HP LaserJet MFP M225-M226 Pro

Similar Questions

• LaserJet MFP M177 PCLmS Pro: live wireless

  We have a team who have several of the LaserJet MFP M177 PCLmS Pro.  As you would expect, whenever we use a USB connection with these printers that a new driver is installed for each printer.  I was wondering if I would need to install a different driver for each printer on the direct use wireless?  Or a driver will work on any printer that I am connected directly to?

  Thank you

  Welcome @ilibao,

  Thank you for your participation in the forums!  I see that you would like to know if you need to install a different driver for direct using wireless. I'd love to help you.

  You don't need to install a driver separated for use of live wireless.

  The HP Wireless Printing Direct allows you to print from your mobile device wirelessly on a HP wireless product active live without connection to a network or the Internet.

  Use HP Direct wireless to print wireless from the following devices:

  ● iPhone, iPad or iTouch with Apple's AirPrint or HP ePrint mobile app
  Mobile devices ● to run Android, iOS, or Symbian using HP ePrint home & Biz
  ● any computer compatible with any operating system wireless.

  I have as much manual with more information about using wireless Direct on page 32 of the printer: LaserJet Pro MFP M177.

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards

• Color LaserJet MFP M277 dw Pro: Setup disk gives an error and stops before the connection to the printer

  Hello

  I try to install the printer 'Color LaserJet MFP M277 dw Pro'.
  By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.
  I use Windows XP SP3. It is always installed, but physically disconnected another printer hp (hp 2050).
  (I tried both to disable the antivirus that reduce to a minimal install, but the problem persists).
  Thank you

  Response thanks a lot.
  In the meantime, I contacted the Support of the Italy
  Who suggested that I try to update the driver.
  I downloaded the file "HP_LaserJet_M277_PCL6_Legacy_Print_Driver_14295".
  Automatic extraction and I launched and everything seems to work.
  (I still try to scan and fax if they work).
  Thank you very much.
  Thanks to your colleague Michelle with whom I chatted.
  Contact thank you for the support of Milan that I don't know the name.
  So, I can communicate the solution found.

• HP laserjet MFP M126 nw pro: the two printed side

  I use HP laserjet MFP M126 nw pro, how do I get the two side printing on one page automatically?

  Hello

  For small businesses:

  http://WWW8.HP.com/au/en/ads/LaserJet-MFP/LaserJet-Pro-MFP-printers.html

  and more (in English):

  http://h20386.www2.HP.com/AustraliaStore/merch/list.aspx?SEL=PRN&CTRL=f&fc_ptyp_multiinkp=1

  Kind regards.

• HP LaserJet MFP M-125 Pro has: MacBook Air connected to a Laserjet MFP Pro but does not print

  Hi, I'm trying to print from an HP LaserJet Pro MFP M - 125 bis, which is connected to a MacBook Air via a USB cable. The software has been downloaded and the print job is always show that if it is trying to print the given print job but no print is issued and the print job is considered fact. Can you please tell me what is wrong why the print outs coming out?

  Hi @Lilium,

  I see you are having problems printing via the USB connection. I would really like to be able to help solve this problem.

  Did you download and install the software solution full or run Upates Apple?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (LaserJet MFP M125a Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  How is the name of the printer listed?

  If the problem persists, try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you need help, let me know.

  Have a great day!
  Thank you.

• LaserJet MFP M477 cold Pro: MAC address for LajerJet Pro MFP M477 cold

  Could you please tell me where I can find the MAC address for LaserJet Pro MFP M477fnw?

  Hello Letitial

  The Mac address is simple to find 2 ways

  1. Go to the antenna wireless icon on the upper right of the screen and tap on it.
  2. Then press the Wifi network (On - Off) icon.
  3. Do scroll down and find the hardware address.

  That s how you get the Mac.

  The other way would be to print a configuration report and search for hardware addresses.

  • Drag the menu to the left
  • tap Setup
  • tap reports
  • Select configuration report.

    I hope this helps you!

• M127fw MFP: HP LaserJet MFP Firmware M127fw Pro

  I was not able to find the last update for the following printers:

  HP LaserJet Pro M127fw MFP

  I have checked in the product page and only the drivers and software are listed but not the firmware.

  I don't understand why would omit to anyeone, unless it is located inside the complete drivers, I do not see the listed firmware.

