MAC filter list giving problems on EA6500 with bridge

Similar Questions

• HOWTO to Setup wpa2 + aes + psk with mac-filter WLC 4402 (RADIUS)

  Hello

  I'm trying to Setup wpa2 + aes + psk with mac-filter (RADIUS) on WLC 4402 (6.0.182), with Lap - 1142

  on security, the value L2 security wpa + wpa2 and make sure MAC filtering

  Uncheck the WPA

  check the WPA2, AES, TKIP to unckeck

  Mgmt PSK auth key

  PSK ASCII marker

  L3 no

  Uncheck the political web

  AAA servers

  Select enable accounting radius server server

  It's work fine, when I use WEP with mac-filter (radius)

  but when I select WPA2 is it fail and no newspaper both WLC server and RADIUS

  Is this limitation or bug...

  Thanks in advance for your help

  This sounds like it should work.  Maybe your client likes not wpa2/aes or does not match the PSK.  I would try to associate with this same configuration, but without enabled mac filtering to try to identify the problem.

  -John

• In the NAC MAC address filter list

  How are Faisal Hi, you? I have a question about this list of filters in the unit of the NAC. I want to do those recognized unit of the NAC mac addresses are to be get the network. However if a workstation's mac address is not in the filter list, would it not able to do the network. Is that the NAC has the ability to do? Please let me know. Thank you.

  Richard

  I'm not Faisal, but...

  You want to make additional (such as LDAP or such) or any authentication simply based on the MAC address?  If you want to only via the MAC, you can add them to the list of filters and then either set to 'allow' to allow all traffic, 'role' to put them in a specific role, or "check" to apply the evaluation of posture and then put them in the role.  If no other server authentication is configured, users who were not in the list of filters would not be able to authenticate, and they would be stuck in the authenticated VLAN.

  Thank you

  Lauren

• E3200 and wireless MAC filter will not accept the recent MAC formats

  When I go on the web interface for my Linksys E3200, Wireless > Wireless MAC Filter and try to add the MAC to my new laptop computer to work, the user interface returns an error which is the MAC address in the wrong format. I have triple checked the address and I tried adding several times without success.

  Looking at the address, I'm guessing that the beach is not what the user interface has been programmed to accept because it starts at a much higher range. The first 3 bytes of the MAC address is: 1 c: 3E:84:xx:xx:xx

  My wireless router is E3200 with Firmware Version: 1.0.04)is

  Is there any place on the site Web of Linksys I can drop a ticket?

  Never thought it would be a browser problem. I'll have to keep that in mind.

  The computer I was access to the admin of the router UI wasn't in the wireless MAC filter - highlights the filtering MAC wireless had a list of authorized Mac not refused.

  I think that the problem was because I have 6rd IPv6 configured. Some time after the validation, I needed to update the PPPoE password and got the same error. Disabling (cancellation of the configuration) IPv6 6 Dr allowed me to update the PPPoE password successfully. I've not yet returned and re-activated the MAC filter.

  Thanks for the suggestions!

• MAC filter via ACS for SSID using WPA2 PSK

  I HAV a SSID using WPA2/PSK for the safety of the L2. I would like to add filters mac via an external radius server. I just finished the configuration of the mac via external RADIUS Filter, but it does not work. PSK is supported with an external filter MAC? I am running the latest 6.X on the controller

  I came across this problem on a controller of 5508 using v6.0 - something (6.0.182 I think). Turns out be a fixed a bug (CSCta53985) in 6.0.188. Updated to 6.0.188 and used successfully ACS 5.1 for MAC filter with WPA2 PSK SSID.

  See the 6.0.188 release notes http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn6_0_188.html#wp605409

• Problems of lag with Safari/Youtube

  Hey guys, I had this problem for a while:

  When I close the Youtube tab (normally with a video) to get to the next tab, tab Youtube sometimes freezes for a few seconds before closing completely.

  Then Safari starts getting lag, "restless" and slow, even when I'm on Facebook or other websites in general. I noticed that my Mac starts to slow down too.

  The only way I have temporarily resolve this problem is to remove the story and the datas of Safari and start over. Or what Mac is becoming seriously lag is to restart (it happened seldom).

  This problem has occurred before the update to OS X El Capitan 10.11.3 (I thought that it improved...)

  Clues or suggestions on what to do?

  • I have never installed readers flash, adobe etc...
  • I don't have a plugins, web extensions installed.
  • I décliqués Plugin Internet on Safari, thought preference that he touched it...
  • This Youtube problem never happens with Chrome
  • I have a Macbook Pro OS X El Capitan 10.11.3, retina

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

• I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?

