Failure configuring windows updates current portable window7

Similar Questions

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.

• failure configuring windows update

  configuration windows updated sometimes twice a day, updates download scussful then restart configure up to 15% then failure, to seniors revertingback, then works fine, til reappers message every day.

  "I followed these instructions but they warn me that this updae cannot be installed in Mode without failure.  When I thought how to restart in Normal mode.

  Since then, I have not known the laptop appeared this exact error message, I'm assuming that you thought you could only install this through the normal start screen.

• Failed to update Windows 8 (KB2756872, KB2768703), happens to 30% then get error "failure Configuring Windows updated. Changes in return ".

  I installed 2 updates.

  I installed both of them using the standalone installer which.
  First, I checked the updates using Windows updates and then installer of stand-alone download from the link more information if I can use this update later.

  Here are the 2 updates I try to install:
  1 Windows8-RT-KB2756872 - x 64
  2 Windows8-RT-KB2768703 - x 64

  I rebooted my system after installing the updates.
  Windows configures updates up to about 30% and the system gets stopped and restarted.
  Then he went it 100% and all of a sudden, I got a message something like:
  "Failure of Windows updated. Changes in return ".
  It is just returned

  Here are all the logs files (CBS.log, WindowsUpdate.log, WindowsUpdate (1) .log)
  http://bobdn.com/files/logs.zip

  Please tell me how can I get the update installed successfully.

  I finally solved my problem with the update kb2756872 ("update failed, returning of changes"). It was caused by the reserved partition Windows is not set to active (I dual boot using GRUB). Go to the Control Panel-> administrative tools control->-> computer managementdisk management and make sure that the reserved partition is marked 'Active'. This also solves many other problems I experienced as not able to activate Windows startup settings.

• Try to update, but that out of failure configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  my laptop is s200e asus PC with the built in language unique window 8.

  My problem is when I wan upgrade to 8.1 of the shop window, it say I need to update the update of the window.

  but the problem occurs when I updated, and then "failure of Windows updates. Restoration of the changes. Do not turn off your computer. »

  but the return is seem endless, coz I wait for a whole day... .but it will be not just finish.

  I can do nothing but reset it back to the factory.

  I can't update 8.1 store window without updating the window.

  You do not add features to upgrade 8 > 8.1

  That's the Pro and Media Center that do not need another product key and that are no longer available.

  And the creation of media for 8.1 works; I just checked it a minute ago.

  See you soon.

• I'm getting 'Failure Configuring Windows Updates, changes of restoration' by updating windows.

  It was the first time that I am trying to update my laptop of Lenovo G500s which is come with 8 windows pre installed, before installing the updates, I have restored the laptop if you default factory using Lenovo a recovery key. While the updates are being installed I received a message 'Fail configuration Windows updates reverting changes'. It lasted for an hour. When I tried to install updates again the same message appeared. My laptop came pre-installed with Nitro Pdf 8 and Mcafee Internet Security, so I have even uninstalled them, I also ran Mcafee Consumer Product Removal Tool. But the problem with windows update remained. I then ran the convenience store update Windows that sets these two problems:

  fix windows update fixed the database and repair misconfigured update windows components, but this solves nothing. Later I discovered that although the resolution of update problems show that the problems have been solved but convenience store running immediately shows again the same problems.

  So this time I ran again the recovery system, and immediately after the system recovery windows update of convenience store that showed the problems mentioned above two updates of windows.

  Is it so that means the recovery partition itself contains other problems that my problem would have been solved, what do I do to fix this?

  Take a look on: http://support.microsoft.com/kb/947821/en-us

  ... use the Deployment Image Servicing and Management (DISM) Inbox. Then, install the update or Windows service pack again...

• After refreshing the computer, when it is about to finish the update that went FAILURE CONFIGURATION WINDOWS UPDATES

  Hello... I just UPDATE my computer and then when I started to update, when he is about to complete the update this showd upward

  DEFAULT CONFIGURATION WINDOWS updates what to do about it... my OS is windows 8

  Original title: I update my computer

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Error message "failure configuration windows updates, changes in recovery, do not turn off computer.

  I tried to update my laptop with windows updates and an error message "failure windows updates, changes configuration recovery, stop computer" has been there for 20 hours and nothing happens. I can't get rid of this message despite the closure of the laptop for 2 hours and take out the battery. How can I get out of this perpetual loop please?

  I have windows 8.

  [Original title: Windows updates]

  Use any method is needed to access Advanced Startup Options in Windows 8 or 10 including if necessary to the installation media to create for Windows - 8.1 help Windows to start in console repair on the second screen.

  Startup options run the system restore which is the first line of defense and still has a Restore Point before installing the updates.

