M40X-175 of freezing on the way of stand-by

Similar Questions

• Symbol for 'Not' or 'No' freezes on screen 5/8 of the way in a reboot.

  I had a problem with Mail and while in system preferences it froze. I had to force quit sys prefs out and decided to do a reboot of my machine. After restarting the screen shows a darker light gray background with a grey Apple logo. Below a status bar which advanced until he got about 5/8 of the way through and stopped then the screen to grey with a grey symbol I'll call the international symbol for "not '. '. You know, the circle with the diagonal line through it? What does this mean and how to solve this problem?

  stop and remove any external devices on your mac (you can leave the power supply connected), restart and reset the PRAM

  https://support.Apple.com/en-us/HT204063

  If that does not correct the boot problem in single-user mode

  How to start your Mac in single user mode or verbose--Apple Support

  and at the prompt, type

  fsck-fy

  When finished type

  reset

• MacBook pro freezes when the mouse stops

  I have a very strange problem with my Macbook Pro 13 "Retina display.   When I login, the system freezes once I have stop moving the mouse.  If I permanently move the mouse, the system works, but if I stop moving for about 2-3 seconds, the system hangs and I have to force turned off using the power button.  I have troubleshooted all the way to the bottom for a pure install of El Capitan 10.11.6 but even after cleaning install it always does the same thing.  Of course, it looks like a HW problem but I just wanted to see if someone else has had this problem and if there was a solution that was not related to HW.

  mblas49 wrote:

  I have troubleshooted all the way to the bottom for a pure install of El Capitan 10.11.6 but even after cleaning install it always does the same thing.

  It would be more helpful if you listed what you've tried already, we can't look in your mind. But, run the Diagnostics to start.

  Diagnosis of Apple is not as complete as the software they use at the Apple Store, but it can pick up something. Depending on the age of your system, you'll use one or the other.

  https://support.Apple.com/en-us/HT202731

  Diagnosis - Apple Support

  Apple Hardware Test

  https://support.Apple.com/en-us/HT201257

• My firefox keeps freezing of the browser and when I check my CPU usage it runs to more than 200,000. It takes all of my CPU just to run it.

  OK, first let me start by saying I love Firefox, and it's the first sentence I had with her.

  I can browse the internet anywhere on any site, and it will freeze saying (not answer). When it does I can't do anything in the browser or close the browser. It blocks like this every 10 to 15 minutes and remains frozen for anywhere from 10 seconds to 10 minutes.

  I tried to disable all addons and update Firefox, adobe reader and java. When I opened my task manager when frozen, Firefox is running at 200 000 + K and the container plugin 150 000 + K I have preformed all possible control system, ran scans with my antivirus and all, the problem is not with my computer or memory, it's firefox. How can I fix? Should I uninstall Firefox?

  Try a new Firefox profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  Uninstall and re - install Firefox rarely solves anything, unless you do a new installation. A new profile is like 90% of the way to a new facility.

• Satellite R830 random freeze with no way to take back control - full fan speed

  Hello
  I've been Googling autour for a bit now, looking for a solution to what could be a hardware problem.

  Randomly my Satellite R830 suddenly freezes and the speed of the fan running at full speed. It's actually a useful way to be immediately aware that my computer crashed. Everything is frozen, the only way out is to force via the power button.

  I hit the same description on several Web site for different models of Toshiba, return of 2009. It seems that the problem is still there! I also read testimonials from this problem for Windows and Linux OS. I use a Debian Squeeze, which does not detect the newspaper when the accident occurred.

  Sometimes it can be fine for a week, but recently, the computer freeze at least once a day, which is not acceptable for a new laptop.

  I am really getting concerned if something will be done soon, or if I should ask for an Exchange and pray to be spared. I use my laptop on a daily basis for professional use, and so I would definitely prefer another solution. I have been waiting for 4 months now and just update my BIOS 3 days ago from Web site of Toshiba with no noticeable improvement. the computer crashed 4 times in the last 2 days.

  If someone managed to overcome this problem, I would be very grateful for the tip!

  Hello

  A question: do you have a fingerprint reader?

  I got this Toshiba document that describes a problem similar to yours.
  This problem can be caused by old fingerprint software you need to update this software where you have a fingerprint reader.

