M50 - 180 Grafik problem

Similar Questions

• Graph and Sounddrivers for Satellite M50 180 and Windows 7

  I installed Windows 7 on my M50-180, but I can't find a driver for the sound and graphics.
  Something does not exist, or are there drivers to media, which works on Windows 7

  Best regards from the Germany

  papa99

  This old model of laptop is not designed and not supported for Win7, so it won't be easy to find the right drivers for this good old classic.
  Only alternative drivers are hardware manufacturer, but I don't think old material will be supported for the new operating system.

  How old is your M50? It must be about 4 years old.

• Access to Boot to install Satellite M50-A-110 problem

  Hello

  I just bought a Satellite M50-A-110 and wanted to install Win 7.

  Problem is that I have difficulties to access the bios press F2, esc, or DELETE...

  It worked (twice) if I could change boot USB (with a bootable USB key that I used on other computers to install win 7), still does not begin to earn 8...

  So I formatted the hard drive to get rid of all the partitions and win 8.

  Replaced the hard drive, insert the USB and now I have this message:

  "Reboot and select proper boot device."
  or Insert boot media in selected boot and press device any key..."

  So my questions are:

  -Are known issues with the m50-a-110, in the start menu? and what is the key / key combination, that I push?
  -This would be installing win 7 can only be achieved with a USB 3.0? (2 slots USB 3.0 and USB 2.0)

  Thank you for your help in advance and good luck,

  Hello and thanks for the comments. On a site I m happy to know that you have solved your problem, but on the other hand, it is not the best solution.

  Have you really taken apart your laptop to access the CMOS battery? I mean, after this action, your warranty is no longer valid.

  On this forum you can find numerous threads about the same question, where is explained what needs to be done about it and what steps are required to install Win7 on new models of laptops with preinstalled Win8 / Win8.1.

  What needs to be done first is the full stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After doing this, it is possible to enter the BIOS settings and change the secure boot settings.

  I just hope that you have created a recovery (DVD or USB) media until you have formatted your HARD drive.

  In any case, good luck with your machine.

• Equium M50-164 - Touchpad problem if an AC/DC adapter is connected

  Hello

  Can anyone help? My Toshiba Equium M50-164 has intermittent problems with the touchpad. Sometimes its fine, sometimes the cursor will jump around the screen, out of control, then comes oneself, the problem goes away when I remove the power cable and returns when it is reconnected.

  Other times it is fine with the power cable plugged, it suggests maybe the power supply causing a problem for me, but I was hoping that someone with more experience could give me some advice.

  Thanks in advance.
  lbansal

  Hello

  You are using an original from Toshiba AC adapter or to a 3rd party manufacturing?

  It's not easy to say what the reason is, it could be a problem of AC adapter or motherboard.
  I think the best way is to contact you nearest authorized service provider. Go to them with the laptop and the AC adapter and ask a technician for help. They can check the laptop and the material.

  Good luck! :)

• Equium M50-192 - startup problem

  I have a recently purchased EQUIUM M50-192 who developed a problem starting, a week after the purchase. To try to put the following happens
  Press the button power
  Turn on the light appears
  H/D light access appears
  CD-ROM flashes twice
  Then cut the power

  It passes through this sequence also if I open the lid, which suggests that the pc is in standby, IE opening the lid starts above sequence, as if you press the power button / stop.

  The same happens to a power supply (shows, seeing attatched and battery charge indicator) or only to batteries, also tried with battery but running.
  Have tried boot boot from CD via the F12 key and power at the same time but no luck with that, as mentioned above, I think the computer think it is somehow sleep and does not need to access the restore normal startup sequence. Can't find anything in the documentation re this implies a fault. Currently may not resume as collateral as abroad with out the paperwork he's come up with, for the next 6 weeks.

  Any ideas?

  Thanks in advance

  Hi, have you tried to remove the battery and then put back? Is also the adapter work correctly is the status light indicate a complete change?
  If you still not the laptop so that it starts then you don't have much choice but to the send it to Toshiba for investigation.

  Richard S.

• Equium M50-244: loop problem internal ati2dvag.dll

  I had a M50-244 XP Home Edition (sp2) who have ATI onboard until I uninstalled it completely. The laptop has become totally useless vomit ati2dvag.dll inner loop problem and nothing seemed to heal so I decided to completely get rid of ATI.