  If it does not try to repair the startup or as a last resort a refreshment or a Reset.

• Windows 8 failure configuring Windows updates: my sytem keeps refusing to upgrade.

  Whenever I try to load the Windows updates, that it goes through a process at length check and then refuses to load.  It then goes through another process at length:

  Failure of Windows dates

  Restoration of the changes

  Do not turn off your computer

  How fix us this problem?  I would like to upgrade to Windows 8 to 8.1, but the system keeps refusing the upgrade process.  Do I need new drivers Windows installed?  I do a lot of graphic work.  Would be the removal of the player above: AMD driver miniport multi-vendor affects the use of my graphics card?  Just bought the 23 inch want all-in-one model: 23-d203d with intel i7 - 3770 s processor 3.10 GHz with 4 GB 64-Bit system

  Thank you for your help and suggestion.  I used the format of trouble shooter.  He made a few corrections and some updates have been installed in the difficulty but also said there are 2 corrupt files do not set. Do not understand how this can be in a whole new system. Anyway I still can't upgrade windows 8.1 store.  Have any suggestions or should I just leave him alone, as is?

• Failure configuring windows updates

  Windows 7 try to upgrade the computer gets to 75 percent and closes, then restores the original settings and stops. He does every time that the computer starts. I have Norton running and have tried to stop the firewall, I think I did it right. But nothing that I would not change anything.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Configuration Windows Update failure

  When I bought my PC, it is already pre-installed Windows 7 Pro and I do not have the disc with me. Usually, I keep my automatic update. last 2 days I update my IE 7 to 11. Which was the day I turn on my automatic update. Today, when I turn on my PC, I got the message "failure configuration Windows Update... "I waited for hours and it will not be the end. I try to turn it off, then restart. It came again the same screen. Even in safe mode.

  How can I cancel the update? How can I get my windows to start?

  Help, please!

  Hello

  Thanks for posting in the Microsoft Community.

  We appreciate to try few troubleshooting steps.

  I suggest you to refer to the Microsoft Help article and check if it helps to resolve the issue.

  https://support.Microsoft.com/en-us/KB/949358

  I hope this helps. Just reply to us with the State of the question.

  Thank you.

• Failure of windows updates changes to recovery (using Windows 8). Turn a computer off

  I did a refresh with Acer laptop and lost everything. RELOADED Office 2013 and some applications after if and it seemed to work.

  I went to then turn off the laptop and he tried to update about 72 updates. After 30 minutes, the message "preparation set up windows" do not turn off computer. When he tries to restart, the message "failure configuration windows update changes back? rises.

  He continues to do in cycles?

  Help

  JOhn

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  You need to disconnect all your removable media to the computer, such as removable disks (Blu - ray disc, DVD, CD), the memory cards (CompactFlash, Secure Digital card, Memory Stick card), and USB flash drives.
  These removable media can cause this problem during the restart of Windows.

  or

  System restore - Note if your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to the next method.

• Failure to configure Windows Update

  Hi rich,

  Sorry to know the steps of troubleshooting force worked for you.

  Please follow these steps and continue with the next steps to reset the Windows update components.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

   

  Follow the steps below to install the selective Windows Update:

  Follow these steps we will know what update is a problem and we will try to solve the problem on the basis of that.

  1. Go to control panel-> Administrative Tools-> Services and scrolled down to find the "Windows Update" service and stop it.
  2. Then restart again and go back to Windows Update, it will display all the current updates available. You must deselect all updates and select only the first two and install it, must be installed successfully (reboot required).
  3. After the reboot, chose two more and install. Then choose 5 updates and install them. That must be installed successfully (reboot required).
  4. The restart will take a long time. You can see "Configuring Windows updates" for about five minutes. After the restart, select the remaining current updates, including an update of the driver in option. They must install as well successfully (reboot required).

  Hope this helps, get back to us if you need further assistance for Windows.

  Shrinkar,

  I did those batched updates since last week. It works for most, but I've only had a left which is take back me to the "failure to configure...". ». It starts at 30% and after it configures the windows updates, but as soon we get 67% to 100% then "failed to... set back changes...". "appears again.

  BTW, this is the windows update try to configure for ages

  

• Failure of windows updated y580 configuration

  I get the message "failure of windows updates changes to return" when I try to update my computer, can someone please help with this? How can I make sure that updates are going through?

  ' afternoon.

  Please check if KB2647753 is in your list of updates to install. If so, install everything first, everything about him with no other update selected. do a required restart. Once installed successfully, all others must succeed. It is a known Microsoft issue.

  Please let us know if it works for you.

  Kind regards.