M2ts file Audio Editing problems (CS5.5)

Similar Questions

• problems to capture the audio layer when you import the m2ts files

  Hi all, I'm new on the side of the entire video editing and so would be grateful for the help.

  I just bought a camcorder Canon HF200 HD, and a Sony Vaio notebook that came with Premiere Elements 7.0 preinstalled.

  Last month I've been shooting sequences and down just to try to change everything and set up a DVD.

  The problem I have right now (and I've just started using the program, so everything is new for me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported by first - no audio (it reads the file ok, no errors appear, but when I go to review images there is video but no sound).

  I can play all my videos in Windows Media Player very well, both video and audio.  So it seems that my machine is able to read the files correctly in this program.  However, it seems that the audio drop out when I import the file in first.  The program was pre-installed on my computer and when I have a look at the audio settings, it doesn't seem to be a possibility to change the settings to something different.

  So far, I've spent a long time googling and trying to find a solution, but without any joy immediately.

  Enjoy the anyone can offer any assistance.  Is it just a simple setting I need to change?  Or I have to somehow convert the files in a different format before Elements 7.0 can read?

  Thank you.

  Jeff

  the machine I have appear to be consistent with the specifications required by PE7 (and given that it came with pre-installed PE7 which should be the case).

  There are two things to consider:

  1.) edition of most of the images, especially material to SD

  2.) editing AVCHD, currently the most demanding of all popular video formats to edit. That's what you have.

  Now when you launch the pre, you get a splash screen. There you can open new create a new project, open an existing project that has been recently opened, or open a project by browsing to it. We can also leave.

  In your case, you go again and when the dialog box opens, choose the preset for AVCHD w / DD 5.1 SS Audio.

  Also note, that in the Edit Mode, there are two Modes of display (access via two icons to the left of the lower panel), view timeline and sceneline view. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back, but the timeline view Mode will give you infinite control. It is estimated that change the most programs use, and most publishers use.

  Good luck

  Hunt

  PS - I highly recommend Steve Grisetti book, The Muvipix.com Guide to Adobe Premiere Elements 7

• There is no audio signal of chronology in PREL12 the .m2ts files

  Windows 7-64, first 12 items (64 and 32 - the same result)

  Panasonic SC - 920 X camcorder, recoding format 1920x50p + DD5.1

  1. If I just copy the files .mts from an SD card into the PC and import it into PREL then there no problem with audio. It is to play the preview and timeline window.

  But in this case, I have a problem with the long record - camcorder breaks large files.

  So I use the SD instead of the simple copy import.

  2. the import of the SD using PREL12 (Get media of-> cameras Flip, AVCHD,...). In this case I get at disk .mts files and no audio timeline with these files. But in all other programs, these files are played with audio.

  3. import the SD using Panasonic HDWriter program. In this case, I get .m2ts files (and some metadata files.). These files read normally (with audio) in any player and the program I have (WMP, MPC, Corel Video Studio Pro X 6 etc.). Except the chronology of the PREL12.

  There is no audio signal of PREL timeline. And at the same time there is audio of the preview in the same PREL window (after double clicking on the item in the active project)!

  There is no yellow bar above these clips. Project settings - 1980x50p PAL AVCHD

  How to get audio of time?

  dik07

  Something for you to try.

  The quick and very rough to solve this way...

  Expert workspace...

  Before you import your media into the project, set the predefined project manually to

  PAL

  AVCHD

  Full HD 1080i25 5.1 channels

  To manually set the project preset

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to match the properties of the source media. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.

  And then import your source files in the project by the different ways you have tried and found not to work for your application.

  If it works, then the real solution...

  Premiere Elements does not come with a preset project to PAL AVCHD AVCHD 1080 p 50 5.1 channels.

  But, you can create one for use if gross suggests you need a project that is pre-configured with 5.1 channels included in its description. Please see details

  RTA Premiere Elements troubleshooting: PE11: export a file 1080 p 50 or 1080 p 60 with Audio to 5.1 channels

  Let know us the results and then we can decide what then.

  Thank you.

  RTA

• How CAN I Make, hearing, CC, Edit, file, audio, (.) DTS)

  How CAN I Make, hearing, CC, Edit, file, audio, (.) DTS)

  Help, please. Thank you

  However, if it's any help you, hearing can open, save, and, consequently, change the .ac3 Dolby Digital format files.

