m/silver requires floppy disks for backup can it be changed

Similar Questions

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• Try to use the ASR backup, but my computer doesn't have a floppy drive - is possible to move that requires a floppy disk for automatic recovery disk?

  With the help of Windows XP Professional
  Do the backup as a prerequisite to installation of SP3

  Transfer your question here instead: http://social.answers.microsoft.com/Forums/en-US/xpperformance/threads

  That being said...

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost you 59 US$ per incident now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• need to floppy disks for starting a factory reset

  Hi, I need to get the diskettes to install for my sony vaio labtop model PCG-71211 L. can you help me. Bob

  Hello

  PCG - 71211L # is the code given by Sony hardware configuration.

  What is the model # computer? Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  However, you can buy the Sony parts recovery discs and accessories team:

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/contact_us.jsp

  Authorized Sony parts distributor:

  http://eSupport.Sony.com/us/Perl/support-info.pl?info_id=927#place_order_9

  If my post answered your question, please mark it as an "accepted Solution".

• needing a floppy disk for windows 7 64 for a 7 presario cq57 windows installations

  Help! My laptop Presario CQ57 was in the middle of doing some updates when I had a power outage and now it won't do anything except tell me that I need a Windows installation disc. Where can I get one?

  Hello

  You are welcome

  If you use the recovery Kit, you won't need the product key - activation occurs automatically.

  Kind regards

  DP - K

• Space required for backup to disk more files

  How can I increase the space in my Recovery(D:) parce que je veux sauvegarder plus de fichiers.) I get the message disk space insufficient, even after a cleanup is performed.

  I free 173KO in my OS (c :)) can I transfer some of it to (D), who has only 9.99 KB.
  Thank you very much

  The recovery was put there by your OEM for the recovery of a factory default state.

  Buy an external USB disk for backup on.  Backup to the same disk hard physics is not a backup, if the hard drive dies, you lose your original and all backups.

• Installing guest OS of multiple images of floppy disks - is it possible?

  I'm really frustrated with problems installing on Workstation 7.1.3

  The problem that I am facing is that my Dell machine is not a floppy drive.

  And I discovered (after the fact) that a USB floppy drive is not supported under

  VMware workstation as peripheral startup, even if it seems to start,

  but it fails during the operation.

  So I created images of floppy disks for my old WinNT and DOS 6.22 OS', but I can't

  find a way to switch between images of floppy disks during the installation.

  Please tell me that this is possible and I'm just on something,

  otherwise, I think that there is a major gap in Workstation 7.

  Any help in this matter is greatly appreciated.

  -alex k

  It's possible - but much more advanced, then exchange of floppy-images

  the procedure I mentioned should work - or it really is a new flaw in WS 7.

  I've done this countless times with older versions

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• Error ""A required CD/DVD device driver is missing. " If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now.

  OriginalTitle:lack drivers

  I change my ubuntu to Windows 7, but "A required CD/DVD device driver is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now. Note. If the windows installation media is in the drive, you can remove it for this step. "what I can do about it?

  Hello

  Are you able to boot to the Windows Vista operating system?

  Read the following article and see if that helps:

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk:

  http://support.Microsoft.com/kb/952951

• Disable the requirement of password for the network disks

  I have a LAN with Windows XP Pro and Vista computers. With some effort, all computers can see, edit and manage files on other computers. There is also network disks (that is, directly connected to the network; no computer) used for backup and storage.

  None of the computers or readers in network has a login password or user name. I intend to keep it that way. (Think of the bucolic neighborhood where no one locks doors and there is no flights.)

  Since the Vista (Ultimate) computer, when I try to back up to a network drive, Vista insists on a user name and password. But there is not. So, I can't back up to a network drive (although in Windows Explorer and the command prompt, I can write and manage networked computers and disks without problem). I was not able to find a way around this obstacle.

  I put the Vista computer is not to require a password (network and sharing Center > sharing and discovery > sharing protected by password = Off). But that seems to focus on the incoming requests (from other computers to access the Vista computer) but no outgoing requests (Vista to get access to other computers and readers). Affecting the security of the files and folders on other computers and network disks to everyone = control total (in other words, anyone who can physically access the disc should be able to write to it) did not solve the problem.

  I assume that there is a simple solution. I would be grateful for help. (Remember that the parameter/allocation of passwords is not a solution).

