64-bit LEGO Mindstorms NXT pilot

Similar Questions

• Bluetooth connection with the Lego Mindstorms NXT robot

  Hello
  I got a license for Bluetooth Stack for Windows by Toshiba.
  I try to connect to the Lego Mindstorms NXT robot: http://mindstorms.lego.com/en-us/default.aspx
  But it does not work.
  The connection seems to be good and NXT and PC to find them, but when I try to connect, the NXT said "the line is busy".
  Is someone can tell me if he can get through this issue?
  Toshiba and Lego have an agreement on the connection of the questions?
  Thank you.

  Hello

  Do you have Toshiba notebook or just use the Toshiba BT stack?

  How to pass through this issue? Should anyone of us spent 250 Euros to buy it and test it at home? Dear oracid it's user forum and you can get help from someone who has the same home equipment and can help you with his experience.

  Agreement between Toshiba and Lego in my opinion it is not problem. Any manufacturer who build material and want to use BT must know how it works. On the market of equipment, there are specific characteristics for each communication technology and what do we do Toshiba is to build and offer the specified material.

  In your case, you must contact the Lego support and ask for help. they, no doubt, tested own stuff with different hardware platforms, the operating systems and software BT so Lego should have enough experience with own products.

• LEGO Mindstorms 2.0 crashes at startup when LabView Signal Express is installed first

  When NI Circuit Design Suite education edition is first installed in a computer and the LEGO Mindstorms software second, the LEGO Mindstorms software does not work, he reported the following:

  Error: A required file is broken

  Possible solutions: reinstall the driver of LEGO Mindstorms NXT (tried but does not work)

  Error code: 1003

  Ordinal not found

  The 18 ordinal not found in the library of dynamic links NIVISV32.dll

  Error loading "fantom.dll".

  The operating system cannot run %1

  On other computers the LEGO software starts, it displays the part of the initial screen and then a small window will open saying that the Mindstorms software has made an error and that it will close. The previous report does not display.

  If LabView Signal Express is uninstalled and reinstalled the software, LEGO, the LEGO software works.

  I downloaded and installed the new and old of the NIVISV32.dll versions and is not correct the problem. I went as far as version 4.20 of the dll because it is dated in 2007 and dll files installed by the LEGO software when it works is also dated 2007, but if I install the dll without uninstalling LabView Signal Express, the continuous LEGO software does not.

  Please advice how to fix this without having to uninstall first LabView Signal Express. If the LEGO software is installed first, LabView Signal Express will use and no not to replace the old version of the dll 2007 installed by the LEGO software? Y at - it an update of the LEGO software that corrects this problem?

  I repeat: I know a solution is to uninstall LabView Signal Express, install LEGO Mindstorms and then reinstall LabView Signal Express but I have 60 computers already cloned and deployed with this problem, so I don't want to go to this long process to solve the problem. Computers use Windows 7 and the problems occur on both 32 and 64-bit versions of Windows 7.

  Any ideas?

  
  

• labVIEW lego mindstorm

  Hi all

  First, I start only using LabVIEW and I am doing a project to use it to program a data acquisition and a Lego MINDSTORMS at the same time.

  I had downloaded LabVIEW 2010 and then fell on a LabVIEW for lego mindstorms. When you download the LabVIEW for Lego Mindstorms, I lost the 2010 edition of LabVIEW. It is very easy to use the mindstorm addition to program the nxt but in my project, I also use a NOR-DAQ and need the Add on DaqAssist also. Would I be better to return to the 2010 edition and try to find an add-on for mindstorms or is it possible to get an add-on daqAssist for labVIEW, lego mindstorms.

  Thank you

  When I do try and add a component, for example the motor1 that a screen that's going through files saying loading and the search if it does not find a file of what he asks me locate an if i cant find and press Cancel! one continues on his search through files. It will appear the end component on the block diagram but the custom of executed program

  HELP > :-(

• Lego Mindstorms silent installation

  Hello!

  I want silent install edition teacher of Lego Mindstorms Education EV3. But I can't make it work.

