M6-1205dx network driver windows 7

Similar Questions

• Problem connection to external network drive Windows 7 Windows VM (VM Fusion v4.0)

  I'm relatively new to MAC-VMWare Fusion v4.

  On my old PC I use to have a shared disc on a remote support windows Center which I could map a network drive to a share using a user account defined local to the Media Center.

  I set up a virtual from Windows 7 on Fusion 4 computer and it seems to be running OK, i.e. can run applications and access the internet.

  However, I can not ping-access the correct Media Center by using the user account-profile.

  Please can you help so that I can remove my monster of a Windows PC.

  
  Thank you...

  By default, VMware Fusion sets the prompt to NAT virtual network adapter and you must set it to Bridged so the virtual machine is on the same subnet as the system you are trying to map a shared resource.

• Satellite A200 (PSAE6E) - the performance of the network driver Windows 7 64 bit

  Hi all

  First of all, I wanted to make sure that the A200 is capable of running with windows 7 64 bit. It seems to me, if we can find the right drivers, it can be done.

  If anyone has the same A200 running with Windows 7 64 bit. Please do not hasitate to tell us what drivers you use, and where we can find them!

  I tried and tried, some drivers, but one more matter, driver LAN well it works, you can get internet and Yes YOA can address another pc on your network, BUT not the speed aspect cause you get about 200 to 800 KB/s with file transfer (copy a dvd takes forever). Who can tell me where to find the TOSHIBA 64 Bit drivers that will work without problem. Of course, I know some 64 bit Vista drivers (not all) work with Windows 7 64 bit!
  I use rather pure 64-bit Windows drivers especially the chipset drivers and Lan drivers as these are the most important.

  I discovered:
  Bluetooth works (exclamation mark in device just after freshly installed Windows 7 Manager)
  Infrared driver works
  Touchpad will work (but should be mentioned to install the touchpad drivers synaptics and Alyps)
  His work (by default, Windows 7)
  Driver Broadcom decoder (required = for the exclamation mark in the Device Manager, does not know that one), I don't know if it works in 64-bit!
  TI Flashmedia (for SD card reader) will work, but I don't specifically know what driver it was.
  LAN, well there are pilots, but Don't work correctly (speed issues, even with Windows 7 32 bit) someone at - it suggestions?

  I probbably have forgotten something, but change all the info as soon as everything works as it should on Windows 64.

  English is not my mother tongue so my choice of words and their spelling ;-) can be totally wrong! Be gentle with this Dutch ;-)

  friend Niels

  Hope that this subject led to info A200 can therefore be fully functional with every oft Windows 7 anyone having trouble with him!

  Hello

  Therefore, it seems that you have problems with the LAN driver... So have you ever tried the 64 bit Vista driver? And Yes, I read your ad and especially to get your opinion on the drivers from Vista to Windows 7 but that s not an explanation. That s only your personal feeling but I guess you never tried right? ;)
  So try it and post your result.

  An alternative, you can visit the Realtek page. There you can download the latest LAN driver you should be working.

  Check this box!

• HP Pavilion Slimline network driver Windows 7 400 - 034

  Hello

  I'm looking for a driver for the CARD in Windows 7 for the network interface in HP Pavilion Slimline 400-034. I found that it once before and that you don't not saved when originally, I got rid of win 8. Now, I am due for a format and can't seem to find the driver.

  Can someone point me in the right direction?

  Thanks in advance!

  Hello:

  This driver should work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-100798-1&cc=us&DLC=en&LC=en&OS=4063&product=5231505&sw_lang=

• Vista Home premium unable to connect a network drive or find the storage network

  I have a hard drive attached to the network.  I've never been able to get my Vista machine to map to it.  Network discovery is on.  In the centre network and sharing, if I click on "View full map", Vista tells me 'Windows cannot create a map for the type of network connection', but on that same network card screen if I click on "view computers and devices", I can see the device that I want to connect.  When I try to get the camera when you try to map my network drive, Windows can not see it.  I can ping IP of the device, and I can't open the device html interface in my browser.  My XP and 7 machines see the end reader.

