MacBook showing only not as trusted device

Similar Questions

• Airport not showing is not as network device?

  My Airport Extreme 802.11ac does not appear in the finder as a network device. It showed in the previous Extreme model I was using, then leave for any reason any. After messing around for a month or two, then trying to get it working again, I bought the new 802.11ac AE, but it does the same thing.

  I have two other devices that appear in the finder under the shared part of the side bar of the Finder window, but cannot figure out how to show by EI. The wireless feature works very well, as a printer BSE connected to the USB port of the AE. Internet

  It would be different if I was using the IP address of the type 10.x.x.x instead being in bridge mode and using 192.168.1.X?

  Any suggestion is appreciated.

  My Airport Extreme 802.11ac does not appear in the finder as a network device

  In the finder it will show only upward if you have a connected USB drive.

  It showed in the previous extreme model that I used

  Only if you have the network resources available to him.

  Computers will be displayed, because they offer resources network, the PF to be exact.

  But the airport will not be displayed. Mine is not, and never has.

  My Time Capsule arises because it is a hard drive offering services of files on the network.

  Printers will not appear in the finder no longer...  Again, I have printers online... they do not show in finder and never have any version of Mac OS X, I used.

  However a printer with USB or SD card slots and a wired card which offers services of files on the network may appear... In the only finder services files will be displayed.

  EI has to offer network file services appears in the Finder... Plug a USB stick into the USB port and set it to share on the network and the AE will then appear in the finder.

  The place that you are looking for your AE's utilitarian Airport... It's the Apple of method available to see you the configuration of EI... no viewfinder.

• X 1 carbon i7 showing only 4 processors in Device Manager

  I just bought 4 X 1 carbon i7 and I noticed that the Manager device (Windows 7 64 bit) shows only 4 processors instead of 8.  My HP desktop computers, which are also i7, show 8 (4 physical cores, 4 cores, Hyperthreaded) processors.  The X 1 bios shows hyperthreading is enabled and the msconfig file does not limit the number of cores.  No idea how to re-enable the missing processors?

  Hello

  I just took a glance at the expedition of Tabukand the only X 1 options carbon i7 I see are dual-core:

  Processor Intel Core i7-3667U (2 hearts, 2.0 GHz, 4 MB cache), Intel HD Graphics 4000,
  (Up to 1600 MHz) DDR3 memory controller, Intel Turbo Boost 2.0 (3.20 GHz), HT technology

  There may be a quad-core option, but I'm not.  What is your type of machine (for example 1234-xyz)?

  Z

• Office mail sent blackBerry smartphones showing only not on Pearl - bt yahoo

  Hello people. Mail sent via account yahoo bt BB pearl 8110 appear ok in the box sent unit and sent box office. However email account bt work stations, shows ok on office sent box but not as a BB pearl point sent. Essentially of BB shows only items sent to your handheld, but I want to show him the sent items of office as well. Thanks in advance!

  Hello!

  Please see this link:

  KB05133 Features of the BlackBerry Internet Service email reconciliation

  Basically - WAD... Work as expected.

  Hope that helps... Well, at least helps to better understand.

  See you soon!

• My account calendar shows only not in the calendar app

  Hello

  I have a problem with the calendar (version 18.6.A.0.1). When I open it, the calendar shows only birthdays my contacts, but I don't see my owncloud calendar, even though I can see and synchronize in the android account manager.

  In fact, I disabled the application of storage calendar, then created the resource calendar and finally turn back the calendar again storage application. So storage of schedule was a little lost after him.
  This problem is resolved by the deletion and recreation of the resource.

• USB flash drive shows only not in Windows Explorer.

  Hello

  I looked through all the other posts of undetectable usb flash drives but not talked about "Device Manager", where I can see the "F:" drive - I know not how to access because its not visible anywhere else.

  It is a simple flash 4 GB dongle, I'm on Windows 7 - it used to work properly and appear in my computer, but this isn't all of a sudden. It does not appear on other computers, but I can see it under ' devices and printers under "Mass Storage Device" - and "navigation files" gives me a gray would be on "removable disk F:"

  Have a formatting or something by accident or changed a setting that makes it invisible. Or is it just screwed!

  Help, please!

  Original title: can not access a drive USB flash but visible in "Devices".

  Hello Justin,

  Thank you for your response.

  Because the problem is specific to a specific USB key, I recommend you contact the
  Manufacturer and check with them.

• CC showing only not as upgrade option

  I have one your CC App for CS6, but CC shows is not an upgrade in the Help / Menu updates.

