Mac Mini does not not at the power switch

Similar Questions

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• Mac Mini does not recognize external hard drive

  Hello!

  I have a weird question on my Mac Mini. I have two Seagate to 8 external drives connected via USB to my Mac Mini (mid-2011 with Maverics). The discs worked well, but suddenly one of them will not be recognized by the Mac Mini.

  I connected the hard drive of my MacBook Pro and an old PC and it works fine and all files are available, but for some reason, my Mac Mini will have nothing to do with her anymore.

  It does not appear in the finder or disk utility. I unplugged the hard drive for hours and then tried to plug it back without a bit of luck. I restarted the Mac Mini on several occasions. I also tried to connect it to all the USB ports on the Mac Mini. When I connect it to the USB ports, there is no whisper sound indicating that it has started working. However, no sign of it on the Mac Mini.

  It's like the Mac Mini has decided to ignore the external hard drive, no matter what I do. Seeing this works on other devices, I'm fairly certain that the problem lies in the Mac Mini.

  I'm no expert, so any help will be very valuable for me. And if you are kind to help, please explain it to me like I'm 8 or 93 years old.

  Thank you.

  Are these drives powered independently or they depend on USB power?

• Mac Mini does not play videos

  Hello

  I ve a problem with my Mac Mini mid-2011 and El Capitan.

  I can play videos on Youtube, you can watch the video in preview and so on. After a short while no video starts to play, only with VLC I see videos.

  I have to restart my Mac and I can play videos for a short period, I habe to restart again.

  Any help would be great.

  • Note the time of the next stop. Then, open the Console application in the Finder > Applications > utilities and look for entries of the log at the time of the stopage. Suspicious message here.

• Mac Pro does not recognize the Ethernet ports

  After a reboot for my end of 2013 Mac Pro OS x 10.11.3, the two Ethernet ports are most recognized. Suffice to say not 'connected' is one of them.

  I have:

  • rebooted a couple of times
  • Reset the PRAM
  • the power disconnected for several minutes left
  • tried two different terminals
  • tried two different Ethernet cables
  • tried the two Ethernet ports

  The light of the end device will blink.

  WiFi works fine.

  What should I do before I decide that there is a hardware problem?

  Bob

  There was a recent post about the same problem and found a solution. Give it a try: Re-built-in ethernet disappeared.

• Tecra M2 does not start - the power light AC blinking orange

  Someone at - it a list of codes for the Tecra M2 flash.
  My friend has a laptop that does not start at the top. the AC power LED flashes orange. a long, short, long, short, long, short, long, short.

  I checked the battery and reinstall the RAM.
  Any IDE?

  Hello

  I agree with go.
  The ASP would be able to tell what means error.

  Usually means short and 1 long: 0
  So the error must be: 1010 1010
  Due to the last significant bit (LSB), to be read by behind:
  So it now means: * 0101 0101 binary *-> it must be converted to hexadecimal-> * 55 Hex *.

  Then, you will get a hex code.
  But unfortunately, I m not very well which could mean this code

  So ask ASP for help!

• After the 10.11.2, update Mac Mail does not show the number of unread emails badge.

  What can I do?

  A

  In the menu bar, you select

   ▹ System Preferences... ▹ Notifications application icon ▹ Mail ▹ Badge: on

  If the badge is still not displayed or displays the wrong count, see below.

  B

  Please stop Mail. Force quit if necessary.

  Back up all data before proceeding.

  If you use OS X 10.11 ("El Capitan") or version later, triple - click anywhere in the line below on this page to select:

  ~/Library/Mail/V3/MailData

  If you use an older version of Mac OS X, use this line:

  ~/Library/Mail/V2/MailData

  Copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to folder

  in the menu bar. Paste in the box that opens by pressing Command + V, then press return.

  A file window opens. In it he must be files with names as follows:

  Index of the envelope

  ExternalUpdates.storedata

  Move these files to the desktop, leaving the window open. Other files in the folder can have names more long that begin as above. Move these files, if any, in the trash.

  Mail recovery. It should invite you to re - import your messages. You can get a warning that the index is corrupted and that Mail must quit smoking. Click OK. Generally speaking, the process takes a few minutes, but this can take hours if you have gigantic mailboxes. In this case, you will be able to speed things up temporarily by adding your file to the list of personal information protection in the Spotlight preferences pane. Remove it when Mail has finished importing.

