HP 2000-2d62sr after installation windows7 is not wifi adapter

Similar Questions

• HP 2000 2116 - YOU: Installation starts is not after the Extraction of the driver installation

  Hello

  I just installed Windows 7 Ultimate 32 Bit OS. After installation, I downloaded all the files required from the Internet HP website driver installation.

  All the drivers have been installed end, except for the Wifi card.

  When I start to install the wifi driver, after extraction of the file in the "Swsetup" folder in the C drive, installation does not start. I don't know what to do.

  Help, please.

  Hello:

  You install the correct drivers?

  The BOM indicates that your laptop comes with the 9485GN 1 x 1 WiFi 802.11b/g/n Atheros card and Bluetooth 4.0 3012 combination, then that would be the drivers you need for the wireless and bluetooth...

  http://PartSurfer.HP.com/search.aspx?SearchText=B8N01PA

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp56572.exe

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  File name: sp56573.exe

• After installation that does not display the icon clipmarks, installed twice

  Sometimes, back my icon disappeared, uninstalled and reinstalled clipmarks, twice, but still an icon will not appear. Impossible to use.

  This has happened

  Each time Firefox opened

  == Did not notice until about a month ago

  You can also try to delete files (extensions.rdf, extensions.cache, extensions.ini) extensions.* and compatibility.ini in the Firefox profile folder to reset the extensions registry.

  See "extension corrupted files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

  If you see disabled extensions are not compatible on the next departure in "tools > Modules > Extensions" and then click "Find updates" to do a compatibility check.

• New installation of Windows 7 wifi adapter not

  I have fresh installed Windows 7 to Windows 8.

  My pc is a dm4-2102eo and was born with Windows 7, so I tried windows 8 for a long time and now I finally decided to go back to Windows 7, because Windows 8 is not me. I asked in the official disc of windows 7 and installed it.

  But when it's done I didn't have no driver at all, so I downloaded all the drivers in the support page for my pc, but I still haven't any of WI - FI adapter and my ethernet port works.  What can I do to fix this?

  Good day.

  Hello

  For some reason the driver for this device (Intel Centrino Wireless - N 1030) does not appear on your downloads page - try the driver on this link.

  http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53540.exe

  Kind regards

  DP - K

• difficulty playing legoland after installation

  I'm not smart computor. I was passed from one site to the other.  I had to download or join program after the program. All I want to know that's why after installation legoland will not PLAY. I have windows vista

  Hello

  . Thanks for your input, greatly appreciated.  As for legoland is not not compatible with Vista it says on the box "works with Windows Vista Xp/Me/98.

  I'll try and follow your advice, but again once I get intimidated and easily frustrated when I go from one site to the other. A site told me that my drivers have been exceeded. I don't have a clue!

  I was told to download the version of directx 2007 or higher, and then I wouldn't have a problem. I thought I tried, but several sites have been added to my computor so I deleted it after that the match has not yet played.

  Yet once again, I'll try and follow your advice and research sites listed. Thanks much for the tips

  Hello

  If it is said that it is compatible with vista, I suggest you follow my original advice all reposting in forum vista games

  they are experts in this field

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-gaming?page=1

• Cannot open the Adobe extensions even Manager after installation

  I downloaded and installed Adobe Dreamweaver CS6. As I was not able to find server behavior, bond and database options in the drop-down window, I tried to install Adobe Extension Manager CC in my Windows PC. After installation, I am not able to see them in Dreamweaver CS6. I was able to install the CC extensions Manager, but not able to open. Could someone help please?

  CC2015 no longer uses an Adobe Extension Manager of product. That you downloaded is not compatible with your version of DW, even if it is open, it wouldn't help.

  In CC2015, you must install the extensions via third party EM (not available through Adobe), use the creative cloud desktop application, or a command line installation process.

  DMX Zone has an EM you can enter: http://www.dmxzone.com/go/22670/dmxzone-extension-manager-for-dreamweaver/

• WIFI adapter does not work and can not be detected

  Hi guys,.

  I use HP Pavilion Dv4 3106tx. I don't know what happened, but out of no where my wifi sort adapter stopped working. whenever I have activate my wifi button, bluetooth doesn't work and does not display the icon of wifi which usually shows at the bottom right of the taskbar. I also checked Device Manager > network adapters, the wifi card is not there. I also tried "Search the hardware changes", but still there is not Wifi adapter appears.

  Right now I'm just connect via ethernet for internet connection because my wifi does not work.

  Can you help me out here guys...

  Thank you!

  Hi @pooroontong

  Welcome to the Forums of HP Support!

  I understand that your wireless network is most obvious in your systray or in Device Manager. I'm happy to help you.

  The first thing to do is to take a look at this page which deals with the problem you describe. Try it and let me know if you need help most.

  Universal solution WLAN, Wireless and Wi - Fi errors

• I am trying to install a scanner treated after installation failed previously and I get the message "Could not open key".

  Could not open key

  How can I give me access to a registry key?  I am trying to install a scanner treated after installation failed previously and I get message "could not open key: UNKNOWN\Components\AFlE7E2767BA2BB41B713A00FB8FACC4\4D7CB2A83D7A5D543B2D9374815CC314.» Verify that you have sufficient access to that key...

  Click Start, type: regedit

  Click with the right button on regedit

  Click on run as administrator

  Make sure that you back up your Windows registry database before you try:

  How to make a backup of the registry in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• I accidentally deleted iPhotos after installation of El Capitan and were not able to download or reinstall.

  I accidentally deleted the iPhoto app on my new mac after installation of El Capitan and are not available for download, except the updates, which obviously doesn't work. How can I get that back?

  You can probably not - most likely, you will need to switch to Photos (what would happen sooner or later anyway)

  Have you looked under purchases in the app store?  Can't update iPhoto because it is not available in the App Store

  If it is not there you can try reinstalling iPhoto 11 of the original source and the upgrade to 9.6.1 but I doubt it will work

  Or you can try to restore your backup from just before you shape did this error

  Good luck

  LN

• Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Have you looked on the Lexmark web site for help? There is a firmware download here:

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=Z33_COLOR_JETPRINTER&segment=support&UserLocale=en_US&FromPage=null#1

  Are you sure that your printer is the default in the printer folder? You can print a test page?

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• Microsoft LifeCam does not work after installation

  Software will not launch after installation.  Running Version 3.6 on XP SP3 OS.

  Hello

  ·         Have you been able to use the cam of life on the system before?

  ·         Where you installed the software and the drivers from?

  ·         Do you have an error message when you try to run the software?

  If you try to install the drivers on the CD/DVD and then, I would you suggest to uninstall the drivers and the software that is present on the system and then download the drivers and software on the Microsoft site and then install on the system and check if the problem is solved or not.

  For Windows XP 32 bit:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=RKA-00001&OS=XPSP2x64&lang=en

  I suggest you to return the items mentioned below.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

  http://support.Microsoft.com/kb/933311

• Not able to boot up normally after installation of Service Pack 3.

  Original title: I am trying to download Windowes XP SP3.

  I am trying to download Windowes XP SP3. After installation and reboot my computer only allows me to start in safe mode. It seems that I don't suystem for SP3. Also, in safe mode, it says I can solve problems by going to the Control Panel, but does not give any other direction on what to fix.

  Hi TimWaldal,

  What is the exact error message that you receive in safe mode?

  It seems that Service Pack 3 is not installed correctly.

  (a) that you try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.