Mac OS Sierra, El capitan is it really better?

Similar Questions

• Slow MacBook after updating to mac os sierra

  Mac book is very slow after updating to mac os sierra. I try to open an app and its very slow, or finder

  How can I fix it?

  I already rebooted it but no luck

  I have a mac book pro end 2011 version 10.12

  Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this please. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac.

  Then, shut down your Mac and restart in 'Safe Mode '. To learn how to do it please read: try safe mode if your Mac does not start-up. Compare works your Mac in Mode for how safe it was.

  Then restart normally. If the same problem comes back, please read the section If a problem does not occur in safe mode for actions recommended to Apple.

  Finally, you can temporarily create a new user account and log into this account to determine if the problem also exists when connected to this account. To learn how to do read how test a question in another account on your Mac - Apple Support. When you are finished troubleshooting, you can remove the temporary user account by following these instructions: OS X El Capitan: remove a user. Before you delete, confirm that you have not need of all the files that you have possibly set in this account.

  Let me know what you decide.

• Motion 5 crashing when adding text - Mac OS Sierra

  I just upgraded to Mac OS Sierra and started a new project to Motion 5.  Everything seems to work fine except when I try and add text.  I start typing Motion 5 breaks down.

  There an idea on how to solve this problem, assuming that I won't go back to El Capitan?

  Thank you.

  NEVER update apps video pro or OS X versions in the middle of a project.

  NEVER update the versions of OS X until all your vital applications and plugins have been updated to be compatible.

  FCPX, Motion, Compressor all have minor with Sierra problems until their Sierra updates are released.  Many third-party plugins is not yet compatible Sierra.

  Difficulty?  Yes, wait for the update of Sierra for applications video pro.  That's all you can do.  Or roll back to El Capitan.

• In Mac Os Sierra why is he suddenly slow opening of folders of bookmarks in the sidebar of Safari?

  Since the installation of Mac Os Sierra I'm suddenly affected by a very slow opening and closing bookmark next to Safari bar files when I click on them.  Regularly, it takes 3 seconds for a file to open or close to display the list of bookmarks in a file.  Does anyone else know this?  Trying to solve the problem, I have repaired the Mac HD, emptied all my caches in the library in the Finder, reset the PRAM and am now ideas.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in the Preferenes system, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• How to upgrade the entire network of Mac OS Sierra?

  Don't know where to post this question, I hope this is the right place.

  We have 12 Mac at the office that I want to update to Mac OS Sierra.  We have an El Capitan OS X Server and Apple Remote Desktop.

  What is the most effective way to upgrade all of our computers?

  If you do not want to distribute if DRC and if its computers only a dozen of this process applies to El Cap but should work for Sierra

  Create an installer for OS X - Apple support bootable

• ENVY 100 series D410: Envy 100 D410 series will not scan with Mac OS Sierra 10.12

  Hello, I just bought a new Mac, and I have the Mac OS Sierra 10.12

  The printer works fine but I can't scan.

  I do not have the scanner HP 3 that previously had on my other computer and I don't have the installation CD.

  I can't find the software online. He said that HP still has the software to make it work, but I can't.

  I tried the HP Easy Scan but I need the previous software that I don't.

  What can I do?

  Thank you

  Sabrina

  @Sab7

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand the scan does not work on the BONE of the Sierra.

  Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

  • Image capture
  • Overview
  • Printers and Fax preferences in system preferences
  • Scanner / printer queue

  The basics of the Mac: using a scanner

  I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

  For links related, please here.

  To troubleshoot the macOS Sierra problems: click here

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Configuration error 1 after upgrading to Mac OS Sierra (Illustrator)

  Hello world

  After that I have upgraded to Mac OS Sierra, some of my Adobe software started crashing. Adobe Acrobat XI opens but unexpectedly stops after a few seconds. But above all, Illustrator does not start. I get the Configuration error message (error 1) and suggested to uninstall and reinstall the software (which doesn't help).

  I tried to change the permissions for the files SLStore and Adobe PCD. And indeed, the permissions for Adobe PCD have been set to read only for the admin.

  Unfortunately, change the permissions did not help. I get the same error message. Also, once I have reinstall the software, change the permissions to read-only.

  It happened just after upgrading to Mac OS Sierra. I have no backup, so downgraded to El Capitan is not an option.

  Please help, the standard solution has not worked for me and I need Illustrator to survive.

  (I use a Macbook Pro; 13 Retina display. end of 2015; 2.7 GHz Intel Core i5 processor; 8 GB 1867 MHz DDR3 memory)

  Elkoban if you create a new admin account you encounter the same error?  You can find details on how to configure a new account Administrator install or run Adobe applications in the new user account. Mac OS X .

• Cannot restart MacBook after starting Mac OS Sierra

  I have problems with the installation of Mac OS Sierra. It jammed last night at about 90%. I stop. This morning, I tried to start it without success. I then started with the command and R and choose to reinstall the software. This seemed to work, took forever, but when he resumed at the end of this process the small white obtained progress bar all the way to the end while it froze. I just talked to apple and told to try again, which I am. It took about 3 hours this morning. I checked my HD there are 117 GB of space. Another person had the same problem and managed to fix it?

  Start by holding down the command + R keys again if you can access the construction in utilities to check and repair if necessary startup disk, and then try to install the Sierra.

  On macOS recovery

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• Update Mac OS Sierra?

  Hello

  I've just updated to macOS Sierra and a glitch has occurred in iCloud mail that does not arrive in the stand alone Mail application.

  When scrolling in Safari using my mouse wireless, while displaying a ticket in iCloud mail the screen breaks upward around the pole?

  Is this a common problem after updating to Mac OS Sierra?

  Not a common problem.

  ¿Does it occur as well in Mode safe?

• Mac OSx Sierra Time Machine WD my cloud

  Since upgrading to Mac OSX Sierra my Macbook Pro and Macbook Air are not capable of doing Time Machine back Ups to a WD MyCloud drive that is connected to our router.

  We have updated the firmware on the WD My Cloud drive to the latest version and contacted WD on this problem, so far they have not come with a solution to the problem.

  If you open Time Machine preferences and then observe what happens, by hitting 'Back Up Now' systems do "Looking to save the disc" then "Preparing backup" then stop and then go back to the status of 'rest' without backup anything to the top at all. It is the same on both machines. You can see here: Time Machine Back Up My Cloud

  Notice how the drive icon changes to the point where it stops working and then goes to the other drive which is a USB.

  Now, to complicate the issue further... an iMac connected via Ethernet to the router can go back to the My Cloud drive perfectly as before. If Apple changed something with the wireless protocols I think but that?

  Hi stevefrompembury,

  Thanks for posting in the Community Support from Apple! I understand that your or your Mac back up Time machine since the update. Backups are certainly crucial to ensure that your data remains secure, so I'm happy to offer some suggestions.

  You have already tried a few milestones. I recommend you take a look through this article so that you have covered all the steps mentioned, including the section titled 'Control your readers': If you can not back up or restore your Mac with Time Machine

  See you soon!

• MacBook Pro crashed trying to load Mac OS Sierra. Can't back up.

  Try to upgrade to Mac OS Sierra.  Have a MacBook Pro (2011).  Latest operating system running.  Make the backup.  Downloaded Mac OS Sierra.  Settle.  Installation failed.  Retried, installation failed again.  I now trying to recover from a backup, but can not get the system to start.  I have only a screen with several languages, I chose English, but he was just sitting there with several languages scrolling on the screen.

  Hey Rocket281,

  If I understand correctly, you tried to install macOS a few times and it failed. Now you're stuck on language selection screen and it will not progress. I recommend you read this article, it explains how to start on the recovery screen and install a new version of Mac OS or disk utility to repair any problems, it can be seen.
  
  

  To boot from recovery macOS, hold down the command (⌘) r immediately after start-up or that you restart your Mac. Release when you see the Apple logo.

  • Backup restore Time Machine: Restore your Mac from an external hard drive or a Time Capsule that contains a Time Machine backup of your Mac.
  • Reinstall macOS*: download and reinstall macOS on your startup disk. macOS (command-R) recovery installs the latest macOS version installed on your Mac. macOS Internet recovery (Command-Option-R) installs the version originally supplied with your Mac.
  • Get help online*: use Safari to surf the web and find help for your Mac. Links to the Apple support Web site are included. Browser plug-ins and extensions are disabled.
  • Disk utility: Use disk utility to repair or Erase your startup disk or another hard drive.

  On macOS recovery - Apple Support

  Thank you for using communities of Apple Support. Have a good.

• Scan with preview - several Pages of a PDF THAT does not work in Mac OS Sierra

  Hello everyone,

  I had upgraded my Macbook Pro (early 2011) to Mac OS Sierra. A famous feature of older versions of Mac OS is to use Preview to scan documents to PDF format, joined the pages scanned all of a single document.

  After upgrading to Sierra this feature does not work correctly. The pages are not more combined into a single PDF. Anyone who has observed the same problem?

  Best regards from the Germany

  Jörg

  Yes, it's been posted here several times.

• Battery draining fast - after Mac OS Sierra update

  Hi, I'm not able to understand any cause yet, but my battery is dying real fast for the last few days since I've upgraded to Mac OS Sierra. I could use my mac almost for 5-6 hours on a single charge, but now his sentence stay for 2 to 2.5 hours. Everyone knows a similar problem? I was check activity monitor to see if any batch of your specific application, but I don't see anything different from what I had previously. Thoughts?

  Open the activity monitor and go to the tab CPU make sure the unider view all processes is check. What is using CPU?

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Just switch to MAC OS Sierra and Quicken Essentials is no longer available. Years of financial information must be consulted

  Just upgraded to MAC OS Sierra and quicken essentials is not compatible.  Have the financial years and news of tax which must be consulted.  Any help is appreciated.

  Return to your operating system previous (it was all saved right?), move the data and Quicken Essentials to a computer running a compatible version of Mac OS X or install a new version of Quicken.

  TT2