  If the import operation stalls or fails with an error message, quit Mail, delete the two new index files (maintenance of the original that you moved to the desktop) and try again. According to several reports, the second attempt can succeed if one does not.

  Test. If Mail now works as expected, you can delete the files that you moved to the desktop. If not, post your results.

• Mic Mac mini does not-maybe a setting I think not?

  I have a mini that refuses to accept a micro.   I take the microphone and put it in a computer portable air and everything is fine.  but when I use it with the mac mini, it will not work.   I selected LINE IN port and default audio in and out.  can not get.   I'm an experienced user.  There must be something that I think not.

  Thank you

  What is a USB microphone? Audio input on a MacMini is level line, not the microphone level.

• Dv6370ea Pavilion: Pavilion DV6370 load lights ok, but not does not transfer the power of laptop

  Hello guys, I have a question:

  no reason, my laptop appears dead, light up when I plug the power cord of the circle of light in the hole for the power cord, but no power no led on laptop, and when I press the button / stop does nothing.

  I did NOTHING to the laptop, just from one day to the other make me this problems.

  Can you help me? IM disperated!

  Sorry for my bad English too.

  The video chip can be "reballed" which means that all connections on the motherboard are restored with the heat to melt the solder. Which is the setting of your motherboard, not replace. No other that these options has nothing that will revive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 18 XPS does not start, the power light will not stop flashing

  I was upgrade this computer to Windows 10, I did install one instead, but the children had spyware which even then showing upwards. I did a refresh, there no I did an installation and finally got in windows. Some updates installed and restarted.

  The computer was bricked since. The only thing that happens is the LED which indicates the power above, the button will not stop flashing white light. Connected or not connected, after having held down the power button for 5, 10 and 30 seconds, the led stops flashing for a while and then again. I tried several points of sale. No idea if it is a coincidental breakdown.

  I'll change that.  I went back in and re-removed the cable from the battery.  I also removed the CMOS battery cable this time... I was at least an error message on the screen and access to the BIOS!

• CC Adobe on my new Mac Pro does not complete the installation after running the Migration Wizard

  Hey guys, just bought a mac pro, and assistant of migration used to transfer my programs, now adobe cc stops half way through installation and said: cc adobe, requires to solve this problem, is damaged or missing, download and install adobe cc on "http..., tried to download it again, did not work, anyone who knows what to do?"

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• WRT610N - MAC filtering does not list the names of machine

  I replaced a DLink 624 with a Linksys WRT610N and am surprised to see that it doesn't seem to be a way to write the name of the machine with the MAC that I had with the Dlink router.

  Please tell me there is a way to do it.  There is no way I can follow machines.  If I want to delete a machine, and I don't have access to it to check the MAC address, how do I remove the right machine?

  With a little luck I suffer just a brain lock and there is a simple way to do this, but I can't.

  See you soon,.

  Rob

  There is no such feature to enter the name of the Mac filtering on the router linksys devices.

• Premiere Pro does not use the power of the nucleus for the rendering of chronology

  I had PremierePro CS5.5 and i7 920 and nvidia GTX 295. When I edit my images (cineform) everything is fine because I use CUDA boost, but when I try to restore the timeline I have seen on my CPU and GPU that rendered monitor uses maybe about 10% of the power of all hearts (8 cores). How to use the full power of the carrots when I went to my calendar?

  Project > project settings > general

  

• Problems WAG160Nv2 (find firmware, adres mac protection does not accept the multicast address)

  Hello

  I can't find a page of support for my router (WAG160Nv2), and therefore, no way to get the latest firmware.

  I couldn't save the product because he wasn't the availeble product list and there seems to be no way to communicate with any type of technical support.  So I hope someone can help out me.

  Update the firmware of wel is probably nog is going to help me with my problem.

  I currently use mac addresses to secure my wireless network.

  Now, I bought a smartphone with WiFi but when I add its address to the list and try to save the day I get the error that the address cannot be a multicast address.  If anything I can do for my wlan accept my phone?

  Wireless MAC address filtering is not a good way to protect your wireless network.

  You can enable security wireless WPA/WPA2 on your network. Change the SSID. Disable wireless MAC filtering.

  Try to connect to the new wireless network and see if it works.

  Follow this link to download the firmware for WAG160N. Make sure you have the correct model number and version number of your router.