Tecra M2 does not start - the power light AC blinking orange

Similar Questions

• Tecra M2 - will not start, the power light is on

  Hi, I wonder if someone out there could help me with a problem?

  I was using my M2 Friday when my friend accidentally hit a very small amount of beverage on the front of my M2, I immediately got up and got a hair dryer on it.

  After leaving it an hour I tried to use and everything worked as before which was a great relief, but a day later, I used the M2 to check my e-mail address when all of a sudden went.

  The power led is on was still and so was the light that indicates I have a CD player, I tried several times and it wouldn't start, so I went again for a day and yesteday morning it seemed that it was starting up only to freeze on the Windows screen, he then returned and he has not started since.

  Could you please give me some advice on what I could do to fix this?

  Kind regards

  Russ

  Hello Russ

  Be realistic. What you can do in this situation? Not much! You can try to start the machine. See if you can get into the BIOS and if yes how long the device will remain on. If unit is running for an extended period, you can try to boot from the CD (for example with the recovery media).

  You can try to connect as another external HARD drive to another laptop and try to back up all your important data and reinstall the OS. More than that is not possible. If there is an electronic failure, it is not easy to fix on your own and support technical investigation just to see what hardware is damaged.

• 18 XPS does not start, the power light will not stop flashing

  I was upgrade this computer to Windows 10, I did install one instead, but the children had spyware which even then showing upwards. I did a refresh, there no I did an installation and finally got in windows. Some updates installed and restarted.

  The computer was bricked since. The only thing that happens is the LED which indicates the power above, the button will not stop flashing white light. Connected or not connected, after having held down the power button for 5, 10 and 30 seconds, the led stops flashing for a while and then again. I tried several points of sale. No idea if it is a coincidental breakdown.

  I'll change that.  I went back in and re-removed the cable from the battery.  I also removed the CMOS battery cable this time... I was at least an error message on the screen and access to the BIOS!

• Dell Studio 540MT does not start, green power light on, but the Start button / clear stop completely

  Looking for assistance

  Have a Dell Studio 540MT (purchased in 2009), worked great until 2 weeks ago.   After a temporary system failure would not start.    The power light itself is green fixed.   The power button on the front panel is completely released.

  I read a lot of messages and other information about a similar problem.   Therefore, I did following:

  1. unplug everything, press the power button / stop for 1 minute and retries.   without success

  2. replace the CMOS battery.  without success

  3A jumps the Green and black 20 supply connection wire pins to motherboard.  It started immediately food, fans and hard drive.   so I assumed that the PSU has been authorized.

  4 replace the motherboard with a new mobo.  Curiously, in a first time, there was no change, but after about 2 minutes, the power button was working and power system.   Everything worked so very well.   I had also completely cleaned all the dust in the chassis and radiator, fan and had applied the thermal paster as directed by Artic Silver.   I even turned off after hours of race and restarted system.  Restarted, he noted that it took a couple times by pressing the power button to make it work.   Then the 2nd day I shut down the system by a normal shutdown through Win 7 and let rest for about 10 hours.   When tried to start/turning the power on again, same problem as the original problem... at first, before light power button would show amber flashing when first pressed the power button / stop, then once I unplugged the power cord and let it sit for 1 hour, the light power button showed no light, completely and again no restarts.

  5. I ordered a new power button cord (new)... This could be the problem and replacement will fix?   Is this a known problem that power button can cause this kind of problem?

  6 or is a problem of power supply?   But you wonder why the green light of the PSU and works very well when jumping the Green and black wire on the connector 20 pin?     Before I go buy a new power supply to other suggestions?

  Is there a known issue with button / stop itself and/or PSU on Dell Studio 540 MTs?

  Yes, the front panel can cause failure to start in some models, although I don't specifically remember if the 540 has been affected by this problem. Please let me know if the replacement resolves the problem.

  ATX power supplies should work. Here are the standard components of the Dell desktop computers.

• HP 8710W (p/n: GT648PA #ABG): 8710W does not start - the battery light flashes orange 7 times then 1 green.

  Troubleshooting done so far: I removed (even the RTC) battery, hard drive and memory. Hold the power button for 30 sec.

  When I re - install the battery and press the power button, it flashes 7 times orange, and then Green 1. Same thing happens with or without the power supply is connected.

  The laptop does well (no fan, no disc doesn't sound etc.) and the screen stays off (i.e. no splash screen).

  I thought it was a dead battery, as it was 8 + years, so bought a new replacement. Unfortunately, there no fixed and I still have the same problems with the new battery.

  How to decode what mean hot flashes?

  What else can we test it before I bin the laptop? I would have preferred not to do so as he has been a full rock performer and the 17 "display is fantastic as a desktop replacement.

  Any suggestion is appreciated.

  Thank you.

  Unfortunately, this seems to be a motherboard problem. After eight years of service, it is left for a digital camera never never land.

  Unfortunately, it's time to bin and source of a replacement book.

  You can retrieve data from the hard drive using a cable or a drive enclosure hard usb 2.5 ".

  I understand your disappointment. Workstations are portable very special and very expensive to replace.

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• I updated windows 10-level, he wiped my photoshop. downloaded 11 elements, it does not start the installation

  Hello

  I need help! I use photoshop a lot. I started at level 10 windows and it wiped my photoshop. I downloaded again, it does not start the installation. I tried redownloadeding and it says it can not extract it because all the parts aren't there. Would love to be happy again with photoshop.

  Hi Mark,

  You can download Photoshop elements by using the following link: Download Photoshop Elements | 14, 13, 12, 11, 10

  Be sure to download the two files available for download.

  Kind regards
  Rahul

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• When the Active Server is shut down normally, the passive server does not start the service

  Hi friends,

  I have a question for the vCenter heartbeat,

  When the Active Server is shut down normally, the passive server does not start the service.

  Is this normal?

  Thank you.

  He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".

  Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)

  Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat

  See you soon!

• CS6 does not start, the trial version will open instead of the real version

  After reinstalling my system of time machine cs6 does not start, the trial opens instead. Serial number is not accepted. What should do?

  Hi MFGTG,

  I checked the serial number and found that there is a problem with the serial number.

  I advise you to please call our 800-443-8158 support or start the conversation by clicking the below link

  http://helpx.Adobe.com/contact.html

  Thank you

  Kapil

• Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Have you tried; Type of topic: profiles in the address bar.