M3970BM diagrams necessary
I installed the mobo from a h8-1223 in a new case and I forgot to highlight where the wires went before pressing all the, so this forum is not marked as to where the pw sw, pw led, hdd led, reset sw, etc. go. The only one I've found is where goes the pw sw. When I search patterns that this model mobo, all I ever find is the schematic M3970AM mobo. Its like the BM model does not exist. It was a new office last year and has never been amended. The case has not yet been opened. Can someone help me find a diagram of the M3970BM mobo?
AM is all that I found in my research too. But, I'm looking at the mobo right now & he said BM on it. The photos I found of the AM Council seemed different from what in there, so I never even looked at the disposal of the pins. I believe that you sent will be very well b. thanks a lot.
Tags: HP Desktops
Similar Questions
-
What is the best way to keep the block diagram / cleaning of façade?
Hello
I'm relatively new to Labview so I'm not able to say if I'm overloading my programs or make my too crowded block diagram. I was wondering if there was some ways to tell if I can simplify my programming just by looking (perhaps only experience contributes to these things)?
I enclose my VI here. Currently, she is able to monitor the voltage and current of two engines. On the screen, you can see an indicator with the voltage and current values and there are cards that can display signals of different engines with a menu drop-down.
The façade is pretty clean, in my opinion of novice, but the block schema seems messy to me, just at the first glance. I foresee a problem occurring in the future however. In the future, I will have the VI to monitor 50 engines globally. All of the programming will be the same as the one I have now, but it will have 50 indicators and unfortunately 50 times just about everything. I would like to avoid this, but I don't know how I did.
I use a USB-6009. I use its four differential inputs to monitor the voltage and current of the two engines. In the future, I will get more units DAQ (25 in total because 2 motors can be monitored for each data acquisition). The new Renault will help will help with more resource space, but I think things complicate with the added option of 24 more Assistants of data acquisition (as used in my code).
Thanks for any help you might be able to provide!
Usually, it is above all the experience that will teach you the best methods for making your code to do pretty. I don't know anyone who is proud of his first application of claws. There are some resources out there to help with best practices, as that group on ni.com, but you will learn most of your own development.
Your façade is superb. FPs in general really are to you. You can do it as ugly or pretty as you want. When you have a few controls in duplicate and the Group of indicators, you should use clusters and berries to simplify. You can use a bit of cleanup in this regard, but not much. In addition, I personally hate read red text unless it is a warning any.
Your block diagram could use a little cleaning in a sense of modularity. You have a lot of repeated code, which you might consolidate in to a Subvi, which is used in multiple locations, or in a loop For. A general rule is to keep your block diagram within a single monitor. You should not scroll. Your application is quite simple, so it is difficult to BUMBLE
Here are a few details on your block diagram:
- Click with the right button on your devices on the block diagram and uncheck the "display as icon". You are welcome.
- Operations on each waveform "(x*2-4)" / 16 in double ": create a Subvi and/or run the waveforms through a loop."
- You do a lot of 2-element arrays and then indexing. Just replace the ones that have a Select node based on digital.
- All your code runs every time, including the knots of your property at the bottom, which is not necessary. As you learn LabVIEW architectures, you will learn how to get around this with the initialization and the output of code, but for now, you should put a case around those structure for only when the engine numbers change.
- I don't know how you're timing your main loop, but you should put a delay in there because you don't need the DAQmx node shoot as fast as your CPU will allow.
There are videos of intro free that you can watch to learn what OR think in terms of coding and teach you some of the basic features and such. Here's a three-hour course, and here's a six-hour course.
-
Is any way to put a VI that I placed on a palette in the menu functions to create a copy of it self when I place it on the block diagram?
My example is as follows. I create a palette for a messaging configuration. The 'send message', 'message' and so forth will work normally with just called when necessary. But 'Create queues messge' must be specific for each instance, because I'm going to create a different number of queues each time I use it. (See system messages in queue OR for the "Continous Measument and Logging" model).
So every time I drag and drop that VI (Create message Queues) in the palette, I want that it ask me where I want to save the VI.
Is this possible?
See you soon
Henrik
There is always the file-> new... that opens a new window. You can have your models in this window by putting them somewhere (I can't remember where at the moment).
-
How can I show multiple locations on a single diagram?
In my program (attached), I try to display 14 channels of data on a chart. However, whenever I run the program it displays only a plot (not 14) and it seems to put the 14 data points in a series, instead using 14 different parcels. I tried to translate the table before sending it to the table, but could not get that to work.
Any ideas?
Dave
Simply insert a 'cluster' table before the graphic terminal. Don't forget to set the size of cluster at 14.
(Btw:)
- If you place the Terminal STOP in the loop DAQ, you can do lock action and remove the big sequence. The second image is no longer necessary.
- MathScript is a bit overkill just to the scale of the data. Simply multiply with a constant table diagram. If you make size = 14, you don't even have the subset of table operation.
- Because you do not use the time-out event, you can remove it. Less clutter.
- ...
)
-
There may be a good reason for it that I just didn't understand. I saw no doubts, it searches the site of NOR, however.
But it seems to me quite annoying to always have to go to the front to access the connector pane view, especially if some of these connectors are hidden. So I have to go the block diagram, guess what control/indicator I want display, go back to the FP to check it on the part of the connector, and then go back and hide it again, and repeat the operation if necessary. Even if the C / I is visible on the PF, it's still an extra step or two.
When I build the connections using the diagrams and planning where to put connectors in subVIs they would be easier to associate (inputs/outputs on the sides line up, don't have to go up and down, etc.), it would be nice to be able to work completely in the realm of block diagram.
Cameron
Yamaeda wrote:
Good idea, put it in the exchange of ideas!
He has been there for some time already. No need to reproduce...
-
small problem with a simple diagram
I tried the new Multisim 11 and so I decided to reproduce the diagram below, I took a book. It should be conducted intermittently at intervals, but I can't make it work. Well want to can someone tell me why it is not working (flashing)?
Hello Poldoj and Andrew. I agree with Andrew. He has not worked with 470 kOhm (the time is long, but nothing the case - even if you wait awhile). It seems that the simulation never reaches the flash point. I dropped 470 kOhm to 220 kOhms and then it works. In the simulation, the LED flashes (briefly), but it still not completely eject 2.2 uF. I added a resistance of 100 ohms across the LED to discharge the capacitor more. It is easier to see what is happening in the graphic, then, but not is probably not necessary in the real circuit. See the two graphs with and without the 100 ohms.
W.kr.
-
Installation diagram HR in Oracle Database 12 c
Hi, for the life of me I can not the HR schema installed.
With OEL6 and Oracle Database Linux 12.1 c
With the help of the wizard and advanced configuration, I chose to include sample patterns. Everything installed OK. However, none have been installed.
I then downloaded the examples file, unzipped, installed. All right.
Tried to follow: http://docs.oracle.com/cd/E16655_01/server.121/e15979/installation.htm
but also:
But in vain. I still get the same error:
SQL > @?/demo/schema/human_resources/hr_main.sql
Specify the password for HR as a parameter 1:
Enter the value 1: *.
Specify default tablespeace for HR as parameter 2:
Enter the value 2: users
specify the temporary tablespace for HR as parameter 3:
Enter the value 3: temp
Specify the password for SYS as parameter 4:
Enter the value of 4: *.
Specify the path journal as a parameter 5:
Enter the value of 5: @?/demo/schema/human_resources/hr_main.sql
SP2-0606: cannot create the file 'tvtsdb/u01/app/oracle/product/12.0.1/db_1/demo/schema/human_resources/hr_main.sqlhr_main.log' SPOOL
DROP USER CASCADE hr
*
ERROR on line 1:
ORA-01918: user 'HR' does not exist
CREATE USER IDENTIFIED HR BY *.
*
ERROR on line 1:
ORA-65096: of invalid common name of the user or role
ALTER default TABLESPACE users USER HR
*
ERROR on line 1:
ORA-01918: user 'HR' does not exist
TEMPORARY ALTER TABLESPACE temp USER hr
*
ERROR on line 1:
ORA-01918: user 'HR' does not exist
GIVING CREATE SESSION, CREATE VIEW, ALTER SESSION, CREATE the HR SEQUENCE
*
ERROR on line 1:
ORA-01917: there is no user or role 'HR'
GRANT CREATE SYNONYM, CREATE DATABASE LINK, RESOURCE, UNLIMITED TABLESPACE to HR
*
ERROR on line 1:
ORA-01917: there is no user or role 'HR'
ERROR:
ORA-12154: TNS: could not resolve the connect identifier specified
WARNING: You are more connected to ORACLE.
SP2-0640: not connected
ERROR:
ORA-12154: TNS: could not resolve the connect identifier specified
SP2-0640: not connected
SP2-0640: not connected
Creating a table of AREAS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating a table of COUNTRIES...
SP2-0640: not connected
SP2-0640: not connected
Creating a table of LOCATIONS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating the DEPARTMENTS table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating a table JOBS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating an EMPLOYEES table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Create a table JOB_HISTORY...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Creating an EMP_DETAILS_VIEW view...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Populating the REGION table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill table DESS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill table of LOCATIONS...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Filling of the DEPARTMENTS table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
JOBS table populating...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill the EMPLOYEES table...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
Fill table JOB_HISTORY...
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0641: "EXECUTE" requires the connection to the server
queue is not currently
Can someone tell me please in the right direction?
Took forever (it's really the first time I use Oracle, no knowledge of database), but I finally got it to work, so I'll mention it right here for others to take advantage if all goes well. As I am new, some of these steps might not even be necessary, I'm not sure
Turns, even if I have included diagrams of the sample in the installation, the only installed pattern was the Scott schema. Unfortunately, that was not the HR schema.
You will need to download the examples of schema file and install it.
Then follow step 1 in the following post:
https://community.Oracle.com/message/11234394#11234394
Who said you have to understand an Earphone for your PDB (not the PEH).
So just add another entry for your PDB if you do not already have one in /u01/app/oracle/product/12.1.0/dbhome_1/network/admin/tnsnames.ora #note: directory names different. Mine was too
Important part is the (SERVICE_NAME = pdborcl) or what is called your PDB.
Stop and start the listener:
lsnrctl stop $
lsnrctl start $
Follow step 2 in the same post above to change the script of human resources which should be /u01/app/oracle/product/12.1.0/dbhome_1/demo/schema/human_resources/hr_main.sql
Or, just manually change the following lines in "BOLD". In the following example I changed it to my PDB called pdbtvts:
REM =======================================================
Grants of REM of the sys schema
REM =======================================================
CONNECT sys/&pass_sys@pdbtvts AS SYSDBA;
REM =======================================================
REM create schema hr objects
REM =======================================================
CONNECT hr/&pass@pdbtvts
Then, it is important that YOU do activate HR user having limited SESSION, otherwise you won't be able to connect. This happened to me.
Thus, under where the user hr has permission (over these lines, us has just edit), add the line in bold below:
GIVING CREATE SESSION, CREATE VIEW, ALTER SESSION, CREATE the SEQUENCE at the time;
GRANT CREATE SYNONYM, CREATE DATABASE LINK, RESOURCE, UNLIMITED TABLESPACE to the hour;
GRANT RESTRICTED SESSION on time;
Now, you need to connect to your PDB. Connect as sysdba as usual, which by default connects you to your PIC.
$ sqlplus / as sysdba
You can see that you are connected to your PIC if you issue 'show con_name '.
SQL > show con_name
CON_NAME
------------------------------
CBD$ ROOT
Connect to your PDB by using the following command "connect sys/XXXXX@pdbtvts as sysdba" where XXXXX is your SYS password
You must be connected to your PDB now.
SQL > show con_name
CON_NAME
------------------------------
PDBTVTS
Now, run the script:
SQL > @?/demo/schema/human_resources/hr_main.sql
You will be guests 5 things
1 hr user password - enter a password
2. name of the default tablespace - type "users."
3. temporary with name - type "temp".
4 SYS password - type your real password SYS
5. connect directory - type in "
$ORACLE_HOME/demo/schema/log/"If all goes well, you will get:
PL/SQL procedure successfully completed.
Make sure you have things:
SQL > select * from hr.employees;
Really hope it works for you as it did for me. Here everything was simple for beginners luck.
-
Does anyone have a GRACoL compatible chromaticity diagram CIE can I use?
I need illustrate an article on the theory of colours and want to use famous horseshoe-shaped CIE chromaticity diagram. Anyone know where I can find a clean printing in CMYK (profile GRACoL) mode?
(I am aware that the diagram illustrates a space much larger that can be printed. I will use it to illustrate a concept, so they are not a problem for me.)
You can do such a diagram as follows:
1. Download this small text file:
http://docs-Hoffmann.de/ciesuper.txt
2. Rename in ciesuper.eps
The diagram is programmed in generic RGB EPS vector graphic with text only K CMYK.
3. choose in Photoshop RGB sRGB and CMYK = Gracol =...
4. open the file
5. choose high enough resolution, at least 300 ppi.
6. choose the Anti-Aliasing.
7. If necessary harvest. In my view, the schema should reach up to 1.0 for both axes.
8. Save as ciesuper - gracol.tif
The colours in these diagrams are intended only symbolically. Some authors refuse
to colorize all chromaticity diagrams.
Magenta points for the CIE primaries are omitted by writing a percentage sign
in the respective row (almost the last lines in the program), which means "comment":
% CiePrim
Similarly we get rid of the correlated color temperature chart:
% CTCurve
% CTText
Cordially - Gernot Hoffmann
-
default 10g Auto Gather Stats Job running NECESSARY or NOT?
Hello
our database is 10 gr 2
Operating system is windows
in my 10g database, I already have a regular job of running statistics which collects level schema statistics. There is only 1 schema of the application.
Is it necessary to permanently keep the Oracle default 10g Auto collect Stats Job?
If two jobs are running (default 10 g auto gather stats job running in the window management 22:00 to 06:00) and our stats of manual diagram gathering job (market every day at 7 to 11) then that statistical jobs would be examined by CBO. ?
should I deactivate default job statistics?
Thank you...Probably the Oracle supplied job is "smarter" that no matter what mechanism you provided.
I will disable your own job.
The Oracle supplied job only collects outdated statistics, outside office hours.
Your business brings together (all? / stale?) statistics during office hours. Your job may fail due to the ora-0054.
Collection of statistics of segment during office hours is not desirable. Collection of statistics of system during office hours may be desirable.----------
Sybrand Bakker
Senior Oracle DBA -
What is the best way to draw this diagram - circles within circles?
Please do not draw for me - I need instructions that I met this kind of diagram often and feel powerless and stressed out whenever I see them!
It should be easy - circles in circles which are then cut to the top.
Thank you very much
James,
For simple divisions of concentric circular rings like those of the OP, you can:
(1) create the necessary concentric circles (including duplicates) and create complete rings,
2) slide the Center with the tool in line where you want to cut and object > path > divide objects below.
Before dividing, hide/lock parts only not to cut, like the ring to analyze it.
This works in all versions.
-
zip file to create diagrams for Oracle and Oracle Discoverer Portal
Hello everyone.
Im trying to install WebLogic for forms and reports under linux,
I need the zip file to create diagrams for Oracle and Oracle Discoverer Portal
to run the rcu scrip.
Can someone send me the link where I can find it?
Thanks to advanced & happy new year to all.If you are a developer of FMw 11 g installation, you need not configure the portal or the discoverer, unless of course you plan to use these products.
When I installed and configured the FMw 11 g, I followed the * how to install Fusion Middleware 11 g forms and reports only [854117.1 ID] * (available via My Oracle Support). WLS and FMw share the Directory Home of Middleware. I accepted directories default installation (\Oracle\Middleware\) and WLS installed in \Oracle\Middleware\wlserver_10.3 and FMw installed at \Oracle\Middleware\Oracle_PFRD, and the Instance of forms at \Oracle\Middleware\instances\ft_inst. More Doc ID 854117.1, I chose only the following for installation in step "configure the components:
- Server - Oracle Forms and Oracle reports components
- Developer - Oracle Forms Builder and Oracle report builder tools
- Management components - Enterprise Manager
- The system - Oracle HTTP Server components
- Server - Oracle Forms and Oracle reports components
IM thinking I have need save the fmx in a directory of this tree and also the FMAS and configure ther formsweb agreeing with that.
It is not necessary. All you have to do is add the Variable environment of FORMS_PATH (EV) and include the directory where your files .fmb and .fmx will be created. This EV indicates forms where to find your forms Modules and libraries of forms (.pll/.plx) you can use in your forms.
The usefulness of the repository creation (RCU), you can download it here: http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Just scroll down for the * @ section additional software required and there is a separate download.
Craig...
Necessary insight as to how the Stats are cascaded to the index after updates.
SCENARIO OF• We have a process of intensive loading (100 s of the tables involved, several hours of execution). We collect stats diagram only on obsolete objects when executing to minimize the load on the system while the statistics come together at intervals (see the command below).
• There is a table with an index on column X
• When the table is inserted in during a charge process column X is null and that the index is empty.
• When the table becomes stale (and the column X is null of remains), his stats get generated using the package gather_schema_stats with the STALE 'COLLECT' and ' CASCADE = TRUE options.
• Subsequently, all records from the table are loaded and the collection of statistics has occurred, column X happens to updated with the values so then inserted in the index. More no record is inserted into the table.
QUESTION
After the charge fit more no record and the table never gets denial as defective if new stats are not generated (no surprise). However, what is the impact on the index which now has lines in there (as a result of updates that occurred after the loading table has been loaded)? When the stats were executed on the table (with case sensitive = true) index was empty. Do I need a work of gather_stats separated on the index or somehow, it will inherit the values associated with the full table optimizer statistics? _
Here is the command I use:
exec dbms_stats.gather_schema_stats (ownname = > 'UICONNECT',-)
Options = > "FADE TOGETHER",
estimate_percent = > dbms_stats.auto_sample_size, -.
method_opt = > 'for all columns size auto ' -.
degree = > dbms_stats.auto_degree;
Cascade = > TRUE);
This problem is forcing me to understand the optimizer (viz has know statistics) more than I hoped would be necessary. But alas... developers ask me if I need to manage (correctly)!
Thanks in advance for any idea on this issue (or references to good material... it's hard to google it).
Published by: TonyG on July 14, 2010 14:10
Published by: TonyG on July 14, 2010 14:11
Just to clarify one thing:
"Cascade" not "copy" table to the indices statistics.
Cascade just make sure that you don't have to hard-code calls individual gather_index_stats. So this means that its index stats are also gathered, based on what is in the index.
This means that the generated statistics will be inaccurate, once the column is filled, as probably the key indicator, the clustering_factor, of the index will change.
So yes, his stats should be re-assembled, or you can decide (when the grouping after load factor is relatively constant) to block these statistics and to exclude the gathering.
HTH
-------------
Sybrand Bakker
Senior Oracle DBA
1. download the detail of a database.
2 draw each diagram on a large 'map' in a drawing application.
Can someone point me to source advice to help me start (need more inspiration on this one)?
Maybe there is a plugin D8 for this type of problem. I have studio 8 (but not limited to the use of this!).
Thanks, I've already explored FT programs and do not want to pay for another. I have a website, but have always struggled with the diagram. You are looking for something more flexible that I drew these individually. I learn so not afraid to have a go of Studio 8.
Overview of Sierra blacking out diagrams in PDF
When you view a PDF user manual, and some of the diagrams are blackened. Read properly user manual front of Sierra. A new pdf download does not help. The document is displayed correctly in SC6. All the patches?
Hi, Mike V Nano.
I see your message that your PDF document is not correctly displayed in the preview for macOS Sierra. I'll be happy to help.
As you notice this with several pdf files and these files seem to be display correctly in another app, looks like you have isolated this problem with preview more precisely. First, open preview and choose Exit in the application menu in the menu bar, or press command-Q to close the application. When you re - open preview, hold down the SHIFT key on your keyboard while you open the program. This will temporarily prevent the application to reopen his documents and its windows. A test to see if you still notice the same problem after you perform this step. If you haven't already done so, try to restart your Mac to see if the problem persists as well.
If the problem persists after trying the above steps, I would like for you to start in safe mode and test for the problem there. Take a look at the following resources for more information on this process:
Try safe mode if your Mac does not end commissioning - Apple Support
If the problem persists in safe mode, it may be a good idea to test this behavior in an another user account on your Mac. This will help you locate the problem. Take a look at this Web site for more information:
How to test a question in another account on your Mac - Apple Support
Have a great day!
Is a customer VPN as necessary Incognito on MacBook?
I've recently updated Sierra
Yes if yu to connect to public networks and you don't want your ISP know what sites you visit
Maybe you are looking for
-
Preferences of Firefox to go to the homepage when it starts. Home page is a blank page. If I quit firefox to one page other than the home page, and then start it again goes to the page it's on, instead of a blank page. Very annoying.This feature is o
-
Satellite C55D - A - 15 H - application of Bluetooth
I just bought this laptop and to be honest knows very little about them. The problem is the Bluetooth button to turn on & off is grayed and I don't seem to be able to access. In addition, to find in device manager, you must click on the items that ar
-
Satellite A100-411: yellow mark (!) in device after installing XP Manager
Hello I just get the Satellite A100-411 new but I want to downgrade the preinstalled windows Vista to Windows XP Pro.After Installing Win XP, I have no sound and the WXP 'driver manager' shows 'other devices' - Ethernet controller - device modem on h
-
Problem with update of Windows 7.
After my computer run an update to Windows 7 it's a reboot without displaying message me. How can I avoid this and only to restart the computer when I'm ready? Thank you.
-
Word & Excel permission on drive c
Hello 1. I copied a word file in together to change to a local user as omid ntfs permissions, & c car connection $ Windows with omid user, but I can't edit that file, this open read-only, if I put change your permission on drive c hole it works, but