Sticky mouse trackpad

Similar Questions

• MY MOUSEPAD MOUSE/TRACKPAD NOT WORKING DO NOT. MAYBE DISABLED. HOW CAN I FIX IT?

  is there a way to fix this

  Hi Kimberly,

  The best place to start is to contact technical support for your computer manufacturer or the mouse/trackpad carpet if it is separate.  They will probably ask you update the drivers/firmware/software applicable to the unit at first (which is what you need to do if you decide not to get their support - but they are the ones who can help you better and the fix can be much easier).

  I'm moving this to the hardware subforum generic because I don't know your OS, or anything on the device or computer - but experts, should be even more fun to help you if the above does not work (but it should and is the best first choice).

  Good luck!

  Kosh

• How to unlock a keyboard on a computer windows vista laptop. mouse /trackpad are ok?

  How to unlock a keyboard on a computer windows vista laptop.  mouse /trackpad are ok?

  Don't know how you locked up - sounds like a hardware thing.

  If you plug in a USB keyboard - it work?

• mouse / trackpad medium sensitive & can not change

  My mouse / trackpad is so sensitive that he clicks on his own all the time. It does if often it is almost impossible to use the computer at all b/c he wants to always click on something and take you away from what you type. I guess it's the possibility of a click by tapping the trackpad went hyper.
  I tried to go to control panel - mouse, but there is no sensitivity setting. There is also nothing that appears when you do a search for "sensitivity", "trackpad", "touchpad" or even "pad". So, is there a way to fix this? Perhaps to lower the sensitivity or disable the click in typing option?
  Just upgraded to Windows 7 but I am having the same problem, I had when used Vista.

  Finally got to the Asus technical support. There was a missing pilot and now things work better. No idea how he wasn't there first place however.

• MacBook Pro slider is not clicking on things. normal mouse/trackpad

  Hello

  The cursor on my Macbook Pro retina 2012 stopped affecting what I click on.  The mouse and trackpad are normal, the cursor will move normally, but nothing is affected when I click. I tried a USB, mouse, but still does not.

  I turned he walks to the switch, it left overnight, but it still does not.

  Recently he has had a problem one or twice with the warning of problem of sleep/wake, don't know if that is related.

  He carries the original operating system, cannot tell you what it is b/c I can't open the info.

  In addition, my office has had the same problem 2 days ago, which picked up after leaving it and unplugged overnight. Strange coincidence?

  Help, please!

  Hello inafromfitzroy,

  If your Mac does not respond to the commands of your mouse or trackpad, first try to reset the system management controller (SMC) and the LANDAU.  Start safe mode, and then see if you are able to navigate through your system.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  Try safe mode if your Mac does not end commissioning

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Take care

• Sticky mouse microsoft

  I have the MS Wireless IntelliMouse Explorer 2.0.  The rubberized medium have become sticky.  Less than 2 years ago, I bought 5 boxes of these mice.  I decided to enter another mailbox storage costs. As soon as I open the box and pull the mouse on, I noticed the rubber supports the fresh new mouse its also sticky. I feel that the distribution of support rubber happens over time, even if you do not use the mouse. Now, I'm not sure I want to open the 3 remaining boxes of mice. Microsoft will replace the 3 new boxes closed?

  Hi Yohha,

  Welcome to Windows Vista community responses.

  Replace Microsoft software or hardware damaged, defective, or lost:

  To request the replacement of hardware or software, contact the Microsoft Supplemental Parts team at the appropriate number provided in the section "contact information". You must be in possession of the product (if it is damaged or defective) and be able to provide proof of purchase. Service representative customer will notify you of any costs of replacement or shipping and handling fees that may be charged. If a product is no longer under warranty, the replacement item may no longer be available.

  Contact information:

  In the United States and the Canada, you can reach the Microsoft Supplemental Parts team at the contact numbers listed here:

  Of the United States: (800) 360-7561, from Monday to Friday from 05:00 to 19:00 Pacific time.

  Canada: (800) 933-4750, from Monday to Friday from 05:00 to 19:00 Pacific time.

  TTY customers: Contact Microsoft at (800) 718-1599, from Monday to Friday from 05:00 to 19:00 Pacific time.

  International replacement requests

  International replacement requests should be directed to the appropriate local subsidiary. For more information, visit the following Web site: http://support.microsoft.com/common/international.aspx

  To check the status of your order

  To check the status of an order you have placed online or by phone, visit the Microsoft Web site at the following address: https://admin.innotrac.com/Microsoft/ics/

  Ref: How to replace Microsoft software or hardware, order service packs and upgrades and replace manuals products - http://support.microsoft.com/kb/326246

  Hope this information was useful.
  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• X120e mouse / Trackpad configuration error

  Hello

  I just bought a X120e and I'm really enjoying it, except for an annoying bug:

  I want to disable the trackpad ' tap to click on ' as my awkward finger often end up turning it when I want too. For me, this should be a simple configuration in the trackpad configuration change, but when I choose Control Panel - hardware and sound - mouse or the Lenovo - settings of the mouse devices Experience, I get the message:

  
  

  Unable to connect to the Synaptics Pointing Device Driver.

  
  

  If you have installed another PS/2 pointing device driver, please uninstall the Synaptics driver by clicking on the Yes button. You must then reinstall your device pointing to your external device driver again.

  
  

  You want to uninstall the Synaptics driver now?

  Standard Windows, the mouse configuration screen then appears and I can't access the Synaptics trackpad settings to disable tap to click option.

  Needless to say, I have not installed the external mouse drivers.

  Anyone has suggestions or solutions?

  Thank you

  Paul

  I had the same problem when I unboxed my X120e.  I uninstalled the driver UltraNav, rebooted, ran ThinkVantage System Update and chose to install the Synaptics UltraNav driver he suggests.  This solved the problem for me and now I can access this missing page in the mouse control panel.  Sorry for the inconvenience!

• Mouse/trackpad problem

  I've updated my new macbook el Captain update (not sure of the exact name) and it worked fine, but recently my trackpad just randomly stop move or leave me a click while I do anything. The whole system would be stuck on all the screen was on. The only way to stop it hold down the power button and sound happened very often recently. someone knows what to do/is this common? I'm very careful with my laptop so I know its nothing I did.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Satellite P500-12F - mouse trackpad not working not

  Hi all

  I just bought a P500 opportunity and the touch pad does not work, I tried to market through f9 FN keys but nothing will work even the left and right mouse buttons, I would like to ask if there is something else I can try or if not what kind of costs are involved to fix it please also where would I get a backlit KB and it would work on this model? When I type some time missing a letter as if I'm not hitting the keys hard enough, but I think I am lol...

  Any help really appreciated, thank you very much.

  Sincerely, Wayne...

  Hi CT1965,

  The touchpad does appear in Device Manager correctly and did you test if other FN keys work correctly?
  What operating system is currently installed?

  There are different reasons why the touchpad does not work, but first of all I recommend reinstalling the driver for the touchpad itself. You can download it from the official European driver Toshiba download page.

  Regarding the backlight keyboard: it s based on the motherboard if there is a second keyboard to the keyboard backlight connector. Normally, you can check this if you disassemble the laptop and remove the keyboard and take a look at the motherboard, but if you are not familiar with the disassembly of the laptop I would ask a maintainer approved assistance. :)

• 2 months ago, I bought a mac pro and it is damage by a spillage so mouse trackpad and keyboard not working.does guaranteed covered by whom?

  I have to pay to repair it or it's free?

  Warranty covers manufacturing defects, not accidental damage.

  The (free) quote, decide if the cost of repair is worth.  Do not expect that the damage has already begun and can worsen.

  To pay for the damage, check with the owner's insurance and credit card company to see if either a special clause to cover accidents (just say * may * exist).

• disabled bluetooth. No mouse, keyboard, trackpad how to ACTIVATE

  NOT DISABLED BLUETOOTH NO MOUSE, TRACKPAD, KEYBOARD, HOW CAN I TURN ON

  Turn off your computer, make sure that Bluetooth devices are on, then start up the Mac. It should detect the devices.

  If this isn't the case, you need to use a wired keyboard.

• MacBook Air meets does not to the clicks of the mouse or trackpad

  There must be something serious to the software (or firmware?) on my MacBook Air. He stopped to answer all of my keyboard clicks or trackpad today. The two input methods work very well in the Bootcamp partition / Windows 8.1.

  I restored Time Machine (use only the keyboard commands) and this did not fix it. I have reset the PRAM and no improvement. At first there was no edge to restarting with the Apple logo, which appears. Then I formatted the hard drive, all wiping (once again in control of the recovery mode + are that the left click will not work). Reinstall OS x is not possible that the final click required for installation on the hard disk requires a mouse click and can not be triggered by keyboard commands I can find.

  I tried to do it in single user mode, but could not get the unix commands to allow arbitration of disk mode (no idea what it is; just found online).

  I am currently looking for another restore from Time Machine.

  Any ideas? This doesn't seem to be a hardware problem as the Bootcamp partition has functioned well before I nuked it.

  I managed to reinstall OS 10.10, but during the final stages of reinstalling my judgment of clicks of the mouse/trackpad works again after having worked briefly to the recovery partition after formatting the drive. Something is be re-installed inhibits clicks work. I restore to a clean installation with no software installed so I don't think this other program or driver. There is a deeper level of formatting the drive I can do?

• I have the key movements jerky, sticky for my mouse

  Since the last "update" - everything is moving hesitantly, keys seem sticky, mouse is jerky.  What can I do to get smooth

  return movements?

  Do a system restore and install all updates manually - install available updates one after the other.

  System Restore - how - Vista Forum
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

• Is it possible to use my iPhone as a mouse and a keyboard officially from Apple?

  I know that there are 3rd party apps, but is there a way to use my iPhone as a keyboard or a mouse/trackpad?

  I mean, I mean, my iPhone can connect with my computer as my Apple Watch done with my iPhone?

  Is there a way that apple can enable constant consistent communication to cable, Bluetooth or wifi and do you agree?

  Thank you

  OS X El Capitan

  10.11.6 version

  Mac mini mid-2011

  2.3 ghz Intel core i5 processor

  16 gb 1333 MHz ddr3 memory

  iPhone 6s +.

  version 9.3.3 (G 13, 34)

  model MKTT2LL/A

  Edit: Just noticed it's posted in AppleTV, so this may not be relevant.

  There is no application by Apple to make, I use an app called TouchPad to control my Mac connected to my TV, it has no keyboard or mouse attached and I just use the iPhone/iPad.

• Apple and Magic mouse/Touchpad keyboard does not not in CT

  I have an end 2013 27 "iMac connected to a MacMini via TB.  When I get the TOC, I can see the desktop of the Mini, but my keyboard and mouse/trackpad unresponsive.  I have not tried to connect a knockout and a separate mouse to the mini to see if they work... I wanted to see if there is a fix for this problem before doing so.  Thank you in advance!

  A Mac connected to an iMac in target Display Mode cannot use built-in camera computer iMac, its USB, FireWire or Thunderbolt ports or devices connected to these ports. To use external devices with your Mac, connect these devices directly on the Mac you want to use them with.

  Use your iMac as a display with the target - Apple Support Display Mode