  I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?

  You can create another account on your mac.

  You can open an account with mailchimp.

  There may be a limit on the number of emails you can send per day. No idea about the number, but I've heard as low as 200 per day.

  R

• problem on copy with hp printer m127

  Hello

  Sorry! my English is not good

  I have a printer hp m127 and I have problem on copy with this printer

  When I copy an A4 of sandpaper or Charger do not print about 1 inch of the bottom of the page, but when I scan this page, it is OK and when I print the document scanned, it's too good

  I don't know why this problem exists

  Thank you very much

  Hi @hamidjoon and welcome to the Forums of HP!

  I see that you have problems with copy.  I would like to help!

  Before we start, I need a little info:

  I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Please let me know what you find.  Thanks for posting on the HP Forums!

• Add or remove programs list has an extra space with black blocks and white space.

  This problem causes the list to be VERY long with some programs listed at the top, and then, many white and black spaces blocked in betweent the rest of the programs.  I do not have autocad and I ran the .exe that true negative results in Exposeicon.  None of these have solved the problem.  I had this problem for a while, so I don't know what to install or uninstall caused this problem.  Does anyone know what anyone else for this problem?

  Thank you.

  I did some more research online and found another thread on this problem.  I downloaded 'Add Remove Pro' from the list of items on the list provided by this software and a list of the computer gives me.  I uninstalled a few programs that have been identified between the programs before and after the empty space in the list given to me by the Add/Remove on my pc.  After you have uninstalled a few things that have been in the interval and restartig the pc, the empty space is left.

• WRT600N - Wireless MAC Filter Table will not retain MAC for the Droid 2 phones

  Hello

  I have a Linksys WRT600N router and I succumbed adding our new Motorola Droid 2 to the MAC table on the Wireless Security tab.

  It allows access if I disable MAC filtering wireless and appears on the list of clients, but when I try to add the customer list or manually enter the MAC table, it does not retain it when I save it. The only thing that seems different from the MAC standard is the 1 byte

  (F8:7 B: 7 A: 76:98:22 is the MAC of my phone).

  I don't want to leave my network open and prefer to avoid using a WEP key if possible.

  Can anyone tell me what I am doing wrong or is this a bug? Y at - it a firmware update I have to apply to this effect in my MAC filter (current version is 1.01.36 build 3)?

  Oh and I'm not worried about hackers if as much as deterrence of neighbors stealing my bandwidth. To implement the keys on all my devices was too much time to consider unless a last resort. MAC filters make it also easier for me to add guests fairly quickly.

• Get the error code: 0 x 80041003 in Event Viewer. Events cannot be delivered through this filter until the problem is resolved

  Original title: - what the heck is - this?

  Can someone tell me what this means - in English?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I get this topic once per hour in my diary of events 'Application '.  The Source is: Microsoft-Windows-WMI and the event number is: 10

  Every word is understandable and I know what they mean, but how they are threaded and beat me to the syntax.

  Bill

  Thanks for the reply, Gerry.  I'm no stranger to computer, having started in 1962 in the Navy for 20 years.  The HD is fine.  I used the Hitachi software testing to verify this.  RAM is also fine after running MEMTest for about 17 hours.  CHKDSK shows up at all no error.

  I agree it could be caused by a hardware fault and looking for that I ran some tension and trials of O-scope on the motherboard.  The only discrepancy I found was Aida64 Pro told me that the 3.3V rail was only 1.75 v.  My DS was told that the rail was 3.327.  This led to the conclusion that maybe the sensor was messed up.  I have an almost identical computer with a motherboard in the same series and Aida reports that rail even as 3.319v.  So, I think that the motherboard may be offset slightly.

  The re - install is an easier way to remove a large number of applications I just didn't need more and had not touched in over a year.  Revo even would have struggled to clear the registry after such massive uninstall.

  I found that the results from a command prompt is quite easy if you issue the command once, read the results on the screen, and then do it again but to redirect the output to a text file ("' do_whatever > test_output.txt '").  All you have to do is cop0y and paste a post.

  This re - install and the subsequent installation of SP2, seems to have solved the error of the event: for now.

  Bill

• -Event ID: 10 error 0 x 80041003. Events cannot be delivered through this filter until the problem is corrected. »

  Title: event id 10 original

  my PC (Vista Home premium SP2, 2 GB of Ram) is suddenly restart and get a blue screen. What can I do to fix this error? It is after 2 weeks after reinstalling windows.

  Here is the error message:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be

  sent through the filter until the problem is resolved.

