Similar Questions

• I have an Iomega external HD model MDHD320-T. It has been used on an older Mac OX9 Office running. Can I access data on this disc hard by downloading a software compatible with my current Mac OS Yosemite? Thank you! George

  I have an Iomega external HD model MDHD320-T.

  It has been used on an older Mac OX9 Office running.

  Can I access data on this disc hard by downloading a software compatible with my current Mac OS Yosemite?

  Also, I find no other than ads Iomega site.

  Are they still in business?

  Thank you!

  George

  Search Wikipedia for LenovaEMC.

  The chances of finding software are slim to none.

• Cannot run Microsoft Office on my computer because demand for product key.

  Original title: product key.

  Cannot run Microsoft Office on my computer because request product key... Where to find the product key on my computer?

  MicrosoftOffice should have a key with it when you bought it.  You need a special touch as the windows xp key

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• I can't install CC as well on a computer running Windows and a computer that is running with Mac OS El Capitan? Or is that something will be changed for download to a Mac?

  I can't install CC as well on a computer running Windows and a computer that is running with Mac OS El Capitan? Or is that something will be changed for download to a Mac?

  Hello

  CC Adobe license can be activated on 2 machines using the same Adobe ID.

  They can be 2 Windows Mac 2 or equal to 1; Setup is the same.

  Kind regards

  Sheena

• Computer running very slow for macOS

  Since I've upgraded to Mac OS this morning, my computer barely works.  I frequently get beach balls, and even simple tasks take minutes where they used to take seconds.

  It's an iMac of 2011 with 4 GB of memory.

  Difficulty installing Sierra

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.

  If the above does not help enough:

  Ways to help make a slow Mac faster

  1. 17 reasons why your Mac runs slower than expected
  2. Slow performance of Mac? This Article addresses!
  3. Difficulty of slow start in OS X | MacFixIt - CNET Reviews
  4. How to fix the slow down time and start. | MacTip.net
  5. 6 easy tips to speed up OS X Yosemite on your Mac.
  6. OS X El Capitan - if your Mac runs slowly
  7. Visit The FAQ XLab and read the FAQS on performance

  Avoid using any third-party cleaning software. Usually, this software does more harm than good. You don't need it. All computers become slower over time even in normal conditions of use. Experienced users erasing the hard drive and do a clean install from scratch, from time to time; or every time that the installation of a major update of the OS. Do means if you must maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Delete unnecessary anti-malware software and any software that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan activity. Also, visit The FAQ XLab and read the FAQ on the treatment with The Spinning Beach Ball of Death.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  With the help of Mac 'Pages '.

  A typing mistake?

  If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

  These are detailed in the help topics of pictures - a good place to look for help on the Photos

  View and add information about the photos

  You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

  Open pictures for me

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  Show titles, other metadata and badges

  Change the date and time of photo

  You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

  1. Select the photos you want to edit.
  2. Choose Image > adjust Date and time.
  3. Enter the date and time you want in the modified field.
  4. Click a time zone on the map, if necessary.
  5. Click on adjust.

• 800-002-a Phoenix envy: no sound on the desktop computer running Windows 10

  The Bureau uses the built-in IDT High Definition Audio Codec 92HD68E2 and there is no audio output from the headphone plug at the top of the ports page e/s or one of the two audio ports - speaker audio or audio line-out. I tested the speakers and the headphone on other devices and they work perfectly, so either making detection doesn't have or the problem is deeper than that.

  I tried without success to the following:

  1. Uninstall and reinstall the audio codec;
  2. Uninstall and remove the audio codec, then download and put it back in place.
  3. Open the sound control panel on the taskbar to see what shows on the Read tab - that is to say:
  • The speakers/headphones and headset Communication going from "not connected" to "ready" when headphones are connected to the headphone jack high. No sound in the headset
  • There is no change in the display when the speakers are connected to the audio ports.

  The only sound I get is a second monitor with internal speakers connected by a DVI cable. The problem may be related to the upgrade of the OS from Windows 8.1 to 10 but I can't be certain that I have not really tried to listen to audio files from the upgrade. Any help I can get would be most appreciated.

  Hello:

  See if the audio driver IDT W10 works for you...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

  If the driver above does not either, there is workaround that you can try to get at least the noise at work...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• computer running slow, I did a scan disk and Defrag

  What can I do else.. .i have done a scan of the disc and a Defrag... .my computer running slowly?

  Lack of information.

  Windows XP Edition with Service Pack _ _ (* if * professional edition is 64-bit?)

  What is the make & model of the system - especially if it's something in the sense of a Dell, HP, Gateway, Lenovo, etc. ?

  How much memory you have (RAM) installed?

  How many total and free space on your C:\ drive?

  What is your video & model device manufacturer?  It has its own memory or share some of your memory (RAM) system?

  Are all your drivers for hardware devices to date form the manufatcurers of individual hardware device?

  What application antivirus (name and version) are you using?  Have you ever used another?  Do you ever leave the expiration of the subscription on one of your antivirus applications?

  What internet connection speed do you have your internet service provider?  (Download and upload speeds, please.)

  If you have supposedly done a defrag and CHKDSK of disk... Okay - I suggest the following, in the order, repeating the defrag/chkdsk as given.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Computer runs slowly, and cut off when I watch or listen to the music or video

  My computer is HP Windows Vista - office computer.  My computer runs slowly, and cut off when I watch or listen to any video or music.  I tried restore, to restore all the drivers for the original version (but did not offer the video card) and all I could think to do.  My computer will not be completely updated anything - I think that my video card is bad.  What can I do?  inexpensive if possible preference.  Thank you!

  Hello Deedahday,

  Thanks for posting on the Community Forums of Microsoft Vista.

  This problem may occur because of many factors. Follow the steps below; It could help us solve the problem.

  Access the link below and follow the steps to optimize Windows Vista for better performance.
  http://windowshelp.Microsoft.com/Windows/en-us/help/83EC0FFE-EE04-4D53-8B87-25D1F05C954E1033.mspx

  Try to update display drivers:
  Try to access the computer manufacturer's website and select the model of your computer and download the latest drivers to screen for your computer and install the same.
  Access the link to download the drivers from the manufacturer of the computer: http://www.hp.com/#Support

  Also set the virtual memory of the system managed size:
  a. click the Start button and access control panel
  b. click on system and Maintenance
  c. click System.
  d. in the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  e. on the Advanced tab, under performance, click settings.
  f. click on the Advanced tab, and then under virtual memory, click on change.
  g. Select 'Size of system managed' and click on Set.
  h. click on apply and Ok.

  Restart the computer and check if it works very well.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can I transfer files from the old computer running XP to new computer before or after you move the new Vista computer to Windows 7?

  I have a computer running windows vista that I'm planning on upgrading to Windows 7. I will be transferring files and settings from my old computer running windows XP SP3.  Can I make the transfer to the new computer before upgrade Vista to Windows 7 or should I first, up grade for Win 7, and then do the transfer?  I also asked a previous question about the email, I use Outlook Express on the XP machine.  What happens to the emails, settings, and contacts once I use Windows Vista and Win 7 easy transfer to the have Outlook Express? The new computer has Outlook 2003 is installed, all the settings will automatically go to this program?

  Make the transfer later.  Everything you do is do more work for the upgrade.  It takes hours as it is.  Please use the forums of office for questions by email.  Click Office link in the banner at the top of the forum page.

• Windows could not complete the installation. To install Windows on this computer, run the Setup again.

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hey Abraham G

  you use discs of recovery that are made for your brand and your computer model

  and if you have problems using the manufacturer's recovery disks, you will need to communicate with them about

  It's their recovery process not microsofts

  Walter, the time zone traveller

• Professional information package launched by mistake on my Mac. Since then, the computer is out of order.  The app is always open to the dock, but cannot close or force quit it. Power button doesn, t make a stop. Computer is NOT frozen, but apps does not

  Professional information file on my Mac. Since then, the computer is out of order.  App always opens in the dock, but cannot close or force quit it. Start button / stop is not make a judgment. Computer is NOT frozen, but apps does not open. Cannot shut down, restart, or use something else! Help!

  If you hold the button power for more than 10 seconds, it will not shut the MBP?

  Try a SMC reset:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• I just upgraded to a new computer running Windows 7 to an old an XP running. I would like to transfer all my favorites, but I don't know where they are and where to go to in the new computer. Thank you.

  I just upgraded to a new computer running Windows 7 to an old an XP running. I want to migrate my old favorites to the new computer, but I don't know where to find them and the places where to migrate.

  I have the old drive from the computer.

  Thank you.

  See https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks

  and

  https://support.Mozilla.com/en-us/KB/backing%20up%20your%20information?s=new+computer & r = 4 & As=s#OS = Win & Browser = FX8