WIN 7 Home Premium 64-bit
  Processor: Interl (R) Core i7-2630QM CPU @ 2.00GHz
  RAM: 6 GB DDR3
  Graphics card: Radeon (TM) HD 6770 M 2 GB DDR5

  My laptop has a Ralink rt5390 802.11b/g/n wifi adapter driver and I want to spend with Intel Dual Band Wireless-AC 7260. I went through the below URL containing all compatible drivers. But I am not able to understand where the AC7260 from Intel is supported or not.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-6100-entertainment-notebook-PC-serie...

  Anyone of you can guide me on this please. Thank you.

  Hello @Amjadbrsc,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about WiFi drivers and wanted to help!

  All the network drivers compatible for your product is listed under the tab Driver Network , the customer support of HP - page Software and Driver Downloads.

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great weekend!

• BT not detected after update BIOS and windows 8.1 & wifi adapter with envy J000 Touch series (J001tx)

  Hi, I have an Envy Touchsmart J001 TX laptop.  I've upgraded to 8.1 Windows a few days back and my pc was working fine. Yesterday, my WIFI and Bluetooth stopped being detected.

  I checked Device Manager and it does not show the adapters. My system has BT Ralink and Realtek wifi b/g/n.

  Restart the system, WiFI present themselves and worked normally, but on next reboot disappeared again.

  The physical plane mode button is orange and pressing or off change in the status of shows like airplane on or off but the notification area icon mode shows no change.

  The network and sharing Center shows not router WIFI in the settings of the card and even the menu of configuration of Windows 8 don't tell no detected wirelessadapter.

  I've updated my drivers and even my BIOS. Earlier I got the version of BIOS INSYDE F.24 and current installed BIOS is INSYDE F.53. Here is the log file in the folder SWsetup containing the unzipped BIOS file. I think that the BIOS is not installed correctly. Please analyze the log file and do not tell if you see something wrong.

  Has anyone else had a similar problem with the update of the BIOS, or with WIFI after Win 8.1 update?

  -Log started: 2014/04/16 19:50:11
  Initializing...
  Log file: c:\SWSetup\SP65654\InsydeFlash.Log
  Settings file: c:\SWSetup\SP65654\platform.ini (found)
  Executable: c:\SWSetup\SP65654\InsydeFlash.exe
  Version: 4.5.6.1 build: InsydeFlash
  Date: Mon 21 Oct 13:11:30 2013

  Resource file: c:\SWSetup\SP65654\iscflash.dll (load)
  Application name: InsydesFlash
  Information of the operating system: Microsoft Windows 8 - supported
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  IHISI Version: 204
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  M - FD has achieved:
  01966.FD
  Offset: 7380688
  Allow Version: 000, Dex: 0
  Current version: F.24, Dex: 3876
  Current BIOS version is greater than the version installed in the Ini.
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  M - FD has achieved:
  01966.FD
  Allow Version: 000, Dex: 0
  Current version: F.24, Dex: 3876
  Current BIOS version is greater than the version installed in the Ini.
  Partition: 1 WMI 0x0D: 1
  Check the package: 1
  Sign of the BIOS: 1
  BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
  Sign of the file: 1
  Open file c:\SWSetup\SP65654\01966.fd
  No sign of present
  Reading 8388608 bytes of the file starting with 0...
  The BIOS image size: 8388608 (0 x 00800000)
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
  non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

  Preparation stage

  Error code: 3010 (0x00000BC2)
  Cleanup phase
  Step completed
  -Newspaper arrested: 2014/04/16 19:50:55

  -Log started: 2014/04/17 22:05:35
  Initializing...
  Log file: C:\SWSetup\SP65654\InsydeFlash.Log
  Settings file: C:\SWSetup\SP65654\platform.ini (found)
  Executable: C:\SWSetup\SP65654\InsydeFlash.exe
  Version: 4.5.6.1 build: InsydeFlash
  Date: Mon 21 Oct 13:11:30 2013

  Resource file: C:\SWSetup\SP65654\iscflash.dll (load)
  Application name: InsydesFlash
  Information of the operating system: Microsoft Windows 8 - supported
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  IHISI Version: 204
  M - FD: 0 0 0 2 does not match FFFFFFFF & 1963103 C! = 1962103 C
  M FD: Match!
  M - FD: FD name 01966.fd
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  M - FD has achieved:
  01966.FD
  Offset: 7380688
  Allow Version: 000, Dex: 0
  Current version: F.53, Dex: 3923
  Current BIOS version is greater than the version installed in the Ini.
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  SearchVolumeFileAndCreateDirectory
  M - FD has achieved:
  01966.FD
  Allow Version: 000, Dex: 0
  Current version: F.53, Dex: 3923
  Current BIOS version is greater than the version installed in the Ini.
  Partition: 1 WMI 0x0D: 1
  Check the package: 1
  Sign of the BIOS: 1
  BIOS size: 0 x 00800000, SHA1 sign size: 0x00000000, SHA256 sign size: 0x00000100
  Sign of the file: 1
  Open the file C:\SWSetup\SP65654\01966.fd
  No sign of present
  Reading 8388608 bytes of the file starting with 0...
  The BIOS image size: 8388608 (0 x 00800000)
  sH19Infor.dwBootBlockInfo: 10 d
  Check of sign of starting block: 1
  The status of function block start: 4
  Lock status of the EC: 8
  Sign checks number of items: 0
  BBL level: 2
  Current BID: 0008EFA0, new BID: 0008EFA0 size of BIOS: 00800000
  non_shareEC Ec starting address: 00000000, end of Ec address: 00000000, current size: 00010000, new size: 00010000

  Preparation stage

  Error code: 3010 (0x00000BC2)
  Cleanup phase
  Step completed
  -Newspaper arrested: 2014/04/17 22:06:11

  Problem solved with the permission of edsilha response: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Wireless-button-stays-orange-Will-not-turn-on/m-p/914285

  HP technical support comes to walk me through the resolution of this problem.

  1. remove the battery and unplug the power supply

  2. press and hold the power on button for 30 seconds

  3. allow battery but to plug the power unit in

  4. Press power button, then press the f10 key immediately (a number of times)

  5. the bios Setup menu appears

  6. select Reset default values

  7. Select Save and exit

  System boots and the wifi key changes from orange to blue

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul

• Machine E says there is a problem with the microsoft virtual WiFi Miniport Adapter driver

  We changed the BT home hub-2 optical fiber broadband home hub-3. Since that I can't connect to my Epson 600 series printer wirelessley more. When going to add the printer in devices, he showed a problem with my e-machine. Re - install the driver does not solve the problem. any ideas?

  Hello

  What is the operating system installed on your computer?

  Please uninstall and reinstall the virtual WiFi Miniport Adapter and check if it works very well.

  a. press the Windows key + R

  b. in the Run dialog box type devmgmt.msc, and then on enter.

  c. expand network connections.

  d. right-click on wireless connection

  e. click Properties.

  f. click on Virtual WiFi Miniport Driver and click on uninstall.

  g. restart the computer.

  For all windows questions do not hesitate to contact us and we will be happy to help you.