  Otherwise, as Steve says:

  DTS store | DTS

  Over-codes DTS - HD - Minnetonka Audio Web Shop

• First Pro CC sending only not the Audio files to edit on hearing CC

  Hey guys so I just upgraded CS6 cc. Before I had PremiereCS6 sent AuditionCS6 audio files without any problem. Since yesterday I have improved option is grayed and I can't do it. Not sure if this is something that happens to a lot of people or me. Any help would be appreciated. Thank you!

  

  Well, if someone falls by chance here for the same reasons I posted I finally found a solution that doesn't involve re - install from another thread. Here's the answer that it works like a charm.

  I had this problem and fixed it fast enough without having to uninstall and reinstall.

  Look for default .sesx files in your folder models Document/Adobe/Audition/6.0/Session (on Windows 7)

  It should be a list of predefined files .sesx. Right click and its default application like Adobe Audition using the option 'open with '.

  Once I did I double-clicked to open files .sesx with hearing, closed, open the first Pro CC and VUAAA-LAAA button is available and functional.

  I hope this helps someone!

• External editing problem - always JPG instead of PSD/TIF

  I want to report my hope detaily, problem can someone help me out of it

  I use LR 3.3 64-bit with PS CS5 64 bit on Windows 7 64 bit with CR6.3.
  In the past, it happens like this:
  -J' I select external edition instead of a TIFF file.
  -If I select the "abc.jpg" file and select "Edit a copy" (with or without change of LR), a file name "abc - edit.tif" will be created and opened by PS, after I finish editing, I click 'Save' and the ' abc - edit.tif ' will appear as-is in the LR catalog.

  Now, it happens like this:
  -If I select the "abc.jpg" file and select "Edit a copy with LR changes", it will open the original file "abc.jpg" in PS (with changes LR) (!).
  -If I select the "abc.jpg" file and select "Edit a copy without changes LR", it will create a ' abc - edit.jpg "and open in PS. Once I've finished editing, if I save it as a psd/tif file, this file does not appear in the LR catalog (but the file "abc - edit.jpg")

  I don't think it's normal and the effort I tried one are:
  -To update camera raw 6.3
  -Remove all preferences of PS to remove all the .psp file and hold Ctrl-Alt-shift when opening PS
  -Uninstall and reinstall PS CS5 and LR
  -Uninstall PS CS5 and install PS CS4

  Nothing everything above works for me and the problem remains the same.
  Any who share the same problem with me and have a clue on this subject.
  Thank you!

  PS: I googled a thread here discussing the same problem but the way he solved does not work for me.

  GS http://www.lightroomforums.net/showthread.php?6607-Lightroom-Bypass-External-Editor-Settin & p = 81191 #post81191

  I'm not sure what the Lynda.com video showed only a way to deceive PS by not opening automatically a copy of her would be to find and copy the executable photoshop.exe to photoshopX.exe in the same directory and then set this new copy with the X as a third-party editor, which always makes a TIF or PSD before going to the PS

  Another thing that could have an impact on how work files jpg is if you have Photoshop RAW preferences to prefer Camera RAW to jpg files or not, but I haven't played with that so I don't know, but something you can experiment with.  There is a parameter that opens only already-ACR/LR-adjusted jpg files at ACR and another open any JPG in ACR, first.  In your case, try the setting that says not to open jpg files in ACR anything.  The files jpg adjusted in LR would be equivalent to those already adjusted in ACR because settings stored in metadata.

• Has anyone here has any experience with a Sony NEX-VG10/E m2ts file?

  A file recently created with this camcorder and import its in first Pro CS5 m2ts file turns offering disappointing rsults.  The images are blurred and there is a lot of what seems to be the intertwining of issues.  If it wasn't for other programs to read these files very clearly that I would dismiss them as from a camera of inferior quality.

  Y at - there someone here who has had experience with these files and edit them in PPCS5?

  The file in question is stated as being a "file type: Format TS (STROKE)" and "Image size is 1440 x 1080".

  Hoping to hear from someone.

  See you soon,.

  Michael

  Make sure that your sequence configuration matches your footage.

  If you are unsure what sequence to choose.

  Drag a file into a new item icon.

  Have you set your playback at full resolution settings?

