M93p GROUND & PCI Simple communication driver

Hello world

I currently have a problem with these 2 drivers.

If I install the driver Intel AMT I217LM/82579LM, these 2 drivers to settle and all is OK.

The problem is that I can't find anywhere of .inf files to add in my imagery course.

Any idea for me?

Thank you!

Looking at the XML file I found the name of the .inf file used...

Searched and found in:

C:\Windows\System32\DriverStore\FileRepository\heci.inf_amd64_6282584de27de808
C:\Windows\System32\DriverStore\FileRepository\mesrl.inf_amd64_2ea3e14df74fac30

Solved.

Tags: ThinkCentre

Similar Questions

  • I have problems with my PCI simple communication driver

    laptop HP 2000

    I have troubleshotting my PCI simple communication driver problems I have no driver to install in my laptop

    Hello:

    Go to the page of the driver and support for your laptop, download and install the Intel Management Engine Interface driver found in the section chipset driver.

  • HP probook 6470b pci simple communication driver

    Have a computer laptop hp probook 6470b. Had to reinstall the operating system and can not find the driver of communication simple pci PCI VEN_8086 & Dev_1E3A & subsys_179C103C & Rev_04

    Also unknown device

    USB\Vid_138A & PID_003D & Rev_0104

    USB\Vid_138A & PID_003D

    Hope someone can point to where I can download the drivers

    Install the Intel MEI driver software for the PCI VEN_8086 & DEV_1E3A & SUBSYS_072D1025 & REV_04

    Install the software Chipset driver

    Install the software HP3DDriveGuard

    The drivers are here

    Kind regards

    ERICO

  • PCI simple communication driver

    Pavilion g6 sindows 64

    looking for driver

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_166F103C & REV_04
    PCI\VEN_8086 & DEV_1C3A & SUBSYS_166F103C
    PCI\VEN_8086 & DEV_1C3A & CC_078000
    PCI\VEN_8086 & DEV_1C3A & CC_0780

    Thank you

    Hello

    Intel Management Engine Interface Driver (MEI) | HP® Support
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-126573-1

  • Issue of "PCI simple communications controller" infamous with Acer laptop

    So, in a few words, the computer does not recognize the usb flash drives. On every attempt to connect the device, the sounds "connect device" is played and about 3 our 10 times the "driver installation failed" message from Windows. In Control Panel, area of devices, the flash disk is marked as 'usb 2.0 device' in the category 'unknown '.

    With the help of 3rd party software, the popular "unknown device identifier", "chipset Intel 7 series c216" were found in need of a driver. The WinUSB generic driver always worked perfectly for me on any machine up to now, well well so far, at least, so I install the supplied driver of Intel would be useless because I have not any usb 3.0 devices. I went down of Windows 8 (which was already installed on the computer acquisition) to Windows 7 for personal reasons, the funny thing is that I installed it with a digital copy through the flash disk usb that I try to open right now, by way of conclusion, the fault must be on the software.

    My mouse works perfectly, be connected via a usb port, I even tried with the keyboard that I use for my desktop pc and also works.

    So here are the things I tried and had no results:

    -possibility to install the driver automatically with Windows Update (1st attempt failed to find; 2nd attempt, driver is found BUT access is denied)

    -J' have that maybe if I uninstall the driver from "Device Manager", after a Windows restart should re - automatically installs the driver, but as above the same message "access denied."

    -Downloaded the Intel driver (ME 9: engine management pilot), with the error "failed to install".

    Is there a way to solve the problem of "access denied" so that Windows Update can take care of things? Or am I left with the only option of re - install everything again hoping that everything will work?

    Details:

    Windows 7 x 64

    Laptop model: Acer Aspire E1-531 (link to the form: http://www.acer.co.za/ac/en/ZA/content/model-datasheet/NX.M12EA.009)

    utilities of "driver finder" 3rd party frequently to be wrong and should be avoided, cleaning after a 'bad' driver installed can often lead to problems. You have available restore points?

    The USB 2 driver will be a part of the Chipset Intel package. Re download all the Acer drivers and install their drivers only when possible. Laptop manufacturers often use updated implementations of standard chipsets and their drivers that will take into account.

    Even if you do not use USB 3 devices, you should always install the necessary drivers to allow Windows to correctly list the material. Although the PCI Simple communication driver is often associated with the chipset Intel HECI/AMS-SOIL Management Engine, this device is not listed by Acer. It is also common with an analog modem.