  -

  -

  10

  0

  2

  0

  0

  0 x 80000000000000

  2365

  Application

  Lory-PC

  -

  ./root/CIMV2

  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99

  0 x 80041003

  Hello

  1. Faced with this issue specific request?

  Try the methods provided below and check if the problem persists.

  Method 1:

  This problem occurs if the WMI filter is accessible without the necessary permissions.

  To resolve this problem, run a script to stop the event ID 10 messages.

  You can check the link below to solve the problem.

  10 the event ID is logged in the application log after you install Windows Vista Service Pack 1 or Windows Server 2008

  http://support.Microsoft.com/kb/950375

  Method 2:

  You can try to perform a startup repair if the system still hangs after trying this article.

  Startup Repair will try to repair startup issues in Windows Vista. To run the Startup Repair tool, follow these steps:

  (a) Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  Note

  When you receive the prompt press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  (b) select your language setting, and then click Next.

  (c) select repair your computer.

  (d) select the installation of Windows Vista to be repaired, and then click Next.

  (e) under System Recovery Options, select the Startup Repair tool, and then press ENTER.

   

  Note

  If the repair process detects a problem starting in Windows Vista, it will run Startup Repair to automatically fix problems. If this happens, click Cancel, and then click view the advanced management and system recovery.

  (f) click Finish when the Startup Repair tool is completed.

  (g) under System Recovery Options, click on restart.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  I also suggest you to run memory diagnostic tool to check if the RAM is good.

  To run the Windows Memory Diagnostic tool

  (a) click Start, click programs principally made and then expand accessories.

  (b) right click on command prompt and select run high on the shortcut menu.

  (c) at the command prompt, type mdsched.exe. If you are prompted, allow the action. You can choose to restart the computer and run the tool immediately or schedule the tool to run at the next reboot.

  (d) the Windows Memory Diagnostic runs automatically after the computer restarts. Windows Memory Diagnostic allows you to choose among three suites of tests of varying rigour.

• PROBLEM of ALIGNMENT with color printing

  PROBLEM of ALIGNMENT with color printing.  HP Officejet Pro L7680 all-in-One - using Mac OS x 10.6.8 - with USB connection & ethernet - without error message thank you.

  Hello

  What kind of problem?  Print quality problems?  You have run the alignment of the HP utility?

• Derivation Mac filter

  I have this network.

  How can I block Internet traffic to phones devices but not the traffic of the laptop?

  Cause, they are bypassing the Mac filter, due its packets encapsulated with the MAC of the netbook.

  There is a way that forces the router or switch to read the packets and found that fate is another MAC and is not in the approved MAC Table?

  filtrado.PNG

  

  There are two options from Cisco:

  • Cisco ASA with the power of fire
  • Meraki Cisco MX

• vRealize 7 - NSX Automation deployments fail due to problems of certificate with vRealize Orchestrator

  Hello community,

  After you have installed the latest version of vRA, vRO, and NSX I run questions when you apply components that use components of the NSX. First of all: details of the version:

  -vRA: 7.0.0 (build 3292778)

  -vRO: 7.0.0.16989 (build 331003)

  -NSX: 6.2.1 (build 3300239)

  vRO plugin versions are delivered with the vRO version listed above with the exception of the plugin NSX, which has been updated to the latest version (1.0.3 published on 17.12.15).

  In the configured tenant vRO is configured as endpoint. I can check the data collection is running and working. I can see the plugin NSX for vRO runs the workflow 'create endpoint NSX' from time to time using the configured user of vRA VRO.

  In the configured tenant vRO is thus configured as server default for ASD vRO. Connection test is successful. When you save the config I'm prompted to approve the vRO certificate, which I confirm. Note that the thumbprint specified matches the footprint of the vRO certificate that I get during the visit of the vRO system on https://vro:8281. I am able to navigate the vRO vRA designer workflows, therefore: connection seems established.

  Within vRO the vRA COFFEE and plug-ins IAAS have been saved successfully. I am able to browse the inventory of plugin for both plugins.

  To solve the problem, I created a new unified plan within the design section of vRA with the following configuration:

  -Transport box: my area of transport configured NSX (checked: manual creation on this area using NSX works very well)

  -Routed res pol. Bridge: my reference for the dash cluster to use Pol

  -The only component dragged to canvas is a 'network and safety'-> 'On-Demand NAT Network' that uses a profile preset 1-to-many network as is "Parent network profile" without manual modification.

  -Note that, although there is a plan very simple example to illustrate the problem, it happens with any model that I have set up if any component is confgured requiring the NSX plugin for vRO.

