Mac can not find network Officejet 6500

Similar Questions

• iMac can't find wireless OfficeJet 6500 a

  Running Mac OSX 10.7.5

  No error message

  No changes been made to the operating system, the router, or the printer

  Last night, after that my computer could not connect to the printer, a problem generally solved by all simply restart the printer or restart my computer, I followed HP troubleshooting advice and remove the printer. Now, I am unable to find the printer my device list.

  I have connected the printer via USB to begin the installation, and then go through the steps to connect to my network and then unplug the USB connection when prompted. The HP setup assistant immediately told me that it can't find the device.

  Print to network printer shows no problem.

  I turned the radio on and outside wireless.

  I have reset the printer default network settings.

  I turned off the printer, and it was stopped for a while.

  I restarted my iMac.

  I checked for the update firmware on my router (Cisco/Linksys E2000) - there is none.

  I checked for the update of the firmware/software for HP drivers - there are not.

  I'm at a loss total and VERY frustrated.

  Everyone tells me to go buy a brother. Despite having bought just 4 cartridges of replacement, I can do exactly this.

  Unplug the USB cable from the printer (it was one of the problems - be connected during the installation tells the Setup program you want a USB connection).

  We'll start again.

  -Restart your router by pulling its plug momentarily

  -With the cable USB out, on the front of the printer: configuration > network > network by default.

  -Now, in the same network menu, run the Wireless Setup Wizard.

  Then download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Finally, restore the print system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• I cannot connect to the internet and can not find networks as well.

  Original title: a disc XP Wibdows will repair a missing msnuser file? I can't find all the networks to connect to the internet.

  After a router problem, I had to change the name of my network. All my other PC is connected. My Dell XP Pro has for some reason not configured to search for local networks. The only error message I got was 'msnuser file is no longer available.

  I have a brand new Windows XP in case of a crash Pro CD, but I don't want to try to find out that I lost what is already stored.

  This CD will correct connectivity issues? I could back up what I need if she wants. BTW: Dell has been no help.

  Thank you.

  Hello

  I you have to check out these items-

  http://support.Microsoft.com/kb/832161

  http://support.Microsoft.com/kb/870702

  http://support.Microsoft.com/kb/308007

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.microsoft.com/kb/322756 - how to backup registry.

  Let us know if it works for you.

• XP sp2 can not find networks (wifi) also connect to the internet. No problem with router as Vista works fine

  my old machine is broken down and wiped xp sp2 off the drive. I fitted another harddrive and reinstalled from xp disc. Installation was bad, so bought a new drive, the Installation went like in a dream, but my computer cannot find all the networks. The wifi dongle works ok (tested on vista) the router isworking well on my vista machine (find 7 networks) parameters must be wrong or the new installation was not so good Mmm tried to reinstall 4 times with the same result.

  Hello

   

  Thanks for asking!

   

  You can't connect to the internet.

   

  1. do you receive any error messages?

  2 what is brand and model computer?

   

  The question may be because the network drivers.

   

  To check that I suggest to visit:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

• XPS M1330 can not find network card after reinstalling Windows Vista

  Hi all

  I'm passing my computer to a member of his family and wanted to give them a new installation, so I used the disc of Windows Vista (32-bit SP1) shipped with the laptop and reinstalled Vista on the computer. Everything worked fine until I wanted to connect to the internet, then Windows tells that there are no available networks. When I chose "Why doesn't windows find all networks" he stated that "this computer doesn't have a wireless network installed and configured card". I put in the Dell driver and Utilities CD that shipped with the computer and installed the drivers which seemed related to networking or communications, but the problem persists. I guess it's some sort of driver problem (as the computer used wireless before the reformat (a few hours ago) and so the device itself seems to work.)

  I would greatly appreciate any help to get this race. :)

  Thank you!

  Hi Chris,

  Please share the system model and the operating system installed on your computer?

  If you are facing problems with the wireless, you can follow the steps below to check if the drivers are listed as installed in the Device Manager:

  • Press 'Windows' + 'R' key on keyboard.
  • Type "devmgmt.msc" into the box run without quotes.
  • In the Device Manager window, expand network adapters and verify if your wireless card is on the list.

  If the wireless driver is not present in the system and is displayed as a network controller in the section other devices with a yellow question mark, you can download the drivers from the link: http://dell.to/QjjZDA -> Enter-> the serial number of your system, select the operating system-> expand the category network to download/install wireless drivers

  I hope this helps. Please respond to the findings.

• old mac can not find the new mac for migration

  I'm trying to set up my iMac brand new El Capitan and any transfer of my old iMac OS x 10.6.8. The new Mac is former easily, by using Migration Research Assistant on two computers, but the old guard. Then another told me that the former, whom he knows, the name is not available. I use WiFi, lack of time, lightning or FireWire (?) whatever they may be. I could loose the ethernet to our wifi modem, if that works better, I have a Gdrive mini backup and which might be easier still.

  There is another identical question, starting in 2014, on the forums, but the answer is not relevant - I do not have a screen asking you to transfer when I started up the new iMac. (I also managed to get a screen insist on a Keychain password and it would not accept the password I put in place initially at first startup.) What is going on? I've never struggled with any one of our Macs back to 83 like this!)

  Thanks a lot for all the bright ideas!