  • HP compaq t4400: PCI simple Communications Controller Driver XP

    My PCI simple Communications Controller Driver XP is missing... where and how download? someone? Please

    This is my id hardware PCI simple Communications Controller Driver XP:

    PCI\VEN_104C & DEV_803D & SUBSYS_30B1103C & REV_00
    PCI\VEN_104C & DEV_803D & SUBSYS_30B1103C
    PCI\VEN_104C & DEV_803D & CC_078000
    PCI\VEN_104C & DEV_803D & CC_0780

    @strike88

    Try this one.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1849072 & swItemId = ob_70996_1 & swEnvOid = 1059

    REO

  • HP Compaq DC7700 Small Form Fa: Driver PCI simple communications controller windows 8.1 64-bit

    I can't find the driver for my PCI simple communication controller that is compatible with 8.1 64-bit windows. could someone point me in the right direction (if all goes well a link to the driver I need)? I have already spent a lot of time to research.

    As I wrote above... If automatic installation method does not work, you must manually install the driver.

    Here's how to manually install the driver...

    Go to Device Manager and click the controller of simple communication IBOS who need the pilot.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp34743.

    Make sure that the include subfolders is selected and the driver should install.

    Then restart the PC.

  • Satellite P500 - 1 CG - PCI Simple Communications controller driver for Win 7

    I reinstalled the system in my Satellite P500 - 1 cg, because it was in English and I use the Polish language.
    After the reinstallation, I have a problem and I need a "PCI Simple Communications controller / pilot.»

    Can someone help me on this?
    Thanks in advance for any help...

    Hello

    To be honest PCI Simple Communications Controller does not for me
    I think that there is a translation error.

    Please check this doc from Toshiba:

    How to identify an unknown device
    http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

    It helps you to identify the device and find the right driver.

    Welcome them

  • Ethernet and PCI Simple Communications Controller Drivermissing controller driver

    Hello

    I recently installed Windows 7 Ultimate on my desktop Hp Pro 3500 Series MT, but I can't the right Ethernet controller driver and the driver PCI Simple Communications controller from the internet.

    The Hardware IDS are as follows:

    Ethernet controller:

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C & REV_06

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C

    PCI\VEN_10EC & DEV_8168 & CC_020000

    PCI\VEN_10EC & DEV_8168 & CC_0200

    PCI Simple Communications controller:

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C & REV_04

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C

    PCI\VEN_8086 & DEV_1C3A & CC_078000

    PCI\VEN_8086 & DEV_1C3A & CC_0780

    Please help.

    E - IT says:

    Hello

    I recently installed Windows 7 Ultimate on my desktop Hp Pro 3500 Series MT, but I can't the right Ethernet controller driver and the driver PCI Simple Communications controller from the internet.

    The Hardware IDS are as follows:

    Ethernet controller:

    http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C & REV_06

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C

    PCI\VEN_10EC & DEV_8168 & CC_020000

    PCI\VEN_10EC & DEV_8168 & CC_0200

    Simple controller PCI of Communications: (it is in fact the interfaceur Intel Management Engine)

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = VC-93346-1 & mode = 4 & IDX = 1 & prodTypeId = 12454 & prodSeriesId = 5037931

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C & REV_04

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C

    PCI\VEN_8086 & DEV_1C3A & CC_078000

    PCI\VEN_8086 & DEV_1C3A & CC_0780

    Please help.

  • Satellite A-C55-1NU - driver PCI Simple communication

    Hello

    Little help needed here.
    I have laptop SATELLITE C55-A-1NU and win OS 8.1.

    Link with the record is here:

    http://www.Toshiba-Croatia.com/innovation/JSP/supportMyProduct.do?LNG=31&service=BL

    I can't find driver for PCI Simple Communications Controller Driver - where can I download it?

    Also off-topic (sorry) - there is no way I can connect laptop with TV (KDL - 32 p 2520) with HDMI: laptop recognizes it, but there is no picture on the TV (I tried splitscreen, duplicate and extend the screen)

    Thanks for any help

    Hi, vex

    Each laptop comes with preinstalled operating system must have installed all the drivers for all hardware components. Did you found a problem in the Device Manager or what?

    HDMI problem: according to TV specification, it must have two HDMI ports. Please make sure that you have enabled the right port on your TV.

    One last thing: don't forget to create a recovery media using preinstalled Toshiba recovery media creator tool. Mage recovery relief is very important if something goes wrong with preinstalled OS or HARD drive.