  + Intermittend hang up or freeze your machine (possible high rotation FAN) on Windows 7-32 Bit / 64 Bit +.
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

• Satellite L300-1AQ freeze on the Welcome window

  Hello

  Can anyone help please. I have a satellite L300-1AQ

  the problem I have is:

  It was working OK. One day the next it would freeze on the Welcome window.
  The only way I could get it to start was F8 safe mode.
  And then it would freeze once a few minutes done repair my computer and Toshiba HDD recovery now it starts without going into safe mode but it still freezer a few minutes.

  I also tried swapping the ram from this laptop. with that out of a friends, I always freeze

  Thank you
  MB

  OS vista Home premium 6.0.6001 service Pack1
  Processor inter (R) Core 2 duo CPU T5800 @ 2.00ghz
  2048 MB RAM

  > the only way I could get it at startup has been F 8 then mode.then course it would freeze after a few minutes did fix my computer and Toshiba HDD recovery

  As I see it, * Toshiba Hdd recovery * does not solve your problem. You checked with the other memory, but it always freeze. so, I guess that a hard drive can be a troublemaker. If your laptop is still under warranty, you should contact them (SAV)

• Satellite M40X-175: widescreen driver

  Nice press release on the widescreen technology

  However, I have lived the next bad thing with a purchased M40X-175 on 08/04/2005

  Out of the box the screen 1280 x 800 was only recognized and drives like a screen of 1024 x 768, leaving the bottom lines 32 with random data and half black right.

  I have described this problem clearly enough for the helpdesk to the Netherlands, but they could not solve the problem in 2 sessions paid upport (0.5 Euro / minute) about 40 minutes total and about hours-3 man of my site. Support staff had never heard of this problem? !!!

  After reinstalling the recovery cd is still not luck.

  That I noticed that there is an upgrade of the bios of the 26/07/2005. However there is no rejection note on the bios (obviously to avoid lawsuits against toshiba) I decided to update the bios. To my surprise, every thing seems to be ok now! (This should have been answered in 5 minutes by support in my opinion because it is impossible that only my laptop is wrong...)

  The biggest problem now is marketing strategy. Although all points are now led Windows XP is always grateful screen 1024 x 768 but the format of the screen is now extended to 1280 x 800 but I expect the real resolution of 1280 x 800. I think Toshiba must create a special monitor XP driver for the LCD for this resolution or someone has another solution?

  Hello Peter

  As far as I know all the drivers, tools and utilities designed for any laptop model are tested until the unit turns to production. It also means that all the tested drivers are integrated into the recovery image.

  Sometimes you can see a black border on the screen, but it can be solved by changing setting called BIOS display stretching. It will be interesting to know what resolution showed after the first start.

• 6910p hang/freeze on the screen of the POST to the linux reboot.

  Hello, I'm new here, with a 6910p and a very specific question that's bugging me.

  Laptop was purchased refurbished a few days with Windows 7 and works very well.

  Almost immediately, I have installed Linux, try OpenSUSE, Ubuntu and Debian so far, and if I issue a reboot it always freezes at the POSITION screen, the one with the HP logo next. Stop down and cold boot however still works perfectly.

  Restart the work as expected to Win XP, Vista and 7, but not Linux. Tried three different internal hard drives, flashed the BIOS six or seven times of XP and Vista (e.17 and F.19 versions alternating), and what annoys me more, is that I can't find an option in the BIOS to disable the HP splash screen and more I can not turn it off, I'm sure he's hiding vital information that lead to my success. I'm bugged.

  I would like to know if you have any idea about this problem, I think if maybe that linux is not giving enough time for a device to stop and restart, or something on this line, but the truth is that I am lost on the high seas, and I fear that it might be a symptom of a defective hardware. Also give up on linux would be a bad option, because I need the multi-user environment, multilingual and virtually every machine other that I'm running a linux distribution.

  And if you know how to remove the HP logo at the position screen, I would be grateful, it is possible on my pavilion desktop computer, but I can't find the same option in the BIOS of the 6910p.

  Lots of love

  Michael

  Edit 1: Disable the BIOS flash card reader solved the problem. Now on to understand what Windows and Linux is not to make it work without restart was. Guess I still need to post on this forum to group ideas

  Edit 2: card reader Flash active and empty does not restart. Compatible with a card inside will be bork. It's so much easier when you know where to look. Namely etc etc...

