MacAfee blocked access to the web in Firefox?

Similar Questions

• Adobe flash player 11.0 blocks access to the Web site home pages

  Why is Adobe flash player 11.0, allowed to block access to the Web site home pages, until their trash is installed?  They should be prosecuted for punishment of the loss of time by Internet users, who spend countless hours trying to fix their garbage, which takes control of the web and blocks PCs access to their program settings, unless it is done according to their specific updates. N ' ILS OWN INTERNET and everything on it, or what?

  Are you sure he blocked it, or the web page requires Flash Player to see this?

  Most web pages require an element of Adobe Flash Player.

  First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Re-uploaded because there was no access to the web, and it is not yet. Opens in private browsing, no Firefox tab is visible, so I can't do anything.

  I don't remember having chosen Private Browsing until I deleted Firefox on my computer. After you download from the Web site, the same screen appears. It does not resemble the Web site displays. I have a screenshot, but don't see a way to fix it here.
  The top line is blue background of Windows and said "Start Mozilla Firefox - Mozilla Firefox (private browsing) Page".
  Lower than that of the context Tan the usual File, Edit, View etc.
  Lower than a tab with: the image of Fox and the "Mozilla Firefox Start Page.
  Thaat below: arrow, arrow, box "go to a Web site", and arrears on the right a blue g and a tab drop down to search engines, down for downloads and the symbol of the House.
  bottom line usual Google that shows that my most used bookmarks
  The large area below that contains the symbol of the Fox in the Center above the search box (which does not). In the upper right corner is "mozilla" gray type.
  Crossing the lower part is a clear grey banner with "downloads, Favorites, history, modules, sync and Settings" with their symbols above.
  I had to remove PC Matic Supershield to get the download to work at all, and now after hours of tests, I am right where I started.

  Make sure that you are not Firefox running in (permanent) private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  You can check for problems with preferences and try to rename or delete the file prefs.js and possible prefs - numbered # .js and a user.js file possible to restore the values all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• I want to block access to some Web sites when using firefox, how do I do this?

  I would like to be able to block access to specific Web sites when using Firefox as my browser. How can I do this? Thank you.

  Block / unblock websites with parental control on Firefox

  https://addons.Mozilla.org/en-us/Firefox/addon/BlockSite/

• Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer. I prefer Firefox. Help!

  Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Malware bytes blocks access to the 78.41.203.120

  a program on my computer tries to access the IP 78.41.203.120

  Malware bytes blocks access to the site saying it's dangerous.

  I can't find information on the web.

  Any help?

  Hello

  78.41.203.120
  http://dawhois.com/IP/78.41.203.120.html

  You should check with the support of Malwarebytes and their forums.

  Malwarebytes - Support
  http://www.Malwarebytes.org/support/

  Malwarebytes - Forums
  http://forums.Malwarebytes.org/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• my windows Live ID has been blocked access to the vlsc site. What can I do?

  I tried to access the vlsc site, and I got a page saying that my account was blocked access to the site.

  WHA t I can do

  Your login status is invited or blocked because you are currently signed in with a Windows Live ID that is not associated with the Microsoft Partner Network.
   
  While you are connected as a guest, you will be able to access content available for public view. Links that display locked icons are contained premium for members of partner network, and you will not be able to view that content until you either you sign in with a Windows Live ID associated with the network of partners or register in the network of partners and then sign in with your newly associated Windows Live ID.

  You will need to check with the Volume Licensing Service Center:
  https://partner.Microsoft.com/us/40046574

  
  For more information about how to contact the VLSC, click below:
  https://partner.Microsoft.com/us/40031077
   
   
   
  Sincerely,

  Marilyn

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• N3048 access to the Web Interface without OOB

  I recently had our switch replaced by RMA and have access to the web interface via oob. I'm not sure how to access ports and other subnets and want to access the web interface of the server room outside. It's probably something very obvious, but I don't have the original switch to check the configuration. Any help would be appreciated. Thank you.

  You can use in-band or oob access to administration from inside or outside the server room.  The port of oob is a completely separate network used for management only, but you can also use a port in the Strip management.  By default, VLAN 1 is usually used in the Strip to transport of management traffic.  If you set an IP address on VLAN 1 you should also be able to manage from this IP address.  Measures would be to define the IP address on VLAN 1, ping ping to test connectivity, remote and then use your browser to connect to the web INTERFACE.  You should be able to use the same username/password that was used for the oob port.  Without a set of name of user and password, the web INTERFACE will not allow the session.

  B

• [MOVED] Update McAfee blocks access to the AOL software and software window Internet Explorer

  UPDATED July 2,2012
  Update antivirus software McAfee (McAfee software provided when I bought this Dell computer)
  It's so I can't connect to Internet after reboot
  with cable broadband from AOL or Windows Internet Explorer software on
  Windows 7. Programs are not blocked the McAfee software programs
  complete access... It seems that just programs cannot "find" the modem broadband
  in Windows 7 professional OS after your update... The other weird thing is
  The accuweather by Dell can access the Internet and produce of the time, date and
  weather on my monitor. I disabled the wireless connection that
  is integrated into the motherboard of Dell. I also tried to reinstall the modem
  (AT & T - Motorola 2210 Modem) software from the original CD but I get the message there is no 64
  driver bits. I had to use a restore five times point to eliminate the five
  try to update your software... What makes the limited Mcafee anti-virus software
  utility, since it can be is more updated. Virtual Technician of McAfee said that he is
  nothing wrong. Of course when the McAfee service is updated I can't chat on the
  NET with McAfee technicians ' sr since I can't access the Internet.
  McAfee technicians have no idea what is the problem.
   
  Windows says I have the latest driver upfdste for the Broadcom Gigbtye Ehternet, who manages the modem.
   

   

  I worked hard on this for so long and McAfee still blocking access to the Internet if I update definitions so to restart so I removed a second time. I installed the program software Antivirus malware from Windows and the Windows Firewall, which turns on automatically when you remove McAfee.  Intel took a horrible investment decision buy McAfee.

• The accessibility of the Web APEX is consistent?

  I am referring to the Web Content Guidelines of the accessory (http://www.w3.org/TR/WCAG20/).
  
  For most of the projects of governance, the requirement is that any application is supported - the accessibility of the web. This means, it doesn't have to be unencumbered, but that of alternatives not indicated if any user has some disadvantage (disability or some options turned off, etc.) and cannot use a special function.
  
  I would like to know if anyone has experience with the type of action must be taken to ensure that an ApEX application is «supported web accessibility» Y at - there no official statement on this subject and the Apex Oracle?
  
  I have my doubts about the use of
  * Icons = > may depend on the theme, but is always a text alternative for the included icons?
  * JavaScript = > APEX Will still work if JavaScript is disabled?
  * Cookies = > I think apex may work with sessions of the url instead of using cookies. Has anyone ever tried?
  * ...?
  
  _ applications based on the overview of the requirements of the W3C for browser
  
  Noticeable
  
  -Provide non-text content text alternatives.
  -Provide captions and alternatives for audio and video content.
  -Make content adaptable; and make it available to assistive technologies.
  
  -Use sufficient contrast to make things easy to see and hear.
  
  Operable
  
  -Make all the keyboard of accessible features.
  -Give users enough time to read and use content.
  -Do not use the content, causing convulsions.
  -Help users navigate and find content.
  
  Understandable
  
  -Make the text readable and understandable.
  -Make content appear and operate predictably.
  -Help users avoid and correct mistakes.
  
  Robust
  -Maximize compatibility with current and future technologies.
  
  Published by: W. Sven on September 11, 2009 11:54

  Sven,

  I did some 508 complaint with APEX development in the past, and it is really very easy.