  Follow the steps to move your content to a new Mac - Apple Support

• Try to uninstall Pure Networks Network Magic, platform Assistant works, how can I get rid of it, can not find in my system

  Have left nmrsrc.dll and 2 files nmspce2.dll.  Tried to delete it tells me that they are protected and hidden, do not know how to display them, nothing doesn't show in Add/Remove programs and windows search can not find them.

  PFure networks Platform Wizard keeps saying it has encountered a problem and needs to close, have removed the remaining files, but cannot get rid of these two.  What should do?

  Hello

  To view the files in XP follow these steps:

  a. in desktop screen click Start, then Control Panel, Panel Options.

  b. click on the view tab and check the box "see the hidden files and folders" and press OK.

  c. you will now be able to see all files and folders hidden on your computer. You can do a right click on the hidden folder and uncheck the hidden box and apply the changes to display it.

  See this article on how to uninstall Network magic: http://www.purenetworks.com/support/faq/13.html

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=104&VW=1&articleid=21926

  If you cannot uninstall the program, contact support for Network Magic team.

  Thank you very much for trying to help, find the files I had to remove, they do not delete found files in Mode safe and they deleted properly.  When I cliked show hidden and program files did not see them, Safe Mode works perfectly.  Good job!

• I have a problem with my location network cards and I can not find my LAN on my PC.

  I can't find my LAN

  Hello! Im having trouble with the location of my network cards and I can not find my LAN on my pc - I have recently updated my software with phone system automated.

  Hello

  Perform the steps in the article mentioned below and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Hope this information helps.

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Vista Home Premium can not find applications and networks.

  Vista Home Premium (manuf. installed) can not find applications (application to go to define associations in control panels?), does not recognize my wireless network and available restore points are only for dates after the problem has occurred.  If I buy a Home Premium DVD and do a clean install should I expect to get a working computer?

  Hello

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  Some system manufacturers use Partitions recovery and other methods to allow you to go back to a
  completely new facility. So check with your system manufacturer to see what options you must do
  - and it's certainly doable - just a question of the process the manufacturer of the system set in place to
  you.

  What are the system recovery options in Windows Vista?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx

  This tells you how to access the System Recovery Options and/or Vista disk (some manufacturer have other methods)
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  -----------------------------------------------------------------

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HP Photosmart C309a AiO Wireless on and work, can not find the network!

  My printer has stopped printing a couple of days.  It was fine, now it is not.  The blue light wireless radio is turned on, but when I run the network set in place, it works simply and can not find my network.  I ran the network diagnostic and it detects my network, but can't find my printer.  On the test page, it fails on SSID.  I could use some help to get this operational back guys!  Thank you!

  Well, I can't comment officially, but I'm sure that has been discussed in, and design changes avoid this problem.

  Regarding something is through HP, you could call the HP Technical Support and check if you have options to upgrade to a new printer. They should have a list of printers and prices offered as part of the upgrade process. There is no charge to call and check the options you have. If you are in the United States, call the 1-800-474-6836. Otherwise, click on the contact HP link at the top of this page.

• My laptop can not find wireless networks

  My laptop can not find wireless connections, that it works fine when I use an Ethernet cable.

  It works on 64-bit windows and has a intel wifi link 1000 series

  The most likely reason is that the wireless card is turned off or disabled.  Most laptops have this feature in order to save battery power if the wifi is not necessary.  Depending on your laptop, it is a physical switch or a combination of the Fn key and one of the F keys.  See your User Guide for more information.

  You can also check the Device Manager (click the ORB start and type Device Manager and then press the Enter key).  Expand the "Network adapters" section by clicking on the arrow to the left and then double-click the entry for the Intel Wifi Link.  Check 'Device status' in the 'General tab '.

• Updated to Windows 8... now can not find wireless network

  I've updated from windows vista to windows 8. Everything went well, but now the computer can not find wifi connection while it worked before the upgrade. Any ideas what's past? Or what I can do to find l ' internet and connect?

  Thank you.

  This 'upgrade' is really not much more than a NEW installation of the operating system.

  Did you visit the manufacturer's web page a computer for your computer model - more precisely their downloads and drivers for your system model - the article and enter all drivers of Windows 8/8.1 available to them for your if everything goes well supported by said manufacturer under Windows 8/8.1 computer system?  (This is a manual process.  Microsoft/Windows doesn't make or can't stand most (if any) of the hardware components inside your computer.  You must obtain and install these drivers yourself.

  The motherboard chipset.

  Hard drive controller.

  Video.

  Audio.

  Network.

  etc.

• I just bought Adobe Elements14 photoshop & Adobe premiere Elements14 I have an iMac and can not find the download for my platform.  There only Windows.  What should I do to get a Mac download?

  I just bought Adobe Elements14 photoshop & Adobe first Elements14 I have an iMac and can not find the download for my platform.  There only Windows.  What should I do to get a Mac download?

  Mariene salvation,

  Please find the links below to download:

  Photoshop:Download Photoshop Elements free trial | Adobe Photoshop Elements

  Creation:download first Elements | 14, 13, 12, 11, 10

  Hope this helps!

• Lightroom question: my mac crashed, had backups, installed new OS 10.11 EL Capitan, use creative cloud for PS and LR, where go my Presets to develop, can not find them anywhere, any suggestions, thanks.

  Lightroom question: my mac crashed, had backups, installed new OS 10.11 EL Capitan, use creative cloud for PS and LR, where go my Presets to develop, can not find them anywhere, any suggestions, thanks.

  
  

  
  

  Thanks for the info, will try that.

  Sent from my iPad