MacBook pro retina start/stop

After installing OS X 10.11.6 my macbook pro retina spontaneously restarts or stop.

Any ideas?

Thank you

m

Mine breaks down several times in mobile mode.   However it never crashes when I use the HDMI port connected to a monitor

Tags: Notebooks

Similar Questions

  • help my macbook pro retina 13inch started itself and turned off while in the case

    as the title, my Macbook pro retina (bought in 2014) is transformed and then turn off 5 minutes later while in his case today, I only noticed after reviewing the event log and seeing a start and stop.  How can this happen? the Mac was definitely off not asleep and I did not put a timer.

    It is unusual for a Mac to act this way, but this is not the first time that I heard about what's going on.

    It looks like a problem SMC and is easily fixed by a reset see here reset management system (SCM) controller on your Mac - Apple Support this will most likely solve the problem.

    If this isn't the case, then it could be a simple sticky switch?

    A visit to a Genius Bar is perhaps a good idea if the SMC reset does not work for you, and a new OSX installation did not help.

  • 13 "Macbook Pro retina heats up on the bridge and google maps satellite

    Hello!

    I have a 13 "Macbook Pro retina

    I noticed that when using google satellite view maps (no matter if in Safari or another browser) my Mac begins to quickly heat up to 102 degrees Celsius (I use https://www.seense.com/menubarstats/ to measure the speed of the CPU temp and fan, but even without any application, you can easily feel the high temp and hear the blowing fan) the fan also starts to blow at maximum speed. When I left the site everything returns to normal.

    Same thing happens when I discover the overpass in Maps.app. When I left the temperature goes down to normal.

    I can compare the situation with my MacBook Air a years more and I have none of these problems in this regard. Strange that both Mac have only the Integrated GPU. No idea what may cause heat upward? Dealing with the satellite or view 3d demanding for rMBP but not for the older MBA buildings? Both on the latest version of the model

    Thank you!

    Hello there, villovsky.

    Looks like you see increases in temperature and fan problems when using particularly intense applications on your MacBook Pro. The following Knowledge Base article offers up to large initial measures for troubleshooting:

    Reset the management system (SCM) controller on your Mac.

    Before resetting the SMC

    Reset the SMC only after trying all the other standard troubleshooting. Try each of the following steps in this order before resetting the SMC. Test the issue after performing each step of troubleshooting to see if the problem persists.

    1. Press Command-Option-ESC to force stop any application that is not responding.
    2. Put your Mac to sleep choosing sleep from the Apple menu. After that he went to sleep, to wake up the computer.
    3. Restart your Mac by selecting restart from the Apple menu.
    4. Stop your Mac by choosing stop from the Apple menu.
    5. If your Mac does not, forcing the Mac to stop by pressing and holding the button for 10 seconds. You will lose any unsaved in all open applications work.

    If you are using a Mac laptop, which is the power or battery issues:

    1. Unplug the adapter from your Mac and the electrical outlet for a few seconds, then plug it back.
    2. Stop your Mac.
    3. Remove and reinsert the battery, if it is removable battery.
    4. Restart your Mac.

    If the problem is still not resolved, you may need to reset the SMC. See indicators and the steps below.

    Indicators that need to be reset your SMC

    After you perform a standard troubleshooting, these symptoms can indicate that a SMC reset may be necessary:

    • The computer fans operate at high speed, even if the computer does not have a very heavy use and is properly ventilated.
    • The backlight on the keyboard not behave correctly on Macs with this feature.
    • The led State (SIL) not behave correctly on Macs with this feature.
    • Battery LEDs, if present, are not well behaved on laptops Mac with a non-removable battery.
    • The backlight of the screen does not correctly to changes in ambient light on Macs with this feature.
    • The computer does not respond to the when you press the power button.
    • Mac laptop does not properly when you close or open the cover.
    • The computer sleeps or stops unexpectedly.
    • Battery does not charge properly.
    • The MagSafe LED power adapter does not have the correct activity.
    • The computer performs exceptionally slowly, even if she is not experiencing abnormally high CPU utilization.
    • Application icons can bounce on the dock for a while when opened.
    • Applications may not work correctly, or they may stop responding after the opening.
    • A computer that supports target display mode does not switch in or out of target display mode as expected, or it goes in or out of view target at unexpected times.
    • Autour lighting of on a Mac Pro I/o ports (end 2013) does not turn on when you move the computer.

    Reset the SMC on Mac Laptops

    First determine if the battery is removable. Computers Mac notebooks with a non-removable battery include MacBook Pro (early 2009) and later, all models of MacBook Air, MacBook (late 2009) and MacBook (retina, 12 inch, early 2015). Learn more about batteries for computers laptops Mac.

    If the battery is good behaviour

    1. Stop the Mac.
    2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
    3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
    4. All the keys to unlock, then press the power button to turn on your Mac

    If the battery is removable

    1. Stop the Mac.
    2. Unplug the MagSafe from Mac power adapter.
    3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
    4. Press and hold the power button for 5 seconds.
    5. Reconnect the battery and the MagSafe power adapter.
    6. Press the power button to turn on the Mac.

    The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

    Thank you for being a part of the communities of Apple Support.

    Kind regards.

  • Notes to close unexpectedly on the Sierra of MacBook Pro retina

    I can't open my Notes on Sierra MacBook Pro retina. I got this error after autoQuit "notes close unexpectedly". Any suggestions?

    Thank you.

    Hello iCodyRo,
    Thank you for using communities of Apple Support.

    I understand your message that you cannot open Notes on your MacBook Pro after installing macOS Sierra and get an error saying, "Note close unexpectedly". I know how it is important for you to be able to access your notes after upgrading the software on your MacBook Pro. I recommend that you restart your Mac in safe mode and it. Then, restart your Mac as usual and test again. The following article includes the steps to restart in safe mode:

    Try safe mode if your Mac does not end commissioning

    Start in safe mode

    Follow these steps to start in safe mode.

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    Best regards.

  • MacBook air water damage recovery of data flash storage of air from macbook to macbook pro retina

    Last week, I spilled water on my macbook air that extinguishes immediately after that.
    It's been a week that I let it dry without attempting to start.

    Unfortunetaly, I did have a backup for 2 weeks, (of course bad luck should come at the wrong time), and I really need to get my data from the flash ssd drive.

    I thought to transfer the player of Flash ssd of the macbook air to a macbook pro retina and retrieve the data since the macbook pro retina by making a backup. Would this work? This would not damage the macbook pro retina?

    I have a macbook air early 2014, the macbook pro retina is also the same year.

    Thank you very much for your answers.

    Best regards.

    You'd better using an external enclosure of the MacBook Air SSD rather than MacBook Pro.

    https://eShop.MacSales.com/item/OWC/MAU3ENPRPCI/

  • Low battery Macbook Pro retina

    Battery cycle count 147 to macbook pro retina 13 mid-2014, but the runtime is 4-5 hours with browsing the web, I checked the tasks and reduced the screen, nothing helps.

    We do not have apple store in our region, so try to help please.

    Hi dtsaturyan,

    So happy you stopped by the communities of Apple Support today! It seems that you are having problems with the battery lasts only not nearly as long as you expect it. I have a MacBook Pro as well, and I depend on to give good battery life as well. I'll be happy to help you with this.

    Batteries for laptops on Mac, has a wide range of information and troubleshooting on the batteries. I would recommend that you check that you see the section titled 'Optimizing battery life' this will give instructions step by step to help ensure the best set up for the health of your battery. Also, run hardware using the Apple Diagnosticstests.

    OS X El Capitan: manage your laptop battery, this article of support will more more information on the power adapter and the follow-up of your battery from your computer.

    See you soon!

  • Flashing question mark in the Macbook Pro Retina early 2015 at startup problem

    I have the 128 GB of Macbook Pro retina early 2015 model. I bought my macbook, the year last January 2015. I am just now having problem with my mac. When I'm trying to boot my laptop it shows the flashing question mark and it does not start after that. For a while it worked, but after the update the laptop is never again.

    After reading all the articles related to this issue and even after trying it the entire process for the departure of mac. I'm not able to start.

    I tried all the normal recovery process in the process of recovery of the internet, but still it does not work for me. When I select the disk utility in the dialog box, the drive does not appear here, so I can't erase and start to reinstall the operating system.

    What should I do now? I was looking for OEM SSD, but it's very expensive. with this prize money of (here in INDIA RS - 50 k) I can get the Macbook Air.

    If please guide me on how to start the mac or what do I do next?

    Thank you.

    Frank Bsu

    We have no way of knowing exactly what you have tried that doesn't work unless you tell us. A flashing question mark boot means that your Mac is unable to locate a startup disk to boot from.

    If you haven't tried... start your Mac holding the key Option. That should launch the boot window manager have been, you can select the startup disk, and then click on restart.

    If this does not help, you will need to take the Mac for the service.

    If a flashing question mark appears when you start your Mac - Apple Support

  • Screen freezes randomly (Macbook Pro retina 13 inches early 2015)

    MacBook Pro (retina, 13 inches, early 2015)

    OS X Version of El Capitan 10.11.4

    Processor: Intel Core i5 at 2.9 GHz

    Memory: 8 GB 1867 MHz DDR3

    Graphics card: Intel Graphics Iris 6100 1536 MB


    I bought this MacBook on the Apple store online a year ago, and I must say it has been a very reliable machine up to now. It starts way faster that any laptop I have ever used before.

    However, recently to update my OS on the 10.11.4 version, my screen freezes randomly. The keyboard and trackpad are both unresponsive.  Closing the cover does nothing either, since the macbook won't sleep normally as it would be. The only solution I had was to hold down the power button to force it to close.  This has been extremely frustrating and made me lose valuable data too.  I ran the Diagnostics of Apple and the only error seems to be the battery issue. It has been said, however, that it should not affect the performance of the computer.


    If someone has encountered this problem, great tips, thank you would be much appreciated!


    Hey, I bought the same macbook 6 months ago, the macbook had several recurring problems, graphic and audio glitches, what happened was, sometimes (for watching movies, or playing games) the screen went black with a red line on the left side of the screen, then after 2-3 seconds screen is returned to normal, and then there was a glitch-audio distortion that attaches after 10 seconds - 1 min.

    I have tried to solve this problem, because to the 4months, 2 authorized repair shops are rendered as well an apple store, they told me that the tests have said everything was perfect, they failed to reproduce this problem, and that is probably a software problem, it wasn't, because I did everything to eliminate the risk that this was a clean install os software problem to use different browsers, readers different flash etc.

    About a month and a half my macbook froze for the first time exactly like yours, frozen screen, slider became unresponsive, caps lock light insensitive, trackpad locked (didn t click), closing the screen was always on the apple logo. I did exactly what you were doing, forced to shutdown by pressing the power button.

    I was furious, thinking that this is an escalation of the hardware failure and he was in awe of this next step is to "die".

    The next time he "froze" again, I went to the apple store nearby with the macbook in a frozen state and demanded that they fix it, I insisted the guy writes it down and describe the exact condition of the macbook was when I took it to them, and he said that they will run tests and see When I tell him that it is the "millionth" time test you my macbook, he said, that even if the tests show nothing they will replace the logic board, we signed a "service record" who says that they will replace the logic board and the battery and for the first time that I was happy they will finally fix.

    I was wrong, they called me a week later and say we took some tests and everything is ok, it was the last straw, I did not pick up the macbook and said that I will not pick up unless they fix it.

    Next day I went to the store and made a big fuzz, saying: I have contacted the Ombudsman, and I'll still take legal action if they didn't fixed it the next day.

    Next day I went and they had replaced the logic board so the top-case with battery.

    The reason I say this is, their support at least in my case, it was terrible to the point that I preferred to throw the macbook in the trash and never look back, you can't really imagine how long it took me to convince to repair or replace, for 4months I was on the phone or online chat and was flowing like a ball from one to the other.

    If you are still under warranty, go directly to the apple store and request a fix, when I say request, do not be polite, don't bite on phrases like "we will do everything, so you won't have to come back again," go aggressive mode, because at least in my case, be polite did not help, the best thing would be, when it freezes again not turn off it take it straight to the apple store.

    Another thing is, I had a battery problem when running the diagnostics, whenever I gave it to them they said oh "battery is ok, sometimes the tests fail," my argument? If the tests fail how do you rely on them...

    Go and demand, it is their responsibility to fix, 3 and a half months being polite is not done, I'm aggressive and stares at me in 1 week.

    Good luck

  • MacBook Pro retina slider made trails on screen

    I have a brand new 15 "Macbook Pro retina and intermittently when he wants the cursor will trail across the screen. If you get on the slopes with the cursor, it erases the. Very strange. I tried to take screenshots of this phenomenon, but they do not appear in the screenshots and they also disappear after taking the screenshot. It is difficult to recreate, but it seems sometimes when I start Lightroom CC or change the resolution to "scale", it happens. I could talk to one of the 'genius' and he said it was a known software problem, but I can't find hide or hair of it anywhere on the internet. I'd hate to have to consider and be without it, if it's something as simple as a software problem that I'm able to find me the solution. I have erased HD and did a 'clean' of El Capitan install already, since I don't have much on this machine to restore. No help, it still occurs at random. Thank you advance.

    Macbook Pro 15 "retina

    2.8Ghx quad core

    16 GB of ram

    512 GB of storage sad

    2 GB of Intel and AMD Iris Pro video

    El Capitan 10.11.3

    It is not a software problem known with the operating system. I bet it's a matter of Adobe

  • my macbook pro retina display will not download large files

    I had this problem happen to me twice before involving 1gig zipped files or files unzipped pretending to be finished in the download bar. It shows for example 309,5 309,5, the loading bar does not disappear. I try to click on it and it tells me "this son is still downloading. So I get in my downloads folder, click on the contents of opened, I look for the file and click on it like that, it gives me the possibility of reactivation of the zip folder, I do this, then it gives me an error message saying "files are not completed. (I give him hours and hours to 'finish loading' and then try again)

    Then... This has been recently. The first file I wanted to download was the Creative Design Premium Adobe (I waited half a day until the next day for this download click again on it) that is given to me directly in the downloads section of the adobe.com site. I need to reinstall the software due to an unknown error (YOSEMITE LIKELY) anyway... I start downloading, it ends - but not really. Something is happening. So I try it on Chrome, same problem. So I try it on a PC - made. No worries.

    So far I have not seen this question arise with someone else.

    The zip in question file is .7z and 335.9 MB file and the creative design premium is a 3.76 GB .dmg. I am running Safari on a

    MacBook Pro (retina, 15 inches, end of 2013)

    10.10.1 Yosemite

    MacBook Pro, Mac OS X (10.7.5)

    Start in Safe Mode, no doubt also resets of LANDAU and SMC , and then restart your computer normally.   See if the problem clears.

    If there is no anti-virus or anti-malware tools installed, any improvement in performance, of cleaning cache, optimizers any system or other such tools add-on, remove all those who, according to the instructions of the specific package.   Try the download again.

    Try downloading on a different network.   If it is a company or a network of offices, there may be filters and monitors in place, which can cause problems with the downloads.

    If all else fails, after the release of Etrecheck, and we will look to the configuration and what is installed.

  • I can't connect my headphones on macOS / Macbook Pro retina

    Hello

    I can't connect my headphones (Bose SoundSport headphones) on macOS / Macbook Pro retina. When I look for them on the search list of bluetooth, I can find and pair, and even if it says its connected, it does not appear on the list of the sound source. Can someone please help me to implement?

    Thank you very much

    -Rachid

    Hey rashidansari,

    After reading your post, it seems that you are able to pair your headset Bluetooth for the Mac, but it is not appear correctly. This article may be able to help with that.

    OS X El Capitan: If your Bluetooth headset does not work

    Thank you for using communities of Apple Support.
    Good day.

  • MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

    MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

    Doesn't look like 4K is a good option.

    /macbook-pro-retina-display-how-to-manually-switch-http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

    Graphics.html #extdisplays

    Built-in display: 15.4 "Widescreen Native resolution: 2880 x 1800
    Details: This model has a screen 15,4 "color widescreen LED backlit with IPS technology with a 2880 in native resolution from 1800 to 220 DPI (178 degrees viewing angle). It also supports of the resolutions on the scale of 1920 by 1200, 1680 by 1050, 1280 by 800 and 1024 by 640.

    See also: how can you 'strength' or 'hack' the Retina Display MacBook Pro models running at the native resolution or otherwise more on screen that adapt default?

    2 screen support: Double/mirror *. 2nd Max Resolution: 2560 x 1600 (x 2 *)
    Details: * This model supports a simultaneous maximum resolution up to 2560 x 1600 on two external displays via Thunderbolt. Alternatively, it can support a single screen up to 2560 x 1600 per Thunderbolt and one display up to 1920 x 1200 through HDMI. Although it can theoretically supply all the three external displays, such as confirmed by a useful player, it runs too hot with three connected screens.

    http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.7-15-early-2013-retina-display-specs.html

    Although I think I read some hacks to make 4 K @ 30 fps.

  • Multiple poster on MacBook Pro (retina) end 2012

    Hey friends,

    I'm trying to put up in my office and I would like some insight or feedback if the following configuration will work for me.

    I have a MacBook Pro 15 "with the retina display (end of 2012) and want to connect:

    2 x 29 "Samsung Ultra Wide monitors LS29E790CNS/EN (http://www.samsung.com/uk/consumer/it/monitor/curved-monitor/LS29E790CNS/EN) 2-port Thunderbolt on my laptop over a 3rd Samsung TV UE40JU7000 (http://www.samsung.com/uk/consumer/tv-audio-video/televisions/uhd-tvs/UE40JU7000 TXXU) via the HDMI port on my laptop."

    All these will be connected through the horizontal Hengedock dock (https://eu.hengedocks.com/pages/horizontal-macbook-pro-retina)

    This configuration will work as I'm a believer or would I have problems? Anyone tried this configuration that could give me your comments?

    Thanks in advance for any help you could give me.

    Hello Jofcom.

    Thank you for using communities Support from Apple. I see that you want to use your MacBook Pro (15-inch, mid-2012 retina) with several external displays. I would like to help.

    I would like to share your MacBook Pro specifications techniques page.

    MacBook Pro (15 inch, mid-2012 of the retina) - technical specifications

    Graphics and video Support section indicates that your MacBook Pro supports up to two external displays:

    -Intel HD Graphics-4000.
    -NVIDIA GeForce GT 650 M with 1 GB of GDDR5 memory and automatic switching.
    -Double display and copy video: support simultaneous native resolution on the built-in display and up to 2560 x 1600 pixels on up to two external displays, with millions of colors.

    Have a great day.

  • You just bought a macbook pro retina. Why the resolution of the camera is terrible?

    You just bought a macbook pro retina. Why the resolution of the camera is terrible? Is there a solution?

    The facetime camera is only 720 p, which is 0.92 megapixel. Same 1080 p is only 2.07mp.

    It's really designed only for video calls, if you really want to make HiRes video on the internet.

  • MacBook Pro does not stop.

    My MacBook Pro will be stop or restart.

    Hello, Steve840!

    Thank you for joining the communities Support from Apple! Looks like you have a problem closing the Mac. I know how it is important to be able to stop and restart the computer as well. Here are a few troubleshooting steps that you can try. Go through each of them at a time and see what step fixes the problem:

    • Try to determine if a particular application is the source of the problem. If an application always crashes when you stop and cancels the process then update or remove and reinstall the application. There could be a message that is displayed by saying that an app has cancelled the restart or shutdown. Read this article toForce an app to close on your Mac.
    • Perform a software update (open the App Store, then click on updates > update all).
    • Update any software that you have installed outside of the App Store. In general, open the app and choose Help > update > update software.
    • Make sure you have FileVault disabled (System Preferences > Privacy & Security > FileVault > turn off FileVault).
    • Open disk utility. Choose the main hard drive and click on check the disc. If there is no problem, click Repair disk.
    • Follow these steps to reset the management system (SCM) controller on your Mac. This removes the startup items and conduct audits to see if something in the background can cause the problem. Don't forget that you can always press and hold the power button on the MacBook, until it stops to completely power off to restart.
    • Follow these steps on How to reset the NVRAM on your Mac.

    See you soon!

Maybe you are looking for

  • Firefox has crashed - clean install did not help

    Firefox crashes a few seconds after I start it. A report is presented each time. Here are the 5 latest ID: Crash ID: bp-4b27730b-61c7-4bf5-b779-e87662151208Crash ID: bp-fc310ba0-0916-413a-84d6-5adb52151208Crash ID: bp-9e05d394-ac66-41d2-8a89-e21e5215

  • thin horizontal black line down page what scan on HP Officejet Pro 8600 more

    I've owned an HP Officejet Pro 8500 and scan was perfect.  I recently bought a HP Officejet Pro 8600 Plus. When I scan from the ADF HP 8600, I get a thin (several pixel wide) black along the lower edge of the analysis that results.  This line will be

  • custom component buffers corrupt

    Hi, when I try and create a custom through part of hole in ultiboard, created tampons have 2 interiors - in all ready components created by holes just up and down - I do not know what are these interiors. I use the wizard of the part which seems to w

  • Error Windows vista update 9 c 48 during the installation of Internet Explorer 9

    Original title: windows vista update 9 c 48 error I tried several times to run the update that was trying to install internet explorer 9, but kept getting error 9 48 May I ask why?

  • Migration phase 3 DMVPN with Central Hub

    I'm looking at the migration of my network DMVPN phase 2 phase 3. The current system contains 3 regional poles each serving about 100 rays. The final goal is to be able to build tunnels speaks to talk between sites that are hosted to the hubs in diff