MacBook didn't stop after upgrading to 10.11.6

Similar Questions

• MacBook pro 13 "stops after apple logo

  -Macbook Pro 13 "(end of 2014) with El Capitan

  After I did a reboot of the machine now my macbook OS X won't start, it just shows essentially the apple logo and a loading bar, and after a long period for the load bar (which is not normal) to arrive at the end it's just stops.

  I have all the updates, installed about 2 weeks ago. The last thing I did was to install an update to a Note, and then restart the laptop. I did no physical damage to the laptop or anything like that... so I'm naïve, what the * happened here.

  All the solutions to continue on that?  Any way to re - install OS X without losing my files? Cause first for this?

  Or maybe a way to fix the "boot partition" on it?

  Most likely guilty is the installation of a single Note - After all, everything worked fine until you did this installation.

  Try to see if your mac can boot safe mode (hold the SHIFT key immediately after pressing the power button).

  If he does, either try to simply restart normally (sometimes it's just a bad cache and start in Safe Mode clears him and everything is ok), or to uninstall a single Note.

• MacBook does not start after upgrading software to El Capitan 10.11.2

  I upgraded macbook pro at El Capitan 10.11.2 since the previous version of El capitan today and it crashed after the reboot.

  The macbook now hangs with the apple icon and scale of departure about half.

  Please help on how to solve this problem. I just want to cancel the last update.

  Thanks in advance for the help.

  Have you tried to make a start by holding down the SHIFT key to power?

• Problems with sleep and stopped after upgrade to Windows 10

  Hello

  So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

  Any solution to this problem?

  Thank you.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• Satellite A100 stops after upgrade memory

  Consider me the thickie Pack 1... Not sure wot im talkin end but n e way...
  Have a Satellite A100 570 (PSAA2E)...

  Tried several websites online lookin for memory upgrade. Did not have the witt to use the toshiba site... Eventually get to the point...
  Ran the Diagnostics on laptop and sent module one needed.or so I thought... wrong 1 or 1 s I bought 2 x 1 G modules in order to 'double '...

  Got my money because they were not compatible with my system... something to do with the problems of density...
  Tried company called OFFTEK... they seemed to know what they were talkin' about... I'm Offtek. at present one...

  200-pin 1.8V SoDimm PC2 - 4200 DDR2... but Toshiba recommended below...

  1 GB memory DDR2 PC2-4300 (533 MHz)
  Part number: PA3411U-2M1G
  1024 MB (1 GB) memory PC2 - 4300 DDR2 (533 MHz)

  Theres an obvious difference... 4200 and 4300. But I'm not sure if there is a significant difference... or what it means
  Update the bios to the version latest and basically put all that toshiba had to offer for this model...

  EVEREST ran and it recognizes the module 1 G but when I pull out the original 512 MB module, the laptop starts for about 3 seconds then stops...
  This repeats about 5 times then fill stop...

  I don't like open the back cover too often but it's the 3rd module...
  Don't know what is supposed to happen if the module works... IE launch message... dunno if windows recognizes module 1 G...
  Would be - this bet safer to send Offtek module and stick with option of toshiba...

  Thanks in advance...

  Hey Buddy

  Have a look here:
  Memory for Toshiba Satellite A100-570
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=23658&ft=m&St=3

  You can use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM bars!

  The pc2-4300 Rams are the same as PC2-4200. It s just a marketing gag PC2-4300 are PC2-4200 modules that can be overclocked by some versions of BIOS PC desktop

  However, you must take the PC2-4200.

• Mac didn't stop after Photoshop to access files on windows server

  Hello world

  We have a weird problem when our users access files on our server to windows. They can change the files and everything seems to be fine, but when you try to shut down the mac, the system never end closing, even after waiting until the next morning. Only way to stop this force turned off. Someone at - it an idea, how do I solve the problem?

  We have verified that the problem only occurs when you open files directly on the share - local files do not cause this problem. There is also no other apps to access the share.

  Specifications of customers:

  Mac OS 10.10

  Photoshop 2015

  To access the files via smb share (smb: / / [Server].) FQDN/Share)

  24 gig RAM

  128 GB Flash drive

  27 "iMac

  Specification of the server:

  Windows Server 2008 R2

  NTFS file permissions: full access to the security group

  Client is a member of the security group (but not in the same domain as the file server)

  So far ideas? Someone has a similar problem?

  Best regards

  Tobias

  Hello

  When you try to access the files on the server, MAC launched a security process.

  This process could not be top-down.

  Please check that the activity monitor.

  For the best response you can contact Apple/MAC support.

  As Windows uses MAC system MAC OS partition and FAT/NTFS partition

  There could be conflict as well.

  Also please check if a Windows machine attempts to access Windows Server, the problem still exists.

  Concerning

  Jitendra

• PSC 2355 all in one printing stopped after upgrade windows 8.1 scan is OK.

  I have a HP psc2355 printer worked happliy in window 8. I downloaded and installed windows store 8.1 and the printer no longer works!

  With the printer Open (via Control Panel) status window, the details of the document briefly appear when you click the button print. Nothing happens at the end of the printer. Theres nothing wrong with the printer as I can use it on another PC without problem.

  I uninstalled and reinstalled the printer using hppiw 2012-10-31 and the HP print and Scan Doctor V 4.1.0.29 which gives an error in device "your printer is in a busy state" after an attempt is made to print from applications or properties of the printer/print test page.

  that self-test prints OK.

  Scanner works OK

  Printer is connected via rirectly USB cable to the USB port on the PC

  Windows Update ran this morning

  3 hours lost so far!

  SOLVED * printer properties Advanced tab Print Processor change Print Processor to winprint hpzpplhn settings check the default data type is RAW print OK now HP has gotten support jobs going?

• Sleep, stop after upgrade to Windows 10 - The Solution!

  Hey all.
  
  Just uninstall Management intel Version 11 and 9.
  
  or install this SP and it will delete 11 and install version 9.
  
  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe
  
  that will solve the problem. 100%.
  HpSA will be updated around 11, disable the hpsa update
  
  Have fun!
  
  Professor.

  This solves all the problem with Pavilion and Windows 10.

  You can read my post here.

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-Hangs/Windows-10-updated-now-HP-Pavilion-won-t-wake-up-from-sleep/TD-p/5176160/page/17

  After my my many user help solve this problem.

  The page is to Big, so I made a new to help the new user to find a Solution.

  Have fun.

  Professor!

• Trackpad MacBook Pro late 2011 does not not after upgrade

  I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

  Hello Med_,

  Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

  You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Reset the management system (SCM) controller on your Mac.

  If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  See you soon!

• stop taking too long after upgrade sierra - about 20 minutes

  After upgrading to Mac OS sierra, does take about 20-25 minutes for the stop.

  After command to shutdown or restart, screen off, lights remain on for keyboard and apple logo.

  MacBook Pro (retina, 13 inch, mid-2014)

  I found the culprit. MySQL server taking too long to stop. But do not know how to fix it.

• MacBook Pro(MID-2012):Issues after Upgrading to El Capitan

  I use Macbook Pro mid-2012 version. After upgrading to El Capitan, I am facing a lot of questions.

  (1) the DMG files does not open. said hdiutil attach has busy resource failed.

  (2) my Macbook Pro will not stop completely.

  (3) my systems updates install completely. They hit each other between installation (had to force quit)

  ' (4) ' about this Mac ' gets hit when trying to access storage tab.

  Any suggestions?

  Your MBP was working perfectly before the update?

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.

• 6540 b after upgrade windows to windows 7 bi-ecrans has stopped working

  After upgrading my computer (6540 b) to windows 7 the bi-ecrans has stopped working. Help, please

  40043330 wrote:

  After upgrading my computer (6540 b) to windows 7 the bi-ecrans has stopped working. Help, please

  Hello

  You have installed all the necessary graphics drivers? Is there a graphics dedicated ATI Radeon HD, etc? If Yes, go to the ATI Control Center and have a look for dual monitor settings.

• ASDM issues after upgrading to JAVA 8 on Macbook

  Hi all, I have a MacBook running and just put 10.10.2 upgraded to version Java 8 40. You'd know ASDM began to 'freeze' after that I connect to the device and ASDM is attempt to analyze the configuration. What happened when I hit an ASA 5545 9.3.1 running code (ASDM 7.3.1) but it does NOT occur when I type an ASA5520 9.1.5 older code running (ASDM 7.3.1). Odd. Anyone else seeing this? Sure enough when I drop Java to 7 build 75, AMPS works well again when I connect on these devices.

  As a test, I improved ASDM to 7.3.3 and moved to the top of the size of the heap by the release notes, but that did nothing to solve this problem. ASDM freezes again as his attempt to analyze the configuration (about 2 to 4 seconds after I login).

  For any help or suggestion would be appreciated.

  Thank you

  The f

  Looks like you hit the following bug

  CSCut04399

  ASDM crashes on MAC after upgrade to Java 8

  Workaround solution:
  None

• On Windows 7 upgrade from vista 64 bit stops after that it says the settings and files of collection

  I am tring to install Windows 7 upgrade from vista 64-bit.  I'm to the point where it says collect files and settings, and it stops running, and then in the details it shows 3 files located in the c: users\my name\appdata\local\temp\WER followed by numbers.tmp, then version, appcompat or mdmp. (example: wer5090.tmp.version.txt)  He said that these files are the reason. Any ideas how to solve this problem?

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  If the upgrade continues to fail, you might want to consider doing a custom installation:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/