  I use the command line: setup.exe having/q /acceptlicenses Yes/r: n

  I used this credit:

  ; --------------------------  How to use this file  ---------------------------------
  ;
  ; To run this installer in silent mode:
  ; 1 change the information below to match your company's information and the installation location.
  ; 2 run: setup.exe /q /AcceptLicenses Yes. Passing the value 'yes '.
  ;    the /AcceptLicenses parameter indicates that you accept the license agreements.
  ;    Alternatively, instead of / q, / QB can be used to run the installer in basic UI mode.
  ; 3. the installation program will automatically restart your system after the installation is complete.
  ;    To prevent the restart using the command line: setup.exe /r: n/q /AcceptLicenses Yes
  ;
  ; For more information on the automation of the installation visit www.ni.com/info and enter the code exdir3 info.

  ; --------------------------  Set feature states  ---------------------------------
  ;    Valid service States are: local, Absent, NoChange, default
  ;    Local - install (on the local hard drive). If already installed leave that he installed.
  ;    Absent - do not install it. If already installed uninstall it.
  ;    NoChange - do not install it. If already installed, leave it installed.
  ;    Default value is equivalent to not register the function in this file. The feature follows its default behavior.
  ;    To install EV3 in student mode, delete the "EV3_EDU_Mode" parameter on line 24 by removing the entire line.

  [Features]
  LEGO_EV3_EDU_Feature.ev3.edu.100 =
  EV3_EDU_Mode.ev3.edu.mode.100 =

  ; -All install directories-
  ; To use the default paths, remove the following section *.

  [Directories]
  LEGO_EV3_EDU_Feature.ev3.edu.100 =

  ; -Set the parameters of the General installation-
  [InstallationType]
  ; uncomment one of the following lines for student vs. teacher install
  DefaultRadioButton = TeacherInstall
  DefaultRadioButton = StudentInstall

  If I add = Local to the syntaxes features, that it returns an error when you attempt to install, saying that it is an incorrect syntax.

  When I install silent with equity, Lego Mindstorm installs students edition.

  If I try to create a new credit memo with /generatespecfile setup.exe, the installation process hangs.

  So what I am doing wrong?

  Apparently this depends on the version you are trying to install, you must therefore take account of this version in the features section.  For example, I was trying to install version 1.2.1 today and it did not work until I did the following:

  LEGO_EV3_EDU_Feature.ev3.edu.100 = local
  EV3_EDU_Mode.ev3.edu.mode.100 = local

  changed to

  LEGO_EV3_EDU_Feature.ev3.edu.121 = local
  EV3_EDU_Mode.ev3.edu.mode.121 = local

  And the installation in silent mode now works correctly.

• LabVIEW for LEGO MINDSTORMS and EV3

  LabVIEW for LEGO MINDSTORMS can be used to program the EV3?

  There will be support for the EV3 with LabVIEW to come. Our plan is to be ready in the first half of 2014.

  MINDSTORMS EV3 of LEGO development environment is the only software I know that can be used to program the EV3 brick when it is made available for purchase.

• What versions of software Labview should I install for mindstorm NXT

  I would like to know what version of Labview evaluation software, do I need to install in order to communicate and to control the embedded Mindstorms NXT controller and its outputs (engine, sounds) and inputs (sensors). I used the nxtg software, but want to learn and activate the Labview associate for learning and teaching. Should I install all components of this version or just a little?

  I ask this question because I want to save space in my PC.

  No matter what version of LabVIEW is fine, but you want the NXT module which is free. Download LabVIEW. Simply search our site for 'module NXT' to get the latest version that corresponds to your LabVIEW.

• Windows Vista home premium 2.0 Mindstorms NXT and bluetooth

  Hi all

  Has the hp pavilion 9417cl built in bluetooth adapter? Who will pair with the mindstorms NXT 2.0 so I won't buy a dongle (I am running windows Vista Home premium) if so, does anyone know what steps I should take to combine together?

  Thanks for your help,

  David

  [email protected]

  Hey dc2012,

  Unfortunately it has not built in the Bluetooth adapter.

  Here are the specs of the laptop. http://goo.GL/77Lsb

  Look under the sections that says wireless connectivity which is mention only 802. 11b / g WLAN.

  THX

• Someone knows how to fix a corrupted file mib.cab? 2350 error code? The result of the installation failed for Mindstorms NXT 2.0 on computer vista laptop, service pack 2.

  Tried to install the Lego NXT 2.0 software (programming robotics), a message "file 'mib.cab' required for this installation is corrupt and cannot be used.  A message gives the error code 2350.  Someone knows how to fix a corrupted file mib.cab?

  Try in the Forum of programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• MATRIX Toolkit for LabVIEW 2012 for LEGO Mindstorms Installer?