  Whewre can I get assistance from?

  Chris please download the new application of Creative https://creative.adobe.com/cloud.  Also, please ensure that you meet the system requirements for the version of the application cloud creative of any application that to which you are subscribed too.

• BlackBerry showing only not as mass storage device

  When I connect my blackberry to my Vista computer, it does recognize it as a storage device.

  Hi RodneyThomas,

  Do you get any error messages? What is the exact error message?

  ·         Find out which software and devices are and are not compatible with Windows Vista.

  ·         Look for links to drivers and upgrades that will make your compatible computer.

  Windows compatibility:

  http://www.Microsoft.com/Windows/compatibility

  Try to install the software by using compatibility mode:

  Run the program compatibility Wizard

  1. open the program compatibility Wizard the by clicking the Start button, click Control Panel, clicking programs, and then clicking on use an older with this version of Windows program.

  2. follow the directions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Similar problem applies please, check out the links below:

  http://www.BlackBerryForums.com/General-BlackBerry-discussion/6764-USB-device-not-recognized.html

  http://www.BlackBerryForums.com/General-BlackBerry-discussion/6764-USB-device-not-recognized.html

• Recording device shows only not in the sounds

  Separated from this thread.

  I tried the tips listed in previous post and have had no success. The microphone worked it previously and is internal in the PC appears now not at all. I would appreciate help, that you can provide.

  Hello Tony,.

  Please keep us updated on the issue.

  I would like to know some information about the problem so that we can help you further.

  What is the number and the model of the computer?

  I would ask you to try the following changes in the registry settings to check if the Microphone is disabled reading.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  STEPS to change the registry settings:

  1. Click Start, type regedit in the Start Search and press ENTER.
  2. Draw the following registry location: HKEY_LOCAL_MACHINE\System\ControlSet001\Control\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings
  3. Check if the DisableMicFromPlayback value is set to 1. If this is the case, then, change it to 0 and click OK.
  4. Close the registry editor and restart your system.
  5. Check if you are able to use the Microphone.

  NOTE: Please carefully follow article to back up and restore the registry before trying the above step.

  Hope this information is useful. Please post back your results for assistance.

  Thank you.

• messages not showing is not on all devices

  I have two computers and a smart phone, I use sometimes to check my email. I had messages download and see on a device and not on the other. I thought since it's an account they go on all messaging devices.

  Depends on the question of if you have set up your Thunderbird e-mail accounts to use IMAP or pop.

  If POP, then Thunderbird can only access and download from the server Inbox. It is normal to remove the copy from the server after download.
  So this means that if you access this account on another device or via webmail address, then the e-mails that you have downloaded will not be on the server, so you don't see them.

  Stop this is to make sure the email POP account to leave a copy on the server after download.
  Tools > account settings > server for pop e-mail account settings
  or
  Right-click on mailaccount pop in the folders pane, and then select "settings".
  then select "Server settings" for the pop email account.
  Select 'leave messages on the server.
  Click OK

  Please note that all emails you send will be only stored in Thunderbird, so you can not see the server. E-mails deleted in thunderbird has no effect on the e-mails still on the server, except if you have enabled this option in the server settings.

  Alternative, is to create email IMAP accounts.
  IMAP e-mail accounts show a remote view of the files on the server.
  you subscribe to view these folders.
  If you delete an email in a Thunderbird imap email account, then it is deleted on the server that the files are indeed, a same. Thus, other devices to connect to the server will not see email which has been deleted.

• updates show only not in programs

  Hello
  I have problems with the media center and media player on Vista Home premium. His research as corrupt files somewhwere along the line so I want to remove SP1 and reinstall it.
  Problem is that when I go to programs of the Control Panel, it shows no updates (Yes, I clicked on see the updates and it says no updates installed). I tried to install SP1, and he said: it is already installed.
  I have many other things go wrong like below

  media center does not start, said components are missing
  Media Player will not properly play video files, comes up with an error indicating that the file is in use, the file opens in the background without the sound and the only option in the error box is to close.
  System Restore does not work (do not remember the error message)

  All ideas welcome even if I do not see anything other than a clean install sort this one.
  Thanks in advance
  Shep

  Hello Shepturley,

  Thank you for using Microsoft Vista answers Forum!

  First of all, I suggest manually, download and install the SP1 update using the link below and if this does not solve your problem, I would say go ahead and repair Windows using the Windows Vista installation disc

  Download SP1

  Windows Startup Repair

  If please reply and let us know if your problem is resolved or if you need further assistance.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• The radial filter guide shows only not in the work area

  I upgraded to Lightroom CC on the release and recently made the last update.  Now my radial filter does not show in the work area.  I can turn it on in the selective settings panel, but there are no guidelines indicating the size/shape of the mask.  The mask shows when I check/uncheck the mask Show Overlay box or the 'o' key (keyboard shortcut), but still no guidelines.  Radial filter appears in the history panel as well.  The selective brush seems to operate normally.  I'm on an IMac using OSX 10.10.2 2013.  I quit and restarted Lightroom CC so that rebooted my machine.  I don't have this problem on my MacBook Pro that has been updated at the same time.

  Help, please!

  Phil

  Press H

• Files audio stereo plays only not on mono devices after rendering

  I have a stereo wav track recorded on a h5 zoom which is silent when played on a device that only play mono (most mobile devices). I've noticed that when I made and uploaded the video to YouTube and it plays fine on my PC but when I saw on my phone I got only the background music and audio interviews. I've scoured the web for similar problems, but nothing did. Someone must know how I can fix it. Here is a screenshot:

  

  As you can see, it's certainly a stereo file, but when it is made and posted on YouTube, mobile users have reported and I confirmed that the file is not playing. I've recreated the problem by making the video with mono sound and does not play the file. I must be missing something. Help, please! Thank you!

  There are several discussions in this forum about this, try this one:

  Re: Issue of Smartphone Audio

• Text fields show only not in Design or in Live View mode

  Hi all

  I ran into a problem when trying to create a simple through Dreamweaver CS6 contact form.  I have two text fields for the name & Email and 1 text box for comments.  The question that I am running is that text fields are not displayed in Design or in Live view mode.  I have installed all the required variables for the server for the form to work... but that shouldn't have any effect on the demonstration of text field...  I tried to download my contact page with the same result of no list of text fields...

  What is really laughable, it is that the "text box", that I placed in my form for comments appears in Design mode & Live very well.  I think I'm missing something, but don't know what exactly.  The form is rendered by CSS.

  Here is the code for the form:

  < div id = "CRDForm" >

  " < form action =" http://www.sweetformimi.com/FormMail/formmail.php "method ="post"enctype =" application/x-www-formulaires-urlencoded"name ="contact"target ="_self"id ="contact"> "

  < input type = "hidden" name = "env_report' value ="REMOTE_HOST REMOTE_ADDR, HTTP_USER_AGENT, REMOTE_USER and AUTH_TYPE">

  " < input type ="hidden"name = 'recipients' value = ' [email protected] "/ > "

  < input type = "hidden" name = "subject" value = "Contact form" / >

  Your full name p > < label > <

  < input name = "Name" type = "text" id = 'Name' size = "40" / > < / p >

  < / label >

  < label > < p > Email

  < input name = "email" type = "text" accesskey = "2" tabindex = "2" title = "Email" value = "Email" > < / p >

  < / label >

  < Label > comments < br / >

  < = cols 'comments' textarea name = "40" lines = "10" accesskey = "3" tabindex = "3" title = 'Comments' > < / textarea >

  < / label >

  < name of entry = 'submit' type = 'submit' accesskey = "4" tabindex = "4" title = "submit" value = "submit" >

  < / make >

  < / div >

  There are other variables that I should think in the rest of my site?  I use a checkerboard to fluid.  I have CSS for office, Tablet and phone devices.  I also have a primary CSS file that imports all three.  Structure sites was conducted through the use of < header >, < article >, < footer > and of course the < div > tags.

  Has anyone already has the "text fields" does not come before? Is this a simple fix like reinstalling Dreamweaver CS6?  Finally, another thing I should mention is that I had a previous version of Dreamweaver on my computer, which was of CS3.  I have do not uninstall before installing the latest version.  I assumed (and I could be wrong here) that it would automatically replace the old version.

  I apoligize for what it is long-winded, but I am looking for help on this issue...

  Thank you

  Take the code you have posted and insert it into a new document in Dreamweaver as it is, record and watch. The fields on the form show? If they do there is something else in your code or the css that is responsible does not appear in this case, we would need to see the entire page and css.

  For me the code in design mode and live mode view shows your form fields.

• Outgoing calls not showing does not on other devices of continuity

  I'm showing incoming calls (both missed and received) but no outgoing. I would like to have a complete call log on all my devices. Is this just how continuity works or am I missing something?

  I suggest relying on the Web site of your mobile operator for more information on all outgoing calls.