  It started with VGASAVE which, with a few adjustments, work is fine and so my machine now. I disabled the video as controller he kept coming up with "new hardware found" and I didn't load the drivers more who would do what he started crashing again.

  Currently its on 'test' and I'm doing everything possible to see if it will crash once again, I hope not.

  Maybe I need another driver and activate the video controller, but I am hated for doing anything more now that his works normally, finally!

  Some said the installation of the graphics driver on the site omegadrivers.net and improves the performance of the graphics card.
  Maybe an installation of the driver from the site could be useful.

  Check it out

• Satellite M50: laptop freezing problem

  Hello

  Problems with a fairly new M50. Recently it started to freeze, can only switch with switch / stop. It takes at least 15 minutes before trying again as it always freezes the OS front. But after that time will always leave you on the operating system. But sometimes it will freeze in the operating system after 20 minutes. Reformatted 3 times and had run it once for 3 hours, but with an error messages like "mobile political load failed" and the missing drivers. Later frozen after restart of the 3rd.

  Can't understand why the delay? Search for viruses, etc., expelled Toshiba but no found hardware probs? Any suggestions? Is it a super virus that damaged the HD?

  Hi Alaux

  You reinstall the operating system with the recovery CD?
  If this isn't the case, please pick up the unit with the recovery CD. This CD is put on trial and the laptop it works without any problem.
  But if you used the recovery CD and the laptop freezes and has problems, please, don t install any 3rd programs. Check if the laptop if it works to clean the BONES.

  Good bye

• White screen on model Equium M50-216 SM57E problem

  I'm having a strange problem with the computer screen... Start-up of the laptop... against the cold, the Toshiba logo flickers then the windows logo then flashes black... However, the screen is still backlit... The laptop works perfectly apart from that. I can connect to external monitors and it works very well, but here's the weird thing...

  I connected on three different monitors it works in 2 4:3 monitors. It does not work in my wide screen... when he starts the Toshiba logo comes up then the windows logo then just prior to the Welcome screen of windows (that blue thing at the beginning) the monitor says no signal.

  After a while the display on the laptop will appear and be fine until I stopped it (usually, sometimes the screen off, and without touching it's back in a minute).

  The white screen comes generally from when the laptop is started after being off for a while; For example, suppose that during the night... I simply closed the lid last night, and no do not stop correctly then when I opened it this morning the screen worked perfectly. There is no other display weirdness... bad pixels, lines, anomalies of any other nature.

  I recently reinstalled everything and the problem is still there. Please say it is (Hey! the screen comes back) a driver problem or something as simple

  Help with this (or even a suggestion) would be greatly appreciated
  See you soon
  Dave

  PS: everything works fine apart from this.

  Hi mate

  The story sounds very mysterious and my first thought is that it might be an unwanted material.

  But usually it of not easy to provide a diagnosis exactly and we should first check if the software doesn't cause questions!

  So first of all, it would be interesting to know if the same thing happens on laptop retrieved fresh. Using the recovery CD, you would get the factory settings!

  A BIOS and update the graphics driver are the following options!

  So check it out and let me know the results

  See you soon

• Equium M50: DVD works but no video image

  Hi, I have an Equium M50 and the problem is when I use the dvd out (s-Video on the side) I get desktop on the tv, but when I try to play a dvd or video clip he plays great on the laptop screen, but all I get on the screen is a black screen. I tried to update the card drivers but I already have the latest drivers.

  The F5 button switches between the thin screens and office discovers works fine on the TV when I do something else, that's just the problem with the black screen.

  Someone at - it an idea?

  Hello

  I think you first failover to the desktop and then you start the WinDVD for example.
  On my laptop, I have to do as described. If I first start the WinDVD and then switch the TV display I not able to see the film. Check it out.

  Also, try to activate or disable recovery settings in the graphical properties. I don't know if it should be enabled or disabled as a result plays a bit with the m option.

• Problem of graphics card on Portege series

  Hello!

  I had a real problem.
  I played DOOM95 on the book and after a while the book crashed, winXP crashed.
  Since that time, I have strange problems with the VGA card.
  If I install the drivers from Trident XP4 I get grafik problems in Solution Explorer and I can't starty any programm based 3d.
  By exempel 3dmark or Guild Wars.

  If I use WinXP driver standart. I have no probs but also no 3D support.
  I have managed to set up the book without Cd-rom with a RIS with a WinXP SP2 server.
  Same problem again.
  I hope someone has a sultion for this problem

  Sorry for the English.

  Greatings from Austria

  Hello

  Have you installed the latest version of DirectX software? As I remember the version 9.0 c is the most recent.

  After installing DirectX, start this tool by using the command: dxdiag
  Here, you must enable features such as Direct 3D and DirectDraw acceleration.

  I hope that this little instruction will help you

  Good bye

• Satellite M50 - big echo during playback of any audio file type

  My M50 developed a problem with its sound just now.

  When you play ANY type of audio file (music/MP3, internet/YouTube, Windows Media Player, no matter), sounds are played with a great echo.

  Opening the window of TOSHIBA Virtual Sound Settings and settings, don't change anything. In fact, I can't change anything - if I set the speaker type (say 'built in speaker' on 'closed type headphones', the sounds are the same.)

  I don't remember when the problem arises, but it seems to coincide with the upgrade to SP3 of XP. (I'm under XP Home).

  Any ideas?
  Thank you

  Hello

  I believe that no one will be able to say with certainty what the problem is here. I can imagine that Sp3 installed something and now there's this strange sound question.
  But I guess it's because of the sound settings. I don't know what player you use but check it please equalizer. Maybe there's something you can change and have good sound back.

• Equium M50 will not recognize the LAN port - error: disconnected network cable

  I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.

  I used to connect through a Modem/DSL switch "ADDON" and had no problems. I then replaced the ADDON with an ADSL Modem/Router "NETGEAR" DG834G to win the wireless port, and since that time my machine won't recognise the LAN port. .

  I know that cables are OK I used with other phones and had no problems. I can also plug a PCI card to connect without any problems. It seems to me that if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.

  Anyone out there with a similar experience and some tips/suggestions?

  PLEASE

  Hello

  For me this doesn't show t as a problem of LAN card but your router is a problem.
  Check Device Manager if the network card is correctly recognized. If there is no yellow exclamation point, so all is ok!
  You can try to remove the network adapter from Device Manager and reboot after new install driver LAN again.

  The question has looked after installing or connecting the new Netgear modem router.
  I would recommend to check first the settings or update the firmware on this router.

  I found more useful websites
  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  http://www.experts-exchange.com/Networking/broadband/DSL_Cable/Q_20381405.html

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• Equium M50-163 has sound-> ongoing echo problems

  As the title says, my Toshiba laptop has some problems with the sound. For almost a good 7 months now (I think that I got used to the sound, I hear an echo ' ') my laptop sound, that it either music or speaking in a film, has a permanent 'echo' (as if the sound was the mode of the room).
  There is also little or no bass. I tried to adjust the sound settings, but nothing helped, and it isn't the laptop speakers because the sound is the same with external speakers connected to my laptop.

  Can someone help me?

  Thank you very much

  Hello

  You have this echo effect only to watch movies or have you noticed that play games or streaming a video from the internet?

  From my experience of that many different 3rd party applications supported additional sound effects. These settings might be responsible for you echo.

  I also remember that the M50 series supports the virtual sound software. This small program changes the sound effects too.

  Select this check box. You should find it in the folder utilities Toshiba.
  As far as I know, you can change the settings of the sound from the built-in speakers, headphones and external speakers
  Choose the parameters of built-in details, speakers and opens.

  There are a few options that could create the echo effect

  Good bye

• Screen on my Equium M50 problem

  Hello

  new here so please bear with me.

  I have an Equium M50, recently the screen has gradually turned white, then move you the angle and it goes back normal tro, this wasent a major problem, BUT it's not all white. IM guessig its probably a cable issue, but uncertain and help or advice would be appreciatted and wouldn't be a repair I could finish?

  Mark

  Hello

  It s not easy to say if he e only one loses the cable or a serious hardware problem.
  I don t think you have enough experience and tools to solve this problem yourself.

  I mean that you need to check if the Fl inverter is ok and that the laptop computer s screen is not affected. How do check you this?

  In my opinion it s advisable to ask a technician for laptop computer to help him.
  Therefore, it would be advisable to contact the ASP in your country for a control of the laptop.

  Good bye