  The mechanism of the apex model makes it easy to make your 508 compliant applications. The only thing to keep in mind when creating applications is that less is more; You may need are reluctant to use jQuery or other frameworks based on JavaScript, because they usually give screen readers a moment difficult.

  The directives that you posted are a good start. There are also a lot of information available online, more precisely at http://www.section508.gov/

  Another thing - we were able to get a couple of disclaimers with some of the more complex pages that we have built, as they were not for all users, but only for a select few users admin.

  I hope this helps!

  -Scott-

  http://spendolini.blogspot.com
  http://sumnertech.com

• Sometimes when I access the net via firefox, a new tab opens and opens on a Web site. How can I block access to this Web site?

  When I access the net with firefox, a new tab opens on a specific page. How can I block access to this site or stop firefox from loading? Here is the site in question:
  http://AdultFriendFinder.com/go/g1110961-PMO
  not once have I ever accessed this site and it doesn't show up in the browser history

  This has happened

  A few times a week

  is since I started using firefox

  Make a check of malware with a few programs to scan for malware.
  You must use all of the programs, because each detect different malware.
  Make sure that you update each program to get the latest version of the database.

  http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  http://www.superantispyware.com/ - SuperAntispyware
  http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
  http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  ..........
  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked

• SRA 4600 Web Application Firewall blocks access to the Portal login page.

  We have a 8.0.0.1 - 16 4600 running and run the Web Application Firewall.  We had a few reports of users home that our portal page was not available, only tried IE, but everything went well here.  Today we had an internal machine with the same question and noticed that it was blocking WAF access: "threat of avoided WAF: Injection SQL 1 attack" you can see nothing wrong with this machine that may be cause the WAF to block the Portal login page.  Here are the event log:

  "Jun 10 09:34 sslvpn1 SSLVPN: id = sslvpn sn = C0EAE4745184 time =" 2015-06-10 09:34 ' vp_time = '2015-06-10 14:34 UTC' pri fw = xx.xx.xx.xx = 2 m = 34 c = 402 src = dst = xx.xx.xx.xx xx.xx.xx.xx user = 'Unknown' usr = 'Unknown' msg = "prevented WAF threat: SQL Injection attack 1 ' URI=remote.ncmic.com:443/ rule-match =" _ga = ga1.2.1366358136.1433946841; " _dc_gtm_ua-21325736-1 = 1 "AttackCat = 'SQL Injection attack 1' somm ="SQL Injection is a technique of attack used to exploit websites that construct SQL statements from user-supplied input,"hamid = category '9005' = 'command execution - SQL Injection' agent =" Mozilla/4.0 (compatible; " MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; Tablet PC 2.0)' geoCountryID = '0' geoCountryName = 'LAN' geoRegionName = 'unknown' geoCityName = 'unknown '.

  Other machines can access the page without problem... thoughts?

  Can not reproduce this problem at the moment...

• Control Parental Windows blocks from across the Web

  Well, before you start, please don't tie me to the same danged tutorial. I have NEED OF KNOWLEDGE HOW CONFIGURE THE PARENTAL CONTROLS. I NEED TO KNOW HOW to STOP BLOCK ACROSS the WEB . You see, here's the deal: the setting on my user account is block only pornography, adult content, bomb, Cook, drugs, etc.. The box marked "unrateable content" is not checked. And yet, it does not block all the web only on this basis: I'll have to use the administrator account to access the same this! And so I thought, let's restart it in safe mode, because the computer doesn't even have the parental controls in safe mode. But here, even in safe mode, the entire web is blocked on the unrateable content database.

  Yet once, please don't tie me to this danged tutorial bleepingcomputer you people seem to thing is a panacea for everything here. And please excuse me if I look a little snippy. I am right now (I hope it's understandable) a little frustrated.

  Suggestion only:

  Login to your admin account > create a new user account > set up Parental controls in this new account with exactly the same restrictions > disconnect.

  Logon to the newly created user account > no parental control blocks all Web sites?

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.