Mac for Lego MINDSTORMS toolkits support


Too bad.  I found my own answers.  Thanks anyway.

Tags: NI Products

Similar Questions

  • LabVIEW for LEGO MINDSTORMS and EV3

    LabVIEW for LEGO MINDSTORMS can be used to program the EV3?

    There will be support for the EV3 with LabVIEW to come. Our plan is to be ready in the first half of 2014.

    MINDSTORMS EV3 of LEGO development environment is the only software I know that can be used to program the EV3 brick when it is made available for purchase.

  • MATRIX Toolkit for LabVIEW 2012 for LEGO Mindstorms Installer?

    Hello

    Help, please

    Hi 40123157,

    MATRIX support is included in the competition MINDSTORMS Kit. Here you can find the box tool from last year: http://www.ni.com/download/labview-ftc-toolkit-2012-2013/4331/en/.

    An updated version of this tool for 2014-2015 aims to be released at the end of August.

  • LABVIEW FOR LEGO MINDSTORMS

    Hello, I need help. Pls help me with motors to control Robots NXT with NXT buttons. I need change the power of the engines with NXT buttons. How do I achieve this function?

    Thank you very much for your answer!

    -In the attachment is the same program but in NXT - G

    The preferred method is always directly connect the wire also, you will need to use it. However, if it is in a different loop, you can write to a shared variable and read it from the second loop.

    http://www.NI.com/white-paper/4679/en/

  • 64-bit LEGO Mindstorms NXT pilot

    During the installation of the driver 64 bits for Lego Mindstorms NXT, it stops and I get the following message. "Installation ended prematurely because of an error". Has anyone else had this issue and know a solution.

    Hi Mark Janovetz

    ·         I suggest all the previous version of the drivers associated with the program and then try to install and check if it helps.

    ·         You can even try to install the driver to boot. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Steps to perform the clean boot and check if you have the problem.

    i. Click Start, type msconfig in the search box and press ENTER.

    II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    III. in the general tab, click Selective startup.

    IV. under Selective startup, clear the Load Startup items check box.

    v. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

    VI. click OK.

    VII. When you are prompted, click restart.

    VIII. after starting the computer, try to install and check.

    See link below: http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    i. Click Start, type msconfig.exe in the start search box and press ENTER.

    II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    III. on the general tab, click the Normal startup option and then click OK.

    IV. When you are prompted to restart the computer, click restart.

    Link for more information please refer to: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • labVIEW lego mindstorm

    Hi all

    First, I start only using LabVIEW and I am doing a project to use it to program a data acquisition and a Lego MINDSTORMS at the same time.

    I had downloaded LabVIEW 2010 and then fell on a LabVIEW for lego mindstorms. When you download the LabVIEW for Lego Mindstorms, I lost the 2010 edition of LabVIEW. It is very easy to use the mindstorm addition to program the nxt but in my project, I also use a NOR-DAQ and need the Add on DaqAssist also. Would I be better to return to the 2010 edition and try to find an add-on for mindstorms or is it possible to get an add-on daqAssist for labVIEW, lego mindstorms.

    Thank you

    When I do try and add a component, for example the motor1 that a screen that's going through files saying loading and the search if it does not find a file of what he asks me locate an if i cant find and press Cancel! one continues on his search through files. It will appear the end component on the block diagram but the custom of executed program

    HELP > :-(

  • Photosmart Printer 6520: Is the driver for Photosmart 6520 still supported by Mac OS Sierra, until I update?

    Is the driver for Photosmart 6520 still supported by Mac OS Sierra, until I update?

    Hello @JeffVirant - greetings!

    Thank you for visiting the Forums from the HP Support! It is a wonderful location to converse with the community, get help and advice.

    Printer HP Photosmart 6520 is compatible with MAC OS Sierra. Please go ahead with the upgrade

    You can download the MAC Sierra drivers for your printer from here: http://hp.care/2feP2V6

    Please let me know if that solves the problem, or if you need assistance.

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

    I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

    Make sure you have cookies enabled for your browser.  Try using a different browser if the problem persists.

  • Bluetooth connection with the Lego Mindstorms NXT robot

    Hello
    I got a license for Bluetooth Stack for Windows by Toshiba.
    I try to connect to the Lego Mindstorms NXT robot: http://mindstorms.lego.com/en-us/default.aspx
    But it does not work.
    The connection seems to be good and NXT and PC to find them, but when I try to connect, the NXT said "the line is busy".
    Is someone can tell me if he can get through this issue?
    Toshiba and Lego have an agreement on the connection of the questions?
    Thank you.

    Hello

    Do you have Toshiba notebook or just use the Toshiba BT stack?

    How to pass through this issue? Should anyone of us spent 250 Euros to buy it and test it at home? Dear oracid it's user forum and you can get help from someone who has the same home equipment and can help you with his experience.

    Agreement between Toshiba and Lego in my opinion it is not problem. Any manufacturer who build material and want to use BT must know how it works. On the market of equipment, there are specific characteristics for each communication technology and what do we do Toshiba is to build and offer the specified material.