  I also have googoe it and found a site that has the fimware, but I don't know if it may contain a virus.

  If anyone knows where the firmware please let me know.

  Thank you

  Mario

  ikabil

  Here is the link for the latest firmware...

  Select the firmware. download it... Do not look after the OS... It's official site & you can trust to download... Before upgrading the FW pl read the read file me...

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-MFP-M127-series/5396666/model/5303419#Z7_3054ICK0K8UDA0AQC11TA930O2

  

  Good luck...

  

• Multifunction color HP LaserJet Pro 200: color HP LaserJet MFP M276nw 200 Pro analyzes issues with the new driver (Oct 2015) and El Capitan

  When I updated to the latest HP driver from the HP Support/drivers page, my MFP stopped scan from either a wireless network or directly connected setting.  It seems that if I scan the bed itself, I can scan when the print/scanning felt connected to my Mac, but the real problem is the document feeder.

  I also updated all THE updates Apple, including the HP Easy Scan application.

  When using the document feeder, the process initiated as it should... the first page scans, but does not appear in the HP scanning software... then 10 minutes later, the second page scan (same not result... no picture)... can I get a document could not load the error or something.  When this happens... I can't try to scan anything more until I have restart the MAC and printer.

  Hi @epbarnett70,

  I got a few comments on this issue. Please download and install the HP Easy Scan application to see if it will allow you to scan from the ADF. Use the app for Easy Scan HP.

  HP Easy Scan

• MFP HP LaserJet Pro M127fn: HP LaserJet MFP beep M127fn Pro

  Hello.

  I had this printer, but I had a problem. When I sent any job to the printer it is still a "beep". I have already disabled the alerts in the configuration of the printer, but the sound continues. Is it possible to turn off that noise?, it is very annoing to hear it. I appreciate your help.

  Hi @DiegoLuna,

  I read your post and see that when you send a job to the printer it "beeps". I want to help you.

  The printer should just do normal noises when printing or treatment, but not a beep sounds.

  You have the printer connected to a UPS power?

  I heard of this printers causing to make beeps sounds. Weird I know!

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  What was the Volume settings in the configuration Menu of the system you already disabled?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• LaserJet MFP M425dn 400 Pro: How to change manual feed

  I just installed the latest driver for this printer printing.  Now when I launched an impression he always asks me for manual feed.  How can I change it's automatic?

  Check the setting of the printer for the size and type paper for the paper tray.  Try to set to all and everything.

• HP LaserJet MFP M425dw 400 pro: cannot connect to the printer via USB

  Hello

  My problem is as follows:

  Since December 2014, the HP printer has been connected via USB to the desktop (at the time using windows 8.1) and by the network to other computers. The problem is with the 10 windows desktop where it is widely used for double-sided scanning.

  Yesterday morning I came only to find out that HP will not work in no case with Office for Windows 10 USB - connected, changed the ports that are 6, the cables, the office will say it is not connected. However, it connects through network for printing but not scan, it gives an error about Scanner HP not connected but will scan with Windows Scanner and fax with the printer using the scanner for the work of network folder - which can not scan two-sided.

  I uninstalled the driver, reinstalled with HP Support Assistant / downloaded directly from HP, same thing. The problem is that it be increased to 99% on the screen that shows the connection to the printer (the one detecting the USB cable) when it will say:

  "

  Error

  A Setup operation took too long to run. It is a fatal error, preventing the use of the product.

  If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. »

  I tried the original shipped with the printer CD, it gives the same error message.

  If anyone can help I will be very grateful. Thank you!

  Too bad! Fixed it myself using the Hp Smart Install supplied with the network interface of the printer.

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• LaserJet MFP M125nw Pro: m125nw-cannot install (Win 10)

  Hello

  I have a problem with the installation of the software in Windows 10.

  

  When I open Installer, departure from the ist and he carsh. HP install stop work.

  On another computer with Windows 7, everything is OK.

  I try to clean boot, it did not help.

  The printer works, I install the drivers manually, but I can not scan via LAN, only on USB (I have also manualny install HP Scan).

  HP Scan search USB printer.

  Can I install HP Scan somehow with settings for LAN? Or the entire installation.

  Thank you.

  In %TEMP%\hpbcsiInstallReport.log

  Started hpbcsiInstaller - 2016-07-26 09:46:32.0740 *.