  "Whenever I ask this plan, the request fails with the error message:" ","application [fa1e0689-0d06-4308-a914-e498c0d1fd99]: 404 not found "

  Looking in vCenter, NSX and vRO I can check that nothing is really trigged when you ask for the action plan.

  Consider the vRA /storage/log/vmware/vcac/catalina.log becomes very visible:

  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.isEndpointAlive:88 -
  vRealize Orchestrator endpoint with url [https://s00-vro.my.domain:8281/vco] is not alive. 
  Exception message:> [Host name 's00-vro.my.domain' does not match the certificate subject provided by the peer (CN=s00-vro.my.domain, OU=VMware, O=My Company, C=DE)]
  
  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.getFirstAliveEndpointByPriority:200
  - vRealize Orchestrator endpoint [https://s00-vro.my.domain:8281/vco] with priority 1 is not alive. Skipping.
  
  org.springframework.web.servlet.mvc.method.annotation.ExceptionHandlerExceptionResolv
  er.logException:189 - Handler execution resulted in exception: Endpoint not found. There are no vRealize Orchestrator endpoints that are alive.
  
  com.vmware.vcac.platform.service.rest.resolver.ApplicationExceptionHandler.handleHttpStatusCodeException:673 - 404 Not Found
  org.springframework.web.client.HttpClientErrorException: 404 Not Found
  ...
  ...
  ...
  
  

  Please note that I double checked the certificate. This is a self-signed certificate created using the 7.0 vRO new control panel, the one I get when you go to https://vro:8281. It is valid and the object (issed to CN) matches perfectly the hostname entered the ASD and endpoint configuration in the vRA. It is separable and time on all components of the server is in sync with the use NTP.

  Now, I even re-generated certificate and re-registered and rebooted all the components, but while I can see that the certificate has been updated all components I always get the same question.

  Never had this problem with the previous version of the NSX / vRA / vRO. I checked the documentation if nothing has changed here, but did not find what I'm doing wrong. Anythimg I'm missing here? Any bug?

  OK, this seems to be the issue. So put atleast to previous day since version ofvRO (cannot check if it's true for charges vRO 7 installs as well but it is probably) vRO 'control center' will generate certificates based SHA1 vRA love not for actions that use the endpoint in the vRA vRO. ASD seems to work without these problems.

  Sidenote: VRO upgraded installs will also come with SHA1 based CERT if they use a self-signed cert created by vRO. However: you would think that it is sufficient to recreate the cert using the control center. But it turns out it isn't, because it will generate a (new) based SHA1 cert.

  What I did to solve the problem:

  1. create a vRO SSH2 based certificate without the cert extensions, similar to the one that ships with built-in vRA vRO. I tend to use xCA for these jobs, but openSSL will do as well. The exact format required for the certificate of vRO is not documented, but I can make sure you need it like this: PEM certificate in key private and public including format PKCS #1, formatted as follows:

  -----BEGIN RSA PRIVATE KEY-----
  (Your private Key: your_vro_server.key)
  -----END RSA PRIVATE KEY-----
  -----BEGIN CERTIFICATE-----
  (Your primary certificate: your_vro_server.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your intermediate certificate: intermed.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your root certificate: root.crt)
  -----END CERTIFICATE-----
  

  I had problems when I used the key extensions so I would say you don't use and don't create a very basic cert without extensions V3, as indicated on the right of the image to my last post (ideally, you want to have a cert with the same properties as the cert is used by the device of integrated vRO vRA unless of course different CN) etc.).

  2. use the vRO control center located at https://your-externa-vro:8283 / vco-controlcenter / #/ and move to--> Orchestrator Server SSL certificate certificates. Use the action to import to import your PEM cert. It should tell you that you need to restart your device vRO. Then RESTART the device (for not just restart the service, this seems not be sufficient).

  3 al ' vRA remove the Endpoint vRO everywhere wherever it has been configured. Also, I removed the vRO to the ASD config just to make sure that nothings left.

  4 reboot the vRA power (IAAS can be left as what). I needed to do this because I have seen that the keystore at some point would keep beeing crushed by CERT vRA (?), I deleted it (AND I checked that they are deleted) reappears in the keystore after a while. After a reboot, the problem was gone, the keystore was clean.

  5. Add the configuration of endpoint and ASD vRO. Accept the certificate.

  6. the works.

  Therefore, while I have no more time to solve the problems more than I guess the problem is the SHA1 function certificate generated by the device of vRO. The internal unit is equipped with a SHA2 based cert that works and after that change the external device SHA1 cert in a basic cert SHA2 all works.