    In your case, you must contact the Lego support and ask for help. they, no doubt, tested own stuff with different hardware platforms, the operating systems and software BT so Lego should have enough experience with own products.

  • File sharing Mac for iphone via Airdrop does not

    File sharing Mac for iphone via Airdrop does not. Please suggest me.
    In the finder of mac and iPhone, I clicked on "Let me o find out for everybody". IPhone is still not release shows.
    IPhone is the model of 5 s (10 iOS) and mac MAc mini end of 2014 (OS X EL Capitan - 10.11.4).)

    Cross the writeup here.  Make sure that both devices have Wi - Fi and Bluetooth connection 'On '.

    Use AirDrop to send the contents of your Mac - Apple Support

  • I installed the captain and my mac has been freezing on step "Configure your mac" for 24 hours. How do I please you?

    I installed the captain and my mac has been freezing on step "Configure your mac" for 24 hours. How do I please you? It is just to show the "set up your mac" and the turning circle Rainbow

    Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

    https://support.Apple.com/en-us/HT201295

  • Lego Mindstorms silent installation

    Hello!

    I want silent install edition teacher of Lego Mindstorms Education EV3. But I can't make it work.

    I use the command line: setup.exe having/q /acceptlicenses Yes/r: n

    I used this credit:

    ; --------------------------  How to use this file  ---------------------------------
    ;
    ; To run this installer in silent mode:
    ; 1 change the information below to match your company's information and the installation location.
    ; 2 run: setup.exe /q /AcceptLicenses Yes. Passing the value 'yes '.
    ;    the /AcceptLicenses parameter indicates that you accept the license agreements.
    ;    Alternatively, instead of / q, / QB can be used to run the installer in basic UI mode.
    ; 3. the installation program will automatically restart your system after the installation is complete.
    ;    To prevent the restart using the command line: setup.exe /r: n/q /AcceptLicenses Yes
    ;
    ; For more information on the automation of the installation visit www.ni.com/info and enter the code exdir3 info.

    ; --------------------------  Set feature states  ---------------------------------
    ;    Valid service States are: local, Absent, NoChange, default
    ;    Local - install (on the local hard drive). If already installed leave that he installed.
    ;    Absent - do not install it. If already installed uninstall it.
    ;    NoChange - do not install it. If already installed, leave it installed.
    ;    Default value is equivalent to not register the function in this file. The feature follows its default behavior.
    ;    To install EV3 in student mode, delete the "EV3_EDU_Mode" parameter on line 24 by removing the entire line.

    [Features]
    LEGO_EV3_EDU_Feature.ev3.edu.100 =
    EV3_EDU_Mode.ev3.edu.mode.100 =

    ; -All install directories-
    ; To use the default paths, remove the following section *.

    [Directories]
    LEGO_EV3_EDU_Feature.ev3.edu.100 =

    ; -Set the parameters of the General installation-
    [InstallationType]
    ; uncomment one of the following lines for student vs. teacher install
    DefaultRadioButton = TeacherInstall
    DefaultRadioButton = StudentInstall

    If I add = Local to the syntaxes features, that it returns an error when you attempt to install, saying that it is an incorrect syntax.

    When I install silent with equity, Lego Mindstorm installs students edition.

    If I try to create a new credit memo with /generatespecfile setup.exe, the installation process hangs.

    So what I am doing wrong?

    Apparently this depends on the version you are trying to install, you must therefore take account of this version in the features section.  For example, I was trying to install version 1.2.1 today and it did not work until I did the following:

    LEGO_EV3_EDU_Feature.ev3.edu.100 = local
    EV3_EDU_Mode.ev3.edu.mode.100 = local

    changed to

    LEGO_EV3_EDU_Feature.ev3.edu.121 = local
    EV3_EDU_Mode.ev3.edu.mode.121 = local

    And the installation in silent mode now works correctly.

  • I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.

    I tried to install cs3 on windows 10 shadow run on my mac book pro.  Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit.  Any thoughts?

    First of all, that the software is old enough so that it does not at all with Windows 10... but

    An idea that MAY work to install or run some programs in Windows old 10

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    First, that the software is old enough for that it may ALSO not work with Windows 7... but

    For Windows 7 you right click on the program and select a compatibility option in the pop-up window

  • How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?

    How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?

    You can download it from this link and post with your serial number. You can run LR5 on both machines.

    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5856

  • After you download the Mavericks on Mac for CS4

    Problem (error 150:30) after downloading the Mavericks on Mac for CS4. Any help?

    Unable to open programs more...

    No important problem experienced with the Mavericks and CS4 under Adobe.

    http://helpx.Adobe.com/x-productkb/global/Mac-OS-Mavericks-compatability.html

    150:30 error is a problem with the license.

    Try http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

    If all else fails and you're totally stuck, as a last resort, try help > deactivate. Then, uninstall CS4, run the cleanup tool.

    http://www.Adobe.com/support/contact/cscleanertool.html

    Then reinstall CS4.

Maybe you are looking for