  [2016-07-26 09:46:31.9235] - Info - title = HP LaserJet Pro MFP M125-M126
  [2016-07-26 09:46:31.9235] - Info - ProductName = HP LaserJet MFP M125-M126 Pro
  [2016-07-26 09:46:31.9235] - Info - InstanceBuildName = St_W_FWP_Fusion15_0_Release15188_1312
  [2016-07-26 09:46:31.9235] - Info - InstanceID = c65448bc-e467-4ec7-b4a5-246697f52957
  [2016-07-26 09:46:31.9235] - Info - InstanceVersion = 15.0.15188.1312
  [2016-07-26 09:46:38.4526] - Info - BootstrapFirstLaunchTimeSeconds = 3331, 0772926
  [2016-07-26 09:46:38.4686] - Info - InstallerVersion = 6.0.0.9362
  [2016-07-26 09:46:38.4686] - Info - OSVersion = 6.2
  [2016-07-26 09:46:38.4686] - Info - OSArchitecture = X 64
  [2016-07-26 09:46:38.4686] - Info - OSServicePack =
  [2016-07-26 09:46:38.4686] - Info - OSVersionString = Microsoft Windows NT 6.2.9200.0
  [09:46:38.8432 2016-07-26] InstallationId - Info - = F90C97CA-9F75-4403-B375-5A80BBE5E6CC
  [2016-07-26 09:46:38.8432] - Info - HWFirst = false
  [2016-07-26 09:46:38.8432] - Info - stimulus = false
  [09:46:49.6104 2016-07-26] - Error - Message of Exception unhandled: Inicjator typow zgłosił wyjątek dla typu "System.Windows.Media.FontFamily.
  -Error - [09:46:49.6104 2016-07-26] Unhandled Exception stack trace:
  w System.Windows.Media.Typeface... ctor (FontFamily fontFamily, FontStyle style, stretch weight FontWeight, FontStretch)
  o MS. Internal.Text.DynamicPropertyReader.GetTypeface (DependencyObject element)
  o MS. Internal.Text.TextProperties.InitCommon (DependencyObject target)
  o MS. Internal.Text.TextProperties... ctor (target of FrameworkElement, Boolean isTypographyDefaultValue)
  w System.Windows.Controls.TextBlock.GetLineProperties)
  w System.Windows.Controls.TextBlock.EnsureTextBlockCache)
  w System.Windows.Controls.TextBlock.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Border.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Grid.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Control.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.DockPanel.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Grid.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Grid.MeasureCell (cell of Int32, Boolean forceInfinityV)
  w System.Windows.Controls.Grid.MeasureCellsGroup (Int32 cellsHead, size referenceSize, Boolean ignoreDesiredSizeU, Boolean forceInfinityV)
  w System.Windows.Controls.Grid.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  o MS. Internal.Helper.MeasureElementWithSingleChild (UIElement element, size constraint)
  w System.Windows.Controls.ContentPresenter.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Decorator.MeasureOverride (size constraint)
  w System.Windows.Documents.AdornerDecorator.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Controls.Border.MeasureOverride (size constraint)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Window.MeasureOverrideHelper (size constraint)
  w System.Windows.Window.MeasureOverride (Size availableSize)
  w System.Windows.FrameworkElement.MeasureCore (Size availableSize)
  w System.Windows.UIElement.Measure (Size availableSize)
  w System.Windows.Interop.HwndSource.SetLayoutSize)
  w System.Windows.Interop.HwndSource.set_RootVisualInternal (Visual value)
  w System.Windows.Interop.HwndSource.set_RootVisual (Visual value)
  w System.Windows.Window.SetRootVisual)
  w System.Windows.Window.SetupInitialState (Double requestedTop, Double requestedLeft, Double requestedWidth, Double requestedHeight)
  w System.Windows.Window.CreateSourceWindowImpl)
  w System.Windows.Window.SafeCreateWindow)
  w System.Windows.Window.ShowHelper (object booleanBox)
  w System.Windows.Window.Show)
  w System.Windows.Application. b__8 (Object obj)
  w System.Windows.Threading.ExceptionWrapper.InternalRealCall (delegate callback, object args, Boolean isSingleParameter)
  w System.Windows.Threading.ExceptionWrapper.TryCatchWhen (Object source, delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.Dispatcher.WrappedInvoke (delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.DispatcherOperation.InvokeImpl)
  w System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext (Object state)
  w System.Threading.ExecutionContext.runTryCode (object userData)
  w System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup (code TryCode, CleanupCode backoutCode, object userData)
  w System.Threading.ExecutionContext.RunInternal (ExecutionContext executionContext, ContextCallback callback, Object state)
  w System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  w System.Windows.Threading.DispatcherOperation.Invoke)
  w System.Windows.Threading.Dispatcher.ProcessQueue)
  w System.Windows.Threading.Dispatcher.WndProcHook (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  o MS. Win32.HwndWrapper.WndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean & handled)
  o MS. Win32.HwndSubclass.DispatcherCallbackOperation (Object o)
  w System.Windows.Threading.ExceptionWrapper.InternalRealCall (delegate callback, object args, Boolean isSingleParameter)
  w System.Windows.Threading.ExceptionWrapper.TryCatchWhen (Object source, delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.Dispatcher.WrappedInvoke (delegate callback, object args, Boolean isSingleParameter, delegate catchHandler)
  w System.Windows.Threading.Dispatcher.InvokeImpl (priority DispatcherPriority, TimeSpan timeout, Delegate method, object args, Boolean isSingleParameter)
  w System.Windows.Threading.Dispatcher.Invoke (DispatcherPriority priority, method Delegate, Object arg)
  o MS. Win32.HwndSubclass.SubclassWndProc (IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
  o MS. Win32.UnsafeNativeMethods.DispatchMessage (MSG & msg)
  w System.Windows.Threading.Dispatcher.PushFrameImpl (DispatcherFrame frame)
  w System.Windows.Threading.Dispatcher.PushFrame (DispatcherFrame frame)
  w System.Windows.Threading.Dispatcher.Run)
  w System.Windows.Application.RunDispatcher(Object ignore)
  w System.Windows.Application.RunInternal (window)
  w System.Windows.Application.Run (window)
  w HP. UserInterface.CSI.App... ctor (ILogger logger, IInstallManager installManager, IInstallerParams installerParams, IProcessStart processStart)
  w HP. UserInterface.CSI.ProductionGUI.Start)
  w HP. App.CSI.ApplicationLaunch.Start)
  w HP. App.CSI.AppStartImpl.Start (DIContainer, container)
  w HP. App.CSI.AppStart.Main (String [] args)
  [2016-07-26 09:46:49.6104] - Info - InstallStatus = FinishedFailError

  OK, I found the solution. One of my fonts have invalid timestamp:

  28820-12-28 08:17 52 272 TitilliumText25L.otf
  28820-12-28 08:17 52 736 TitilliumText25L001.otf
  28820-12-28 08:17 52 012 TitilliumText25L002.otf
  28820-12-28 08:17 52 064 TitilliumText25L003.otf
  28820-12-28 08:17 52 032 TitilliumText25L004.otf
  28820-12-28 08:17 49 904 TitilliumText25L005.otf

  https://support.Microsoft.com/pl-PL/KB/2978135

• M225dw LaserJet MFP Pro: MFP M225 DW wake

  I installed a MFP M225 DW, which will not be every now and then to wake up when you send a print job, you must turn off the printer and then back on again, the print jobs that were sent then print ok and it can run then ok for a few days or a week, the printer is laeft on permantly... I went through the menu and checked everthing to wake up, I've updated the firmware to the last available on HP website

  It is connected via USB to a desktop pc and a wireless laptop both running windows 7, happens to these two machines... any suggestions appreciated

  Rob

  Sorry missed that one.  In this case...

  Your USB is off via Windows.   You just need to stop it.   Go here.

  http://helpdeskgeek.com/Windows-XP-Tips/prevent-Windows-from-powering-off-USB-device/

• Wired and wireless at the same time HP Laserjet MFP M226dw Pro

  Hi all

  I'll put up an MFP HP LaserJet Pro M226dw.  Connected by ethernet with a static IP address.  I also want to connect to the wireless network but when I try I get the status message: not enabled.  Unplug the network cable in order to activate the wireless connection.

  To me, it sounds as if you may have either ethernet or wireless but not both simultaneously.

  Is this really the case?  AirPrint works however it is best to attach the printer to the wireless company.

  

  Thank you

  According to this guide "Getting Started", you cannot use both wireless and wired network connections at the same time with the LaserJet Pro MFP M225 or M226 models: