M30 Trackpad "sticky" by dragging

Howdy!

I just got a new satellite M30X-111 to replace my old Sam. So far, it's great, that I just have a few questions to address before making the big transfer of Junk.

I have an irritating problem with dragging on the trackpad. If I double tap and drag it works very well but is not let go as soon as I do. It's really bugging me because if I scroll in Firefox, then let go and slide on to click on a link the page zooms back again!

I'm sure that I have disabled this regards in mouse driver stuff, but I may have missed something.

I got appreicate indices, otherwise I'll probably end up installing a generic mouse driver!

Thanks in advance

Al (Argh, it's still make in this text box.)

Hello

Normally there is no available special mouse driver, but you can really dry to reinstall th generic mouse driver.

If the problem still exists an update of the EC/KBC should be by a Service Station from Toshiba. The EC/KBC manages the trackpad and keyboard settings and can be an update is necessary!

Good bye

Tags: Toshiba

Similar Questions

  • trackpad2 - 3 finger drag, 1 sec lag on release

    When I first turned it on under the trackpad settings or accessibility, there is certainly not a second 1-2 free gal. I used it for days and it perfect. I'm gamer and professional graphic designer I operate a pad/mouse very quickly. all of a sudden, there is a lag of 1-2 dry output which makes the function of 3 fingers unusable for me.

    When I turn to the internet, there is about her being in withdrawal from positions or in its State... any tips/fix for this version mismatch?

    Thank you!

    Wangmander, I don't have a solution to your problem, but I'm very curious to know how you managed to make your magic Trackpad 2 actually drag three fingers! I find that in my new iMac system preferences, and I hate to leave when I got it on my previous Mac. How to set that up? Thank you!

  • Drag three fingers on the Trackpad 2

    I am using a first generation Magic Trackpad on a rMBP without any problem. One of the things I liked most was the possibility to use three fingers to drag the files or folders, etc.

    I just changed a new iMac with the Magic Trackpad 2, and I wonder how to recover the function of slide three fingers again. I can't find this option anywhere, in system preferences, and really miss me. I often have to drag things a relatively far distance (particularly on this larger screen) and keep my thumb pressed and dragging my finger at the same time is not nearly as convenient or easy.

    Any ideas? Thank you!

    Never mind! I just got the solution sent me: https://discussions.apple.com/message/30247161?ac_cid=tw123456#30247161

    It is not in the Trackpad preferences at all; This is part of the accessibility! I make a note of it for use later, just in case!

  • How to drag a desktop with the magic trackpad icon?

    How to drag a desktop with the magic trackpad icon? It is coupled with a Mac Mini El Capitan 10.11.4 running.

    Thank you.

    Place the cursor on the icon then press on and hold and drag your finger across the surface of the touchpad.

    If problem, then check your trackpad preferences.

    Note also you maybe isn't able to move them they will break again) if other that None is selected in the sort by if you hold with two fingers and choose

  • Click and drag does not work Magic Trackpad 2

    I have a new Magic Trackpad 2, paired to a Macbook Pro (mid-2014). It works for the most part very well, but I have a big problem. Dragging never works well. For example, if I want to move a folder in the Finder to a different location, I used for a click or select, then just drag it to the new location. Now it does not work or works so rarely that it is useless.

    I got the 1 trackpad, and I have no problem.

    Make sure that you are not too much pressure.

  • How does one select type or drag a window using the magic trackpad?

    How does one select type or drag a finder window by using the magic trackpad? I can't find the finger combinations to do either. Thanks in advance

    Do you use the old Apple Magic Trackpad or the new Apple Magic Trackpad 2?

    The Trackpad 2 is only compatible with OS X 10.11 El Capitan and NOT earlier versions of Mac OS X.

    Use on your Mac - Apple Support multi-touch gestures

  • trackpad no reaction on drag and drop, when I press on the very short?

    Hello

    I wonder if I have to go to apple genius bar like my trackpad (retina mb 12 ")

    does not react when I press on and move an item, press only when a fractons of a second.

    This is how different my mb air

    right?

    Could not edit my previous post:

    It does not react when I press on and want to hold/move an element, only when I press on a fraction of a second, it works.

    When I hold down, it shows me the image of overview of the issue, even while pressing the space bar.

    It seems very delicate, because I'm used to drag and move an item by clicking / pressing more time to activate items and then drag them to another place,

    by moving my finger on the trackpad.

    This is what apple has changed or is not working properly my trackpad?

    Thank you

  • How to drag the apps? to force no click trackpad... I think they remove this features for elcapitan

    How to drag the apps? for a force not click trackpad...
    I think that they remove this features for elcapitan

    Select the application, and then hold down the trackpad (click), pressed with the left hand, while you use your right hand to drag the app.

    Note: This creates an alias to the place where you drag where you want to move , you also need the CMD key at the same time.

  • Why Magic Trackpad 2 does not allow me to drag-and - drop

    I bought a Magic Trackpad 2

    and it does not allow me to drag and drop the most basic functions

    Why?

    Click the icon, not the file name, and do not press too hard.

  • S430 trackpad and now the mouse drag when does not necessary

    My S430 is usually updated with all the drivers and software. Works on Windows 7 64.