  Hello

  

  Help, please

  Hi 40123157,

  MATRIX support is included in the competition MINDSTORMS Kit. Here you can find the box tool from last year: http://www.ni.com/download/labview-ftc-toolkit-2012-2013/4331/en/.

  An updated version of this tool for 2014-2015 aims to be released at the end of August.

• LABVIEW FOR LEGO MINDSTORMS

  Hello, I need help. Pls help me with motors to control Robots NXT with NXT buttons. I need change the power of the engines with NXT buttons. How do I achieve this function?

  Thank you very much for your answer!

  -In the attachment is the same program but in NXT - G

  The preferred method is always directly connect the wire also, you will need to use it. However, if it is in a different loop, you can write to a shared variable and read it from the second loop.

  http://www.NI.com/white-paper/4679/en/

• Mac for Lego MINDSTORMS toolkits support

  
  

  Too bad.  I found my own answers.  Thanks anyway.

• Studio XPS 1645 and 64-bit Windows 8 - missing pilots 'Base system device '.

  I just bought a XPS1645 without disc and have successfully installed Win8.1. All right, outside of...

  1. Device Manager shows two Base who are "trained" - system devices could someone suggest what items can be and what drivers are needed?

  2. the volume and the DVD eject buttons don't. (The wireless button certainly.) Suggestions?

  Thank you very much.

  VEN_1180 is Ricoh and Ricoh in this system is the card reader. The driver that I mentioned:

  http://ftp.Dell.com/Chipset/R234107.exe

  should these base system device drivers. If the installation does not remove these then manually update the driver for the two devices by pointing to C:\Dell\Drivers see here for more details:

  http://philipyip.WordPress.com/unofficial-driver-sets/checking-hardware-IDs-in-the-device-manager/driver-installation-via-the-Device-Manager/

  Bluetooth that I believe was optional, so you won't have a bluetooth card. If you are sure that you have one, try typing Fn and F2 a few times to see if you can enable/disable Bluetooth radio and outside, you can leave the Device Manager maximized when doing this to see if there is no change. It needs display in Device Manager before installing the drivers.

  If this fails, you may need to go to the BIOS Setup and disable it, then load Windows and turn off then repeat the process, but allowing it. To enter the BIOS F2 Setup press immediately when you feed the machine.

  The Bluetooth card is the Dell Wireless 370 and a Broadcom device. Of Broadcom Bluetooth update should install the appropriate drivers for it.

• LabVIEW Terminal connects not to the EV3 EV3 software retail will be (but pilot LEGO will not uninstall)

  Windows connects successfully to the LEGO EV3 via USB or Bluetooth.

  However, the Terminal LEGO of LabVIEW 2015 do not recognize.

  I installed the software at retail EV3 for check and it * is * connect to the EV3.

  I'm trying to fix the "LEGO Mindstorms NXT x 64" driver, but it will not uninstall even if I uninstall everything of LabVIEW, including the module (input administrator rights when prompted.)

  I've been struggling with this days, and I need to connect my EV3 to teach my students LabVIEW.

  Any help is greatly appreciated! Thank you in advance.

  -Associate Professor Matthew,

  #Date: Thu, January 21, 2016 17:21:58
  #OSName: Windows 7 Enterprise Service Pack 1
  #OSVers: 6.1
  #OSBuild: 7601
  #AppName: LabVIEW
  #Version: 15.0 32 bits
  #AppKind: FDS

  
  21/01/2016 5:27:54.774 PM
  Coolish 0x00BA6193:
  c:\nimble\penguin\labview\components\mgcore\trunk\15.0\source\ThEvent.cpp(267): coolish 0x00BA6193:
  Minidump ID: 789e6f18-0e9e-4b10-8b46-c0dd7448d8d4
  $Id: //labview/components/mgcore/trunk/15.0/source/ThEvent.cpp#1 $

  We found it!

  Our IT Department has been able to dig up in the driver package and finally managed to uninstall.

  Something has been damaged and the pilot wouldn't uninstall correctly.

  This fixed the problem beautifully.

  -Matthew

• How to send a nxt program labview in the mindstorm block

  Hello

  I would like to know how to send a writing of nxt program on labview in the mindstorm block for not using usb and bluetooth connection

  In order to start a program directly with the block

  Thanks for your your answer attentionand

  Hello

  National Instruments does not directly support the LEGO Mindstorms Nxt please refer to this KB see were you can ask for help.