M225dw LaserJet MFP Pro: MFP M225 DW wake

Similar Questions

• HP LaserJet MFP M225-M226 Pro

  my HP LaserJet Pro MFP M225-M226 impression in both sides of the paper all the time,

  I have a network and all network users printed as bothside of the paper, I need solution to print without bothside coppies.

  Thank you

  I think that all LaserJet Pro M225 and M226 printer models are compatible on the network (i.e. have ethernet and Wi - Fi optional).

  He just point a browser at the printer's TCP/IP address and search for the appropriate configuration page.

• Wired and wireless at the same time HP Laserjet MFP M226dw Pro

  Hi all

  I'll put up an MFP HP LaserJet Pro M226dw.  Connected by ethernet with a static IP address.  I also want to connect to the wireless network but when I try I get the status message: not enabled.  Unplug the network cable in order to activate the wireless connection.

  To me, it sounds as if you may have either ethernet or wireless but not both simultaneously.

  Is this really the case?  AirPrint works however it is best to attach the printer to the wireless company.

  

  Thank you

  According to this guide "Getting Started", you cannot use both wireless and wired network connections at the same time with the LaserJet Pro MFP M225 or M226 models:

  

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• LaserJet MFP M127fw Pro: Easy Scan

  Hello

  I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

  Appreciate any help.

  Thank you very much

  I'm responding to and mark my own post as solved.

  The solution was simple and as always, was not a problem with the system as much as the operator...

  Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

  See you soon

  Stig

• The windows firewall settings 7 HP LaserJet MFP M127fw Pro

  Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

  A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

  Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

  and the printer goes to sleep...

  I am on a 3 MB connection WiFi ISP... I'm just too impatient?

  The firewall settings windows I have to do?

  Any ideas?

  Windows 7 Home Premium 64-bit

  Gigabyte Intel I7 W

  16 GB OF RAM

  Hi @CCcrider

  Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.

• HP laserjet MFP M125a pro: m125a

  Hello, I just bought a printer hp laserjet MFP M125a pro yesterday and during printing a document of 30 pages, I noticed the steam that comes out of the printer and the fumes forming. I have that it is quite normal on cheap laser printers that don't have a fan built in red (I assume that this printer has not), but again, this is not a cheap device. I'll try to get a new high of paper and see if it is still "steam". Does anyone have this problem with this printer?

  Thank you

  Bogdan Preda

  Hi @PredaBogdan,

  According to me, there is nothing to worry.

  HP has tested the performance of this product extensively, and this moisture is part of the normal operation of the product. The steam occurs because moisture condenses in the output area until the internal temperature reaches a level at which occurs without condensation.

  Thank you.

• HP LaserJet MFP displayed as HP LaserJet MFP M127nw Pro M127fw Pro

  I have a MFP HP LaserJet Pro M127fw. When I added printer with application code specified printer was a HP LaserJet MFP M127nw Pro. Is this a problem? I use MOSX 10.11.6 on a MacAir

  Hey @pfedwards,

  Welcome to the Forums of HP Support!

  I see that your range of printers Laserjet M127fw shows as printer Laserjet M127nw in connected HP. If the printer prints correctly via ePrint, it of a typo and has no effect on the operation of the printer.

  Please let me know if that answers your question or resolve your problem. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

  My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

  1. save my settings,

  2 tell the scanner if I want to do an overview of the control program to display,

  3 Let me drag a border to select the section of the preview I want scanned.

  4 tell the scanner to scan,

  5. display the scanned image or document,

  6 ask if I have another page in the same document,

  7. save the image or document where I want, with a name I go,

  8. save images in different formats,

  9 save documents in the .docx format, .tif and a few other formats.

  10. documents of OCR.

  My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

  Can anyone recommend such a program?

  Thank you.

  Hello

  Its specifications:

  • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
  • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
  • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

  Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

  Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

  For Windows, try it please:

  http://free-OCR-to-Word.en.softonic.com/
  http://www.free-OCR.com/

  for Word:

  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Good luck.

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• LaserJet MFP M277dw Pro: Windows installs its own printer driver after failure of wireless printer, print

  It is a problem really bizzare, I will try to explain as clearly as possible what happened:

  • I have 277dw LaserJet MFP Pro, which is connected to my PC via wireless network. I installed the drivers from HP and everything worked as a watch movement - printing and scanning.
  • Yesterday, the power is out for about 30 minutes. Computer stayed on thanks to UPS, but the printer power loss.
  • Once the power was restored to the printer, printer initialized and I was able to access his page of HTTP status without problems. All the parameters of the printer has persisted. Same IP address. Printer all self-tests pass. However, I have lost the ability to print (printer shows more as an option in the print dialog boxes). Scanner works as usual, save the scan to a network folder.
  • The State of device HP icon has disappeared from the taskbar.
  • A bunch of new entries titled "NPIF7BB8E (MP Color LaserJet MFP M277dw)" appears in the Device Manager. This 'new' device appears in the Device Manager 5 times under different categories of devices (see attached screenshot). In the Event Viewer, I discovered that Windows installed for this device right when the power has been restored to the printer.
  • Under control panel-> hardware and sound-> devices and printers, all devices installed by HP are grayed out and their status is not connected.
  • Restarting the computer does not resolve this issue.

  Anyone have any ideas on what is happening here? It's the second time this has happened - I was able to fix the first time by reinstalling the printer drivers. However, I don't want to have to do every time the failure. This looks like a bug in Windows or the drivers.

  Thank you!

  

  Hello

  Most likely your operating system is set to automatically install the drivers, when the lost connection the WPS driver build has been added.

  Try these steps and check if that helps:

  1. In Control Panel, select network and Internet.
  2. Open the network and sharing Center.
  3. Search your active network profile, it appears just below the name of the network (for example Private Network, work network)
  4. The side pane select change advanced sharing settings.
  5. In the profile category, uncheck 'automatically enable the configuration of the connected network devices '.
  6. Click on save to confirm.
  7. Devices and printers remove any element M277 printer), as well as Device Manager (remove the two original HP or WPS item, you should see is no longer the M277.)
  8. Once select start > all Apps > HP > HP Laserjet M277 and select the shortcut to reconfigure the device, it can appear as the printer software installation & connect a new printer, etc.

  Hope that helps,

  Shlomi

• LaserJet MFP M125nw Pro: m125nw-cannot install (Win 10)

  Hello

  I have a problem with the installation of the software in Windows 10.

  

  When I open Installer, departure from the ist and he carsh. HP install stop work.

  On another computer with Windows 7, everything is OK.

  I try to clean boot, it did not help.

  The printer works, I install the drivers manually, but I can not scan via LAN, only on USB (I have also manualny install HP Scan).

  HP Scan search USB printer.

  Can I install HP Scan somehow with settings for LAN? Or the entire installation.

  Thank you.

  In %TEMP%\hpbcsiInstallReport.log

  Started hpbcsiInstaller - 2016-07-26 09:46:32.0740 *.