    A few weeks ago the trackpad starts to be a real problem - perhaps after an update. When I use it to move the cursor instead of that he comes to select text or to pick up and drag items. It became a real problem. I was in a high humidity area and has been mentioned as a problem so I used just the trackpoint or mouse external instead.

    Now today for a short period the external mouse was also doing the same thing. Without touching the mouse keys, * even just move the mouse * has been supported and dragging around the screen or text selection elements. You can imagine it's very frustrating when the unwanted.

    I changed the mouse settings with no luck. Any suggestions very welcome. I'm starting to think that the solution would be to go back to older versions of the drivers maybe.

    Updated - after short time the problem comes back. So I have now uninstalled the driver for the touchpad on your advice and spin on the generic probably. So far its ok...

    Update: no, it was a waste of time. Same problem - when using the trackpad, the cursor is constantly striking, by dragging or by selecting things even though I'm very light with my touch. I tried to change the UltravNav. The pilot it changed to the Synaptics a 16.6 looks like. It's so frustrating! I looked to see if I could disable the 'click with trackpad' feature (that I never, ever had to do on any laptop ever) but it does not seem an option for.

    Update 2: so now after the removal of the driver again, restart, and restart again after the reboot, Windows application the Ultranav settings have disappeared since the mouse control panel and a 15.x Windows generic driver can be seen as being in use. I'll run with it for a while to see how it behaves. So far it seems ok...

  • Interim effect parameter click-and - drag "sticky"?

    Hey everybody!  I tried searching for the same problem, but I didn't even really know how to describe concisely...

    So when I work with a purpose and I want to change a parameter... I will use crops as an example... If I want to change the culture of the left, I can move just my mouse on %, click and drag left or right to adjust the setting.  For the last month or so, however, I noticed that, in order to get the amount to change, I really need to move a long way before it begins to change, of course, he will swing wildly too far then and I have to bring back that I wanted her to be in first place.  It's as if the setting is "sticky" and I have to break this "rigidity" so he can start moving.  Once it starts moving, it moves and behaves normally.  Y at - it a name so that the initial resistance and y at - it a setting anywhere to adjust it?  I've been putting upward with her for about a month now (I don't remember doing this before this date) and now I'm at the point where it drives me crazy.

    To review:

    Cultures, for example

    I take the '0% ' to try to drag up to about 10-15% or more.

    But it does not move until I have hanging elsewhere out of hell, then it rises to 50% or more.

    Then I can call him and he slips back normally.

    This question of the effects of all the effects that I have used, including the standard scale, Position, Rotation, etc.  So I don't think it's specific to a given effect, but to the interface itself.


    Is anyone else having this experience or can give me any idea how to fix?

    Not for me. He responds immediately.


    Brick.

    Hold down the shift + alt key while rebooting first.

    Maybe this will help.

  • Sticky mouse trackpad

    My left key my Track pad sticks and I was wondering if it removes as a key on a keyboard or if there was another recommendation on how to clean it

    Thank you

    If MouseKeys are under the trackpad, and then the bezel needs to be replaced. The keyboard is not supposed to be repaired without specialized equipment. Years the main summits could easily remove and reinstall, but not now.

    YMMV

  • Drag and Drop point sticky

    I have created a drag and drop game for K-2 classes and two of my pieces with the mouse stick when the user clicks on. I'm not sure what the problem is that I used the same code for all my parts.

    The pants1_mc and the glasses_mc are the problems.

    I tried your script and all the elements of fact the same - they stuck with the mouse on MOUSE_UP until I removed 'true' to the line that reads event.target.startDrag (true);
    See if removing real help for you.

  • gesture trackpad of three fingers to select text does not work on the sierra

    I have a MacBook Pro (13-inch, mid-2014 retina). After upgrade to sierra trackpad gesture to select text using three fingers does not work. Instead, I saw that now a press and hold your finger and drag to select the text, it's very painful and does not work perfectly as three fingers gesture.

    If by mistake the press with a single finger is lost text selection stop there and have to start over and it also causes mild pain if the selection is long.

    Please let me know if anyone knows how to get the text selection gesture three fingers in sierra.

    OK the solution is already here - https://support.apple.com/en-ae/HT204609

  • trackpad

    why there is no option in my trackpad drag any folder with three fingers?

    Have you tried to define what you want in the PreferencesTrackpad system?

Maybe you are looking for

  • Drag and drop between screws

    I don't have much by using the drag and drop experience. I think using a tree control that appears in a sub VI with a list of channel names. I want to drag the name of the channel on an indicator on my main façade. There will be little code concerned

  • How low is low wrt LowFrequencyOneCounter

    We want to measure the period using CIChannel.CreatePeriodChannel (). The pulses to measure are to about ~ 220 Hz. What is a frequency too high? Obviously, we would like to avoid using two counters for this, if we can avoid. Nathan

  • Add hexadecimal bytes to form a Word

    What is the best way to add the hexadecimal digits in a string to form a Word. I am currently using the string into a byte array, then the elements of the array, but this returns a single byte, i.e.xAA + xAA = x 54 How can I return the full word, tha

  • the screen image

    When I open a page on the internet that I can't see it on the screen. It seems to be enlarged.

  • After restoring the factory network card settings will not start

    I have toshiba L300 satt he wouldn't start so after restore settings factory network card does not start so can't do updates cannot find wireless network and I tried plugging cable ethernet directly to the router still cannot be detected or nothing c