Machine sounds a different number of dings whenever I start windows

Similar Questions

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• System32 folder opens whenever I start windows.

  I have a seven year old desktop computer.  He had to undergo some repairs of equipment and I had to re - install everything from scratch.  The operating system is Win - XP with service pack 3 and all the updates available have been applied.  Office 2007, Adobe reader, VLC player, AVG antivirus, browser firefox and 7-Zip are additional programs.  Well, other things such as Java, .net or other things that are needed for navigation are also installed.

  Since the time that this re - install windows has been done about a month before, whenever I start, the folder named "System 32" opens.  It does not show the content (they are hidden, as is highlighted by the post about that) - and, the additional message to say that you should not modify the contents of this folder is also there that.  Just click on the Red 'X' mark on this window, and it closes.  No problem.  But it's annoying to see that at every start up.

  Can someone advise please how to avoid this file opens at each startup?

  You need to change a key to register, or here http://support.microsoft.com/default.aspx?scid=kb;en-us;170086
  or download a script here http://www.kellys-korner-xp.com/xp_tweaks.htm read the beginning of the article and then scroll to the 260 item in the right pane.

• My desktop icons are flashing very quickly whenever I start Windows

  I used the Scanner Microsoft to scan my computer because my Norton was not picking up anything because I knew that something was wrong (Yes Norton is up to date). The Microsoft Safety Scanner picked up 4 Trojan horses and he said that it had removed the. Usually, icons glitter automactically office if I simply click on the desktop and don't stop until I click on the bar tasks. I clicked on the desktop after that viruses have been filed to see if that was the problem and flicker more. I thought that I had finally fixed my computer until I turned on today and after Windows starts he has started making new flicker. I also tried the system restore, and he said that it was not successful. If it wasn't the virus that was causing it, so what?

  P.S. I'm running on Windows Vista SP2 and I'm not sure of the brand or model of my monitor, but I know it's the driver that he has "Dell ST2210 (analog)" and the driver who is the graphics cards is "ATI Radeon HD 4350". My computer is a Dell Studio 540 and it is a desktop computer.

  Hello

  1. do you have the question persists in clean boot mode?

  2 - is the screen flickers or icons on the screen flickers?

  Method 1:

  If the screen flickers, try changing the refresh rate of the monitor

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2:

  If the problem is not resolved, I suggest to create a new user account and check if the problem persists.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the new user profile resolves the problem, you can fix the corrupted profile.

  Reference:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Order a different number of prints for each image

  If there is a way to order prints of different images different number?

  Say I want to order a print of all my images in a collection of 4 x 6, simple enough.

  Then, I want to order some of them also in format 8 x 10, also quite simple.

  But what I can't find out how to order say;  3 copies of the #4 8 x 10 image, 2 copies of the #5 8 x 10 image and 10 copies of the image #14 in 8 x 10.

  Something I m missing?

  Any help is appreciated.

  Thanks in advance.

  • The options button lets you change the number of prints for each selected photo.
  • The 'add pictures and change print sizes' button allows you to add additional formats and you can even select different amounts for each size.

  See this help page: https://help.apple.com/photos/mac/1.0/?lang=en#/pht6e15ea68

  

• I use an IPhone 5. My screen is empty. White color. Calls from if composed of a different number, but cannot respond. What can I do to fix this?

  I use an IPhone 5. My screen is empty. White color. Calls from if composed of a different number, but cannot respond. What can I do to fix this?

  Have you tried to reset the device? Keep holding the home and power buttons at the same time and continue to hold until the Apple appears (compared to 30 seconds - really). If you see the Apple, the reset is progressing and the Slide to Unlock screen will display shortly.

  See you soon,.

  GB

• Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

  Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

  The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

  Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

  00CE error: Machine Type and serial number is INVALID

  Start of manufacturing sequence is taken if no selection is made

  I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

  The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

  On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

  Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

  My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

  When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

  Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

  Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

  I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• generate two different number

  How can I generate two different number? The first should always be greater than the second.

  Only itegers or also fractional/decimal numbers?  Any real range of values that you can use?

  I just generates two numbers (based on the settings you can have) and then use Max & Min to sort them.

• 6602 synchronized with a different number of pulses per channel pulse generation

  Hello

  I try to use counters NI 6602 to generate 4 pulse trains that begin together but then proceed with each counter producing its own number of pulses (over mode) with its own frequency.

  It seems that each of the 4 channels of wiring at the same special teams each channel to produce the same number of pulses based, apparently, on which channel was recently with the specified NumPulses value so that it is the (implicit) VI DAQMx Timing.

  I tried to use separate tasks for each channel, but it seems that the there is much more uncertainty in the initial start of the train of impulses on each channel: unique task ~ 13us (coherent) delay between channels, a task for each channel (variable)... Although I'm not entirely confident in these temporal measures (estimates of the oscilloscope) +-15us. So it seems I'm sacrificing some synchronization to produce a different number of impulses for each channel?

  Is it true, or is there another way to match the beginning of the independent pulse trains.

  Vadim

  You should be able to synchronize the start of 4 separate meter output tasks by having all the

  looking for a common startup trigger signal.  You can easily do yourself the trigger signal on

  (for example) PFI_0 using a digital task rocking DIO_0.

  -Kevin P

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• Whenever I start my PC, I get a Windows program that is trying to install what is called a sound Module of Activation.

  Original title: Windows Sonic Activation Module.

  Whenever I start my PC, I get a Windows program that is trying to install what is called a sound Module of Activation. He asks I insert the disk and the only way I can get to go is repeatable keep hitting the choice to cancel again and again until it finally disappears. How can I get this feature to disconnect and stopped trying to load thios program I have ever heard of.

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19342454.aspx

  This is if you have a Dell.

  Do you have?

• EqualLogic GroupManager displays a different number of replicas, 2 outgoing and incoming 1.

  GroupManager displays a different number of replicas, 2 outgoing and incoming 1.  Is this a normal behavior?

  

  I raise this question to technical assistance from Dell.  They checked with their lab environment and confirmed the same behavior.  There is no functional cause whose status is displayed like this.  Two points, they said:

  (1) the number of the line leaving includes the history of replication.   It will show you an extra line in addition to the number configured in the replica set. (in my case, it's 1 (configured) + 1 (extra), so 2 total)

  (2) the number of the replica by entering the real number of replica set used for the function of data redundancy.

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• The sound of my PC is gone, whenever I restart my computer. How can this be repaired?

  The sound of my PC is gone, whenever I restart my computer. How can this be repaired?

  Hi Emilongo,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow the steps in the article.

  Tips for solving common audio problems

  No sound in Windows

  For reference:

  Sound cards: frequently asked questions