  [2016-07-26 09:46:31.9235] - Info - title = HP LaserJet Pro MFP M125-M126
  [2016-07-26 09:46:31.9235] - Info - ProductName = HP LaserJet MFP M125-M126 Pro
  [2016-07-26 09:46:31.9235] - Info - InstanceBuildName = St_W_FWP_Fusion15_0_Release15188_1312
  [2016-07-26 09:46:31.9235] - Info - InstanceID = c65448bc-e467-4ec7-b4a5-246697f52957
  [2016-07-26 09:46:31.9235] - Info - InstanceVersion = 15.0.15188.1312
  [2016-07-26 09:46:38.4526] - Info - BootstrapFirstLaunchTimeSeconds = 3331, 0772926
  [2016-07-26 09:46:38.4686] - Info - InstallerVersion = 6.0.0.9362
  [2016-07-26 09:46:38.4686] - Info - OSVersion = 6.2
  [2016-07-26 09:46:38.4686] - Info - OSArchitecture = X 64
  [2016-07-26 09:46:38.4686] - Info - OSServicePack =
  [2016-07-26 09:46:38.4686] - Info - OSVersionString = Microsoft Windows NT 6.2.9200.0
  [09:46:38.8432 2016-07-26] InstallationId - Info - = F90C97CA-9F75-4403-B375-5A80BBE5E6CC
  [2016-07-26 09:46:38.8432] - Info - HWFirst = false
  [2016-07-26 09:46:38.8432] - Info - stimulus = false
  [09:46:49.6104 2016-07-26] - Error - Message of Exception unhandled: Inicjator typow zgłosił wyjątek dla typu "System.Windows.Media.FontFamily.
  -Error - [09:46:49.6104 2016-07-26] Unhandled Exception stack trace:
  w System.Windows.Media.Typeface... ctor (FontFamily fontFamily, FontStyle style, stretch weight FontWeight, FontStretch)
  o MS. Internal.Text.DynamicPropertyReader.GetTypeface (DependencyObject element)
  o MS. Internal.Text.TextProperties.InitCommon (DependencyObject target)
  o MS. Internal.Text.TextProperties... ctor (target of FrameworkElement, Boolean isTypographyDefaultValue)
  w System.Windows.Controls.TextBlock.GetLineProperties)
  w System.Windows.Controls.TextBlock.EnsureTextBlockCache)
  w System.Windows.Controls.TextBlock.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Border.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Grid.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Control.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.DockPanel.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Grid.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Grid.MeasureCell (cell of Int32, Boolean forceInfinityV)
  w System.Windows.Controls.Grid.MeasureCellsGroup (Int32 cellsHead, size referenceSize, Boolean ignoreDesiredSizeU, Boolean forceInfinityV)
  w System.Windows.Controls.Grid.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  o MS. Internal.Helper.MeasureElementWithSingleChild (UIElement element, size constraint)
  w System.Windows.Controls.ContentPresenter.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Decorator.MeasureOverride (size constraint)
  w System.Windows.Documents.AdornerDecorator.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Border.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Window.MeasureOverrideHelper (size constraint)
  w System.Windows.Window.MeasureOverride (Size availableSize)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Interop.HwndSource.SetLayoutSize)
  w System.Windows.Interop.HwndSource.set_RootVisualInternal (Visual value)
  w System.Windows.Interop.HwndSource.set_RootVisual (Visual value)
  w System.Windows.Window.SetRootVisual)
  w System.Windows.Window.SetupInitialState (Double requestedTop, Double requestedLeft, Double requestedWidth, Double requestedHeight)
  w System.Windows.Window.CreateSourceWindowImpl)
  w System.Windows.Window.SafeCreateWindow)
  w System.Windows.Window.ShowHelper (object booleanBox)
  w System.Windows.Window.Show)
  w System.Windows.Application. b__8 (Object obj)
  w System.Windows.Threading.ExceptionWrapper.InternalRealCall (delegate callback, object args, Boolean isSingleParameter)
  w System.Windows.Threading.ExceptionWrapper.TryCatchWhen (Object source, delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.Dispatcher.WrappedInvoke (delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.DispatcherOperation.InvokeImpl)
  w System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext (Object state)
  w System.Threading.ExecutionContext.runTryCode (object userData)
  w System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup (code TryCode, CleanupCode backoutCode, object userData)
  w System.Threading.ExecutionContext.RunInternal (ExecutionContext executionContext, ContextCallback callback, Object state)
  w System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  w System.Windows.Threading.DispatcherOperation.Invoke)
  w System.Windows.Threading.Dispatcher.ProcessQueue)
  w System.Windows.Threading.Dispatcher.WndProcHook (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  o MS. Win32.HwndWrapper.WndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  o MS. Win32.HwndSubclass.DispatcherCallbackOperation (Object o)
  w System.Windows.Threading.ExceptionWrapper.InternalRealCall (delegate callback, object args, Boolean isSingleParameter)
  w System.Windows.Threading.ExceptionWrapper.TryCatchWhen (Object source, delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.Dispatcher.WrappedInvoke (delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.Dispatcher.InvokeImpl (priority DispatcherPriority, TimeSpan timeout, Delegate method, object args, Boolean isSingleParameter)
  w System.Windows.Threading.Dispatcher.Invoke (DispatcherPriority priority, method Delegate, Object arg)
  o MS. Win32.HwndSubclass.SubclassWndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
  o MS. Win32.UnsafeNativeMethods.DispatchMessage (MSG & msg)
  w System.Windows.Threading.Dispatcher.PushFrameImpl (DispatcherFrame frame)
  w System.Windows.Threading.Dispatcher.PushFrame (DispatcherFrame frame)
  w System.Windows.Threading.Dispatcher.Run)
  w System.Windows.Application.RunDispatcher(Object ignore)
  w System.Windows.Application.RunInternal (window)
  w System.Windows.Application.Run (window)
  w HP. UserInterface.CSI.App... ctor (ILogger logger, IInstallManager installManager, IInstallerParams installerParams, IProcessStart processStart)
  w HP. UserInterface.CSI.ProductionGUI.Start)
  w HP. App.CSI.ApplicationLaunch.Start)
  w HP. App.CSI.AppStartImpl.Start (DIContainer, container)
  w HP. App.CSI.AppStart.Main (String [] args)
  [2016-07-26 09:46:49.6104] - Info - InstallStatus = FinishedFailError

  OK, I found the solution. One of my fonts have invalid timestamp:

  28820-12-28 08:17 52 272 TitilliumText25L.otf
  28820-12-28 08:17 52 736 TitilliumText25L001.otf
  28820-12-28 08:17 52 012 TitilliumText25L002.otf
  28820-12-28 08:17 52 064 TitilliumText25L003.otf
  28820-12-28 08:17 52 032 TitilliumText25L004.otf
  28820-12-28 08:17 49 904 TitilliumText25L005.otf

  https://support.Microsoft.com/pl-PL/KB/2978135

• LaserJet MFP M177 PCLmS Pro: live wireless

  We have a team who have several of the LaserJet MFP M177 PCLmS Pro.  As you would expect, whenever we use a USB connection with these printers that a new driver is installed for each printer.  I was wondering if I would need to install a different driver for each printer on the direct use wireless?  Or a driver will work on any printer that I am connected directly to?

  Thank you

  Welcome @ilibao,

  Thank you for your participation in the forums!  I see that you would like to know if you need to install a different driver for direct using wireless. I'd love to help you.

  You don't need to install a driver separated for use of live wireless.

  The HP Wireless Printing Direct allows you to print from your mobile device wirelessly on a HP wireless product active live without connection to a network or the Internet.

  Use HP Direct wireless to print wireless from the following devices:

  ● iPhone, iPad or iTouch with Apple's AirPrint or HP ePrint mobile app
  Mobile devices ● to run Android, iOS, or Symbian using HP ePrint home & Biz
  ● any computer compatible with any operating system wireless.

  I have as much manual with more information about using wireless Direct on page 32 of the printer: LaserJet Pro MFP M177.

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards