M4: Regulation of the CPU power and fan - tablet is running hot and noisy

Similar Questions

• Why my custom control consuming 30% of the CPU power?

  Hello

  on my laptot C2D 2.0 GHZ if I open just VI with custom control I developed it consumes about 30% of the CPU power. Could someone explain why? Is also my problem with this control? I see it with 8.5 and 8.6 as well. It must be linked to its representation since when I hide the disepears problem. Thank you

  Good so I was right. It seems to be the combination of the hover button effect and radio. When I used the default control of LabVIEW to create my custom control the problem disappeared. Although I would like to hear a logical explanation why this was happening.

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• Epson Stylus Photo R2880, tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Hello

  This looks like a good question for the support of Epson.

  Help and Support - Epson America, Inc..:
  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  Concerning

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• Satellite L850 - error of cooling and slow down the speed of the CPU even when fan to 80 c

  So, I have this problem that my fan stops turning when the system is under load and then turns on, starts running at the speed of 100%, an error which says error with cooling system, laptop computer back to the service.

  The fan slows even when the laptop cools completely, it only returns to normal speeds once I closed the laptop.

  In the last few days, which has stopped completely. Now the fan won't even middle speeds even though the CPU temperature is 80 C. Due to the bad news of cooling time score about 70 ° C, even at idle.

  The laptop is almost a year. I already had this problem after a week of buying it, and they replaced my processor. I have windows 7 x 64, amd 7670 m and 2350 m i3.

  I wonder if this may be a BIOS problem or I have to take for the service? How can I stop this from happening? And Yes, my power plan is on high performance.

  AFAIK the cooling fan is controlled automatically if you don t have a any influence on it. Temperature sensors are placed on the motherboard and they control the cooling fan activity. That one possibility to change fan cooling activity is to change the option in the option of cooling method (advanced power settings > Toshiba saving settings).

  In my opinion the best solution for you is to contact the nearest Toshiba service provider and ask for help.
  They have diagnostic tools that you can check all this.

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• Simple Script Execution: Days and only using 15% of the CPU power

  Dear community,

  I have a data file (.tdm) with 17 channels of waveform point each containing 13742499 data. I want to delete all the data points that are not actual load points. I have build a canal ("LoadTrigger") that is a trigger for points of interest. With the following script, I tried to erase the im not interested datapoints:

  Dim RowCount

  Number of lines = 1 to GlobalChnLength

  ChnVal if (RowCount, "/ LoadTrigger") = 0 THEN

  Call the DataBLDel ("1-17 ', RowCount, 1" ")

  End If

  Next

  The script is now running for more than 20 hours with no result. Can someone please tell me if I am wrong in my script, or if there is a way to make it faster?

  In addition, I wonder why DIADEM uses no more than my cpu power? As you can see in the photo attached DIADEM mainly use a carrot and never more than 15% of the CPU.

  

  Best regards and hoping answers of construcitve!

  If you try to delete rows based on conditions, you can use code like this:

  Option Explicit
  
  CreateExample
  
  "Make sure that the correct group is active.
  
  data. Root.ChannelGroups (1). Activate
  
  ' chncalculate allows you to set values that match a NOVALUE condition
  
  Call chncalculate ("Ch (1) = Ch (1) + CTNV (0 = Ch (1))")
  
  'Delete the lines that contain a NOVALUE in channels '.
  
  Call ChnNovHandle ("[1] / [1]", "" [1] / [2]'-' [1] / [3]'","Delete","XY", 1,0, 0)
  Sub CreateExample()
  
    data. Root.Clear
  
    Dim g: g = given game. Root.ChannelGroups.Add ("group")
  
    Dim c1: set c1 = g.Channels.Add ("c1", DataTypeFloat64)
  
    Dim c2: set c2 = g.Channels.Add ("c2", DataTypeFloat64)
  
    Dim c3: set c3 = g.Channels.Add ("c3", DataTypeFloat64)
  
    I have Sun: for i = 1 to 100
  
      C1 (i) = I mod 2
  
      C2 (i) = I have
  
      C3 (i) = i * 0.00001
  
    Next
  
  EndSub

  that will remove all lines that contain a 0 in the first round.

  

  will be converted to

  

• Computer using only 50% of the CPU memory and 124%

  So when I'm doing intensive tasks (that's to say working in first and then simultaneously connecting clips to compositions of AE and work on them) seemed to me recently to hit massive roadblocks. So ive been editing a project for the last 2 weeks with silky ease. Render times were really low and I was doing enough after things heavy effects. Now all of a sudden in order to export a clip that took me like 1 or 2 mintues before takes like 10 minutes and my computer says that 124% of my cpu is used, and only 10 GB / 32 GB is used. When I RAM preview the same thing. How can I get my memory to be used at 100%? Why the body/AE is now tend to be so slow. Is there something wrong with the program or my PC? How can I optimize those programs so no foreign interference performance?

  Thanks and any help would be really appreciated.

  There is no way to AE or Premiere Pro use 100% of 100% of the time resources. No programs are built this way. You must ensure that you do not die of hunger for other applications of CPU power or memory. I saw so many screenshots of the AE memory settings where people thought they were doing a good thing when they drove their memory allocation in AE so they don't leave enough background apps to function effectively. Think in multiples of 4 GB of memory. If you are running an earlier version of AE, which allows you to assign a CPU to ensure that there is at least a pair assigned to other apps and that AE will use anyone who is left.

  Usually if you follow the recommendations of Adobe (Optimizing after effects of performance - Support Adobe) you will do quite well. Choose the good readers of storage, don't fill them past 80%, close all applications that are not necessary for your work and to organize your projects and the workflow in an effective way, then you're not made things twice or construction projects that would make in much less time if you made and replaced complex effects rather than rely on dynamic links or nested comps for all. You should also understand what kind of success your source footage is added to the project. Highly compressed source files (especially mpeg video) can easily take 3 or 4 times more time to decode as a format of good production. Stabilized warp clips must be rendered, clips that have temporal as mixing time, interpolation effects and other effects of time based will probably benefit PreRender before you apply other effects and make you save a lot of time in the long run. I can't give you a list, you need to know some things on your own and you need to know when the render time of 4 images per second is a good time rendering and when 5 minutes per image is also a good. As gain you experience, you will get a handle on it.

• Satellite A35-S159 - can I upgrade the CPU, GPU and HARD drive?

  Hey

  I have one in my possession and I wanted to make a good game.

  I don't know if I'll be able to cause. It hurts thinking may be able to put a processor duo or quad, and I do not know if the CPU will be able to support a really good graphics card, and I also think about changing hard drive.

  Any1 know what hard drives are compatible with what I can use which are good for games?

  Hello!

  I m wondering that you want to upgrade this old notebook. In my view, that a new laptop would be a better solution.

  On the CPU and GPU upgrade I can only say s is not possible and not Toshiba support. The GPU is soldered on the motherboard and t can be exchanged.
  I think you should read this: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  The HARD drive can be upgraded. This isn t a problem.
  AFAIK the A35 Satellite is equipped with a s IDE HDD and this means that you buy a drive HARD IDE interface up to 128 GB.

  Good bye

• Firefox, the CPU usage and unresponsive.

  This issue began when I * lost * all my modules (https://bugzilla.mozilla.org/show_bug.cgi?id=1290457) after the update to 47 FF... Then I downgraded back to 46 FF. Soon after, my HD failed (and the problem has ceased to be a problem, of course). However, Firefox runs slowly now. I know I have a few extensions and it ran slowly before - but now with a new SSD in the machine, I thought he would steal.

  I tried to diagnose whether there could be the link - but then I found that it is unlikely (because I can't imagine a bad connection, causing the CPU to spike)-(see images). In general, it is still using a lot of CPU--but, 3 to 7 times per HOUR, it crashes (second image); in fact, it happened three times JUST while I was typing this bug report.

  I was informed by a volunteer (I think) to download the extension "Gecko Profiler" and perform a scan.

  Here are three links to the data (I think the third happened * during * one of the episodes "don't respondents not"):

  https://Cleopatra.IO/#report=c00b64c17745769d47192a885151781dc9438e70 https://Cleopatra.IO/#report=c7abdc6b83d90f54dad1b04281f46b16bf44739d https://Cleopatra.IO/#report=43d908fec8b7bf87d2026b059b2f788b37d3308f

  But I have no idea how read/interpret.

  Can someone please give me an idea of what is at the origin of the hang-up? I really don't want to switch to Chrome (how can they insist that the tabs be * higher * the address bar?) but, that starts to look like my only option (which is a shame, because I've used this browser since Netscape family, for years and years...)

  Thank you!

  Start your computer in safe mode with network. Then launch Firefox. Try safe sites. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• Question about the CPU load and memory...

  Hello. I'm a South Korea network engineer.

  I am facing a problem with the DMP 4400.

  I made a web page to publish the DMP 4400, but she loading has been so slow.

  I don't know why it slows down, but it may be because of the memory or cpu.

  So, I need to check the CPU and the memory usage...

  is there anyone know control order CPU and memory?

  I searched documents and web site include Cisco, but I couldn't know.

  Jinsung salvation,

  This should give you the amount of memory on the device:

  https://:@:7777/get_param?p=sinfo.memory
  

  It should I think give you the CPU:

  https://:@:7777/get_param?p=sinfo.load
  

  Kind regards

  Nicolas