  This mark as resolved: reboot did wait a few seconds so that everything has shut down, and discovered that there is no way to disable the HP logo at another startup then by modding the BIOS.

• Satellite A200 - STARTING problems, freezes on the connection of the power adapter

  My 3 YO A200 (PSAF3A-08202D has developed a problem with starting.
  I can start on battery power with WINDOWS VISTA BUSINESS (after 10 attempts, but freezes immediately when the power adapter is plugged in.)
  Display sometimes boots wide-screen, but mostly freezes before windows welcome.

  When running, the battery produces about 1 to 2 hours before a complete evacuation.
  When executing a battery, computer freezes when I plug Charger AC/DC immediately and going with my A100 charger as an alternative.

  Initial problem was a faulty hard drive and super hot air flow due to fluff the cooling block fan.
  Tech replaced original 120G HDD with 500 G and reloaded at the factory. works well for 3 months, then started with the same problems so conclude original disk HARD was just a secondary issue.

  So maybe fixed I overheated components on the motherboard. Reset of data cards initially fixed a problem starting but is gradually degraded.

  Reading through the forums seems that there is a huge amount of these laptops with similar issues. Is this a design flaw, like my other Satellite A100 is solid as a rock. All forums, which suggests resetting the cpu is running slow or be disconnected seem to be temporary repairs. Boot in safe mode and reset the default settings have no effect.

  A suggestion that a capacitor is at fault seems to be the fix is valid but which involves specialized tools is not available locally. Local agent of Harvey Norman for Toshiba are best part of unnecessary because they can send in Australia from Toshiba. Machine has been close to $2000 and is now worth Zip.

  I am unable to do anything with this machine, as all the ways of upgrading or resetting calls for AC power available and running.

  I'm about to do radical things and hope that this forum can enlighten us.

  Hi Mickaël

  You might be right. It seems that the motherboard is affected.
  Don't know why but higher temperature can still affect the internal parts.
  The temperature may increase if cooling fans n t working correctly. For example dust or debris leads to a higher temperature because cooling air cannot circulate properly.

  I have to clean my laptop's cooling grilles from time to time using a jet of compressed air. This allows to keep the temperature at the lower level.
  Of course the internal temperature is not always a reason for portable computers hardware malfunction equipment can begin to malfunction as always in an other products too: TVs, cars, game consoles

  I bought an extended warranty for my laptop, also for my LCD TV mercy always if a high-end product begin to malfunction and in the case of a warranty claim, the fault can be fixed free of charge.

• Satellite P300-h-13: stops, restarts itself and then freezes in the BIOS

  Hello

  I have a laptop TOSHIBA SATELITE P300-h-13.
  When I turn it on, it starts before blocking immediately down and then it restarts itself (twice).

  Then it freezes in THOSHIBA default start screen.
  I can't access BIOS (says it charges but nothing happens).

  If I press the ESC key, I got a screen saying that the processor is detected and it gives me the ability to L2 cache, it says the RAM passed and then it indicates that the Bios system & video are overshadowed.

  I tried without the battery, but it doesn't change anything.

  Please help me solve this problem on.
  Thank you!

  Hello

  I don't know why this is happening and it's really strange question that should not happen on the new laptop.
  In such situations, you can simply try standard measures and see if it will work properly again.

  By the way: how old is your laptop? Have you noticed this behavior from the first day?

  In any case, try to enter in the BIOS somehow and set it to default settings. try to enter Advanced boot options using F8 at the start and check if the installation of operating system work (during the first backup of data, if possible).

  If nothing helps I would recommend not to do anything, but contact the nearest authorized service provider. Let them check your laptop computer and, if necessary, repair. Warranty will cover all costs.

• Freezes and the screen turns after stopping

  Hello

  I'm having a lot of trouble with my iMac, Retina early 2015, and I can't understand what is wrong with it. The problem is that if I use the mac for a period of time, it can sometimes be almost a whole day, at other times, it may be an hour. It has all suddenly freezes them completely and the only way to get it to work is to make a difficult stop (hold the power button until it turns off).

  But when I try to turn the screen does not light. And I still have to make a hard, sometimes stop, it takes about 5 - 6 times before the screen lights up. And if the problem occurred once and I try to use the Mac immediately after, it freezes in the first 10 minutes, and the whole procedure must be repeated for another 10 minutes of use. The only way for it to not freeze is if I use it for like a day, but it gives me only about 3-4 hours before the problem occurs.

  I sent it to a repair shop for repair, I thought that maybe it's the hard drive. They ran a few test Apple and was told that it is not the hardware, but the software causing the problem. Then they plant restores and gives back to me. But it does not solve the problem.

  Any thoughts on what could be the cause of this?

  It is impossible to say without knowing what siftware you may be running. A report of EtreCheck please http://www.etresoft.com/etrecheck

  You can also do a physical check of base using Apple's Diagnostics using Diagnostics - Support Apple Apple

• does not and the freezing of the computer...

  My computer keeps freezing.  It will be the circle of hour glass thing and is the only way I can get the computer to turn off by holding the power button down.  It will freeze and the computer screen turns white and everything's going to say (not answer).  What should I do?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why the movies I burn more freeze towards the end?

  I tried what is called free software burning like nero and imageburn, etc, etc. Add infinitum, you can't really do much unless you buy all while most of these lie just to get on a search page, so I bought a software called copy 123 & share and lets it freeze at the beginning a little, but only a few movies but almost everyone I did since then freezes and then jump towards the end of the film? Every now and then maybe it starts this way through 0. Is there something I can do? Someone said to slow down the burning process but I remember a while burning a movie in much less time than the time or so it already takes to burn with this software and I did not gel upward or jump? I have a friend who says he found a free burning software online that did all that in half an hour? does anyone have advice?      Thanks, Ben

  Video requires a lot of resources of the pc, for most memory & virtual

  memory. Is the pc maxed out with ram memory, video card, these

  parties must be in the performance category, similar to the game of online video.

  Also, in properties pc, advanced, virtual memory, make sure that its game of 'let '.

  management system... " ATI video cards get a free dvd encoder, fee to NVIDIA

  for one...

  You can also open the "Event Viewer" locate the freeze time, see what

  the operating system reported.

• Venue 8 Pro 64 GB updated to Windows 10 freezes to the Lockscreen

  My 64 GB coming 8 Pro has been updated to the latest version of Windows 10 build 10856 version 1511. When I try to start it, the safe freezes to the lockscreen, screen you get before the connection. Plus, the lockscreen is in Portrait mode, even if the Tablet is placed in the landscape.

  I can't connect to the Tablet, and as it is, it is only good as a paperweight. Any ideas on how can this be repaired?

  I love the Tablet and use it all the time. Help, please.

  DanielNTX,

  I thought about your response and realizing that I have the team spirit on the Tablet, I decided to try to connect remotely with the tablet. I was able to connect, and a simple mouse click got me to the login page. Apparently, the 5830 Chipset Driver_67YC3_WIN32_603.9600.2067.27988.A00. Somehow, EXE has stopped working properly. Fortunately, I had saved a copy of this driver and reinstalled, and now the Tablet works fine.

  While this was not the way you suggested, I think that using the OTG cable and a usb hub, I perhaps was able to connect a mouse and a keyboard for the Tablet and have solved this way.

  Thanks for your suggestion. Problem solved.

• My Blackberry Smartphones BlackBerry keeps freezing on the loading page!

  Hi, I had my blackberry for a few months and only recently has he is not able to go beyond the black screen with "blackberry" and the loading on it bar!

  I tried to delete a contact from my bbm status thing and it just cut off! The gray loading bar constantly freezes three-quarters of the way along and does not move further.

  I tried many things, but none have worked, I was wondering if anyone knows how to move and stop it to halfway along the bar of freezing?

  Thank you very much.

  Hi and welcome to the Forums!

  Since you did not specify on what you have tried, we risk redundant advice. So, the first thing is... at all times a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  If it does not, then do it again, but leave the battery for at least 10 minutes. Makes no sense, I know... but sometimes it helps.

  If who does not work, then please clarify exactly what you were doing... "remove someone from my bbm status thing and just cut" is not terribly useful for diagnosis... Please be as precise and detailed as you can be.

  Best!