  I don "t know precisely how to do what you ask for - there is no commands or settings I am sensitive to this address. It can probably be done with a registry fix, but I looked and could not find one.

  I found the following solution suggested in another forum and it was the only one who seemed to avoid the need for name of user and password (or failed to mention this requirement and exists).  It may not be the same as your situation is a Win Server and so maybe a field rather than a working group, but it seems worth a try.  To be honest, I don't know yet if the command applies to your situation and can not test it with my system - but who will know soon enough. If it allows you to, maybe the location of the network password will give you tips on how to make various adjustments that will work in your situation.  I would be cautious about deleting all references without making a note of them so they can be restored if she doesn't and perhaps is still problematic.  I would also create a system restore point right before starting this process to be on the safe side.

  With the a2x compliments of http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/ :

  For what it's worth, I had this works when you connect a Vista client to Win Server 2003 R2 SIN.  I had the same questions as everyone else here, but ultimately what worked for me was of typecontrol userpasswords2 in the command run on the Vista client and go into the Advanced tab, then on manage passwords.  I found references to the NAS (DNS names, ip addresses) and removed all.  Then I disonnected all drives mapped to the SIN of working.  Then I traced the drive that I was going to use for backup by using the network card function first and that worked (I used the mapping of IP).  Then I went into the backup and restore and it said it was on a network drive and typed in the path (once again using an IP instead of a server name) and he was able to see the drive and I would like to choose what to backup, etc. and it worked.

  I hope this works.  If this isn't the case, after return and I'll investigate more trying to find a solution (if any).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• How can I retreve information from a floppy disk

  I'm currently retreve information from a floppy disk, as did several diskettes that I already checked information on configuration for some time, so when I double click on the floppy icon drive I get this dialog box indicating that I need to format the drive, as just about anyone who knows that by formatting the drive you lose Information that is on it.

  I have no idea why you posted this in the Feedback forum, to post comments abou the Microsoft Answers website, is not for technical questions.  I moved your post to the Windows forum "files, folders, and search.  Please come back to your thread, click on modify just below, change the drop-down list for the Windows Version to indicate which version of Windows you are using, and then click on submit.

  Magnetic media is not always given.  Chances are good that the information deteriorated over time.  In addition, the alignment between the diskette and the drive may be incompatible, which means that even if the data is still there, your floppy drive won't be able to read it.

  The first thing to do is to try another PC with a floppy drive to see if it can read the disk.  If it cannot, you are screwed unless you want to pay a data recovery company to get the data.

• backup system required a disk... How to use a CD?

  G ' Day, I run XP SP3 and Office 2007. When you run a full backup of the system, I wonder to insert a floppy disk. I have not seen a floppy because Noah wear shorts. How can I change the system to request a CD-ROM. sincerely, Bob

  I don't think it's possible. The program you are using is very old, when all THE PCs have the floppy drives.

  Instead of using the built-in XP Backup program to perform a full backup of the system, do you a favor and use a better program like Acronis True Image or Paragon Backup System.

• I can't delete a file on my desktop. I have the following message: "this action cannot be completed because the file is opened in the floppy disk Bus Service" Please help?

  I don't know what Bus Service floppy disk on my computer, I had a friend install a game I wanted to even out of its hard disk of his computer in his home. How can I remove this file, I deleted all the related files through the control panel to uninstall programs feature... I am at a loss. Help, please!

  Hello

  DiscSoftBusService.exe is linked to the bus floppy disk floppy disk service Ltd. it is related to DAEMON Tools software.

  You can check at the place.

  Installation folder: C:\Program daemon tools ultra

  If you want to uninstall, you can track the location for the uninstall program.

  Uninstaller: C:\Program Daemon Tools Ultra\uninst.exe

  Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

• Order for the disk to backup ASM, OCR and vote in RAC HP - UX Itanium for upgrade

  Hi gurus,
  I plan to upgrade my Database 10.2.0.1 to 10.2.0.4 that is in a CCR on HP - UX environment. OCR, the voting record and ASM are in the RAW file system. I need to take backup of these (OCR, voting disk, ASM). Can you please share how to take backup of these before upgrading?
  
  
  Kind regards
  XIC
  
  Published by: XIC on 6 April 2013 20:25

  Here you go...

  For the voting disk backup

  http://www.reachdba.com/showthread.php?348-voting-disk-backup-and-recovery

  For the backup of the OCR

  http://www.reachdba.com/showthread.php?346-backup-of-OCR