Not available when the connection network connectivity

Similar Questions

• "Default gateway not available" when you connect to a wireless network

  Why can't my computer connect to the internet wirelessly? I diagnose the problem and he told me that the default gateway is not available. I do everytime I turn on my computer and it does while I use it sometimes too. I made sure it wasn't the router; I have reset and turned it off and everything that has recently obtained another supplier of the internet with a new router and it has the same problem.

  Could you do a few steps to see if communication with your router is OK?

  I assume that you are connected to your wifi router, but it lacks the gateway address.
  1. go in Control Panel (click on the windows logo and choose Control Panel)
  2. in control panel, click on network sharing Center
  3. in the network sharing Center, click on wireless network connection
  4. in the State of the wireless connection, click details...
  Here, you are supposed to see detailed information on your Wifi connection.
  Important addresses are:
  Address IPv4 - e.g. 192.168.1.2
  IPv4 subnet mask - should be 255.225.255.0
  IPv4 gateway - is the one who seems to have difficulty - should look like 192.168.1.1 (but may be completely different), but must be the same 3 first issues that the "IPv4 address" in my example 192.168.1.
  What are your numbers?

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• I see no photos when it is on EBAY. I can see them in Chrome and explore, but not Firefox. It says Image is not available when the image should be.

  When I'm on EBAY (or other sites besides) in the region where there should be pictures, I get a message saying:
  Image not available

  This just started a week or two ago. I am able to see the fine images by using other browsers, but not Firefox. Any suggestions?

  Oh... If it affects all sites, please read this article: solve the problems that cause to not show images.

• Spider sometimes works ok, sometimes in the rendering mode.__sleep and hibernation software are not available when the software rendering mode is running

  I have an ASUS K501N laptop.running 7 Home premium.

  Sometimes when I turn on it the office/display is not so strong, if I click on Spider I get a flag your who says run the game in software rendering mode hardware acceleration is disabled or not supported by your video card driver happens whensleep and Hibernate options are not available.

  Other times that everything works correctly.

  Anyone know why and how to remedy

  Hi leflaneur,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. when there is no sleep and hibernate options available?

  4. are you able to play other games on the computer?

  Method 1

  I suggest that you enable the acceleration of the display on the computer and check if the game works.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on display settings, and then click Advanced settings.

  (c) click the Troubleshooting tab, and then click change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) move Hardware Acceleration complete.

  Method 2

  If the previous step fails, then you will need to download and install the drivers for the graphics cards updates by visiting the card manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not available for the laptop network printer

  Hello

  Laptop of my wife had to be repaired and the operating system has been restored. She lost access to the printer on the LAN. She still has access to a drive external hard connected network. Two computers on the LAN are Dell, laptop computer Studio and Inspiron 530 desktop computer s. They have all both Vista Ultimate SP2.

  Network discovery screen shows these settings for your laptop; File sharing, Public folder sharing (read-only), password protected sharing off, media sharing, printer sharing (printer offline installed). When this parameter is expanded, it shows "there is no printer attached to the computer. The printer is HP Photosmart D7260

  I have exhausted my ability to fix this problem and I am looking for help!

  Thank you

  Frank C

  Hello

  I guess that the drivers of the printer to be installed on the computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• open files are not detected when the research network file sharing

  Original title: cannot locate the file open in research

  Why when I search a document on my disk sharing (Windows 7) it will not display if someone else is open?  Is there an easy fix for this?  It comes if I scroll down, but if I search for it, it will not draw the document.  It is only when someone else is open.

  Due to complications involving the server shares, please create a new post on the TechNet support forum:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Some features not available when the contents of the tags are used

  So the new function of Adobe Muse that allows for content to be applied and adjusted tags on different device site is based is great. However, I noticed when these tags are used, certain features appear to not work. Examples: In a setting of text marked with a content label, you can not "BOLD" specific words. Also, you cannot paste into a chart and apply the text wraps. Unless I'm missing something, is somewhat a disappointment.

  No you're not missing something. This currently limits for Muse. It is a relatively new feature that I am confident will grow as Muse is changing.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Download cannot do error "microsoft accout service is not available on the moment.try later" when connecting to the Windows store.

  Original title: cannot download

  I connect to the windows store but I can't download the error msg is "microsoft accout service is not available on the moment.try later" pls help to connect where you'll store thank you.

  Hi Haran,

  Generally, this problem is due to Server related questions or changes due to the new computer. Before you start with the troubleshooting steps, I would like to know some information about the same thing.

  1. have you made changes on the computer before this problem?

  2. you are connected to the Microsoft Account or Local account?

  3. are you able to connect to the Windows site using the same Microsoft Account?

  4. are you this question while trying to download or trying to install applications?

  Initially, I you suggest to try to restart the computer and then try to download or install the application on Windows Store and check.

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the steps in the following Microsoft Help article and check if it helps.

  Why can't I connect to the Windows store?

  http://Windows.Microsoft.com/en-us/Windows-8/why-sign-in-Windows-store

  Method 2:

  Try the steps in the Microsoft Help article and check below if the problem persists.

  Why can't find or install the application on the Windows Store?

  http://Windows.Microsoft.com/en-us/Windows-8/why-find-install-app-Windows-store

  Please reply with the status of the issue, so that we can better help you.

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• iCloud library is not available if the system library is located on a network file server

  I moved my library on an external hard drive, that drive is directly connected to my router via the USB port.

  I can make pictures to my library of photos and pictures of charge very well. I've set the library to serve the library system:

  

  But, by selecting the option of using iCloud library gives me this error message "iCloud library is not available if the system library is located on a network file server.":

  

  I have the ability to connect this external hard drive to an iMac which is used as a server, I just prefer not, but if it's the only option I want.

  So in short, can I use this configuration? If so, why the error message and how to cope.

  Thanks in advance to all.

  That's right - the library needs (for iCLoud, use of the library and for the safe operation) to be on a local wired connection - may not be on a network connection

  LN