Error Windows vista update 9 c 48 during the installation of Internet Explorer 9

Similar Questions

• Windows Vista update (April 1, 2011) now the computer will not boot.

  1. Windows Vista update (April 1, 2011) now the computer will not boot.  Love updates been invited but now computer does not start. Just gets up to a certain point, and then restarts. Impossible to start safe mode! Don't know what to do, please help!

  Hi Ema1976,

  Do you have an error message when you try to start?

  Step 1: Disable the automatic restart of the menu advanced startup options and then enter the error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: Follow the steps mentioned in the link below to access system recoverytools and run the Startup Repair tool again.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

   

• Internal Error 2908 {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} during the installation of a program

  Hi all

  I need help please. I get 3 errors when you try to install a program and I will include all of the below 3. Please help me get rid of this headache. Thank you.

  This is the first...

  Internal Error 2908. {837EE547-6D3B-7124-817B-A0DDC38CDA99}

  When I select OK I then get this one

  Internal Error 2908. {182C2188-3F15-CE6C-1FC2-23A0CB4637D1}

  If I hit OK once again I get a different error...

  Error 1935. "An error occurred during the installation of assembly ' vdFramedControl, Version ="6.1.60117.0", Culture ="nuetral", PublicKeyToken ="54EAC14E23C9EE53", ProcessorArchitecture = x 86." Please see Help and support for more information. HRESULT: 0X8002802F.

  It drives me crazy and I don't know what to do. Thanks in advance for any help that you could provide.

  Hi KelMil,

  1 Windows operating system you are using?

  2. what software are you trying to install?

  Method 1:

  You can consult the following thread link and try the steps Diana D December 1, 2010 and check if it helps.

  Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL,.

  Method 2:

  You can also try to give permission for the two above mentioned registry keys. Check for multiple entries, registry keys, and give permission to all keys.

  a. click Start, type regedit in the search box and press on ENTER.

  b. click on edit and select find and type the copy and paste the registry key: {837EE547-6D3B-7124-817B-A0DDC38CDA99} and click Next.

  c. right-click on the key component and select permission.

  d. click Add, type everyone and click ok.

  e. Select group or the user name one by one and check the complete control of the area for all.

  f. click apply, click Ok.

  g. check for multiple entries for the key. If one is present, then repeat the steps above to give perimmision to all keys.

  Note: You must give permission to the {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} key by following the steps mentioned above.

  h. restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• Receive error message "cannot find volume of extraction" during the installation of products of microcoft"

  When I download... NET or windows install it downloads fine but when I click Run to install I get "cannot find volume of extraction" make sure you have the right permission. This does.nt occur on all facilities but it is in the Sub microsoft windows update installs and direct installs the Center.ce to download just started a few weeks ago and I tried everything in my power to correct without result.

  * original title - what is and solution to "cannot find volume of extraction" during the installation of products of microcoft? *

  Hi howardchampion,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/i-am-trying-to-install-Microsoft-Silverlight-and/920f7b7a-E926-47B5-acc4-e8dfbc548696

  I hope this helps!

• Windows Vista updates suddenly stopped working and the message appears to me to be the victim of pirated software - error: 0x80070426

  Message came that said my copy of Vista can be victim of piracy and go online to validate that, I did it because I have been using this OS for more than 3 years on a Toshiba laptop with Windows Vista Home Premium 32-bit p2000 series. a few hours later my computer said it needed to restart and once it restarted it has a black screen with a message that he was trying to repair. It could not be repaired so he asked if ok to go to a restore point and clicked on Yes. I get the message that my copy is not genuine and my computer wants to restart once again, but I'm the delay of four hours. I did the command line to try to restart the service and access has been denied. 0x80070426. I found an ad on the forum and tried the steps there, but he failed. Mistake was 54. http://social.Microsoft.com/forums/en-us/genuinevista/thread/de089d6e-63b4-4D6E-b955-30bb8e9525d3. I had to contact support and have been waiting for more than 24 hours for assistance. My Control Panel opens and goes away, but I could remove tweetdeck which is among the most recent installations of software I did before this all happened. I am also running xampp on my desktop and I tried to put in place a virtual host by using a different port - could not get that to work and changed the host to the original file. Could it be the problem? I hope I did not reinstall my OS and destroy my computer :-(I also ran Microsofts diagnostic tool and write it here:

  Diagnostic report (1.9.0006.1):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0
  Validation code online: 0x80070426
  Cached Validation code: n/a, hr = 0x80070426
  Windows product key: *-* - JQMWD - 2QJRJ-RJ34F
  The Windows Product Key hash: R8gPTEFMoOygFewoq/uOoWMpz68 =
  Windows product ID: 89578-OEM-7332157-00237
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6001.2.00010300.1.0.003
  ID: {E57BD23E-724F-49E7-ACE4-57DC9E2AB49E} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6001.vistasp1_gdr.090302 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  WGATray.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E57BD23E-724F-49E7-ACE4-57DC9E2AB49E}1.9.0006.16.0.6001.2.00010300.1.0.003x 32*-*-*-*-RJ34F89578-OEM-7332157-002372S-1-5-21-3871005671-4011101567-1094615180TOSHIBASatellite P205DTOSHIBAV1.0020070814000000.000000 + 00081333507018400FE04090409Time(GMT-08:00) Standard Pacific03TOSCPLTOSCPL00100100Microsoft Office home and Student 2007126B5697EF2510F1AMwy5C4A7Uv VTGRBwWVjHvNqHks plus 81602-909-4685496-68058 1

  Content Spsys.log: 0 x 80070002

  License data-->
  Software Licensing service is not working.

  --> HWID data
  Current HWID hash: NgAAAAEABAABAAEAAQABAAAAAwABAAEA6GGqskaeSvGGg5CmuJF0htam8vSSKt4YXv6sVniq

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP TOSCPL herring
  HPET PTLTD HPETTBL
  MCFG MCFG PTLTD
  TCPA TOSCPL
  SLIC TOSCPL TOSCPL00
  SSDT PTLTD POWERNOW
  ASF!               DMA AMDTBL

  Thanks for any help!

  ebflute

  Hello Ebflute,

  I suggest that you perform a repair installation.

  Repair facility:

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this still does not resolve all problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) (if this is not successful.)

  <><><><><><><><><><><><>

  Please make sure that you back up all the important data before you continue. Please visit: methods for your backup files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Windows vista update 8024402C

  I could not install the update since June this year. The error message says: Windows could not search for new updates. 8024402C error code. I followed the suggestions in the help section to fix the problem by selecting 'Automatically detect settings', but the problem persists. Help, please.

  Hello

  Please use the forums of answers.microsoft.com

  Windows Update Error Message Description:
  The 0 × 8024402 C code error occurs usually because an incorrect character exists in the proxy replace parameters.

  Possible Cause/s for the question:

  1. temper are in substitution of proxy settings.
  2. a misconfigured Proxy/Firewall can cause this problem.
  3. you try to access Windows Update using VPN. The Web site and automatic updates may not work correctly.
  4. the business environment has not put autoproxy implemented.
  5. your workstations to sit behind a Microsoft ISA Server.

  Here are the resolutions for the issue.

  Method 1:

  Turn on "Automatically detect ISA Server" in ISA
  Firewall client
  If you use Microsoft ISA Firewall Client, turn on the automatically
  ISA server detection function. To do this, follow these steps: 1. in the control
  Panel, Firewall Client of double click or right click on the ISA Firewall Client
  icon in the notification area.
  2. click on configure.
  3. Click to select the automatically detect ISA Server check box.
  4. click on update now and then click OK

  Method 2:

  Remove invalid characters from the list of exceptions to the proxy, and then clear the proxy cache:

  1. open Internet Explorer.
  2. on the tools, select Internet Options.
  3. click on the Connections tab.
  4. click on LAN settings.
  5. click on the Advanced button.
  6 remove any entry in the Exceptions section.

  Then, clear the cache of your proxy:

  1. click on start and then click Run.
  2. type cmd in the Open box to get a DOS command prompt.
  3. type proxycfg d at the command prompt, and then press ENTER.
  4. type net stop wuauserv to the command prompt, and then press ENTER.
  5 type net start wuauserv to the command prompt, and then press ENTER.
  6. now try the site again.

  Method 3:

  Reconfigure or update your firewall program:

  1. check the Proxy/Firewall settings. Add the following URLS to the list of exceptions in your firewall/Proxy:

  http://*.windowsupdate. Microsoft.com
  https://*.windowsupdate. Microsoft.com
  http://download.windowsupdate.com

  Method 4:
  VPN and Proxy.
  You try to access Windows Update using VPN. The Web site and automatic updates may not work correctly.

  AutoProxy is not recovering the wpad.dat proxy configuration file to determine the proxy server to use for the target URL. So let's without proxy!

  1. try to access Windows Update when you use don't no VPN connection.
  2. use the proxycfg tool to specify a proxy server to use (proxycfg.exe Pei ). (contact your network administrator to find out the name and port of the proxy.)

  Also check with the following link.
  http://www.updatexp.com/0x8024402C.html

  http://support.Microsoft.com/kb/822798

  That should solve the problem.

  Thank you.

  UDAY $012 please let me know if the solution worked or not I can improve, I thank you and appreciate your feedback, because it's the only one I can see I can improve.

• I reinstalled windows vista to factory default and during the analysis of the registry errors found 1395 errors

  I reinstalled windows vista to factory default and when parsing registry errors with norton utilities found errors in 1395. what I would do. I have to fix all the mistakes.

  Hi mohdrafi,.

  No need to panic. If you used another registry, cleaner, we could see 2000, 3000 or 4000 even depedning errors that the registry search cleaner. Registry cleaners are so reliable that I wouldn't even recommend them. In fact you don't need a registry cleaner and, contrary to popular reports, your registry "is not" increased cleaning performance. Registry cleaners are noted for the provision of many "false positives" it makes you wonder if the registry cleaner is saying 'what the devil I know, just delete this and the other and hope everything works eventually. My advice? Forget the registry cleaning!

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Failure of KB967912 Windows Vista updated 10 x today and the computer can't access internet

  My new ACER Vista Office tried to install this update 10 x, today. It started while I was working this afternoon. Until that moment, I had a complete connectivity via a cable CAT5e LAN accessing a router and cable modem. Later, I lost the first internet and local network access. Before that, I had worked with Firefox, Windows Media, and financial software and everything was accessed successfully the ' net. Then, I tried to configure Microsoft Outlook 2007 to get my email. His inability to access my cable provider was the first idea I had that I didn't have connectivity.

  Each time, I had the exclamation point on the stop switch and Vista stops with the view that he was installing "Update 1 of 1. However, whenever I rebooted the update didn't install.  Also, I had to restart my modem and router every time to regain access to the internet for short periods of time; in less than 4 to 7 minutes, all access to the internet is lost again. The error code was Code BC2 the last couple of times, but before that I also got error Code 80200053 when an Office update also failed to install. (I was able to install the Office update successfully, after another restart and cycle the modem to regain power connectivity).

  Help! FYI, I had to find another computer even to post this question!

  Ann

  Hi AnnFr,

  Thanks for posting the question.

  The KB967912 refers to the essentials automatic updates. A workaround for this problem is uninstall all MSN "stuff", resettlement using the latest version, which includes this update.

  To download the latest version visit this site:
  http://download.live.com/

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows XP refuses to copy files during the installation of the OS; gives error 800b0100 at the end... Uh, help?

  As stated in the header, various dll refuses copy during installation of Windows XP. And after use to ignore files completely, I find myself with a white box that produces the error 800b0100. At first I thought it was a hard drive problem, but after having tried with half a dozen other readers, I learn that maybe this isn't the case. Any ideas?

  Hi ReeseKaine,

  It seems that the installation disc is damaged. I recommend you make arrangements for a Windows XP installation disk that corresponds to the same edition, as it is installed on your computer.

  
  Reference: install Windows XP

  How to install or upgrade to Windows XP

  Hope the helps of information.

• Computer Windows Vista lost Wi - Fi capacity during the night

  I am running WIndows Vista on a HP Pavilion laptop.  I had no problem with the machine, Vista or my connection Wireless until this morning.  Wireless has worked until I stopped last night, but when I booted up and logged on this morning, it was gone.  When I went to the network to find out why, he had this message:

  "This computer does not have an installed and configured wireless network card.

  In Device Manager, it tells me my NVIDIA nForce Networking Controller "works correctly.

  Someone at - it ideas?

  Also - on a strange note, this help page flashes almost constantly-is that occur with anyone else?

  Thank you
  Paula

  Hi proegge,

  Some HP laptops have a switch on them to activate the wireless on and outside and they are not very obvious.  I would check that first.

  You said that a help page will flash constantly?  When you are on this forum or you tell whenever you use the computer.  You see what the help page?

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• Installation of Windows 2003: cannot find hard drive during the installation units

  Hello

  I found a strange question here...

  ESXi 4.0 installed on DELL R710 with 2 processors E55xx.

  Then we try to install a virtual machine with Windows 2003.

  The installation cannot continue because the virtual machine cannot detect the disk (virtual disk).

  Are we have to use specific drivers (as the old way install Windows Server 2003 on the physical, press F6, and then insert the drivers for drivers, etc2)

  Please advice...

  I have attached the error and the configuration of the VM

  For Windows 2003, the default controller is the parallel of LSI Logic. For this one, the drivers are already included in Windows 2003.

  André

• Error Windows vista update 8024401 b

  After you have selected the updates when I click on download and install, the download fails with a 8024401 b error code.

  Help, please.

  Try to reset the windows update components.

  http://support.Microsoft.com/default.aspx/KB/971058?p=1

  All the best!

• Error code 0 x 8 x 244019 during the installation of Windows updates

  I can't install the windows updates. I get this error message, 0 x 80244019. What can I do to fix this?

  I can't install the windows updates. I get this error message, 0 x 80244019. What can I do to fix this?

  What did you do to try to fix it?
  What has changed between her works and does not?
  (In other words, when did you notice this and what happened before?)
   
  Tried a system restore to a time where it has worked?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start a command prompt
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

   
  STILL no?

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start a command prompt.
  2. Run the following commands pressing on enter after each line:
     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try updates.

  If it still does not work after that - repeat

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  ... once more. Restart and try to get updates again.

  In any case: back - let everyone know what is happening.

• get a windows installation error is not installed correctly during the installation of a 3rd - party in Windows Vista software

  I get an error message: windows install is not installed correctly during the installation of software 3 rd-party on Windows Vista Home Edition. Why I get this error and how to fix it?

  Hello

  I suggest you try the steps from the following link and see if that helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651#appliesTo