  • HP Compaq DC7700C PCI Simple Communications Controller driver

    Try to find my PCI Simple Communications Controller driver. No. chance what so ever was responsible of research on the net just found dead ends would someone please help me out here. Thank you.

    Win7 x 64

    Intel Q965/q963 Express Chipset Family

    Intel core 2 CPU 6400 @ 2.13 GHZ

    Hello:

    Download normally the HECI driver install this device.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3232028 & prodNameId = 3232101 & swEnvOID = 2103 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ir-46941-1

    If it does not automatically install, manually install it to leave the device in Device Manager and navigate to the installation folder that was created when you ran the file located in CWSetup\spXXXXX, where XXXXX is the number of the download folder.

    Make sure that the include subfolders is selected and the driver should install.

  • PCI Simple Communications controller driver

    I own a Compaq Presario Media Center PC, AMD Desktop SR2020NX

    The PCI Simple communications controller driver has an error in the Device Manager. yellow triangle. "The drivers for this device are not installed. (code 28) »
    I can't find the driver for it. I can no longer do a search through this PC because I can't even connect to internet.

    It's the hardware ID

    PCI\VEN_1471 & DEV_0000 & SUBSYS_200C1471 & REV_00
    PCI\VEN_1471 & DEV_0000 & SUBSYS_200C1471
    PCI\VEN_1471 & DEV_0000 & CC_078000
    PCI\VEN_1471 & DEV_0000 & CC_0780

    This device is the fax modem. It is a rather antiquated device.  Do you really use it?

    I would like to uninstall the device and ignore the error message.

    This device is not the reason why you are unable to connect to the internet.  I suggest you find a PCI or PCI Express x 1 card network card and install it in one of the available locations.  I can't make suggestions on personal credit cards because you have not specified what operating system is installed. I'm fairly certain this isn't Windows 8. Your venerable PC is a bit too far back in the Windows 8 compatible PC platforms.  It's impressive that it continues to work after all these years.

    If you have installed Windows 7, then the simplest solution, especially if you have access to a router wireless, would be to install a dongle usb wireless for internet access.

  • PCI simple communications controller driver hp dc5800

    error message:

    PCi simple communication controller

    The drivers for this device are not installed. (Code 28)

    There is no driver selected for the item or a set of device information.

    found the answer:

    You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

    But the link does not work

    Not the product you are looking for? If you can't find your product on this site, go to theCentre de Support HP - Hewlett Packard Enterprise .

    Hi, @gm114 :

    You need this driver, like the one you need for your specific model is missing from the support dc5800 page.

    https://Downloadcenter.Intel.com/download/19697/Intel-me-management-engine-driver-for-Intel-3-series-chipset-based-desktop-boards

    HP has some major problems with the support pages they know but are moving at a snail pace to fix.

    In fact, a snail is faster, because from what I've observed, they have done nothing to solve the problem up to now, after more than a month.

  • Pavilion p6 series: PCI Simple Communications Controller Driver

    Hello

    I am getting following error message:

    Ethernet controller

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C & REV_06

    PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C

    PCI\VEN_10EC & DEV_8168 & CC_020000

    PCI\VEN_10EC & DEV_8168 & CC_0200

    PCI Simple Communications controller

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C & REV_04

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C

    PCI\VEN_8086 & DEV_1C3A & CC_078000

    PCI\VEN_8086 & DEV_1C3A & CC_0780

    SM Bus controller

    PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ABF103C & REV_05

    PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ABF103C

    PCI\VEN_8086 & DEV_1C22 & CC_0C0500

    PCI\VEN_8086 & DEV_1C22 & CC_0C05

    Please help me find the right updated driver for the categories above. I've included the hardward ID under each category.

    Model # P6-2103wb

    Thank you

    A_SCOTT

    You are the very welcome.

  • PCI Simple Communications Controller driver for HP-Compaq dc5800 SFF

    In the device, other devices shows yellow exclamation with PCI Simple Communications Controller Manager.

    I found a few references to care packs, but none that really meet this model and the OS which is Windows 7 Enterprise 32-bit Edition.

    If you select the download button, it seems that here, the connection cannot connect to the FTP as happens with errors of popup like 425 can't open data connection.

    So two things has driver and is there a http download?

    Thank you

    Paul_Tikkanen wrote:

    Hello:

    You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3658082&prodNameId=3658094&swEnvOID=2096&swLang=13&mode=2&taskId=135&swItem=vc-78668-1

    Thanks that solved the problem of missing driver.

    Had to download off site due to firewall blocks FTP. But as an alternative would download flow anyway.

Maybe you are looking for