  Try the steps in belo

  http://www.RealGeek.com/forums/my-Vista-wont-draw-me-a-network-map-64463.html

• Get an error when accessing network drive

  When access to a network drive, windows Explorer stops working, the details of the problem has the information below:

  Signature of the problem:
  Problem event name: InPageError
  Error state code: c0000185
  Type of media loopholes: 00000000
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 3f99
  More information 2: 7b94c546746d8721f4815f57894d509c
  Information additional 3:4077
  Additional information 4: 957418e1c18d4eef54a00dc53de02605

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hi va3449,

  1. When was the last time it was working fine?
  2. Did you the latest changes on the computer?

  Check if you can access the network from mode drive safe mode with networking.

  Steps to start in safe mode with networking

  Note: Do not try the step below if you use wireless or internet Dialup Connection

  (a) restart your computer if it is running.

  (b) press F8 after your computer powers initially on.

  (c) once you see the menu Advanced Boot Options, you can stop tapping.

  d keys) use the up/down arrow to select your selection.

  (e) select Mode safe mode with networking and press ENTER.

  (f) you should see loading drivers and wait please.

  (g) you should then be at the Welcome screen.

  (h) logon to your computer using an account with administrator privileges.

  If you can access the network from mode drive safe mode with networking then I would suggest that you do own start-up to check whether a third-party program installed on the computer is the origin of the problem in normal mode.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic backup bookmarks to the Documents folder for this file history Windows stores up to my network drive

  Historical files Windows backup certain folders (Documents, music, photos, videos and office) on a network drive. How can I get Firefox to automatically save Favorites, for example when I leave FF, in one of these folders, for example "Documents"? While it is automatically saved in a place where the drive of my PC crashes.

  I spent some time googling this simple question and got many confused results and nothing to do with!

  Sorry, a feature like that is not available in Firefox, runs to move your entire profile folder.

  But this Pike Bookmark Backup extension is able to do this.

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Satellite 2410-504-driver Windows 2000 network missing

  Where can I ask for Toshiba create a network of Windows 2000 for my PC driver laptop Toshiba 2410-504? As you can see, Toshiba 2410-504 has drivers for the two 2000 & XP. If I install XP then I get everything works perfectly. If I install 2000 then I get everything works perfectly but the network card. Somehow the Intel PRO network adapter is not detected...

  You are right. LAN driver is not available for download, and I presume that driver LAN should not be installed separately. I found the info that this Satellite is supported for W2000 SP3. This means that this book must be installed with the W2000 SP3 to have all the features.

  Which SP is preinstalled on your laptop?

• network controller driver windows 7. HP 255 G3

  Hello. I have literally searched for days now a network driver. Those who must work, have not so far.

  When I got my pc I swapped the original HARD drive (which comes with Windows 8), an SSD that has Windows 7 above.

  Under Device Manager it Miss currently drivers for:

  PCI encryption/decryption controller

  Network controller

  PCI device

  For network controller hardware ID

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C

  PCI\VEN_168C & DEV_0036 & CC_028000

  PCI\VEN_168C & DEV_0036 & CC_0280

  Hardware for the PCI device ID

  PCI\VEN_10EC & DEV_5229 & SUBSYS_22CD103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_22CD103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Harware ID for Pci encryption/decryption controller

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  HP 255 G3 laptop
  Serial number: CND4381PKW
  Product number: J4R73EA

  Windows 7 Ultimate 64 bit

  Hello

  For network controller hardware ID

  Series of Qualcomm, Atheros Wireless LAN Driver QCA9000

  Hardware for the PCI device ID

  (the driver of the card reader for XP, Vista, Win7, Win8, Win8.1

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Harware ID for Pci encryption/decryption controller

  Run SlimDrivers FREE

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• All user accounts Windows XPrestricted open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder

  Hello

  you have a problem with my Windows laptop that left me speechless.

  I would really appreciate if someone could provide a solution or any ideas where to start fixing this, as I get close to return to the previous backup full system, but reluctant to do so as I have never done it before so I'm worried if it really works as supposed (Macrium and Ping).

  1. description of the problem

  All users of Windows XP (SP3) restricted accounts open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder, including My Documents.

  However, all accounts administrator work as before and also user accounts work like so usual, they are included in the Administrators group, with respect to the clicks of the workstation and records.

  In addition, the correct icons for 'Drive' and 'Record' are visible when connected as long as administrator but lacking when logged as long as user restricted when you check the file associations by "open the folder and then click on Folder Options in the Tools menu.» Click the registry file types list. »

  2 solution unsuccessful attempts

  2. google and tried the solution to manually change the registry entries from Microsoft: http://support.microsoft.com/kb/321186

  "
  Start the editor of the register (Regedt32.exe).
  Look for, and then click the default value under the following registry keys if this problem occurs with folders:
  HKEY_CLASSES_ROOT\Directory\shell
  If this problem occurs with drives:
  HKEY_CLASSES_ROOT\Drive\shell
  Click on edit in the Edit menu.
  Type 0 in the value data box, and then click OK.
  Exit the registry editor.
  "

  (Fixit associated meanings has also not working for some reason, says that the Windows Installer does not run, don't know if the same problem...)

  2B. and then also tried the fix "regsvr32 /i shell32.dll" at http://blog.chron.com/helpline/2005/10/double-click-opens-search-instead-of-folder/.

  After these steps, the registry under "Drive" and "Directory" information are as attaché at the end read somewhere there should be a "find" under lock and key, as I have, but don't know if the subkeys under 'Search' are what causes weird behavior.

  If anyone knows and could provide what the values for the registry values must be in a system that works, would be nice to compare to possible problems.

  Unsuccessfully, with what precedes, to solve the problem, but noticed through that:

  2 c. When you are logged in as administrator, I am able to see and modify the registry keys concerned with regedit, considering that when logged in as a regular user, I get an error that translates roughly as "the key could not be opened [consultation]?.» Error in opening the key. "for"Default icon"and subkeys 'shell' to 'Drive' and some subkeys under"shellex ".

  Oddly enough, this is also the case even if I "Run with" regedit as a user belonging to the Administrators group when logged in as a limited user.  Could be the mechanism of Windows registry access.

  Noticed that the small group 'Users' did not have access to "Drive". Grant read access, even as the "directory" and other registry keys next to them, for "users".

  Now see the values of registry as a limited user, but the problem persists. Do you really know what to try next, after spending hours Googling for answers.

  3 computer laptop environment and other factors

  3. don't know if it's related, but perhaps that coincides the time and the possible reason of sage:

  I had the problem two days ago described in "account Administor doesn't have access to some files and registry entries" to http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_27415496.html.

  Zone alarm free firewall prevented changing the key of HKLM\SOFTWARE\Microdsoft\Windows\CurrentVersion\Run.

  Which was fixed as in the article above tweaking of Zonealarm settings so that changes are allowed.

  3. the environment of the laptop:

  Acer Travelmate 8204 laptop

  Windows XP SP3 with virtually all updates of installed Microsoft.

  Recent issues (related?) with the .NET Framework 4 updates and the repair facility. FixIt against MS to install MS Update and the Application works and reveals no problems, but the settings from-> Panel-> Add or Remove Applications said that it cannot change or delete NET Framework 4.

  ZoneAlarm Free Firewall version: 11.0.000.057, prevented possible culprit get earlier access to the registry, uninstall?

  Norton Antivirus version recently installed 20.3.1.22, possibly in conflict with ZA or bug?

  content 'Repertoire' 3 c registry key.

  HKEY_CLASSES_ROOT\Directory]
  "AlwaysShowExt"=""
  "EditFlags" = hex: d2, 01, 00, 00
  "ToolTip"="prop: DocComments.
  @=""

  [HKEY_CLASSES_ROOT\Directory\Background]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\ACE]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Directory\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Directory\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Directory\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Directory\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Directory\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EDSshellExt]
  @= "{29FF7AB0-BE34-4992-A30B-53A9D86EE239}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu]
  @= "{A470F8CF-A1E8-4f65-8335-227475AA5C46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\IObit Malware Fighter]

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Washer]
  @= "{6EE51AA0-77A0-11D7-B4E1-000347126E46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\CDF]
  @= "{67EA19A0-CCEF-11d0-8024-00C04FD75D13}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem]
  @= "{217FC9C0-3AEA-1069-A2DB-08002B30309D}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Monitor]
  @= "{7842554E-6BED-11D2-8CDB-B05550C10000}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\MyDocuments]
  @= "{ECF03A33-103D-11d2-854D-006008059367}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Nokia]
  @= "{416651E4-9C3C-11D9-8BDE-F66BAD1E3F3A}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing]
  @= "{40dd6e20-7c17-11ce-a804-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\UltimateZip DragDropHandler]
  @= "{2F860D82-AF3C-11D4-BDB3-00E0987D8540}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {ef43ecfe-2ab9-4632-bf21-58909dd177f0}]
  @=""

  3D 'Drive' content registry key.

  [HKEY_CLASSES_ROOT\Drive]
  @= "Asema.
  "BrowserFlags" = dword:00000008
  "EditFlags" = d dword:000001 2

  [HKEY_CLASSES_ROOT\Drive\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 38, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Drive\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Drive\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Drive\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Drive\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\CWDDriveMenuHandler]
  @= "{CCEFA845-DCDB-4A2F-8BED-DBE87CD198EC}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\GizmoShellMenuExt]
  @= "{AF859436-B9BD-4154-B594-2B8D1F4295A6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Glary utility]
  @= "{72923739-5A47-40A3-9895-25AF0DFBB9E4}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\LavasoftShellExt]
  @= "{DCE027F7-16A4-4BEE-9BE7-74F80EE3738F}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ReflectShellExt]
  @= "{DEBB9B79-B3DD-47F4-9E5C-EA6975BAB611}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\SDContextExt]
  @= "{70F8E90E-353A-47AB-B297-C576345EE693}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Symantec.Norton.Antivirus.IEContextMenu]
  @= "{FAD61B3D-699D-49B2-BE16-7F82CB4C59CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {59099400-57-11CE - BD94-]

  0020AF85B590}]

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {D6791A63-E7E2-4fee-BF52-5DED8E86E9B8}]
  @= "Menu of portable devices.

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions]

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""
  "DriveMask" = dword:00000020

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ShellExt]
  @= "{0B0D0025-9D78-43BF-84EF-6F308AC4D0CE}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {B 7988, 573 - EC89 - 11cf - 9 c 00-

  00AA00A14F56}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  It seems that I managed to solve the problem on my own. Did two things:

  1 set the registry keys determine programs associated objects 'Répertoire', 'Drive' and 'File' to the default values by using the settings found here: http://www.dougknox.com/xp/file_assoc.htm

  HKEY_CLASSES_ROOT\Directory\
  HKEY_CLASSES_ROOT\Drive\
  HKEY_CLASSES_ROOT\Folder\

  2. If you want to have permissions for group 'Users' to read all these keys in the registry. For some reason any access worked only partly for standard users.

  Not sure who finally solved this problem, but after I had finished 1. and 2. for the purpose of 'Record', by clicking on 'My computer' and any folder works normally for all users of the computer.

  I suspect that some recent installation of program which adds actions associated with these objects messed up the registry. Suspects are Norton Antivirus and dbPowerAmp.

  Thanks for the suggestions for this problem!

• Windows XP Embedded no initialization of network drives

  I'm developing a c# application that runs on Windows XP Embedded and recording data on a network drive. I mounted this drive in Windows like X:\ and set it to "Reconnect at startup.

  However, after the restart, if I run my application, I get an error "could not find a part of the path"X:\filename.csv"
  If I open windows Explorer, the network drive exists. If I double click to open it, the file exists. If I restart the application after you have done this, the application will then work perfectly.
  It seems that even if the disk has been added, it is not initialized at startup and can not be used by applications. Only when you manually select it become initialized.
  Is it possible to automatically initialize this drive to make it accessible?

  Create a batch file to perform the boot container...

  ; delay for 60 seconds
  PING 1.1.1.1 n 1 w 60000 > ZERO
  ; Removes current mapped drive
  NET use x:/d
  ; Remappe drive x
  NET use x: \\ThePcName\TheShareFolderName
  
  
  Right now, your drive is mapped, but it is not set to automatically connect at startup or the network connection is slow, manually by opening the Player X:\ you initialize it.
  The batch file waits 60 seconds in order to give time to pc to establish connectivity network and maps the drive, so the connection to the drive is there before running your program.
  To ensure that your computer never automatically disconnects / times out from the network.
  • Open command prompt
  • Type in net config server/autodisconnect:-1
  • Then press enter

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• Program running as local administrator in Windows XP needs to access a network drive

  I just write a batch file to automatically run a program in Windows XP as a local administrator.  I had to do to get the program to work right.  However, the program cannot access network drives to save the files even if the user who is connected has access to these network resources.  How can I give an a running program as a Windows XP local administrator the possibility to access and back up the files on a network share?

  I found a solution for this.  I had to add the same user a local administrator on the server with network drives.  This solves the problem.