  

  

• Audio sync problems

  I am a wedding videographer who has a few months ago, from FCP to the PrPro CS5. I am currently working on a wedding ceremony where I have some audio synchronization problems. I filmed the wedding with 3 cameras high definition. The video was filmed all HDV 29.97, with 32-bit audio 48000khz. In addition, I used microphones tie for the spouse and the officer, each record to a device in the WMA format. I used "free mp3 wma converter" (which may be part of the problem!) to convert the WMA in 480000khz 32-bit WAV files. After using HDV Split to ensure that there are no breaks, I have imported/captured everything in first CS5. Once I dropped everything in the timeline panel, I find the part in every audio layer where the officate said thank you, "you can be sitting." I created markers not numbered to the exact frame that starts and all the video layers 3 and 5 audio layers becomes synchronized. However, when I scroll further down the timeline, something badly screwed up and I don't know if it's the video w / audio layers, or if this is WMA files that I have converted to WAV. Any help would be great!

  There are several discussions on the use of a separate Audio recorder and the OOS issues. Much discussion was provided by a few of us "old-timers," who bemoaned how things were to be, when the movie camera was attached to the Nagra, and could be configured to provide synchronization of Crystal, but that does not seem possible today with our great digital equipment. Should be easy, but it is a difference in "clocks".

  Hope just to get this straight, as I blew it away last wire - one single user with Zoom Audio recorder has found that the Audio derived from 100.3%, used if just the Stretch tool w / maintain Pitch to address that. It took experimentation, but when he found the % correct, it fixed everything.

  For questions of a general nature OOS, this ARTICLE could offer some advice, but in the end, I think finding the % of drift, will fix everything for you and with this same equipment, will still work. Test now will be dividend in the future.

  For some additional information, I search on this forum for 'sync' and maybe filter the_wine_snob (me), or Jim Simon and read. Jim is the user who found the exact % that was disabled, as well as sound equipment made of marriages.

  Good luck

  Hunt

  PS - just ignore the elders moaning in our drool cups.

• Help, please! After Effects has ceased to import .m2t files!

  Hello

  I met a relatively urgent problem that I hope someone can help me with. I do a video in after effects cs4 for a customer using sequences captured in HDV split this show as .m2t files. I edited with these files in after effect before, but now all of a sudden when I go to file-> import and select the file, I get an immediate "after effects error: could not import the file '... "type of file unsupported of extension.

  I also noticed that it wouldn't let me import the .mpg files however import .mov without problem.

  Any help on this would be greatly appreciated!

  Thank you

  Aaron

  > The version is 9.0.2.42 which I'm pretty sure is the most recent.

  Nope. There is a 9.0.3 update. Try installing that. After trying that, let us know if you're still having problems.

  Also, you say that you have imported the .m2t files before. Try with a file that was successful before so that we can exclude the possibility that the files you were trying today are not damaged or wrong somehow.

• No sound when you import the .m2ts files

  If I play with the Premier Pro trial version.  When I import my Panasonic TM700k .m2ts file there is no audio track.  There is no sound during playback of a video clip or after that I have to export it.  I'm new to PP so maybe it's something basic.

  Only 8 367 people asked before. Read the limitations of the trial version.

  For reading reduced:

  * The trial version of Adobe first Pro CS5 does not include some features that depend on software licensed from parties other than Adobe.  For example, some codecs for encoding MPEG formats are available only with the full version of this product.

• Work with sony m2ts files makes cs4 lag

  Hi all

  My system: PC - Intel Core 2 DUO 3 GHz processor with 2 GB of RAM (E7500) - audio usb interface Lexicon Lambda - NVIDIA GeForce 9800 GTX + video card in windows xp pro service pack 2. First pro cs4 version 4.2.1. I went through the steps described in the "Guide for a question of efficiency" and per the instructions, I have included links to the results DXDiag, MSINFO32 results and screenshots of a couple of screens in Process Explorer:

  E2 http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cYTVjNWEwNTktMTEzZi00ZmUyLTk5MTgtZWQxZTUxMzNhYz & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cYjQ2ZGY2Y2EtZmQ5Mi00ZGFhLTlkYjgtYjZiODIxODg1Nj Yz & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cOGExNzc0ZGItZjkzZS00MTkwLTk0MWQtYWZmODYyYTg2MD cy & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cZjI2MDFlNDQtYTJlYi00MWE5LWFhYTYtYTk5YjY0YmY5Ym Mw & hl = en

  
  http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cNzlkYTYwNGYtMDBlYi00OGQ0LTgwMDItZTJiMGJjNDYyNj kw & hl = en

  I use sonys picture motion browser software to get the raw files off a Sony HD camera and on my hard drive (a separate physical disk from the operating system drive). I shoot the m2ts files in my project and as soon as I have a m2ts video in the timeline and play it, the sound will start but the video will lag, showing the same frame for 15-20 seconds before jumping awkwardly to another frame. If I let the video game latecomers worsens and the audio quality will start to deteriorate to the point where the voice sounds like they are fed through a pedal distortion guitar or something. I found that if I go to edit > Preferences > Audio hardware and set the default device back to 'First Pro ADM Sound' and then right towards "Lamda" ASIO it sort of "pop", the sound card and the clip will play smoothly for a few minutes until the video starts late and then the audio starts degrading to the distorted voice and I go 'pop' sound card again. Depending on the size of the project I am working on I can just to do this just once or twice during a shift of 8 hours and other projects (like today) I have to do every couple minutes.

  I don't know that I've left something so feel free to pull him out with additional information you need.

  Thanks in advance,

  Brandon

  Hi, Brandon.

  Just recently, I deal with a similar situation from my Panasonic AVCHD camera and the box that I had just did not have the ponies to treat. I have since bought a new box that is more reasonable, but I also put in place a step in my workflow.

  Because I'm only producing a standard def output, my first step is to convert the files .mts of my camera SD files uncompressed via a program that Panasonic provides for this purpose. This gives my release of performance system much more to work, because I'd rather have my box burn CPU cycles on reading, rendering, etc. to chip away the extra bandwidth that I don't need the HD source material.

  Initially, I found that my lower power box treat reading an AVCHD video line, but when I started layering multiple video tracks playback would stutter, cough and the direction the nearest pub. This technique made me all night with this box in anticipation of a new arrived, and of course puts less load on the new box as well.

  Hope this is useful and fun!

  Chris

• Not able to read files audio wma

  I myself had this new cool device and everything is working fine beside it is not able to read files audio wma.
  It works without any problem on my Samsung android phone, but on my Slate7 it says format not supported in specifications indicates that it is supported.
  I installed the same player that I use on my Samsung android phone, any suggestions I should do to fix this?

  To my knowledge 4.1 Android doesn't have the necessary codec to play default WMA files. Please see the compatible audio formats listed by Android developers:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  However, for me MXPlayer/VLC works to play WMA files. You can try this one, and there is no harm to try. Two of them are available on PlayStore. You can uninstall them if you don't like them or if they do not meet your needs.

• Player c00d10d1 don't read file file.audio that was returned to the wave of reaper

  c00d10d1 fix for xp

  How can I fix c00d10d1.player not set file file.audio wave which was vague reaper blocks [recording software] must be a way without downloadind stufft which is not microsoft.

  Hello

  · What version of windows Media player installed on the computer?

  You must install the Codec related to solve the problem.

  Package of Installation of codec

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  See also:

  Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)

  http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

   

  Note: The above are published in the Windows 7 category, but they apply to Windows XP too.

• I'm trying to import video in Movie Maker and get the following message: M2U00017. MPG could not be imported. An interface has too many methods to fire events from. What do this mean and what should I do to allow me to import video files to edit?

  When you try to import video files in Movie Maker I get the message; M2U00017. MPG could not be imported. An interface has too many methods to fire events from

  -What this means and how do I fix it so I can import video files to edit?

  When you try to import video files in Movie Maker I get the message; M2U00017. MPG could not be imported. An interface has too many methods to fire events from

  -What this means and how do I fix it so I can import video files to edit?

  =======================================
  Movie Maker has problems with the .mpg files... best bet would be
  to convert the .mpg files before importing the .wmv format.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, .wmv

  See the following article:

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the main screen...

  Select "At?" / OK...
  (the? is the format of your choice)

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - digital media experience

• My saved Windows Movie Maker Project open with video clips in the Audio editing panel and vice versa (NOT as it was created). Can I move them back where they belong?

  After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie.  All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes.  Is it possible to move these clips to which they belong without having to recreate the whole project?

  What happens if you try to read the project in Movie Maker?

  Looks like your project .mswmm file is corrupt (starting
  Perhaps more than the best approach). The project can be as far
  too big and too complex to publish (save) with success as a
  video file.

  I suggest that you create several small projects
  and publish (save), each of them in the. WMV video format
  and then re-import the collection. To combine WMV files
  in a single movie.

  You can also import collection. Clips WMV to DVD
  Manufacturer and each clip, would have become a scene (chapter)
  on the DVD.

  The following article is maybe worth a visit:

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm