MacBook Pro screen turned white rose areas

Similar Questions

• MacBook pro screen turns off randomly?

  My 15 inch Macbook Pro 13 (obtained in new end 14 h & B, started using it at the beginning of the 15) has a screen which turns off at random (dim backlight is - I can see a slight difference when I actually turn off the laptop), in addition to the programs (audio abruptly stops, etc.). The computer is still on 'on' (Hum, backlight on) and it will overheat after a bit. I have to hold the power to restart. Resolutions of potential problems?

  Other things-

  1. It happens in bursts, which happens once and if I do the reboot thing and continue to use it, it will probably happen again in about 10 minutes, and if I continue to do, at some point it will extinguish almost immediately after I connect (but never before!...)
  2. Looks like CPU-consuming tasks cause this happens more frequently: However, I've never had it happen once during a vidchat on Skype or Hangouts, so I don't know? iTunes, it is more likely to occur while
  3. Seems to happen more often on the recharge of battery/no lower, but has recently been happening sometimes at 100%/plugged in.
  4. It is probably the material - I 10.9 update (question began, then like 2 months ago) to 10.11 and issue continue to occur.
  5. I suspected the battery, so I went to the Apple Store and the initial diagnosis found nothing at the edge of any
  6. He has been doing worse and worse - more frequently and (as mentioned) to high battery %s. Now I can almost guarantee an ooccurrence once every 3-4 hours of use.
  7. No, turning and the new does not help.

  Any help would be appreciated! Thank you: c

  Reset the PRAM.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

• MacBook Pro screen turns blue!

  How can I solve this problem?

  If you connect an external monitor and the mirrored display, which is display on the screen?

  This happens to you all the time?

• MacBook Pro screen WHITE white

  Hello

  My Mac Book Pro does not, restart after several restart and safe mode. Apple logo, green line bar proceeds at the end and screen turns WHITE.

  Need help - please.

  Thank you.

  Mac OS X - grey appears during startup

  Address start up your Mac to a gray screen. MacIssues

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Hi janeslens,

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.
  • Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom

  Let me know if it helps.

  Kind regards

  Tanuj

• When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  HELP me get my E mail.

  When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  http://INFOTEP.bee.pl/info.php?avted=;     I'm not that day on computers, and many of their functions and a few times I get a little lost in there so if anyone can help me I really appreciate it.    Thank you!!!

  Hello

  1. what operating system do you use?

  2. What mail client do you use?

  3. you have made any changes to your

  4. what site you're talking about?

  5. How do you access the webpage?

  6. you use Internet explorer or another browser to access the site?

  The link give http://infotep.bee.pl/info.php?avted takes me to a blank Web page

  Are you referring to http://www.bee.pl/index

  Refer to the following, who says that the sites host malware

  http://www.Google.com/SafeBrowsing/diagnostic?site=monidopo.bee.pl/

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• How to keep the Macbook pro screen and cin on position?

  How to keep the Macbook pro screen and computer in position 'on '.  I don't want the computer shuts down or cut unless I ask him to...

  If you talk to keep your machine to fall asleep, take a look at the caffeine.

• Re: NB200 - making noise and the screen turns white

  Hello

  My laptop makes the high pitched noise and the screen turns white. Please help with this question.

  Thank you

  Hello

  It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

  Welcome them

• Satellite L300 PSLBGE screen turns white after a while.

  I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
  I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...

  sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.

  Please help for this problem

  Post edited by: bharatjaiswal5

  Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
  In my opinion you should try it because it could be a problem in the system.

  Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.

• 11 - e010nr after the signature on the photo and a few icons appear and then the screen turns white and reappears

  Laptop TouchSmart 11, e010nr 11, windows 8, no error message. I can Ctrl/alt/del and obtain the lock... the Task Manager screen. This screen works but nothing else

  Hi danny61,

  Just to clarify , when your screen turns white and reappears, the icons reappear also? and do you not see that set the desktop background or the taskbar? that it could be as simple as restarting the Explorer process in the Task Manager.

  If you can update me if I can see how I can help

• When trying to view videos full screen, the screen turns white!

  When I try to watch videos, I love to watch full-screen, but when I press the icon full screen the screen turns white. I have to press the ESC key to return to normal. What will fix this?

  i right click on video > select settings > remove the check mark from material

  Acceleration.
   
  II] download and install: -.
  Adobe flash player: -.
  http://www.Adobe.com/products/flashplayer/
   
  III] update your graphics card driver on the website of the manufacturer of the graphics card.

• P2412H - displayed briefly and then the screen turns white.

  Hello

  I got a pair of monitors of P2412H little more 3 years, bought from a dealer - I don't have tags and monitors say manufactured in September 2011 (so I think that, apart from any warranty).

  This morning one of them has failed - it displays briefly, then the screen turns white.

  Manual test:

  1 unplugged every wire and power button which is held for 15 seconds.

  2 reconnect the power cord.

  -Switch will blue

  -L' initial Dell boot screen is displayed on the screen for less than a second.

  -L the screen turns white.

  -Stays blue power button

  3. press one of the control buttons

  -Nothing happens

  4. disconnect the monitor

  5. connect the monitor to on PC with Windows connected using DVI.

  6. connect the power cord

  -Switch will blue

  -L' initial Dell boot screen is displayed on the screen for less than a second.

  -L the screen turns white.

  -Stays blue power button

  I also tried to reset the monitor according to the instructions of the manual by pressing keys 1 and 4, but as the monitor does not appear, I couldn't see anything.

  The monitor did briefly revived properly after one of my attempts back manually, but the after turning on and the new to check if the problem itself had set the monitor returned to the not displaying no not again.

  Can anyone help or point me in the right direction on how to fix it?

  Thank you

  * UPDATE *.

  Disassembled the monitor I've used this as a guide to youtube to open the monitor the safely:

  cs_setInnerHtml ('video_aebd897a-01ed-42eb-a8c5-b3b6ecee6556', ");

  Inspect the circuits printed for all the obvious problems such as cracked soldering or fried capacitors.

  Could not see the obvious problems... you realign a couple of back vertical capacitors where some of them were in sharp corners appeared to be very close together as a result.

  Back together carefully.

  Backwards and now it works very well for 48 hours.

• BlackBerry Smartphones do - what do I do when the blackberry starts to load, but then the screen turns white

  A couple of weeks, I have recharge my phone and he kept on his auto turn off or not charging well so when I rang Virgin they told me to buy a new battery I did, I loaded the new battery in another phone blackberry by following the instructions at and when I got the new battery for my blackberry torch It started to load as usual but the screen turned white and it turn off its self.

  You need to ring up Virgin again and explain to them that it was not the battery because of your questions.  It is for them to take in charge your device and, as appropriate, to support RIM to get is resolved.

• MacBook Pro 2015 turns on but the screen remains black...

  Hello

  Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

  Could someone help me please?

  Also a few minutes ago the fan has started to make noise in the macbook...

  But the screen remains black.

  Thank you

  Shaynidw

  Hi shaynidw,

  From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

  On the screens you see when you start your Mac

  Power on

  

  When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

  White screen

  

  After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

  shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

  In addition, you can try to start your computer in safe mode to see if you get different results.

  Try safe mode if your Mac does not end commissioning

  If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

  Take care.